Provided by: s3fs_1.86-1_amd64 
NAME
S3FS - FUSE-based file system backed by Amazon S3
SYNOPSIS
mounting
s3fs bucket[:/path] mountpoint [options]
s3fs mountpoint [options (must specify bucket= option)]
unmounting
umount mountpoint
For root.
fusermount -u mountpoint
For unprivileged user.
utility mode (remove interrupted multipart uploading objects)
s3fs --incomplete-mpu-list (-u) bucket
s3fs --incomplete-mpu-abort[=all | =<expire date format>] bucket
DESCRIPTION
s3fs is a FUSE filesystem that allows you to mount an Amazon S3 bucket as a local
filesystem. It stores files natively and transparently in S3 (i.e., you can use other
programs to access the same files).
AUTHENTICATION
s3fs supports the standard AWS credentials file
(https://docs.aws.amazon.com/cli/latest/userguide/cli-config-files.html) stored in
`${HOME}/.aws/credentials`. Alternatively, s3fs supports a custom passwd file. Only AWS
credentials file format can be used when AWS session token is required. The s3fs password
file has this format (use this format if you have only one set of credentials):
accessKeyId:secretAccessKey
If you have more than one set of credentials, this syntax is also recognized:
bucketName:accessKeyId:secretAccessKey
Password files can be stored in two locations:
/etc/passwd-s3fs [0640]
$HOME/.passwd-s3fs [0600]
s3fs also recognizes the AWSACCESSKEYID and AWSSECRETACCESSKEY environment variables.
OPTIONS
general options
-h --help
print help
--version
print version
-f FUSE foreground option - do not run as daemon.
-s FUSE singlethreaded option (disables multi-threaded operation)
mount options
All s3fs options must given in the form where "opt" is:
<option_name>=<option_value>
-o bucket
if it is not specified bucket name (and path) in command line, must specify this
option after -o option for bucket name.
-o default_acl (default="private")
the default canned acl to apply to all written s3 objects, e.g., "private",
"public-read". see https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-
overview.html#canned-acl for the full list of canned acls.
-o retries (default="5")
number of times to retry a failed S3 transaction.
-o use_cache (default="" which means disabled)
local folder to use for local file cache.
-o check_cache_dir_exist (default is disable)
If use_cache is set, check if the cache directory exists. If this option is not
specified, it will be created at runtime when the cache directory does not exist.
-o del_cache - delete local file cache
delete local file cache when s3fs starts and exits.
-o storage_class (default="standard")
store object with specified storage class. this option replaces the old option
use_rrs. Possible values: standard, standard_ia, onezone_ia, reduced_redundancy,
and intelligent_tiering.
-o use_rrs (default is disable)
use Amazon's Reduced Redundancy Storage. this option can not be specified with
use_sse. (can specify use_rrs=1 for old version) this option has been replaced by
new storage_class option.
-o use_sse (default is disable)
Specify three type Amazon's Server-Site Encryption: SSE-S3, SSE-C or SSE-KMS. SSE-
S3 uses Amazon S3-managed encryption keys, SSE-C uses customer-provided encryption
keys, and SSE-KMS uses the master key which you manage in AWS KMS. You can specify
"use_sse" or "use_sse=1" enables SSE-S3 type (use_sse=1 is old type parameter).
Case of setting SSE-C, you can specify "use_sse=custom", "use_sse=custom:<custom
key file path>" or "use_sse=<custom key file path>" (only <custom key file path>
specified is old type parameter). You can use "c" for short "custom". The custom
key file must be 600 permission. The file can have some lines, each line is one
SSE-C key. The first line in file is used as Customer-Provided Encryption Keys for
uploading and changing headers etc. If there are some keys after first line, those
are used downloading object which are encrypted by not first key. So that, you can
keep all SSE-C keys in file, that is SSE-C key history. If you specify "custom"
("c") without file path, you need to set custom key by load_sse_c option or
AWSSSECKEYS environment. (AWSSSECKEYS environment has some SSE-C keys with ":"
separator.) This option is used to decide the SSE type. So that if you do not
want to encrypt a object at uploading, but you need to decrypt encrypted object at
downloading, you can use load_sse_c option instead of this option. For setting
SSE-KMS, specify "use_sse=kmsid" or "use_sse=kmsid:<kms id>". You can use "k" for
short "kmsid". If you san specify SSE-KMS type with your <kms id> in AWS KMS, you
can set it after "kmsid:" (or "k:"). If you specify only "kmsid" ("k"), you need
to set AWSSSEKMSID environment which value is <kms id>. You must be careful about
that you can not use the KMS id which is not same EC2 region.
-o load_sse_c - specify SSE-C keys
Specify the custom-provided encryption keys file path for decrypting at
downloading. If you use the custom-provided encryption key at uploading, you
specify with "use_sse=custom". The file has many lines, one line means one custom
key. So that you can keep all SSE-C keys in file, that is SSE-C key history.
AWSSSECKEYS environment is as same as this file contents.
-o passwd_file (default="")
specify the path to the password file, which which takes precedence over the
password in $HOME/.passwd-s3fs and /etc/passwd-s3fs
-o ahbe_conf (default="" which means disabled)
This option specifies the configuration file path which file is the additional HTTP
header by file (object) extension.
The configuration file format is below:
-----------
line = [file suffix or regex] HTTP-header [HTTP-values]
file suffix = file (object) suffix, if this field is empty, it means
"reg:(.*)".(=all object).
regex = regular expression to match the file (object) path. this type
starts with "reg:" prefix.
HTTP-header = additional HTTP header name
HTTP-values = additional HTTP header value
-----------
Sample:
-----------
.gz Content-Encoding gzip
.Z Content-Encoding compress
reg:^/MYDIR/(.*)[.]t2$ Content-Encoding text2
-----------
A sample configuration file is uploaded in "test" directory. If you specify this
option for set "Content-Encoding" HTTP header, please take care for RFC 2616.
-o profile (default="default")
Choose a profile from ${HOME}/.aws/credentials to authenticate against S3. Note
that this format matches the AWS CLI format and differs from the s3fs passwd
format.
-o public_bucket (default="" which means disabled)
anonymously mount a public bucket when set to 1, ignores the $HOME/.passwd-s3fs and
/etc/passwd-s3fs files. S3 does not allow copy object api for anonymous users,
then s3fs sets nocopyapi option automatically when public_bucket=1 option is
specified.
-o connect_timeout (default="300" seconds)
time to wait for connection before giving up.
-o readwrite_timeout (default="120" seconds)
time to wait between read/write activity before giving up.
-o list_object_max_keys (default="1000")
specify the maximum number of keys returned by S3 list object API. The default is
1000. you can set this value to 1000 or more.
-o max_stat_cache_size (default="100,000" entries (about 40MB))
maximum number of entries in the stat cache and symbolic link cache.
-o stat_cache_expire (default is no expire)
specify expire time (seconds) for entries in the stat cache and symbolic link
cache. This expire time indicates the time since cached.
-o stat_cache_interval_expire (default is no expire)
specify expire time (seconds) for entries in the stat cache and symbolic link
cache. This expire time is based on the time from the last access time of those
cache. This option is exclusive with stat_cache_expire, and is left for
compatibility with older versions.
-o enable_noobj_cache (default is disable)
enable cache entries for the object which does not exist. s3fs always has to check
whether file (or sub directory) exists under object (path) when s3fs does some
command, since s3fs has recognized a directory which does not exist and has files
or sub directories under itself. It increases ListBucket request and makes
performance bad. You can specify this option for performance, s3fs memorizes in
stat cache that the object (file or directory) does not exist.
-o no_check_certificate (by default this option is disabled)
do not check ssl certificate. server certificate won't be checked against the
available certificate authorities.
-o ssl_verify_hostname (default="2")
When 0, do not verify the SSL certificate against the hostname.
-o nodnscache - disable dns cache.
s3fs is always using dns cache, this option make dns cache disable.
-o nosscache - disable ssl session cache.
s3fs is always using ssl session cache, this option make ssl session cache disable.
-o multireq_max (default="20")
maximum number of parallel request for listing objects.
-o parallel_count (default="5")
number of parallel request for uploading big objects. s3fs uploads large object
(over 20MB) by multipart post request, and sends parallel requests. This option
limits parallel request count which s3fs requests at once. It is necessary to set
this value depending on a CPU and a network band.
-o multipart_size (default="10")
part size, in MB, for each multipart request. The minimum value is 5 MB and the
maximum value is 5 GB.
-o ensure_diskfree (default 0)
sets MB to ensure disk free space. This option means the threshold of free space
size on disk which is used for the cache file by s3fs. s3fs makes file for
downloading, uploading and caching files. If the disk free space is smaller than
this value, s3fs do not use diskspace as possible in exchange for the performance.
-o singlepart_copy_limit (default="512")
maximum size, in MB, of a single-part copy before trying multipart copy.
-o host (default="https://s3.amazonaws.com")
Set a non-Amazon host, e.g., https://example.com.
-o sevicepath (default="/")
Set a service path when the non-Amazon host requires a prefix.
-o url (default="https://s3.amazonaws.com")
sets the url to use to access Amazon S3. If you want to use HTTP, then you can set
"url=http://s3.amazonaws.com". If you do not use https, please specify the URL
with the url option.
-o endpoint (default="us-east-1")
sets the endpoint to use on signature version 4. If this option is not specified,
s3fs uses "us-east-1" region as the default. If the s3fs could not connect to the
region specified by this option, s3fs could not run. But if you do not specify
this option, and if you can not connect with the default region, s3fs will retry to
automatically connect to the other region. So s3fs can know the correct region
name, because s3fs can find it in an error from the S3 server.
-o sigv2 (default is signature version 4)
sets signing AWS requests by using Signature Version 2.
-o mp_umask (default is "0000")
sets umask for the mount point directory. If allow_other option is not set, s3fs
allows access to the mount point only to the owner. In the opposite case s3fs
allows access to all users as the default. But if you set the allow_other with
this option, you can control the permissions of the mount point by this option like
umask.
-o umask (default is "0000")
sets umask for files under the mountpoint. This can allow users other than the
mounting user to read and write to files that they did not create.
-o nomultipart - disable multipart uploads
-o enable_content_md5 (default is disable)
Allow S3 server to check data integrity of uploads via the Content-MD5 header.
This can add CPU overhead to transfers.
-o ecs (default is disable)
This option instructs s3fs to query the ECS container credential metadata address
instead of the instance metadata address.
-o iam_role (default is no IAM role)
This option requires the IAM role name or "auto". If you specify "auto", s3fs will
automatically use the IAM role names that are set to an instance. If you specify
this option without any argument, it is the same as that you have specified the
"auto".
-o ibm_iam_auth (default is not using IBM IAM authentication)
This option instructs s3fs to use IBM IAM authentication. In this mode, the
AWSAccessKey and AWSSecretKey will be used as IBM's Service-Instance-ID and APIKey,
respectively.
-o ibm_iam_endpoint (default is https://iam.bluemix.net)
Sets the URL to use for IBM IAM authentication.
-o use_xattr (default is not handling the extended attribute)
Enable to handle the extended attribute (xattrs). If you set this option, you can
use the extended attribute. For example, encfs and ecryptfs need to support the
extended attribute. Notice: if s3fs handles the extended attribute, s3fs can not
work to copy command with preserve=mode.
-o noxmlns - disable registering xml name space.
disable registering xml name space for response of ListBucketResult and
ListVersionsResult etc. Default name space is looked up from
"http://s3.amazonaws.com/doc/2006-03-01". This option should not be specified now,
because s3fs looks up xmlns automatically after v1.66.
-o nomixupload - disable copy in multipart uploads.
Disable to use PUT (copy api) when multipart uploading large size objects. By
default, when doing multipart upload, the range of unchanged data will use PUT
(copy api) whenever possible. When nocopyapi or norenameapi is specified, use of
PUT (copy api) is invalidated even if this option is not specified.
-o nocopyapi - for other incomplete compatibility object storage.
For a distributed object storage which is compatibility S3 API without PUT (copy
api). If you set this option, s3fs do not use PUT with "x-amz-copy-source" (copy
api). Because traffic is increased 2-3 times by this option, we do not recommend
this.
-o norenameapi - for other incomplete compatibility object storage.
For a distributed object storage which is compatibility S3 API without PUT (copy
api). This option is a subset of nocopyapi option. The nocopyapi option does not
use copy-api for all command (ex. chmod, chown, touch, mv, etc), but this option
does not use copy-api for only rename command (ex. mv). If this option is
specified with nocopyapi, then s3fs ignores it.
-o use_path_request_style (use legacy API calling style)
Enable compatibility with S3-like APIs which do not support the virtual-host
request style, by using the older path request style.
-o noua (suppress User-Agent header)
Usually s3fs outputs of the User-Agent in "s3fs/<version> (commit hash <hash>;
<using ssl library name>)" format. If this option is specified, s3fs suppresses
the output of the User-Agent.
-o cipher_suites
Customize the list of TLS cipher suites. Expects a colon separated list of cipher
suite names. A list of available cipher suites, depending on your TLS engine, can
be found on the CURL library documentation: https://curl.haxx.se/docs/ssl-
ciphers.html
-o instance_name
The instance name of the current s3fs mountpoint. This name will be added to
logging messages and user agent headers sent by s3fs.
-o complement_stat (complement lack of file/directory mode)
s3fs complements lack of information about file/directory mode if a file or a
directory object does not have x-amz-meta-mode header. As default, s3fs does not
complements stat information for a object, then the object will not be able to be
allowed to list/modify.
-o notsup_compat_dir (not support compatibility directory types)
As a default, s3fs supports objects of the directory type as much as possible and
recognizes them as directories. Objects that can be recognized as directory
objects are "dir/", "dir", "dir_$folder$", and there is a file object that does not
have a directory object but contains that directory path. s3fs needs redundant
communication to support all these directory types. The object as the directory
created by s3fs is "dir/". By restricting s3fs to recognize only "dir/" as a
directory, communication traffic can be reduced. This option is used to give this
restriction to s3fs. However, if there is a directory object other than "dir/" in
the bucket, specifying this option is not recommended. s3fs may not be able to
recognize the object correctly if an object created by s3fs exists in the bucket.
Please use this option when the directory in the bucket is only "dir/" object.
-o use_wtf8 - support arbitrary file system encoding.
S3 requires all object names to be valid utf-8. But some clients, notably Windows
NFS clients, use their own encoding. This option re-encodes invalid utf-8 object
names into valid utf-8 by mapping offending codes into a 'private' codepage of the
Unicode set. Useful on clients not using utf-8 as their file system encoding.
-o use_session_token - indicate that session token should be provided.
If credentials are provided by environment variables this switch forces presence
check of AWSSESSIONTOKEN variable. Otherwise an error is returned.
-o requester_pays (default is disable)
This option instructs s3fs to enable requests involving Requester Pays buckets (It
includes the 'x-amz-request-payer=requester' entry in the request header).
-o dbglevel (default="crit")
Set the debug message level. set value as crit (critical), err (error), warn
(warning), info (information) to debug level. default debug level is critical. If
s3fs run with "-d" option, the debug level is set information. When s3fs catch the
signal SIGUSR2, the debug level is bumpup.
-o curldbg - put curl debug message
Put the debug message from libcurl when this option is specified.
utility mode options
-u or --incomplete-mpu-list
Lists multipart incomplete objects uploaded to the specified bucket.
--incomplete-mpu-abort all or date format (default="24H")
Delete the multipart incomplete object uploaded to the specified bucket. If "all"
is specified for this option, all multipart incomplete objects will be deleted. If
you specify no argument as an option, objects older than 24 hours (24H) will be
deleted (This is the default value). You can specify an optional date format. It
can be specified as year, month, day, hour, minute, second, and it is expressed as
"Y", "M", "D", "h", "m", "s" respectively. For example, "1Y6M10D12h30m30s".
FUSE/MOUNT OPTIONS
Most of the generic mount options described in 'man mount' are supported (ro, rw, suid,
nosuid, dev, nodev, exec, noexec, atime, noatime, sync async, dirsync). Filesystems are
mounted with '-onodev,nosuid' by default, which can only be overridden by a privileged
user.
There are many FUSE specific mount options that can be specified. e.g. allow_other. See
the FUSE README for the full set.
NOTES
The maximum size of objects that s3fs can handle depends on Amazon S3. For example, up to
5 GB when using single PUT API. And up to 5 TB is supported when Multipart Upload API is
used.
If enabled via the "use_cache" option, s3fs automatically maintains a local cache of files
in the folder specified by use_cache. Whenever s3fs needs to read or write a file on S3,
it first downloads the entire file locally to the folder specified by use_cache and
operates on it. When fuse_release() is called, s3fs will re-upload the file to S3 if it
has been changed. s3fs uses md5 checksums to minimize downloads from S3.
The folder specified by use_cache is just a local cache. It can be deleted at any time.
s3fs rebuilds it on demand.
Local file caching works by calculating and comparing md5 checksums (ETag HTTP header).
s3fs leverages /etc/mime.types to "guess" the "correct" content-type based on file name
extension. This means that you can copy a website to S3 and serve it up directly from S3
with correct content-types!
SEE ALSO
fuse(8), mount(8), fusermount(1), fstab(5)
BUGS
Due to S3's "eventual consistency" limitations, file creation can and will occasionally
fail. Even after a successful create, subsequent reads can fail for an indeterminate time,
even after one or more successful reads. Create and read enough files and you will
eventually encounter this failure. This is not a flaw in s3fs and it is not something a
FUSE wrapper like s3fs can work around. The retries option does not address this issue.
Your application must either tolerate or compensate for these failures, for example by
retrying creates or reads.
AUTHOR
s3fs has been written by Randy Rizun <rrizun@gmail.com>.