Provided by: hylafax-client_6.0.6-8.1build1_amd64 bug

NAME

       sendpage - submit a pager job for transmission

SYNOPSIS

       sendpage [ options ] [ message...  ]

DESCRIPTION

       sendpage  submits a pager transmission request to a server using the Simple Network Paging
       Protocol (SNPP) described in  RFC  1861.   Pager  requests  specified  with  sendpage  are
       normally  processed  immediately,  although  they may also be queued for transmission at a
       later time using a syntax identical to the at(1) command.  For each job  that  is  queued,
       sendpage prints a job identifier on the standard output.  A job identifier is the token by
       which jobs are identified within HylaFAX.  Job identifiers can be supplied to the faxrm(1)
       command to remove the jobs or to the faxalter(1) command to alter job parameters.

       Pages  may  be sent to one or more destination paging terminals and, optionally, include a
       text message (depending on the capability of the receiving device).  Each  destination  is
       identified  by  a  Pager  Identification  Number  (PIN)  specified with the -p option; for
       example, sendpage -p 12345 ``Help, the fax machine is on fire!''.  A PIN  is  typically  a
       numeric  string though it may also be an alpha-numeric alias depending on the capabilities
       of the SNPP server.

       Text messages can be specified on the command line or taken from standard input.   The  -n
       option  must  be  used if no text message is to be supplied with the page request—as for a
       numeric-only pager.  Text supplied to the paging  system  is  sent  exactly  as  submitted
       including  any newline, carriage return, or non-ASCII data.  Message preparation including
       filtering and formatting must be done prior to submitting the data to sendpage.  Note that
       text supplied on the command line does not include a trailing newline character.

       The  order  of options on the command line is significant.  Each page to be transmitted is
       assigned the current value of parameters specified on the command line;  e.g.  whether  or
       not  to  queue  the  request.   This  means  that  options  that  specify parameters for a
       particular destination must precede the pager  ID  specified  with  the  -p  option.   For
       example,

              sendpage -l 2 -p sam Your network is hosed

       submits a page to ``sam'' that has service level 2 while

              sendpage -p sam -l 2 Your network is hosed

       submits  the  same  page but with the default service level (1).  Note also that parameter
       values persist across -p options so the following

              sendpage -l 0 -p sam -p 5551212 Your network is hosed

       submits two pages, both of which have service level 0.

OPTIONS

       -a time     Schedule transmission at the indicated time.  Times are  specified  using  the
                   syntax   of  the  at(1)  command;  e.g.  ``now  +  30  minutes''  to  schedule
                   transmission 30 minutes in the future.  By default, sendpage  schedules  pages
                   for  ``now''.   (In  SNPP parlance this option specifies the ``hold time'' for
                   the page; and may result in the page being delivered to  the  paging  terminal
                   but not delivered to the user until the specified time.)

       -D          Enable notification by electronic mail when the page has been delivered to the
                   service provider.  This option is meaningful only when  communicating  with  a
                   HylaFAX server.

       -f from     Use  from  as the identity of the message sender.  Otherwise the sender is the
                   user that invoked sendpage.  The sender  is  an  account  name  to  which  the
                   HylaFAX software should direct email notification messages.  The from identity
                   may be a fullblown ``From:'' line, e.g.  e.g. ``Joe Blow  <joe@foo.com>''  and
                   ``joe@foo.com  (Joe  Blow)''  are acceptable.  If no host-part is specified in
                   the from string the local hostname  is  used.   This  option  is  useful  when
                   sendpage  is  invoked on behalf of another user, such as in the implementation
                   of an electronic mail to pager gateway.

       -h [modem@]host[:port]
                   Force the jobs to be processed on a specific host  and,  optionally,  using  a
                   particular  modem.   The  host  may  be  either  a  symbolic name or a network
                   address.   If  no  -h  option  is  supplied,  sendpage  uses  the   SNPPSERVER
                   environment  variable to identify the SNPP server to which the pages should be
                   directed.  If no server is specified  then  sendpage  attempts  to  contact  a
                   server on the local host.  If no modem is specified, the job will be submitted
                   to any available modem.

       -I time     If a job must be requeued because of  a  communication  failure  schedule  the
                   retry  according to the specified time.  Times are given in seconds.  Minutes,
                   hours, and days can be specified with ``min'', ``hour'', and ``day'' suffixes,
                   respectively.   By  default  HylaFAX  reschedules  jobs using retry times that
                   depend on the manner in which the job failed; this interface permits a user to
                   override  this  algorithm  and  specify  a  single  fixed  retry  time for all
                   communication failures.  This option is  meaningful  only  when  communicating
                   with a HylaFAX server.

       -l level    Specify  a  particular  service  level to use in delivering a page.  A service
                   level defines both a scheduling priority and the time that a client is willing
                   to  wait  to  find  out  if delivery is successful or not.  Normal delivery is
                   obtained with level 1 (default).  The SNPP specification identifies level 0 as
                   the  highest  priority service level with levels 1-7 lower priority and levels
                   8-11 vendor/server-specific.  For HylaFAX server machines the mapping  between
                   service  level  and scheduling priority is defined by the configuration of the
                   SNPP server process; see the PriorityMap parameter in hfaxd(8)

       -n          Send to a numeric-only paging device; i.e. do not send a text message  in  the
                   paging request.

       -N          Do  not  notify the sender by electronic mail when the page has been delivered
                   to the service provider  (default).   This  option  is  meaningful  only  when
                   communicating with a HylaFAX server.

       -p PIN      The  Pager  Identification  Number (PIN) for a terminal that is to receive the
                   message.  A message  can  be  sent  to  multiple  destinations  by  specifying
                   multiple -p options.

       -q          Mark  pages to be queued on the server and do not wait for their delivery.  By
                   default sendpage conforms to the SNPP spec by synchronously waiting  for  each
                   page  to  be delivered.  This option instructs sendpage to submit one or pages
                   and then terminate immediately without waiting  for  their  completion.   When
                   pages  are  queued it is advisable to enable email notification with the -D or
                   -R  options.   Job  queueing  is  a  non-standard   function   of   the   SNPP
                   implementation  in  HylaFAX and is not available when submitting pages to non-
                   HylaFAX servers.

       -R          Enable notification by electronic mail when the message has been delivered and
                   when it is requeued for retransmission.  HylaFAX will always notify the sender
                   by electronic mail if there is problem delivering a page (irregardless of  the
                   email   notification   setting).    This   option   is  meaningful  only  when
                   communicating with a HylaFAX server.

       -s subject  Set the ``subject'' for the specified pages according to subject.  For HylaFAX
                   subject  is  used  as the identifier string returned in any email notification
                   messages (instead of the usual job identifier number).  This option is  useful
                   for  applications  that  cross  reference  notification  messages  against job
                   submissions.

       -t tries    Make no more than tries attempts to send the page.  By default,  HylaFAX  will
                   terminate  a job if: 3 consecutive attempts to send a particular message fail,
                   or it appears the receiver is  not  a  service  provider.   Otherwise  HylaFAX
                   places  no limit on the number of attempts to send a page, instead terminating
                   a job if it is not completed within a fixed period of time  specified  by  the
                   service  level.   Note  that  a  try  is  a  phone  call  in  which carrier is
                   established and the IXO/TAP or UCP protocol is commenced; this  is  contrasted
                   with  a  call  attempt that might have failed because the line was busy.  This
                   option is meaningful only when communicating with a HylaFAX server.

       -T dials    Make no more than dials phone calls  when  attempting  to  send  a  page.   By
                   default,  HylaFAX  will  terminate  a  job  if: 12 attempts to reach a service
                   provider fail,  or  it  appears  the  receiver  is  not  a  service  provider.
                   Otherwise  HylaFAX  terminates  a  job  if  it is not completed within a fixed
                   period of time specified by the service level.  This option is meaningful only
                   when communicating with a HylaFAX server.

       -v          Trace  the protocol between sendpage and the SNPP server process that does the
                   delivery work on the remote machine.  This  information  is  directed  to  the
                   standard output.

CONFIGURATION PARAMETERS

       sendpage   reads   configuration   information   from  the  files  /etc/hylafax/hyla.conf,
       /etc/hylafax/sendpage.conf, and ~/.hylarc; in that order.  Configuration files follow  the
       conventions  described  in  hylafax-client(1).  The following configuration parameters are
       recognized:
       Tag             Type       Default      Description
       HoldTime        string     -            hold time to assign to pages
       Host            string     localhost    host to contact for service
       MailAddr        string     -            mail address for notification messages
       MaxDials        integer    12           times to retry dialing
       MaxTries        integer    3            times to retry transmission
       Notify          string     none         control email notification
       Port            integer    444          port to use in contacting server
       Protocol        string     tcp          protocol to use in contacting server
       QueueSend       boolean    No           whether or not to queue pages
       RetryTime       string     -            delay between failed attempts to send
       ServiceLevel    integer                 SNPP service level for pages
       Verbose         boolean    No           whether or not to enable protocol tracing

       The configuration parameters are explained below:

       HoldTime       The hold time to assign to pages.  (Equivalent to the -a option.)

       Host           The host to contact for service.  (Equivalent to the -h option.)

       MailAddr       The electronic mail  address  to  direct  notification  messages  from  the
                      server.  If this string is specified without an ``@hostname'' part then the
                      local hostname will automatically  be  appended.   (Equivalent  to  the  -f
                      option.)

       MaxDials       The maximum number of times to dial the phone for each job.  (Equivalent to
                      the -T option.)

       MaxTries       The maximum number of times to retry sending a job.  (Equivalent to the  -t
                      option.)

       Notify         Control  the  email notification messages from the server.  This string may
                      be  one  of  ``done'',  ``none'',  ``requeued''  or  ``default''  with   an
                      optionally  preceding  ``when  ''  (e.g.  ``when done'').  Note that ``when
                      requeued'' implies ``when done''.   (Equivalent  to  the  -D,  -R,  and  -N
                      options.)

       Port           The network port to contact for service.  (Equivalent to the -h option.)

       Protocol       The  name  of  the  communication protocol to use when contacting a server.
                      (Equivalent to the SNPPSERVICE environment variable.)

       QueueSend      Control whether or not to wait for the pages to be delivered.   (Equivalent
                      to the -q option.)

       RetryTime      The  time  to  delay  between  job  retries due to a communication failure.
                      (Equivalent to the -I option.)

       ServiceLevel   The SNPP service level to assign to  each  page.   (Equivalent  to  the  -l
                      option.)

       Verbose        Control protocol tracing.  (Equivalent to the -v option.)

ENVIRONMENT

       The following environment variables are used by sendpage:

       SNPPSERVER     The  identity  of  the  SNPP  server to contact for service.  This value is
                      specified as ``[modem@]host[:port]'' where host is either a  host  name  or
                      the  Internet  ``.'' (dot) address of the host; port is the TCP port number
                      or service name to use (default is  ``snpp''  or  444);  and  modem  is  an
                      optional modem name or class on the server machine to use in processing the
                      requests (this is meaningful only when the server is running HylaFAX).

       SNPPSERVICE    The communication service specification for  communicating  with  the  SNPP
                      server.   This  value  is  specified  as  ``port[/protocol]'';  by  default
                      ``444/tcp''.

FILES

       /var/spool/hylafax/tmp/sndpageXXXXXX    temporary files

NOTES

       The phone number of the pager service provider is stored on the server machine and is  not
       specified  by  the  user;  this  is  a departure from pager support that was supplied with
       HylaFAX version 3.0.

       HylaFAX version 3.0 used to recognize a null  text  message  and  assume  the  destination
       paging  device  was  numeric-only.   This  is  no  longer  true; if a null text message is
       submitted then a null message will be included in the  paging  request.   This  may  cause
       paging  requests submitted to ``real SNPP'' servers to be rejected if the paging device is
       in fact numeric-only.  When sending to a numeric-only paging device the -n  option  should
       be used.

BUGS

       It  is  not  possible  to  page  text- and non-text devices together; sendpage must be run
       twice, once to send to text-capable devices and once to send to non-text devices.

SEE ALSO

       at(1), hylafax-client(1), faxalter(1), faxrm(1), faxstat(1), faxq(8),  hfaxd(8),  hylafax-
       server(5)

                                           May 12, 1996                               SENDPAGE(1)