Ubuntu Manpage: vnl-join - joins two log files on a particular field

NAME

       vnl-join - joins two log files on a particular field

SYNOPSIS

        $ cat a.vnl
        # a b
        AA 11
        bb 12
        CC 13
        dd 14
        dd 123

        $ cat b.vnl
        # a c
        aa 1
        cc 3
        bb 4
        ee 5
        - 23

        Try to join unsorted data on field 'a':
        $ vnl-join -j a a.vnl b.vnl
        # a b c
        join: /dev/fd/5:3: is not sorted: CC 13
        join: /dev/fd/6:3: is not sorted: bb 4

        Sort the data, and join on 'a':
        $ vnl-join --vnl-sort - -j a a.vnl b.vnl | vnl-align
        # a  b c
        bb  12 4

        Sort the data, and join on 'a', ignoring case:
        $ vnl-join -i --vnl-sort - -j a a.vnl b.vnl | vnl-align
        # a b c
        AA 11 1
        bb 12 4
        CC 13 3

        Sort the data, and join on 'a'. Also print the unmatched lines from both files:
        $ vnl-join -a1 -a2 --vnl-sort - -j a a.vnl b.vnl | vnl-align
        # a  b   c
        -   -   23
        AA   11 -
        CC   13 -
        aa  -    1
        bb   12  4
        cc  -    3
        dd  123 -
        dd   14 -
        ee  -    5

        Sort the data, and join on 'a'. Print the unmatched lines from both files,
        Output ONLY column 'c' from the 2nd input:
        $ vnl-join -a1 -a2 -o 2.c --vnl-sort - -j a a.vnl b.vnl | vnl-align
        # c
        23
        -
        -
         1
         4
         3
        -
        -
         5

DESCRIPTION

This tool joins two vnlog files on a given field. "vnl-join" is a wrapper around the GNU
coreutils "join" tool. Since this is a wrapper, most commandline options and behaviors of
the "join" tool are present; consult the join(1) manpage for detail. The differences from
GNU coreutils "join" are

• The input and output to this tool are vnlog files, complete with a legend

• The columns are referenced by name, not index. So instead of saying

join -j1

to join on the first column, you say

join -j time

to join on column "time".

• "-1" and "-2" are supported, but must refer to the same field. Since vnlog knows the
identify of each field, it makes no sense for "-1" and "-2" to be different. So pass
"-j" instead, it makes more sense in this context.

• "-a-" is available as a shorthand for "-a1 -a2": this is a full outer join, printing
unmatched records from both of the inputs. Similarly, "-v-" is available as a
shorthand for "-v1 -v2": this will output only the unique records in both of the
inputs.

• "vnl-join"-specific options are available to adjust the field-naming in the output:

--vnl-prefix1
--vnl-suffix1
--vnl-prefix2
--vnl-suffix2
--vnl-prefix
--vnl-suffix
--vnl-autoprefix
--vnl-autosuffix

See "Field names in the output" below for details.

• A "vnl-join"-specific option "--vnl-sort" is available to sort the input and/or
output. See below for details.

• If no "-o" is given, we output the join field, the remaining fields in logfile1, the
remaining fields in logfile2, .... This is what "-o auto" does, except we also handle
empty vnlogs correctly.

• "-e" is not supported because vnlog uses "-" to represent undefined fields.

• "--header" is not supported because vnlog assumes a specific header structure, and
"vnl-join" makes sure that this header is handled properly

• "-t" is not supported because vnlog assumes whitespace-separated fields

• "--zero-terminated" is not supported because vnlog assumes newline-separated records

• Rather than only 2-way joins, this tool supports N-way joins for any N > 2. See below
for details.

Past that, everything "join" does is supported, so see that man page for detailed
documentation. Note that all non-legend comments are stripped out, since it's not obvious
where they should end up.

Field names in the output
By default, the field names in the output match those in the input. This is what you want
most of the time. It is possible, however that a column name adjustment is needed. One
common use case for this is if the files being joined have identically-named columns,
which would produce duplicate columns in the output. Example: we fixed a bug in a
program, and want to compare the results before and after the fix. The program produces an
x-y trajectory as a function of time, so both the bugged and the bug-fixed programs
produce a vnlog with a legend

# time x y

Joining this on "time" will produce a vnlog with a legend

# time x y x y

which is confusing, and not what you want. Instead, we invoke "vnl-join" as

vnl-join --vnl-suffix1 _buggy --vnl-suffix2 _fixed -j time buggy.vnl fixed.vnl

And in the output we get a legend

# time x_buggy y_buggy x_fixed y_fixed

Much better.

Note that "vnl-join" provides several ways of specifying this. The above works only for
2-way joins. An alternate syntax is available for N-way joins, a comma-separated list. The
same could be expressed like this:

vnl-join -a- --vnl-suffix _buggy,_fixed -j time buggy.vnl fixed.vnl

Finally, if passing in structured filenames, "vnl-join" can infer the desired syntax from
the filenames. The same as above could be expressed even simpler:

vnl-join --vnl-autosuffix -j time buggy.vnl fixed.vnl

This works by looking at the set of passed in filenames, and stripping out the common
leading and trailing strings.

Sorting of input and output
The GNU coreutils "join" tool expects sorted columns because it can then take only a
single pass through the data. If the input isn't sorted, then we can use normal shell
substitutions to sort it:

$ vnl-join -j key <(vnl-sort -s -k key a.vnl) <(vnl-sort -s -k key b.vnl)

For convenience "vnl-join" provides a "--vnl-sort" option. This allows the above to be
equivalently expressed as

$ vnl-join -j key --vnl-sort - a.vnl b.vnl

The "-" after the "--vnl-sort" indicates that we want to sort the input only. If we also
want to sort the output, pass the short codes "sort" accepts instead of the "-". For
instance, to sort the input for "join" and to sort the output numerically, in reverse, do
this:

$ vnl-join -j key --vnl-sort rg a.vnl b.vnl

The reason this shorthand exists is to work around a quirk of "join". The sort order is
assumed by "join" to be lexicographical, without any way to change this. For "sort", this
is the default sort order, but "sort" has many options to change the sort order, options
which are sorely missing from "join". A real-world example affected by this is the joining
of numerical data. If you have "a.vnl":

# time a
8 a
9 b
10 c

and "b.vnl":

# time b
9 d
10 e

Then you cannot use "vnl-join" directly to join the data on time:

$ vnl-join -j time a.vnl b.vnl
# time a b
join: /dev/fd/4:3: is not sorted: 10 c
join: /dev/fd/5:2: is not sorted: 10 e
9 b d
10 c e

Instead you must re-sort both files lexicographically, and then (because you almost
certainly want to) sort it back into numerical order:

$ vnl-join -j time <(vnl-sort -s -k time a.vnl) <(vnl-sort -s -k time b.vnl) |
vnl-sort -s -n -k time
# time a b
9 b d
10 c e

Yuck. The shorthand described earlier makes the interface part of this palatable:

$ vnl-join -j time --vnl-sort n a.vnl b.vnl
# time a b
9 b d
10 c e

Note that the input sort is stable: "vnl-join" will invoke "vnl-sort -s". If you want a
stable post-sort, you need to ask for it with "--vnl-sort s...".

N-way joins
The GNU coreutils "join" tool is inherently designed to join exactly two files. "vnl-join"
extends this capability by chaining together a number of "join" invocations to produce a
generic N-way join. This works exactly how you would expect with the following caveats:

• Full outer joins are supported by passing "-a-", but no other "-a" option is
supported. This is possible, but wasn't obviously worth the trouble.

• "-v" is not supported. Again, this is possible, but wasn't obviously worth the
trouble.

• Similarly, "-o" is not supported. This is possible, but wasn't obviously worth the
trouble, especially since the desired behavior can be obtained by post-processing with
"vnl-filter".

BUGS

       This and the other "vnl-xxx" tools that wrap coreutils are written specifically to work
       with the Linux kernel and the GNU coreutils. None of these have been tested with BSD tools
       or with non-Linux kernels, and I'm sure things don't just work. It's probably not too
       effortful to get that running, but somebody needs to at least bug me for that. Or better
       yet, send me nice patches :)

REPOSITORY

       https://github.com/dkogan/vnlog/

AUTHOR

       Dima Kogan "<dima@secretsauce.net>"

LICENSE AND COPYRIGHT

       Copyright 2018 Dima Kogan "<dima@secretsauce.net>"

       This library is free software; you can redistribute it and/or modify it under the terms of
       the GNU Lesser General Public License as published by the Free Software Foundation; either
       version 2.1 of the License, or (at your option) any later version.

                                            2020-02-04                                VNL-JOIN(1)