Provided by: liblapack-doc_3.9.0-1build1_all

**NAME**

complex16GBcomputational

**SYNOPSIS**

Functionssubroutinezgbbrd(VECT, M, N, NCC, KL, KU, AB, LDAB, D, E, Q, LDQ, PT, LDPT, C, LDC, WORK, RWORK, INFO)ZGBBRDsubroutinezgbcon(NORM, N, KL, KU, AB, LDAB, IPIV, ANORM, RCOND, WORK, RWORK, INFO)ZGBCONsubroutinezgbequ(M, N, KL, KU, AB, LDAB, R, C, ROWCND, COLCND, AMAX, INFO)ZGBEQUsubroutinezgbequb(M, N, KL, KU, AB, LDAB, R, C, ROWCND, COLCND, AMAX, INFO)ZGBEQUBsubroutinezgbrfs(TRANS, N, KL, KU, NRHS, AB, LDAB, AFB, LDAFB, IPIV, B, LDB, X, LDX, FERR, BERR, WORK, RWORK, INFO)ZGBRFSsubroutinezgbrfsx(TRANS, EQUED, N, KL, KU, NRHS, AB, LDAB, AFB, LDAFB, IPIV, R, C, B, LDB, X, LDX, RCOND, BERR, N_ERR_BNDS, ERR_BNDS_NORM, ERR_BNDS_COMP, NPARAMS, PARAMS, WORK, RWORK, INFO)ZGBRFSXsubroutinezgbtf2(M, N, KL, KU, AB, LDAB, IPIV, INFO)ZGBTF2computes the LU factorization of a general band matrix using the unblocked version of the algorithm. subroutinezgbtrf(M, N, KL, KU, AB, LDAB, IPIV, INFO)ZGBTRFsubroutinezgbtrs(TRANS, N, KL, KU, NRHS, AB, LDAB, IPIV, B, LDB, INFO)ZGBTRSsubroutinezggbak(JOB, SIDE, N, ILO, IHI, LSCALE, RSCALE, M, V, LDV, INFO)ZGGBAKsubroutinezggbal(JOB, N, A, LDA, B, LDB, ILO, IHI, LSCALE, RSCALE, WORK, INFO)ZGGBALsubroutinezla_gbamv(TRANS, M, N, KL, KU, ALPHA, AB, LDAB, X, INCX, BETA, Y, INCY)ZLA_GBAMVperforms a matrix-vector operation to calculate error bounds. double precision functionzla_gbrcond_c(TRANS, N, KL, KU, AB, LDAB, AFB, LDAFB, IPIV, C, CAPPLY, INFO, WORK, RWORK)ZLA_GBRCOND_Ccomputes the infinity norm condition number of op(A)*inv(diag(c)) for general banded matrices. double precision functionzla_gbrcond_x(TRANS, N, KL, KU, AB, LDAB, AFB, LDAFB, IPIV, X, INFO, WORK, RWORK)ZLA_GBRCOND_Xcomputes the infinity norm condition number of op(A)*diag(x) for general banded matrices. subroutinezla_gbrfsx_extended(PREC_TYPE, TRANS_TYPE, N, KL, KU, NRHS, AB, LDAB, AFB, LDAFB, IPIV, COLEQU, C, B, LDB, Y, LDY, BERR_OUT, N_NORMS, ERR_BNDS_NORM, ERR_BNDS_COMP, RES, AYB, DY, Y_TAIL, RCOND, ITHRESH, RTHRESH, DZ_UB, IGNORE_CWISE, INFO)ZLA_GBRFSX_EXTENDEDimproves the computed solution to a system of linear equations for general banded matrices by performing extra-precise iterative refinement and provides error bounds and backward error estimates for the solution. double precision functionzla_gbrpvgrw(N, KL, KU, NCOLS, AB, LDAB, AFB, LDAFB)ZLA_GBRPVGRWcomputes the reciprocal pivot growth factor norm(A)/norm(U) for a general banded matrix. subroutinezungbr(VECT, M, N, K, A, LDA, TAU, WORK, LWORK, INFO)ZUNGBR

**Detailed** **Description**

This is the group of complex16 computational functions for GB matrices

**Function** **Documentation**

subroutinezgbbrd(characterVECT,integerM,integerN,integerNCC,integerKL,integerKU,complex*16,dimension(ldab,*)AB,integerLDAB,doubleprecision,dimension(*)D,doubleprecision,dimension(*)E,complex*16,dimension(ldq,*)Q,integerLDQ,complex*16,dimension(ldpt,*)PT,integerLDPT,complex*16,dimension(ldc,*)C,integerLDC,complex*16,dimension(*)WORK,doubleprecision,dimension(*)RWORK,integerINFO)ZGBBRDPurpose:ZGBBRD reduces a complex general m-by-n band matrix A to real upper bidiagonal form B by a unitary transformation: Q**H * A * P = B. The routine computes B, and optionally forms Q or P**H, or computes Q**H*C for a given matrix C.ParametersVECTVECT is CHARACTER*1 Specifies whether or not the matrices Q and P**H are to be formed. = 'N': do not form Q or P**H; = 'Q': form Q only; = 'P': form P**H only; = 'B': form both.MM is INTEGER The number of rows of the matrix A. M >= 0.NN is INTEGER The number of columns of the matrix A. N >= 0.NCCNCC is INTEGER The number of columns of the matrix C. NCC >= 0.KLKL is INTEGER The number of subdiagonals of the matrix A. KL >= 0.KUKU is INTEGER The number of superdiagonals of the matrix A. KU >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) On entry, the m-by-n band matrix A, stored in rows 1 to KL+KU+1. The j-th column of A is stored in the j-th column of the array AB as follows: AB(ku+1+i-j,j) = A(i,j) for max(1,j-ku)<=i<=min(m,j+kl). On exit, A is overwritten by values generated during the reduction.LDABLDAB is INTEGER The leading dimension of the array A. LDAB >= KL+KU+1.DD is DOUBLE PRECISION array, dimension (min(M,N)) The diagonal elements of the bidiagonal matrix B.EE is DOUBLE PRECISION array, dimension (min(M,N)-1) The superdiagonal elements of the bidiagonal matrix B.QQ is COMPLEX*16 array, dimension (LDQ,M) If VECT = 'Q' or 'B', the m-by-m unitary matrix Q. If VECT = 'N' or 'P', the array Q is not referenced.LDQLDQ is INTEGER The leading dimension of the array Q. LDQ >= max(1,M) if VECT = 'Q' or 'B'; LDQ >= 1 otherwise.PTPT is COMPLEX*16 array, dimension (LDPT,N) If VECT = 'P' or 'B', the n-by-n unitary matrix P'. If VECT = 'N' or 'Q', the array PT is not referenced.LDPTLDPT is INTEGER The leading dimension of the array PT. LDPT >= max(1,N) if VECT = 'P' or 'B'; LDPT >= 1 otherwise.CC is COMPLEX*16 array, dimension (LDC,NCC) On entry, an m-by-ncc matrix C. On exit, C is overwritten by Q**H*C. C is not referenced if NCC = 0.LDCLDC is INTEGER The leading dimension of the array C. LDC >= max(1,M) if NCC > 0; LDC >= 1 if NCC = 0.WORKWORK is COMPLEX*16 array, dimension (max(M,N))RWORKRWORK is DOUBLE PRECISION array, dimension (max(M,N))INFOINFO is INTEGER = 0: successful exit. < 0: if INFO = -i, the i-th argument had an illegal value.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016subroutinezgbcon(characterNORM,integerN,integerKL,integerKU,complex*16,dimension(ldab,*)AB,integerLDAB,integer,dimension(*)IPIV,doubleprecisionANORM,doubleprecisionRCOND,complex*16,dimension(*)WORK,doubleprecision,dimension(*)RWORK,integerINFO)ZGBCONPurpose:ZGBCON estimates the reciprocal of the condition number of a complex general band matrix A, in either the 1-norm or the infinity-norm, using the LU factorization computed by ZGBTRF. An estimate is obtained for norm(inv(A)), and the reciprocal of the condition number is computed as RCOND = 1 / ( norm(A) * norm(inv(A)) ).ParametersNORMNORM is CHARACTER*1 Specifies whether the 1-norm condition number or the infinity-norm condition number is required: = '1' or 'O': 1-norm; = 'I': Infinity-norm.NN is INTEGER The order of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) Details of the LU factorization of the band matrix A, as computed by ZGBTRF. U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1.LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= 2*KL+KU+1.IPIVIPIV is INTEGER array, dimension (N) The pivot indices; for 1 <= i <= N, row i of the matrix was interchanged with row IPIV(i).ANORMANORM is DOUBLE PRECISION If NORM = '1' or 'O', the 1-norm of the original matrix A. If NORM = 'I', the infinity-norm of the original matrix A.RCONDRCOND is DOUBLE PRECISION The reciprocal of the condition number of the matrix A, computed as RCOND = 1/(norm(A) * norm(inv(A))).WORKWORK is COMPLEX*16 array, dimension (2*N)RWORKRWORK is DOUBLE PRECISION array, dimension (N)INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal valueAuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016subroutinezgbequ(integerM,integerN,integerKL,integerKU,complex*16,dimension(ldab,*)AB,integerLDAB,doubleprecision,dimension(*)R,doubleprecision,dimension(*)C,doubleprecisionROWCND,doubleprecisionCOLCND,doubleprecisionAMAX,integerINFO)ZGBEQUPurpose:ZGBEQU computes row and column scalings intended to equilibrate an M-by-N band matrix A and reduce its condition number. R returns the row scale factors and C the column scale factors, chosen to try to make the largest element in each row and column of the matrix B with elements B(i,j)=R(i)*A(i,j)*C(j) have absolute value 1. R(i) and C(j) are restricted to be between SMLNUM = smallest safe number and BIGNUM = largest safe number. Use of these scaling factors is not guaranteed to reduce the condition number of A but works well in practice.ParametersMM is INTEGER The number of rows of the matrix A. M >= 0.NN is INTEGER The number of columns of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) The band matrix A, stored in rows 1 to KL+KU+1. The j-th column of A is stored in the j-th column of the array AB as follows: AB(ku+1+i-j,j) = A(i,j) for max(1,j-ku)<=i<=min(m,j+kl).LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= KL+KU+1.RR is DOUBLE PRECISION array, dimension (M) If INFO = 0, or INFO > M, R contains the row scale factors for A.CC is DOUBLE PRECISION array, dimension (N) If INFO = 0, C contains the column scale factors for A.ROWCNDROWCND is DOUBLE PRECISION If INFO = 0 or INFO > M, ROWCND contains the ratio of the smallest R(i) to the largest R(i). If ROWCND >= 0.1 and AMAX is neither too large nor too small, it is not worth scaling by R.COLCNDCOLCND is DOUBLE PRECISION If INFO = 0, COLCND contains the ratio of the smallest C(i) to the largest C(i). If COLCND >= 0.1, it is not worth scaling by C.AMAXAMAX is DOUBLE PRECISION Absolute value of largest matrix element. If AMAX is very close to overflow or very close to underflow, the matrix should be scaled.INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value > 0: if INFO = i, and i is <= M: the i-th row of A is exactly zero > M: the (i-M)-th column of A is exactly zeroAuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016subroutinezgbequb(integerM,integerN,integerKL,integerKU,complex*16,dimension(ldab,*)AB,integerLDAB,doubleprecision,dimension(*)R,doubleprecision,dimension(*)C,doubleprecisionROWCND,doubleprecisionCOLCND,doubleprecisionAMAX,integerINFO)ZGBEQUBPurpose:ZGBEQUB computes row and column scalings intended to equilibrate an M-by-N matrix A and reduce its condition number. R returns the row scale factors and C the column scale factors, chosen to try to make the largest element in each row and column of the matrix B with elements B(i,j)=R(i)*A(i,j)*C(j) have an absolute value of at most the radix. R(i) and C(j) are restricted to be a power of the radix between SMLNUM = smallest safe number and BIGNUM = largest safe number. Use of these scaling factors is not guaranteed to reduce the condition number of A but works well in practice. This routine differs from ZGEEQU by restricting the scaling factors to a power of the radix. Barring over- and underflow, scaling by these factors introduces no additional rounding errors. However, the scaled entries' magnitudes are no longer approximately 1 but lie between sqrt(radix) and 1/sqrt(radix).ParametersMM is INTEGER The number of rows of the matrix A. M >= 0.NN is INTEGER The number of columns of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) On entry, the matrix A in band storage, in rows 1 to KL+KU+1. The j-th column of A is stored in the j-th column of the array AB as follows: AB(KU+1+i-j,j) = A(i,j) for max(1,j-KU)<=i<=min(N,j+kl)LDABLDAB is INTEGER The leading dimension of the array A. LDAB >= max(1,M).RR is DOUBLE PRECISION array, dimension (M) If INFO = 0 or INFO > M, R contains the row scale factors for A.CC is DOUBLE PRECISION array, dimension (N) If INFO = 0, C contains the column scale factors for A.ROWCNDROWCND is DOUBLE PRECISION If INFO = 0 or INFO > M, ROWCND contains the ratio of the smallest R(i) to the largest R(i). If ROWCND >= 0.1 and AMAX is neither too large nor too small, it is not worth scaling by R.COLCNDCOLCND is DOUBLE PRECISION If INFO = 0, COLCND contains the ratio of the smallest C(i) to the largest C(i). If COLCND >= 0.1, it is not worth scaling by C.AMAXAMAX is DOUBLE PRECISION Absolute value of largest matrix element. If AMAX is very close to overflow or very close to underflow, the matrix should be scaled.INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value > 0: if INFO = i, and i is <= M: the i-th row of A is exactly zero > M: the (i-M)-th column of A is exactly zeroAuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateJune 2016subroutinezgbrfs(characterTRANS,integerN,integerKL,integerKU,integerNRHS,complex*16,dimension(ldab,*)AB,integerLDAB,complex*16,dimension(ldafb,*)AFB,integerLDAFB,integer,dimension(*)IPIV,complex*16,dimension(ldb,*)B,integerLDB,complex*16,dimension(ldx,*)X,integerLDX,doubleprecision,dimension(*)FERR,doubleprecision,dimension(*)BERR,complex*16,dimension(*)WORK,doubleprecision,dimension(*)RWORK,integerINFO)ZGBRFSPurpose:ZGBRFS improves the computed solution to a system of linear equations when the coefficient matrix is banded, and provides error bounds and backward error estimates for the solution.ParametersTRANSTRANS is CHARACTER*1 Specifies the form of the system of equations: = 'N': A * X = B (No transpose) = 'T': A**T * X = B (Transpose) = 'C': A**H * X = B (Conjugate transpose)NN is INTEGER The order of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.NRHSNRHS is INTEGER The number of right hand sides, i.e., the number of columns of the matrices B and X. NRHS >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) The original band matrix A, stored in rows 1 to KL+KU+1. The j-th column of A is stored in the j-th column of the array AB as follows: AB(ku+1+i-j,j) = A(i,j) for max(1,j-ku)<=i<=min(n,j+kl).LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= KL+KU+1.AFBAFB is COMPLEX*16 array, dimension (LDAFB,N) Details of the LU factorization of the band matrix A, as computed by ZGBTRF. U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1.LDAFBLDAFB is INTEGER The leading dimension of the array AFB. LDAFB >= 2*KL*KU+1.IPIVIPIV is INTEGER array, dimension (N) The pivot indices from ZGBTRF; for 1<=i<=N, row i of the matrix was interchanged with row IPIV(i).BB is COMPLEX*16 array, dimension (LDB,NRHS) The right hand side matrix B.LDBLDB is INTEGER The leading dimension of the array B. LDB >= max(1,N).XX is COMPLEX*16 array, dimension (LDX,NRHS) On entry, the solution matrix X, as computed by ZGBTRS. On exit, the improved solution matrix X.LDXLDX is INTEGER The leading dimension of the array X. LDX >= max(1,N).FERRFERR is DOUBLE PRECISION array, dimension (NRHS) The estimated forward error bound for each solution vector X(j) (the j-th column of the solution matrix X). If XTRUE is the true solution corresponding to X(j), FERR(j) is an estimated upper bound for the magnitude of the largest element in (X(j) - XTRUE) divided by the magnitude of the largest element in X(j). The estimate is as reliable as the estimate for RCOND, and is almost always a slight overestimate of the true error.BERRBERR is DOUBLE PRECISION array, dimension (NRHS) The componentwise relative backward error of each solution vector X(j) (i.e., the smallest relative change in any element of A or B that makes X(j) an exact solution).WORKWORK is COMPLEX*16 array, dimension (2*N)RWORKRWORK is DOUBLE PRECISION array, dimension (N)INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal valueInternalParameters:ITMAX is the maximum number of steps of iterative refinement.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016subroutinezgbrfsx(characterTRANS,characterEQUED,integerN,integerKL,integerKU,integerNRHS,complex*16,dimension(ldab,*)AB,integerLDAB,complex*16,dimension(ldafb,*)AFB,integerLDAFB,integer,dimension(*)IPIV,doubleprecision,dimension(*)R,doubleprecision,dimension(*)C,complex*16,dimension(ldb,*)B,integerLDB,complex*16,dimension(ldx,*)X,integerLDX,doubleprecisionRCOND,doubleprecision,dimension(*)BERR,integerN_ERR_BNDS,doubleprecision,dimension(nrhs,*)ERR_BNDS_NORM,doubleprecision,dimension(nrhs,*)ERR_BNDS_COMP,integerNPARAMS,doubleprecision,dimension(*)PARAMS,complex*16,dimension(*)WORK,doubleprecision,dimension(*)RWORK,integerINFO)ZGBRFSXPurpose:ZGBRFSX improves the computed solution to a system of linear equations and provides error bounds and backward error estimates for the solution. In addition to normwise error bound, the code provides maximum componentwise error bound if possible. See comments for ERR_BNDS_NORM and ERR_BNDS_COMP for details of the error bounds. The original system of linear equations may have been equilibrated before calling this routine, as described by arguments EQUED, R and C below. In this case, the solution and error bounds returned are for the original unequilibrated system. Some optional parameters are bundled in the PARAMS array. These settings determine how refinement is performed, but often the defaults are acceptable. If the defaults are acceptable, users can pass NPARAMS = 0 which prevents the source code from accessing the PARAMS argument.ParametersTRANSTRANS is CHARACTER*1 Specifies the form of the system of equations: = 'N': A * X = B (No transpose) = 'T': A**T * X = B (Transpose) = 'C': A**H * X = B (Conjugate transpose)EQUEDEQUED is CHARACTER*1 Specifies the form of equilibration that was done to A before calling this routine. This is needed to compute the solution and error bounds correctly. = 'N': No equilibration = 'R': Row equilibration, i.e., A has been premultiplied by diag(R). = 'C': Column equilibration, i.e., A has been postmultiplied by diag(C). = 'B': Both row and column equilibration, i.e., A has been replaced by diag(R) * A * diag(C). The right hand side B has been changed accordingly.NN is INTEGER The order of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.NRHSNRHS is INTEGER The number of right hand sides, i.e., the number of columns of the matrices B and X. NRHS >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) The original band matrix A, stored in rows 1 to KL+KU+1. The j-th column of A is stored in the j-th column of the array AB as follows: AB(ku+1+i-j,j) = A(i,j) for max(1,j-ku)<=i<=min(n,j+kl).LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= KL+KU+1.AFBAFB is COMPLEX*16 array, dimension (LDAFB,N) Details of the LU factorization of the band matrix A, as computed by DGBTRF. U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1.LDAFBLDAFB is INTEGER The leading dimension of the array AFB. LDAFB >= 2*KL*KU+1.IPIVIPIV is INTEGER array, dimension (N) The pivot indices from DGETRF; for 1<=i<=N, row i of the matrix was interchanged with row IPIV(i).RR is DOUBLE PRECISION array, dimension (N) The row scale factors for A. If EQUED = 'R' or 'B', A is multiplied on the left by diag(R); if EQUED = 'N' or 'C', R is not accessed. R is an input argument if FACT = 'F'; otherwise, R is an output argument. If FACT = 'F' and EQUED = 'R' or 'B', each element of R must be positive. If R is output, each element of R is a power of the radix. If R is input, each element of R should be a power of the radix to ensure a reliable solution and error estimates. Scaling by powers of the radix does not cause rounding errors unless the result underflows or overflows. Rounding errors during scaling lead to refining with a matrix that is not equivalent to the input matrix, producing error estimates that may not be reliable.CC is DOUBLE PRECISION array, dimension (N) The column scale factors for A. If EQUED = 'C' or 'B', A is multiplied on the right by diag(C); if EQUED = 'N' or 'R', C is not accessed. C is an input argument if FACT = 'F'; otherwise, C is an output argument. If FACT = 'F' and EQUED = 'C' or 'B', each element of C must be positive. If C is output, each element of C is a power of the radix. If C is input, each element of C should be a power of the radix to ensure a reliable solution and error estimates. Scaling by powers of the radix does not cause rounding errors unless the result underflows or overflows. Rounding errors during scaling lead to refining with a matrix that is not equivalent to the input matrix, producing error estimates that may not be reliable.BB is COMPLEX*16 array, dimension (LDB,NRHS) The right hand side matrix B.LDBLDB is INTEGER The leading dimension of the array B. LDB >= max(1,N).XX is COMPLEX*16 array, dimension (LDX,NRHS) On entry, the solution matrix X, as computed by DGETRS. On exit, the improved solution matrix X.LDXLDX is INTEGER The leading dimension of the array X. LDX >= max(1,N).RCONDRCOND is DOUBLE PRECISION Reciprocal scaled condition number. This is an estimate of the reciprocal Skeel condition number of the matrix A after equilibration (if done). If this is less than the machine precision (in particular, if it is zero), the matrix is singular to working precision. Note that the error may still be small even if this number is very small and the matrix appears ill- conditioned.BERRBERR is DOUBLE PRECISION array, dimension (NRHS) Componentwise relative backward error. This is the componentwise relative backward error of each solution vector X(j) (i.e., the smallest relative change in any element of A or B that makes X(j) an exact solution).N_ERR_BNDSN_ERR_BNDS is INTEGER Number of error bounds to return for each right hand side and each type (normwise or componentwise). See ERR_BNDS_NORM and ERR_BNDS_COMP below.ERR_BNDS_NORMERR_BNDS_NORM is DOUBLE PRECISION array, dimension (NRHS, N_ERR_BNDS) For each right-hand side, this array contains information about various error bounds and condition numbers corresponding to the normwise relative error, which is defined as follows: Normwise relative error in the ith solution vector: max_j (abs(XTRUE(j,i) - X(j,i))) ------------------------------ max_j abs(X(j,i)) The array is indexed by the type of error information as described below. There currently are up to three pieces of information returned. The first index in ERR_BNDS_NORM(i,:) corresponds to the ith right-hand side. The second index in ERR_BNDS_NORM(:,err) contains the following three fields: err = 1 "Trust/don't trust" boolean. Trust the answer if the reciprocal condition number is less than the threshold sqrt(n) * dlamch('Epsilon'). err = 2 "Guaranteed" error bound: The estimated forward error, almost certainly within a factor of 10 of the true error so long as the next entry is greater than the threshold sqrt(n) * dlamch('Epsilon'). This error bound should only be trusted if the previous boolean is true. err = 3 Reciprocal condition number: Estimated normwise reciprocal condition number. Compared with the threshold sqrt(n) * dlamch('Epsilon') to determine if the error estimate is "guaranteed". These reciprocal condition numbers are 1 / (norm(Z^{-1},inf) * norm(Z,inf)) for some appropriately scaled matrix Z. Let Z = S*A, where S scales each row by a power of the radix so all absolute row sums of Z are approximately 1. See Lapack Working Note 165 for further details and extra cautions.ERR_BNDS_COMPERR_BNDS_COMP is DOUBLE PRECISION array, dimension (NRHS, N_ERR_BNDS) For each right-hand side, this array contains information about various error bounds and condition numbers corresponding to the componentwise relative error, which is defined as follows: Componentwise relative error in the ith solution vector: abs(XTRUE(j,i) - X(j,i)) max_j ---------------------- abs(X(j,i)) The array is indexed by the right-hand side i (on which the componentwise relative error depends), and the type of error information as described below. There currently are up to three pieces of information returned for each right-hand side. If componentwise accuracy is not requested (PARAMS(3) = 0.0), then ERR_BNDS_COMP is not accessed. If N_ERR_BNDS < 3, then at most the first (:,N_ERR_BNDS) entries are returned. The first index in ERR_BNDS_COMP(i,:) corresponds to the ith right-hand side. The second index in ERR_BNDS_COMP(:,err) contains the following three fields: err = 1 "Trust/don't trust" boolean. Trust the answer if the reciprocal condition number is less than the threshold sqrt(n) * dlamch('Epsilon'). err = 2 "Guaranteed" error bound: The estimated forward error, almost certainly within a factor of 10 of the true error so long as the next entry is greater than the threshold sqrt(n) * dlamch('Epsilon'). This error bound should only be trusted if the previous boolean is true. err = 3 Reciprocal condition number: Estimated componentwise reciprocal condition number. Compared with the threshold sqrt(n) * dlamch('Epsilon') to determine if the error estimate is "guaranteed". These reciprocal condition numbers are 1 / (norm(Z^{-1},inf) * norm(Z,inf)) for some appropriately scaled matrix Z. Let Z = S*(A*diag(x)), where x is the solution for the current right-hand side and S scales each row of A*diag(x) by a power of the radix so all absolute row sums of Z are approximately 1. See Lapack Working Note 165 for further details and extra cautions.NPARAMSNPARAMS is INTEGER Specifies the number of parameters set in PARAMS. If <= 0, the PARAMS array is never referenced and default values are used.PARAMSPARAMS is DOUBLE PRECISION array, dimension NPARAMS Specifies algorithm parameters. If an entry is < 0.0, then that entry will be filled with default value used for that parameter. Only positions up to NPARAMS are accessed; defaults are used for higher-numbered parameters. PARAMS(LA_LINRX_ITREF_I = 1) : Whether to perform iterative refinement or not. Default: 1.0D+0 = 0.0: No refinement is performed, and no error bounds are computed. = 1.0: Use the double-precision refinement algorithm, possibly with doubled-single computations if the compilation environment does not support DOUBLE PRECISION. (other values are reserved for future use) PARAMS(LA_LINRX_ITHRESH_I = 2) : Maximum number of residual computations allowed for refinement. Default: 10 Aggressive: Set to 100 to permit convergence using approximate factorizations or factorizations other than LU. If the factorization uses a technique other than Gaussian elimination, the guarantees in err_bnds_norm and err_bnds_comp may no longer be trustworthy. PARAMS(LA_LINRX_CWISE_I = 3) : Flag determining if the code will attempt to find a solution with small componentwise relative error in the double-precision algorithm. Positive is true, 0.0 is false. Default: 1.0 (attempt componentwise convergence)WORKWORK is COMPLEX*16 array, dimension (2*N)RWORKRWORK is DOUBLE PRECISION array, dimension (2*N)INFOINFO is INTEGER = 0: Successful exit. The solution to every right-hand side is guaranteed. < 0: If INFO = -i, the i-th argument had an illegal value > 0 and <= N: U(INFO,INFO) is exactly zero. The factorization has been completed, but the factor U is exactly singular, so the solution and error bounds could not be computed. RCOND = 0 is returned. = N+J: The solution corresponding to the Jth right-hand side is not guaranteed. The solutions corresponding to other right- hand sides K with K > J may not be guaranteed as well, but only the first such right-hand side is reported. If a small componentwise error is not requested (PARAMS(3) = 0.0) then the Jth right-hand side is the first with a normwise error bound that is not guaranteed (the smallest J such that ERR_BNDS_NORM(J,1) = 0.0). By default (PARAMS(3) = 1.0) the Jth right-hand side is the first with either a normwise or componentwise error bound that is not guaranteed (the smallest J such that either ERR_BNDS_NORM(J,1) = 0.0 or ERR_BNDS_COMP(J,1) = 0.0). See the definition of ERR_BNDS_NORM(:,1) and ERR_BNDS_COMP(:,1). To get information about all of the right-hand sides check ERR_BNDS_NORM or ERR_BNDS_COMP.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateApril 2012subroutinezgbtf2(integerM,integerN,integerKL,integerKU,complex*16,dimension(ldab,*)AB,integerLDAB,integer,dimension(*)IPIV,integerINFO)ZGBTF2computes the LU factorization of a general band matrix using the unblocked version of the algorithm.Purpose:ZGBTF2 computes an LU factorization of a complex m-by-n band matrix A using partial pivoting with row interchanges. This is the unblocked version of the algorithm, calling Level 2 BLAS.ParametersMM is INTEGER The number of rows of the matrix A. M >= 0.NN is INTEGER The number of columns of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) On entry, the matrix A in band storage, in rows KL+1 to 2*KL+KU+1; rows 1 to KL of the array need not be set. The j-th column of A is stored in the j-th column of the array AB as follows: AB(kl+ku+1+i-j,j) = A(i,j) for max(1,j-ku)<=i<=min(m,j+kl) On exit, details of the factorization: U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1. See below for further details.LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= 2*KL+KU+1.IPIVIPIV is INTEGER array, dimension (min(M,N)) The pivot indices; for 1 <= i <= min(M,N), row i of the matrix was interchanged with row IPIV(i).INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value > 0: if INFO = +i, U(i,i) is exactly zero. The factorization has been completed, but the factor U is exactly singular, and division by zero will occur if it is used to solve a system of equations.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016FurtherDetails:The band storage scheme is illustrated by the following example, when M = N = 6, KL = 2, KU = 1: On entry: On exit: * * * + + + * * * u14 u25 u36 * * + + + + * * u13 u24 u35 u46 * a12 a23 a34 a45 a56 * u12 u23 u34 u45 u56 a11 a22 a33 a44 a55 a66 u11 u22 u33 u44 u55 u66 a21 a32 a43 a54 a65 * m21 m32 m43 m54 m65 * a31 a42 a53 a64 * * m31 m42 m53 m64 * * Array elements marked * are not used by the routine; elements marked + need not be set on entry, but are required by the routine to store elements of U, because of fill-in resulting from the row interchanges.subroutinezgbtrf(integerM,integerN,integerKL,integerKU,complex*16,dimension(ldab,*)AB,integerLDAB,integer,dimension(*)IPIV,integerINFO)ZGBTRFPurpose:ZGBTRF computes an LU factorization of a complex m-by-n band matrix A using partial pivoting with row interchanges. This is the blocked version of the algorithm, calling Level 3 BLAS.ParametersMM is INTEGER The number of rows of the matrix A. M >= 0.NN is INTEGER The number of columns of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) On entry, the matrix A in band storage, in rows KL+1 to 2*KL+KU+1; rows 1 to KL of the array need not be set. The j-th column of A is stored in the j-th column of the array AB as follows: AB(kl+ku+1+i-j,j) = A(i,j) for max(1,j-ku)<=i<=min(m,j+kl) On exit, details of the factorization: U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1. See below for further details.LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= 2*KL+KU+1.IPIVIPIV is INTEGER array, dimension (min(M,N)) The pivot indices; for 1 <= i <= min(M,N), row i of the matrix was interchanged with row IPIV(i).INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value > 0: if INFO = +i, U(i,i) is exactly zero. The factorization has been completed, but the factor U is exactly singular, and division by zero will occur if it is used to solve a system of equations.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016FurtherDetails:The band storage scheme is illustrated by the following example, when M = N = 6, KL = 2, KU = 1: On entry: On exit: * * * + + + * * * u14 u25 u36 * * + + + + * * u13 u24 u35 u46 * a12 a23 a34 a45 a56 * u12 u23 u34 u45 u56 a11 a22 a33 a44 a55 a66 u11 u22 u33 u44 u55 u66 a21 a32 a43 a54 a65 * m21 m32 m43 m54 m65 * a31 a42 a53 a64 * * m31 m42 m53 m64 * * Array elements marked * are not used by the routine; elements marked + need not be set on entry, but are required by the routine to store elements of U because of fill-in resulting from the row interchanges.subroutinezgbtrs(characterTRANS,integerN,integerKL,integerKU,integerNRHS,complex*16,dimension(ldab,*)AB,integerLDAB,integer,dimension(*)IPIV,complex*16,dimension(ldb,*)B,integerLDB,integerINFO)ZGBTRSPurpose:ZGBTRS solves a system of linear equations A * X = B, A**T * X = B, or A**H * X = B with a general band matrix A using the LU factorization computed by ZGBTRF.ParametersTRANSTRANS is CHARACTER*1 Specifies the form of the system of equations. = 'N': A * X = B (No transpose) = 'T': A**T * X = B (Transpose) = 'C': A**H * X = B (Conjugate transpose)NN is INTEGER The order of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.NRHSNRHS is INTEGER The number of right hand sides, i.e., the number of columns of the matrix B. NRHS >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) Details of the LU factorization of the band matrix A, as computed by ZGBTRF. U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1.LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= 2*KL+KU+1.IPIVIPIV is INTEGER array, dimension (N) The pivot indices; for 1 <= i <= N, row i of the matrix was interchanged with row IPIV(i).BB is COMPLEX*16 array, dimension (LDB,NRHS) On entry, the right hand side matrix B. On exit, the solution matrix X.LDBLDB is INTEGER The leading dimension of the array B. LDB >= max(1,N).INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal valueAuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016subroutinezggbak(characterJOB,characterSIDE,integerN,integerILO,integerIHI,doubleprecision,dimension(*)LSCALE,doubleprecision,dimension(*)RSCALE,integerM,complex*16,dimension(ldv,*)V,integerLDV,integerINFO)ZGGBAKPurpose:ZGGBAK forms the right or left eigenvectors of a complex generalized eigenvalue problem A*x = lambda*B*x, by backward transformation on the computed eigenvectors of the balanced pair of matrices output by ZGGBAL.ParametersJOBJOB is CHARACTER*1 Specifies the type of backward transformation required: = 'N': do nothing, return immediately; = 'P': do backward transformation for permutation only; = 'S': do backward transformation for scaling only; = 'B': do backward transformations for both permutation and scaling. JOB must be the same as the argument JOB supplied to ZGGBAL.SIDESIDE is CHARACTER*1 = 'R': V contains right eigenvectors; = 'L': V contains left eigenvectors.NN is INTEGER The number of rows of the matrix V. N >= 0.ILOILO is INTEGERIHIIHI is INTEGER The integers ILO and IHI determined by ZGGBAL. 1 <= ILO <= IHI <= N, if N > 0; ILO=1 and IHI=0, if N=0.LSCALELSCALE is DOUBLE PRECISION array, dimension (N) Details of the permutations and/or scaling factors applied to the left side of A and B, as returned by ZGGBAL.RSCALERSCALE is DOUBLE PRECISION array, dimension (N) Details of the permutations and/or scaling factors applied to the right side of A and B, as returned by ZGGBAL.MM is INTEGER The number of columns of the matrix V. M >= 0.VV is COMPLEX*16 array, dimension (LDV,M) On entry, the matrix of right or left eigenvectors to be transformed, as returned by ZTGEVC. On exit, V is overwritten by the transformed eigenvectors.LDVLDV is INTEGER The leading dimension of the matrix V. LDV >= max(1,N).INFOINFO is INTEGER = 0: successful exit. < 0: if INFO = -i, the i-th argument had an illegal value.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016FurtherDetails:See R.C. Ward, Balancing the generalized eigenvalue problem, SIAM J. Sci. Stat. Comp. 2 (1981), 141-152.subroutinezggbal(characterJOB,integerN,complex*16,dimension(lda,*)A,integerLDA,complex*16,dimension(ldb,*)B,integerLDB,integerILO,integerIHI,doubleprecision,dimension(*)LSCALE,doubleprecision,dimension(*)RSCALE,doubleprecision,dimension(*)WORK,integerINFO)ZGGBALPurpose:ZGGBAL balances a pair of general complex matrices (A,B). This involves, first, permuting A and B by similarity transformations to isolate eigenvalues in the first 1 to ILO$-$1 and last IHI+1 to N elements on the diagonal; and second, applying a diagonal similarity transformation to rows and columns ILO to IHI to make the rows and columns as close in norm as possible. Both steps are optional. Balancing may reduce the 1-norm of the matrices, and improve the accuracy of the computed eigenvalues and/or eigenvectors in the generalized eigenvalue problem A*x = lambda*B*x.ParametersJOBJOB is CHARACTER*1 Specifies the operations to be performed on A and B: = 'N': none: simply set ILO = 1, IHI = N, LSCALE(I) = 1.0 and RSCALE(I) = 1.0 for i=1,...,N; = 'P': permute only; = 'S': scale only; = 'B': both permute and scale.NN is INTEGER The order of the matrices A and B. N >= 0.AA is COMPLEX*16 array, dimension (LDA,N) On entry, the input matrix A. On exit, A is overwritten by the balanced matrix. If JOB = 'N', A is not referenced.LDALDA is INTEGER The leading dimension of the array A. LDA >= max(1,N).BB is COMPLEX*16 array, dimension (LDB,N) On entry, the input matrix B. On exit, B is overwritten by the balanced matrix. If JOB = 'N', B is not referenced.LDBLDB is INTEGER The leading dimension of the array B. LDB >= max(1,N).ILOILO is INTEGERIHIIHI is INTEGER ILO and IHI are set to integers such that on exit A(i,j) = 0 and B(i,j) = 0 if i > j and j = 1,...,ILO-1 or i = IHI+1,...,N. If JOB = 'N' or 'S', ILO = 1 and IHI = N.LSCALELSCALE is DOUBLE PRECISION array, dimension (N) Details of the permutations and scaling factors applied to the left side of A and B. If P(j) is the index of the row interchanged with row j, and D(j) is the scaling factor applied to row j, then LSCALE(j) = P(j) for J = 1,...,ILO-1 = D(j) for J = ILO,...,IHI = P(j) for J = IHI+1,...,N. The order in which the interchanges are made is N to IHI+1, then 1 to ILO-1.RSCALERSCALE is DOUBLE PRECISION array, dimension (N) Details of the permutations and scaling factors applied to the right side of A and B. If P(j) is the index of the column interchanged with column j, and D(j) is the scaling factor applied to column j, then RSCALE(j) = P(j) for J = 1,...,ILO-1 = D(j) for J = ILO,...,IHI = P(j) for J = IHI+1,...,N. The order in which the interchanges are made is N to IHI+1, then 1 to ILO-1.WORKWORK is DOUBLE PRECISION array, dimension (lwork) lwork must be at least max(1,6*N) when JOB = 'S' or 'B', and at least 1 when JOB = 'N' or 'P'.INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal value.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateJune 2016FurtherDetails:See R.C. WARD, Balancing the generalized eigenvalue problem, SIAM J. Sci. Stat. Comp. 2 (1981), 141-152.subroutinezla_gbamv(integerTRANS,integerM,integerN,integerKL,integerKU,doubleprecisionALPHA,complex*16,dimension(ldab,*)AB,integerLDAB,complex*16,dimension(*)X,integerINCX,doubleprecisionBETA,doubleprecision,dimension(*)Y,integerINCY)ZLA_GBAMVperforms a matrix-vector operation to calculate error bounds.Purpose:ZLA_GBAMV performs one of the matrix-vector operations y := alpha*abs(A)*abs(x) + beta*abs(y), or y := alpha*abs(A)**T*abs(x) + beta*abs(y), where alpha and beta are scalars, x and y are vectors and A is an m by n matrix. This function is primarily used in calculating error bounds. To protect against underflow during evaluation, components in the resulting vector are perturbed away from zero by (N+1) times the underflow threshold. To prevent unnecessarily large errors for block-structure embedded in general matrices, "symbolically" zero components are not perturbed. A zero entry is considered "symbolic" if all multiplications involved in computing that entry have at least one zero multiplicand.ParametersTRANSTRANS is INTEGER On entry, TRANS specifies the operation to be performed as follows: BLAS_NO_TRANS y := alpha*abs(A)*abs(x) + beta*abs(y) BLAS_TRANS y := alpha*abs(A**T)*abs(x) + beta*abs(y) BLAS_CONJ_TRANS y := alpha*abs(A**T)*abs(x) + beta*abs(y) Unchanged on exit.MM is INTEGER On entry, M specifies the number of rows of the matrix A. M must be at least zero. Unchanged on exit.NN is INTEGER On entry, N specifies the number of columns of the matrix A. N must be at least zero. Unchanged on exit.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.ALPHAALPHA is DOUBLE PRECISION On entry, ALPHA specifies the scalar alpha. Unchanged on exit.ABAB is COMPLEX*16 array, dimension ( LDAB, n ) Before entry, the leading m by n part of the array AB must contain the matrix of coefficients. Unchanged on exit.LDABLDAB is INTEGER On entry, LDAB specifies the first dimension of AB as declared in the calling (sub) program. LDAB must be at least max( 1, m ). Unchanged on exit.XX is COMPLEX*16 array, dimension ( 1 + ( n - 1 )*abs( INCX ) ) when TRANS = 'N' or 'n' and at least ( 1 + ( m - 1 )*abs( INCX ) ) otherwise. Before entry, the incremented array X must contain the vector x. Unchanged on exit.INCXINCX is INTEGER On entry, INCX specifies the increment for the elements of X. INCX must not be zero. Unchanged on exit.BETABETA is DOUBLE PRECISION On entry, BETA specifies the scalar beta. When BETA is supplied as zero then Y need not be set on input. Unchanged on exit.YY is DOUBLE PRECISION array, dimension ( 1 + ( m - 1 )*abs( INCY ) ) when TRANS = 'N' or 'n' and at least ( 1 + ( n - 1 )*abs( INCY ) ) otherwise. Before entry with BETA non-zero, the incremented array Y must contain the vector y. On exit, Y is overwritten by the updated vector y.INCYINCY is INTEGER On entry, INCY specifies the increment for the elements of Y. INCY must not be zero. Unchanged on exit. Level 2 Blas routine.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateJune 2017doubleprecisionfunctionzla_gbrcond_c(characterTRANS,integerN,integerKL,integerKU,complex*16,dimension(ldab,*)AB,integerLDAB,complex*16,dimension(ldafb,*)AFB,integerLDAFB,integer,dimension(*)IPIV,doubleprecision,dimension(*)C,logicalCAPPLY,integerINFO,complex*16,dimension(*)WORK,doubleprecision,dimension(*)RWORK)ZLA_GBRCOND_Ccomputes the infinity norm condition number of op(A)*inv(diag(c)) for general banded matrices.Purpose:ZLA_GBRCOND_C Computes the infinity norm condition number of op(A) * inv(diag(C)) where C is a DOUBLE PRECISION vector.ParametersTRANSTRANS is CHARACTER*1 Specifies the form of the system of equations: = 'N': A * X = B (No transpose) = 'T': A**T * X = B (Transpose) = 'C': A**H * X = B (Conjugate Transpose = Transpose)NN is INTEGER The number of linear equations, i.e., the order of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) On entry, the matrix A in band storage, in rows 1 to KL+KU+1. The j-th column of A is stored in the j-th column of the array AB as follows: AB(KU+1+i-j,j) = A(i,j) for max(1,j-KU)<=i<=min(N,j+kl)LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= KL+KU+1.AFBAFB is COMPLEX*16 array, dimension (LDAFB,N) Details of the LU factorization of the band matrix A, as computed by ZGBTRF. U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1.LDAFBLDAFB is INTEGER The leading dimension of the array AFB. LDAFB >= 2*KL+KU+1.IPIVIPIV is INTEGER array, dimension (N) The pivot indices from the factorization A = P*L*U as computed by ZGBTRF; row i of the matrix was interchanged with row IPIV(i).CC is DOUBLE PRECISION array, dimension (N) The vector C in the formula op(A) * inv(diag(C)).CAPPLYCAPPLY is LOGICAL If .TRUE. then access the vector C in the formula above.INFOINFO is INTEGER = 0: Successful exit. i > 0: The ith argument is invalid.WORKWORK is COMPLEX*16 array, dimension (2*N). Workspace.RWORKRWORK is DOUBLE PRECISION array, dimension (N). Workspace.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016doubleprecisionfunctionzla_gbrcond_x(characterTRANS,integerN,integerKL,integerKU,complex*16,dimension(ldab,*)AB,integerLDAB,complex*16,dimension(ldafb,*)AFB,integerLDAFB,integer,dimension(*)IPIV,complex*16,dimension(*)X,integerINFO,complex*16,dimension(*)WORK,doubleprecision,dimension(*)RWORK)ZLA_GBRCOND_Xcomputes the infinity norm condition number of op(A)*diag(x) for general banded matrices.Purpose:ZLA_GBRCOND_X Computes the infinity norm condition number of op(A) * diag(X) where X is a COMPLEX*16 vector.ParametersTRANSTRANS is CHARACTER*1 Specifies the form of the system of equations: = 'N': A * X = B (No transpose) = 'T': A**T * X = B (Transpose) = 'C': A**H * X = B (Conjugate Transpose = Transpose)NN is INTEGER The number of linear equations, i.e., the order of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) On entry, the matrix A in band storage, in rows 1 to KL+KU+1. The j-th column of A is stored in the j-th column of the array AB as follows: AB(KU+1+i-j,j) = A(i,j) for max(1,j-KU)<=i<=min(N,j+kl)LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= KL+KU+1.AFBAFB is COMPLEX*16 array, dimension (LDAFB,N) Details of the LU factorization of the band matrix A, as computed by ZGBTRF. U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1.LDAFBLDAFB is INTEGER The leading dimension of the array AFB. LDAFB >= 2*KL+KU+1.IPIVIPIV is INTEGER array, dimension (N) The pivot indices from the factorization A = P*L*U as computed by ZGBTRF; row i of the matrix was interchanged with row IPIV(i).XX is COMPLEX*16 array, dimension (N) The vector X in the formula op(A) * diag(X).INFOINFO is INTEGER = 0: Successful exit. i > 0: The ith argument is invalid.WORKWORK is COMPLEX*16 array, dimension (2*N). Workspace.RWORKRWORK is DOUBLE PRECISION array, dimension (N). Workspace.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016subroutinezla_gbrfsx_extended(integerPREC_TYPE,integerTRANS_TYPE,integerN,integerKL,integerKU,integerNRHS,complex*16,dimension(ldab,*)AB,integerLDAB,complex*16,dimension(ldafb,*)AFB,integerLDAFB,integer,dimension(*)IPIV,logicalCOLEQU,doubleprecision,dimension(*)C,complex*16,dimension(ldb,*)B,integerLDB,complex*16,dimension(ldy,*)Y,integerLDY,doubleprecision,dimension(*)BERR_OUT,integerN_NORMS,doubleprecision,dimension(nrhs,*)ERR_BNDS_NORM,doubleprecision,dimension(nrhs,*)ERR_BNDS_COMP,complex*16,dimension(*)RES,doubleprecision,dimension(*)AYB,complex*16,dimension(*)DY,complex*16,dimension(*)Y_TAIL,doubleprecisionRCOND,integerITHRESH,doubleprecisionRTHRESH,doubleprecisionDZ_UB,logicalIGNORE_CWISE,integerINFO)ZLA_GBRFSX_EXTENDEDimproves the computed solution to a system of linear equations for general banded matrices by performing extra-precise iterative refinement and provides error bounds and backward error estimates for the solution.Purpose:ZLA_GBRFSX_EXTENDED improves the computed solution to a system of linear equations by performing extra-precise iterative refinement and provides error bounds and backward error estimates for the solution. This subroutine is called by ZGBRFSX to perform iterative refinement. In addition to normwise error bound, the code provides maximum componentwise error bound if possible. See comments for ERR_BNDS_NORM and ERR_BNDS_COMP for details of the error bounds. Note that this subroutine is only resonsible for setting the second fields of ERR_BNDS_NORM and ERR_BNDS_COMP.ParametersPREC_TYPEPREC_TYPE is INTEGER Specifies the intermediate precision to be used in refinement. The value is defined by ILAPREC(P) where P is a CHARACTER and P = 'S': Single = 'D': Double = 'I': Indigenous = 'X' or 'E': ExtraTRANS_TYPETRANS_TYPE is INTEGER Specifies the transposition operation on A. The value is defined by ILATRANS(T) where T is a CHARACTER and T = 'N': No transpose = 'T': Transpose = 'C': Conjugate transposeNN is INTEGER The number of linear equations, i.e., the order of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0NRHSNRHS is INTEGER The number of right-hand-sides, i.e., the number of columns of the matrix B.ABAB is COMPLEX*16 array, dimension (LDAB,N) On entry, the N-by-N matrix A.LDABLDAB is INTEGER The leading dimension of the array A. LDAB >= max(1,N).AFBAFB is COMPLEX*16 array, dimension (LDAF,N) The factors L and U from the factorization A = P*L*U as computed by ZGBTRF.LDAFBLDAFB is INTEGER The leading dimension of the array AF. LDAF >= max(1,N).IPIVIPIV is INTEGER array, dimension (N) The pivot indices from the factorization A = P*L*U as computed by ZGBTRF; row i of the matrix was interchanged with row IPIV(i).COLEQUCOLEQU is LOGICAL If .TRUE. then column equilibration was done to A before calling this routine. This is needed to compute the solution and error bounds correctly.CC is DOUBLE PRECISION array, dimension (N) The column scale factors for A. If COLEQU = .FALSE., C is not accessed. If C is input, each element of C should be a power of the radix to ensure a reliable solution and error estimates. Scaling by powers of the radix does not cause rounding errors unless the result underflows or overflows. Rounding errors during scaling lead to refining with a matrix that is not equivalent to the input matrix, producing error estimates that may not be reliable.BB is COMPLEX*16 array, dimension (LDB,NRHS) The right-hand-side matrix B.LDBLDB is INTEGER The leading dimension of the array B. LDB >= max(1,N).YY is COMPLEX*16 array, dimension (LDY,NRHS) On entry, the solution matrix X, as computed by ZGBTRS. On exit, the improved solution matrix Y.LDYLDY is INTEGER The leading dimension of the array Y. LDY >= max(1,N).BERR_OUTBERR_OUT is DOUBLE PRECISION array, dimension (NRHS) On exit, BERR_OUT(j) contains the componentwise relative backward error for right-hand-side j from the formula max(i) ( abs(RES(i)) / ( abs(op(A_s))*abs(Y) + abs(B_s) )(i) ) where abs(Z) is the componentwise absolute value of the matrix or vector Z. This is computed by ZLA_LIN_BERR.N_NORMSN_NORMS is INTEGER Determines which error bounds to return (see ERR_BNDS_NORM and ERR_BNDS_COMP). If N_NORMS >= 1 return normwise error bounds. If N_NORMS >= 2 return componentwise error bounds.ERR_BNDS_NORMERR_BNDS_NORM is DOUBLE PRECISION array, dimension (NRHS, N_ERR_BNDS) For each right-hand side, this array contains information about various error bounds and condition numbers corresponding to the normwise relative error, which is defined as follows: Normwise relative error in the ith solution vector: max_j (abs(XTRUE(j,i) - X(j,i))) ------------------------------ max_j abs(X(j,i)) The array is indexed by the type of error information as described below. There currently are up to three pieces of information returned. The first index in ERR_BNDS_NORM(i,:) corresponds to the ith right-hand side. The second index in ERR_BNDS_NORM(:,err) contains the following three fields: err = 1 "Trust/don't trust" boolean. Trust the answer if the reciprocal condition number is less than the threshold sqrt(n) * slamch('Epsilon'). err = 2 "Guaranteed" error bound: The estimated forward error, almost certainly within a factor of 10 of the true error so long as the next entry is greater than the threshold sqrt(n) * slamch('Epsilon'). This error bound should only be trusted if the previous boolean is true. err = 3 Reciprocal condition number: Estimated normwise reciprocal condition number. Compared with the threshold sqrt(n) * slamch('Epsilon') to determine if the error estimate is "guaranteed". These reciprocal condition numbers are 1 / (norm(Z^{-1},inf) * norm(Z,inf)) for some appropriately scaled matrix Z. Let Z = S*A, where S scales each row by a power of the radix so all absolute row sums of Z are approximately 1. This subroutine is only responsible for setting the second field above. See Lapack Working Note 165 for further details and extra cautions.ERR_BNDS_COMPERR_BNDS_COMP is DOUBLE PRECISION array, dimension (NRHS, N_ERR_BNDS) For each right-hand side, this array contains information about various error bounds and condition numbers corresponding to the componentwise relative error, which is defined as follows: Componentwise relative error in the ith solution vector: abs(XTRUE(j,i) - X(j,i)) max_j ---------------------- abs(X(j,i)) The array is indexed by the right-hand side i (on which the componentwise relative error depends), and the type of error information as described below. There currently are up to three pieces of information returned for each right-hand side. If componentwise accuracy is not requested (PARAMS(3) = 0.0), then ERR_BNDS_COMP is not accessed. If N_ERR_BNDS < 3, then at most the first (:,N_ERR_BNDS) entries are returned. The first index in ERR_BNDS_COMP(i,:) corresponds to the ith right-hand side. The second index in ERR_BNDS_COMP(:,err) contains the following three fields: err = 1 "Trust/don't trust" boolean. Trust the answer if the reciprocal condition number is less than the threshold sqrt(n) * slamch('Epsilon'). err = 2 "Guaranteed" error bound: The estimated forward error, almost certainly within a factor of 10 of the true error so long as the next entry is greater than the threshold sqrt(n) * slamch('Epsilon'). This error bound should only be trusted if the previous boolean is true. err = 3 Reciprocal condition number: Estimated componentwise reciprocal condition number. Compared with the threshold sqrt(n) * slamch('Epsilon') to determine if the error estimate is "guaranteed". These reciprocal condition numbers are 1 / (norm(Z^{-1},inf) * norm(Z,inf)) for some appropriately scaled matrix Z. Let Z = S*(A*diag(x)), where x is the solution for the current right-hand side and S scales each row of A*diag(x) by a power of the radix so all absolute row sums of Z are approximately 1. This subroutine is only responsible for setting the second field above. See Lapack Working Note 165 for further details and extra cautions.RESRES is COMPLEX*16 array, dimension (N) Workspace to hold the intermediate residual.AYBAYB is DOUBLE PRECISION array, dimension (N) Workspace.DYDY is COMPLEX*16 array, dimension (N) Workspace to hold the intermediate solution.Y_TAILY_TAIL is COMPLEX*16 array, dimension (N) Workspace to hold the trailing bits of the intermediate solution.RCONDRCOND is DOUBLE PRECISION Reciprocal scaled condition number. This is an estimate of the reciprocal Skeel condition number of the matrix A after equilibration (if done). If this is less than the machine precision (in particular, if it is zero), the matrix is singular to working precision. Note that the error may still be small even if this number is very small and the matrix appears ill- conditioned.ITHRESHITHRESH is INTEGER The maximum number of residual computations allowed for refinement. The default is 10. For 'aggressive' set to 100 to permit convergence using approximate factorizations or factorizations other than LU. If the factorization uses a technique other than Gaussian elimination, the guarantees in ERR_BNDS_NORM and ERR_BNDS_COMP may no longer be trustworthy.RTHRESHRTHRESH is DOUBLE PRECISION Determines when to stop refinement if the error estimate stops decreasing. Refinement will stop when the next solution no longer satisfies norm(dx_{i+1}) < RTHRESH * norm(dx_i) where norm(Z) is the infinity norm of Z. RTHRESH satisfies 0 < RTHRESH <= 1. The default value is 0.5. For 'aggressive' set to 0.9 to permit convergence on extremely ill-conditioned matrices. See LAWN 165 for more details.DZ_UBDZ_UB is DOUBLE PRECISION Determines when to start considering componentwise convergence. Componentwise convergence is only considered after each component of the solution Y is stable, which we definte as the relative change in each component being less than DZ_UB. The default value is 0.25, requiring the first bit to be stable. See LAWN 165 for more details.IGNORE_CWISEIGNORE_CWISE is LOGICAL If .TRUE. then ignore componentwise convergence. Default value is .FALSE..INFOINFO is INTEGER = 0: Successful exit. < 0: if INFO = -i, the ith argument to ZGBTRS had an illegal valueAuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateJune 2017doubleprecisionfunctionzla_gbrpvgrw(integerN,integerKL,integerKU,integerNCOLS,complex*16,dimension(ldab,*)AB,integerLDAB,complex*16,dimension(ldafb,*)AFB,integerLDAFB)ZLA_GBRPVGRWcomputes the reciprocal pivot growth factor norm(A)/norm(U) for a general banded matrix.Purpose:ZLA_GBRPVGRW computes the reciprocal pivot growth factor norm(A)/norm(U). The "max absolute element" norm is used. If this is much less than 1, the stability of the LU factorization of the (equilibrated) matrix A could be poor. This also means that the solution X, estimated condition numbers, and error bounds could be unreliable.ParametersNN is INTEGER The number of linear equations, i.e., the order of the matrix A. N >= 0.KLKL is INTEGER The number of subdiagonals within the band of A. KL >= 0.KUKU is INTEGER The number of superdiagonals within the band of A. KU >= 0.NCOLSNCOLS is INTEGER The number of columns of the matrix A. NCOLS >= 0.ABAB is COMPLEX*16 array, dimension (LDAB,N) On entry, the matrix A in band storage, in rows 1 to KL+KU+1. The j-th column of A is stored in the j-th column of the array AB as follows: AB(KU+1+i-j,j) = A(i,j) for max(1,j-KU)<=i<=min(N,j+kl)LDABLDAB is INTEGER The leading dimension of the array AB. LDAB >= KL+KU+1.AFBAFB is COMPLEX*16 array, dimension (LDAFB,N) Details of the LU factorization of the band matrix A, as computed by ZGBTRF. U is stored as an upper triangular band matrix with KL+KU superdiagonals in rows 1 to KL+KU+1, and the multipliers used during the factorization are stored in rows KL+KU+2 to 2*KL+KU+1.LDAFBLDAFB is INTEGER The leading dimension of the array AFB. LDAFB >= 2*KL+KU+1.AuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateDecember 2016subroutinezungbr(characterVECT,integerM,integerN,integerK,complex*16,dimension(lda,*)A,integerLDA,complex*16,dimension(*)TAU,complex*16,dimension(*)WORK,integerLWORK,integerINFO)ZUNGBRPurpose:ZUNGBR generates one of the complex unitary matrices Q or P**H determined by ZGEBRD when reducing a complex matrix A to bidiagonal form: A = Q * B * P**H. Q and P**H are defined as products of elementary reflectors H(i) or G(i) respectively. If VECT = 'Q', A is assumed to have been an M-by-K matrix, and Q is of order M: if m >= k, Q = H(1) H(2) . . . H(k) and ZUNGBR returns the first n columns of Q, where m >= n >= k; if m < k, Q = H(1) H(2) . . . H(m-1) and ZUNGBR returns Q as an M-by-M matrix. If VECT = 'P', A is assumed to have been a K-by-N matrix, and P**H is of order N: if k < n, P**H = G(k) . . . G(2) G(1) and ZUNGBR returns the first m rows of P**H, where n >= m >= k; if k >= n, P**H = G(n-1) . . . G(2) G(1) and ZUNGBR returns P**H as an N-by-N matrix.ParametersVECTVECT is CHARACTER*1 Specifies whether the matrix Q or the matrix P**H is required, as defined in the transformation applied by ZGEBRD: = 'Q': generate Q; = 'P': generate P**H.MM is INTEGER The number of rows of the matrix Q or P**H to be returned. M >= 0.NN is INTEGER The number of columns of the matrix Q or P**H to be returned. N >= 0. If VECT = 'Q', M >= N >= min(M,K); if VECT = 'P', N >= M >= min(N,K).KK is INTEGER If VECT = 'Q', the number of columns in the original M-by-K matrix reduced by ZGEBRD. If VECT = 'P', the number of rows in the original K-by-N matrix reduced by ZGEBRD. K >= 0.AA is COMPLEX*16 array, dimension (LDA,N) On entry, the vectors which define the elementary reflectors, as returned by ZGEBRD. On exit, the M-by-N matrix Q or P**H.LDALDA is INTEGER The leading dimension of the array A. LDA >= M.TAUTAU is COMPLEX*16 array, dimension (min(M,K)) if VECT = 'Q' (min(N,K)) if VECT = 'P' TAU(i) must contain the scalar factor of the elementary reflector H(i) or G(i), which determines Q or P**H, as returned by ZGEBRD in its array argument TAUQ or TAUP.WORKWORK is COMPLEX*16 array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK.LWORKLWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,min(M,N)). For optimum performance LWORK >= min(M,N)*NB, where NB is the optimal blocksize. If LWORK = -1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA.INFOINFO is INTEGER = 0: successful exit < 0: if INFO = -i, the i-th argument had an illegal valueAuthorUniv. of Tennessee Univ. of California Berkeley Univ. of Colorado Denver NAG Ltd.DateApril 2012

**Author**

Generated automatically by Doxygen for LAPACK from the source code.