Provided by: cyrus-common_3.0.13-5_amd64 bug

NAME

       cyrus.conf - Cyrus IMAP documentation

       Cyrus configuration file

DESCRIPTION

       cyrus.conf  is  the  configuration  file  for the Cyrus master(8) process.  It defines the
       startup procedures, services, events and daemons to be spawned, managed and tended  to  by
       master.

       The /etc/cyrus.conf file consists of a series of entries divided into sections of the form

          section {
              name arguments
                  ...
                  ...
                  ...
          }

       where  section  is the name of the section, name is the name of the entry and arguments is
       the whitespace-separated list of arguments for the entry.  The name may be any sequence of
       alphabetic and numeric characters, but may not contain punctuation such as '-' or '_'.  In
       the SERVICES section, names must be unique.

       Blank lines and lines beginning with ``#'' are ignored.

SECTION DESCRIPTIONS

       The paragraphs below detail the four sections (START, SERVICES, EVENTS, DAEMON)  that  can
       be  placed  in  the /etc/cyrus.conf file.  The arguments that are available for each entry
       within the section are described, and each argument's default value is shown.

       An important distinction exists between SERVICES and DAEMON  ;  the  former  have  sockets
       which  master(8)  will  listen  on  (either  IP  or  Unix domain) while the latter do not.
       Similarly, processes listed in START will be run to completion  before  any  SERVICES  are
       started, while those in DAEMON will be managed by master(8).

       NOTE:
          If  master(8) is started in debugging mode (-D) the behavior of DAEMON will be altered,
          as master(8) will no longer be backgrounded.  Thus, processes started under DAEMON  may
          not be terminated by master(8).

       Arguments  can appear in any order. Some arguments have no default value, these are listed
       with ``<no default>''.  For string arguments, the value MUST be enclosed in double quotes.

   START
       This section lists the processes to run before any SERVICES are spawned.  This section  is
       typically used to initialize databases.  Master itself will not startup until all tasks in
       START have completed, so put no blocking commands here.

       cmd=<no default>
          The command (with options) to spawn as  a  child  process.   This  string  argument  is
          required.

       NOTE:
          Prior  to  v3,  non-service  daemons  like  idled  were  started  from  START but would
          background themselves, thus not blocking.  Post v3 these are better managed through the
          DAEMON  section, under which master will provide life-cycle management (i.e. restarting
          dead processes).

   SERVICES
       This section is the heart of the /etc/cyrus.conf file.  It lists the processes that should
       be spawned to handle client connections made on certain Internet/UNIX sockets.

       babysit=0
          Integer  value  -  if  non-zero, will make sure at least one process is pre-forked, and
          will set the maxforkrate to 10 if it's zero.

       cmd=<no default>
          The command (with options) to spawn as  a  child  process.   This  string  argument  is
          required.

       listen=<no default>
          The  UNIX or internet socket to listen on.  This string field is required and takes one
          of the following forms:

          path
          [ host : ] port

          where path is the explicit path to a UNIX  socket,  host  is  either  the  hostname  or
          bracket-enclosed IP address of a network interface, and port is either a port number or
          service name (as listed in /etc/services).

          If host is missing, 0.0.0.0 (all interfaces) is assumed.  Use localhost or 127.0.0.1 to
          restict access, i.e. when a proxy on the same host is front-ending Cyrus.

          Note  that on most systems UNIX socket paths are limited to around 100 characters.  See
          your system documentation for specifics.

       proto=tcp
          The protocol used for this service (tcp, tcp4, tcp6, udp,  udp4,  udp6).   This  string
          argument is optional.

          tcp4, udp4: These arguments are used to bind the service to IPv4 only.

          tcp6, udp6: These arguments are used to bind the service to IPv6 only, if the operating
          system supports this.

          tcp, udp: These arguments are used to bind to both IPv4 and IPv6 if possible.

       prefork=0
          The number of instances of this service to  always  have  running  and  waiting  for  a
          connection  (for  faster initial response time).  This integer value is optional.  Note
          that if you are listening on multiple network types  (i.e.  ipv4  and  ipv6)  then  one
          process  will  be forked for each address, causing twice as many processes as you might
          expect.

       maxchild=-1
          The maximum number of instances of  this  service  to  spawn.   A  value  of  -1  means
          unlimited.  This integer value is optional.

       maxfds=256
          The  maximum  number  of  file descriptors to which to limit this process. This integer
          value is optional.

       maxforkrate=0
          Maximum number of processes to fork per second -  the  master  will  insert  sleeps  to
          ensure it doesn't fork faster than this on average.

   EVENTS
       This  section  lists  processes  that should be run at specific intervals, similar to cron
       jobs.  This section is typically used to perform scheduled cleanup/maintenance.

       cmd=<no default>
          The command (with options) to spawn as  a  child  process.   This  string  argument  is
          required.

       period=0
          The interval (in minutes) at which to run the command.  This integer value is optional,
          but SHOULD be a positive integer > 10.

       at=<hhmm>
          The time (24-hour format) at which to run the command each day.  If set to a valid time
          (0000-2359), period is automatically set to 1440. This string argument is optional.

   DAEMON
       This  section  lists  long running daemons to start before any SERVICES are spawned.  They
       will be shutdown when master(8) is exiting.

       cmd=<no default>
          The command (with options) to spawn as  a  child  process.   This  string  argument  is
          required.

EXAMPLES

       # example cyrus.conf

       START {
           recover       cmd="ctl_cyrusdb -r"
       }

       SERVICES {
           imap          cmd="imapd" listen="imap" prefork=1
           imaps         cmd="imapd -s" listen="imaps" prefork=0
           lmtpunix      cmd="lmtpd" listen="/var/imap/socket/lmtp"
           lmtp          cmd="lmtpd" listen="localhost:lmtp"
       }

       EVENTS {
           checkpoint    cmd="ctl_cyrusdb -c" period=30
           delprune      cmd="cyr_expire -E 3" at=0400
           tlsprune      cmd="tls_prune" at=0400
       }

       DAEMON {
           idled         cmd="idled"
       }

ACCESS CONTROL

       When  TCP  Wrappers  is  used to control access to Cyrus services, the name of the service
       entry should be used as the process name in the hosts_access(5) table.  For  instance,  in
       the  example  above,  "imap",  "imaps", "lmtpunix" and "lmtp" would be used as the process
       names.  This allows a single daemon such  as  imapd  to  be  run  in  different  modes  or
       configurations  (i.e.,  SSL  and  non-SSL  enabled) yet still have separate access control
       rules.

SEE ALSO

       master(8),   imapd(8),   pop3d(8),   lmtpd(8),   timsieved(8),    idled(8),    notifyd(8),
       ctl_cyrusdb(8), ctl_deliver(8), tls_prune(8), hosts_access(5)

AUTHOR

       The Cyrus Team, Nic Bernstein (Onlight)

COPYRIGHT

       1993-2017, The Cyrus Team