Provided by: rygel_0.38.3-1ubuntu1_amd64 bug

NAME

       rygel.conf - Rygel configuration file

SYNOPSIS

       $XDG_CONFIG_DIR/rygel.conf

       /etc/rygel.conf

DESCRIPTION

       rygel reads its configuration values from the file $XDG_CONFIG_DIR/rygel.conf or a file
       given on command line with the --config option. If that file does not exist it uses the
       file /etc/rygel.conf.

       Most of the options may be overriden by commandline arguments or envronment variables. See
       rygel(1) for details on those.

GENERAL DIRECTIVES

       Lists in the configuration files are separated by a semicolon (;). Boolean values may be
       either true or false.

       interface=INTERFACE
           Semicolon separated list separated of the network interfaces rygel should listen on.
           May be an IP, an interface name or on Linux even the ESSID of a wireless network.

       port=PORT
           Set the listen-port.

       enable-transcoding
           Set to true to enable transcoding in general.

       log-level=DOMAIN:LEVEL[,DOMAIN:LEVEL,...]
           Comma-separated list of DOMAIN:LEVEL pairs, allowing to set the log level individually
           for each domain, where DOMAIN is eiher "*", "rygel" or the name of a plugin. Allowed
           log levels are 1=error, 2=critical, 3=warning, 4=message/info, 5=debug. Note that on
           recent versions of GLib (>= 2.36) it is required to set the environment variable
           G_MESSAGES_DEBUG to all to get any debug output.

       plugin-path=PATH
           Set the plugin search path.

       engine-path=PATH
           Set the engine search path.

       media-engine=ENGINE
           Name of the loadable module to use as media engine back-end.

       allow-upload
           Allow uploading of media files via UPnP.

       allow-deletion
           Allow remote media file deletion via UPnP.

       video-upload-folder
           If allow-upload is true, use this folder to store uploaded videos. It defaults to
           @VIDEOS@ which expands to the default directory for video files (usually
           $HOME/Videos).

       music-upload-folder
           If allow-upload is true, use this folder to store uploaded music files. It defaults to
           @MUSIC@ which expands to the default directory for music files (usually $HOME/Music).

       picture-upload-folder
           If allow-upload is true, use this folder to store uploaded pictures. It defaults to
           @PICTURES@ which expands to the default directory for picture files (usually
           $HOME/Pictures).

       force-downgrade-for
           Semicolon-separated list of device user-agents (or parts thereof) which need a forced
           downgrade to MediaServer:1 and/or ContentDirectory:1.

               Warning
               Only use this parameter if you know what your're doing or are being told to do so;
               overriding the default value might cause incompatibilites. If you find that adding
               your device here enables its usage with Rygel, please file an IOP bug[1] so we can
               include it into the default configuration.

       acl-fallback-policy
           This is the default policy that is used if no access control provider is found on the
           D-Bus. Use true to allow access from every peer, false to deny all access. If it is
           not specified, the default fall-back policy is true.

DATABASE SETTINGS

       The settings in the [Database]section are for the database support library.

       debug
           Set to true to show the SQL statements used.

GSTREAMER MEDIA ENGINE SETTINGS

       The settings in the [GstMediaEngine] section are specific to the GStreamer media engine,
       which is the default media engine. See the media-engine setting. These following options
       are available for the GStreamer[2] media engine.

       transcoders
           A semicolon-separated list of the active transcoders. This setting has no effect if
           enable-transcoding is set to false. Possible values are: lpcm,mp3,mp2ts,aac,avc or
           wmv. Its default value is lpcm;mp3;mp2ts;aac;wmv.

PLUGIN-SPECIFIC SETTINGS

       Sections for plugins are denoted with [PluginName] and can contain options specific to a
       plugin (see below) as well these common options:

       title=TITLE
           Title of the device implemented by this plugin. There are some variables which will be
           replaced by rygel.  @REALNAME@ will be subsituted by the user's real name, @USERNAME@
           by the user's login id and @HOSTNAME@ by the name of the machine rygel runs on.

       enabled
           You can individually enable or disable plugins by setting this to true or false.

       energy-management
           Set to true to if you would like the UPnP device to contain a EnergyManagement
           service. Not that additional configuration is required, see EnergyManagement settings.

       diagnostics
           Set to true if you would like the UPnP device to contain a BasicManagement:2 service
           that allows running tools like ping, nslookup and traceroute remotely.

       server-name
           A string that will be sent as the "Server:" header in a HTTP response.

ENERGYMANAGEMENT SETTINGS

       The settings in [EnergyManagement-IFACENAME] sections specify the settings that relate to
       EnergyManagement services on this interface. Example: [EnergyManagement-eth0].

       mode-on-suspend
           The NetworkInterfaceMode that should be used when suspended. Default is
           "Unimplemented", other valid values are "IP-up-Periodic”, "IP-down-no-Wake",
           "IP-down-with-WakeOn", "IP-down-with-WakeAuto", "IP-down-with-WakeOnAuto".

       supported-transport
           Optional WakeSupportedTransport that the service should advertize. Valid values are
           "UDP-Broadcast", "UDP-Unicast", "TCP-Unicast", "Other".

       password
           Optional hexadecimal password that will be used to build the WakeOnPattern.

TRACKER PLUGIN

       The tracker plugin uses the centralized database of meta information from the tracker
       project. See the tracker project website[3] for more information about tracker.

       share-pictures
           Enable or disable sharing of all pictures in the Tracker database.

       share-videos
           Enable or disable sharing of all videos in the Tracker database.

       share-music
           Enable or disable sharing of all music in the Tracker database.

MEDIAEXPORT PLUGIN

       The MediaExport plugin is an alternative to the tracker-backed media export. It extracts
       meta-data by itself and stores it in a SQLite[4] database in
       $XDG_CACHE_DIR/rygel/media-export.db on UNIX platforms.

           Note
           If both plugins, Tracker as well as MediaExport are enabled, MediaExport will disable
           itself in favour of the Tracker plugin.

       There are several options supported by this plugin:

       uris
           A list of URIS to expose via UPnP. May be files, folders or anything supported by
           GVFS. If left emtpy it defaults to export the user's music, video and picture folders
           as defined per XDG special user directories spec. These default folders can be
           referenced by @MUSIC@, @PICTURES@ and @VIDEOS@. Locations can be entered as either
           fully escaped URIS or normal paths.

               Note
               If you enter a normal path that contains whitespace there is no need to escape
               them with either a backslash or putting the string in quotes.

               Note
               It is strongly advised against using an exported folder as a target for downloads
               when extract-metadata is enabled. Rygel will most likely blacklist the files then
               because they will fail to extract.

           Example 1. Possible values for uris

           uris=@MUSIC@;/home/user/My Pictures;file:///home/user/My%20Videos

       extract-metadata
           Set to false if you do not care about duration or any other meta-data like artist.
           This speeds up the initial crawl of the media a lot. Use it to quickly share some
           files via UPnP. Make sure to define an include-filter, otherwise you will end up with
           a lot of files exposed which the client cannot display anyway.

       monitor-changes
           Set to false if you don't want to have new files picked up automatically by rygel.

       monitor-grace-timeout
           Time in seconds to wait after a new file has been detected before trying to extract
           meta-data from it. Useful if you're downloading to a directory watched by rygel.
           Default is 5 seconds.

       virtual-folders
           Set to false if you don't need the virtual folder hierarchy.

PLAYBIN PLUGIN

       The Playbin plugin implements a media renderer (Digtal Media Renderer, DMR in DLNA terms).
       This plugin was known as GstRenderer.

       It is highly recommended to leave the sink choice to playbin. If, however, the default
       choices don't work for you they can be reconfigured as follows

       audio-sink
           Definition of the audio sink to use. Can be a single element or a partial pipeline
           definition in gst-launch's syntax

       video-sink
           Definition of the video sink to use. Can be a single element or a partial pipeline
           definition in gst-launch's syntax

LIGHTMEDIASCANNER PLUGIN

       The LightMediaScanner plugin exports the contents of the lightmediascanner daemon[5]

       This plugin does not have any special options.

GSTLAUNCH PLUGIN

       The GstLaunch plugin allows to expose GStreamer pipelines using the same syntax as the
       gst-launch utilty. You can configure several items in this plugins.

       launch-items
           A list of of identifiers for the pipelines to be exposed.

       identifier-title
           Title of the device represented by this pipeline. Identifier is the identifier as set
           in launch-items

       identifier-mime
           Mime-type of the pipeline.

       identifier-launch
           Definition of the pipeline in gst-launch syntax. For some examples on writing
           pipelines see gst-launch(1).

       identifier-dlnaprofile
           DLNA profile for the stream.

       An example configuration is available in the distributed configuration file
       /etc/rygel.conf.

EXTERNAL

       The External plugin is an consumer of the MediaServer2 DBus interface specification[6].
       This allows external programs to share their data via UPnP by implementing this DBus
       specification. The plugin picks up any implementation of this interface on the session bus
       and exposes the presented media via UPnP. Known implementors of this spec are
       gnome-dvb-daemon[7], Rhythmbox[8] and Grilo[9] via the grilo-ms2 project.

       You can disable the whole functionality by setting enabled=false in the [External] section
       of the configuration file.

       Individual peers may be enabled or disabled by creating sections corresponding to the
       D-Bus names of the peer:

           [org.gnome.UPnP.MediaServer2.Rhythmbox]
           enabled=false

       This plugin has no additional options.

MPRIS

       The MPRIS plugin is a consumer of the MPRIS2 DBus interface specification[10]. The
       implementation conforms to version 2.0 of the standard.

       rygel exposes media players that implement the provider side of this DBus specification as
       DLNA Digital Media Renderers (DMR) similar to the Playbin plugin. This means that you can
       easily turn your media player into a DMR by implementing this DBus specification.

       Players that implement this spec and are known to work with rygel are Banshee[11],
       Rhythmbox[8] and GNOME Videos (previously known as Totem)[12]

       You can disable the whole functionality by setting enabled=false in the [MRPIS] section of
       the configuration file.

       The configuration of this plugin is special. Plugin configuration is not done on the
       plugin but rather per peer that is found providing the MPRIS2 interface. See the following
       example to set the title for Banshee on MPRIS:

           [org.mpris.MediaPlayer2.banshee]
           title=@REALNAME@'s Banshee on @HOSTNAME@

       This plugin has no additional options.

SEE ALSO

       rygel(1), gst-launch(1)

AUTHOR

       Jens Georg <mail@jensge.org>
           Wrote this manpage.

NOTES

        1. file an IOP bug
           https://gitlab.gnome.org/GNOME/rygel/issues/new/?issuable_template=IOP

        2. GStreamer
           http://gstreamer.freedesktop.org

        3. tracker project website
           https://wiki.gnome.org/Projects/Tracker

        4. SQLite
           http://sqlite.org

        5. lightmediascanner daemon
           https://github.com/profusion/lightmediascanner

        6. MediaServer2 DBus interface specification
           https://wiki.gnome.org/Projects/Rygel/MediaServer2Spec

        7. gnome-dvb-daemon
           https://wiki.gnome.org/Projects/DVBDaemon

        8. Rhythmbox
           http://www.rhythmbox.org

        9. Grilo
           https://wiki.gnome.org/Projects/Grilo

       10. MPRIS2 DBus interface specification
           https://specifications.freedesktop.org/mpris-spec/latest/

       11. Banshee
           http://banshee.fm

       12. GNOME Videos (previously known as Totem)
           https://wiki.gnome.org/Apps/Videos