Provided by: sympa_6.2.40~dfsg-4_amd64 bug

NAME

       sympa.conf, robot.conf - Configuration file for default site and robot

DESCRIPTION

       /etc/sympa/sympa/sympa.conf is main configuration file of Sympa.  Several parameters
       defined in this file may be overridden by robot.conf configuration file for each virtual
       domain, or by config configuration file for each mailing list.

       Format of sympa.conf and robot.conf is as following:

       •   Lines beginning with "#" and containing only spaces are ignored.

       •   Each line has the form "parameter value".  value may contain spaces but may not
           contain newlines.

PARAMETERS

       Below is entire list of configuration parameters.  "Default" is built-in default value if
       any.  "Overrides" lists contexts (with parameter name) which can override settings in
       site-wide context (sympa.conf): Virtual domain (robot.conf) and/or List (config).

   Service description
       "domain"

       Primary mail domain name

       Default:
           None, mandatory.

       Overrides:
           Virtual domain

       Example:

         domain mail.example.org

       "listmaster"

       Email addresses of listmasters

       Default:
           None, mandatory.

       Overrides:
           Virtual domain

       Email addresses of the listmasters (users authorized to perform global server commands).
       Some error reports may also be sent to these addresses. Listmasters can be defined for
       each virtual host, however, the default listmasters will have privileges to manage all
       virtual hosts.

       Example:

         listmaster your_email_address@domain.tld

       "lang"

       Default language

       Default:
           "en-US"

       Overrides:
           Virtual domain

           List

       This is the default language used by Sympa. One of supported languages should be chosen.

       "supported_lang"

       Supported languages

       Default:
           "ca,cs,de,el,en-US,es,et,eu,fi,fr,gl,hu,it,ja,ko,nb,nl,oc,pl,pt-BR,ru,sv,tr,vi,zh-CN,zh-TW"

       Overrides:
           Virtual domain

       All supported languages for the user interface. Languages proper locale information not
       installed are ignored.

       "title"

       Title of service

       Default:
           "Mailing lists service"

       Overrides:
           Virtual domain

       The name of your mailing list service. It will appear in the header of web interface and
       subjects of several service messages.

       "gecos"

       Display name of Sympa

       Default:
           "SYMPA"

       Overrides:
           Virtual domain

       This parameter is used for display name in the "From:" header field for the messages sent
       by Sympa itself.

       "legacy_character_support_feature"

       Support of legacy character set

       Default:
           "off"

       Overrides:
           None.

       If set to "on", enables support of legacy character set according to charset.conf(5)
       configuration file.

       In some language environments, legacy encoding (character set) can be preferred for e-mail
       messages: for example iso-2022-jp in Japanese language.

   Database related
       "update_db_field_types"

       Update database structure

       Default:
           "auto"

       Overrides:
           None.

       auto: Updates database table structures automatically.

       However, since version 5.3b.5, Sympa will not shorten field size if it already have been
       longer than the size defined in database definition.

       "db_type"

       Type of the database

       Default:
           "mysql"

       Overrides:
           None.

       Possible types are "MySQL", "PostgreSQL", "Oracle" and "SQLite".

       "db_host"

       Hostname of the database server

       Default:
           None.

       Overrides:
           None.

       With PostgreSQL, you can also use the path to Unix Socket Directory, e.g.
       "/var/run/postgresql" for connection with Unix domain socket.

       Example:

         db_host localhost

       "db_port"

       Port of the database server

       Default:
           None.

       Overrides:
           None.

       "db_name"

       Name of the database

       Default:
           "sympa"

       Overrides:
           None.

       With SQLite, this must be the full path to database file.

       With Oracle Database, this must be SID, net service name or easy connection identifier (to
       use net service name, db_host should be set to "none" and HOST, PORT and SERVICE_NAME
       should be defined in tnsnames.ora file).

       "db_user"

       User for the database connection

       Default:
           "user_name"

       Overrides:
           None.

       Example:

         db_user sympa

       "db_passwd"

       Password for the database connection

       Default:
           "user_password"

       Overrides:
           None.

       What ever you use a password or not, you must protect the SQL server (is it not a public
       internet service ?)

       Example:

         db_passwd your_passwd

       "db_options"

       Database options

       Default:
           None.

       Overrides:
           None.

       If these options are defined, they will be appended to data source name (DSN) fed to
       database driver. Check the related DBD documentation to learn about the available options.

       Example:

         db_options mysql_read_default_file=/home/joe/my.cnf;mysql_socket=tmp/mysql.sock-test

       "db_env"

       Environment variables setting for database

       Default:
           None.

       Overrides:
           None.

       With Oracle Database, this is useful for defining ORACLE_HOME and NLS_LANG.

       Example:

         db_env NLS_LANG=American_America.AL32UTF8;ORACLE_HOME=/u01/app/oracle/product/11.2.0/server

       "db_timeout"

       Database processing timeout

       Default:
           None.

       Overrides:
           None.

       Currently, this parameter may be used for SQLite only.

       "db_additional_subscriber_fields"

       Database private extension to subscriber table

       Default:
           None.

       Overrides:
           None.

       Adds more fields to "subscriber_table" table. Sympa recognizes fields defined with this
       parameter. You will then be able to use them from within templates and scenarios:

       * for scenarios: [subscriber->field]

       * for templates: [% subscriber.field %]

       These fields will also appear in the list members review page and will be editable by the
       list owner. This parameter is a comma-separated list.

       You need to extend the database format with these fields

       Example:

         db_additional_subscriber_fields billing_delay,subscription_expiration

       "db_additional_user_fields"

       Database private extension to user table

       Default:
           None.

       Overrides:
           None.

       Adds more fields to "user_table" table. Sympa recognizes fields defined with this
       parameter. You will then be able to use them from within templates: [% subscriber.field %]

       This parameter is a comma-separated list.

       You need to extend the database format with these fields

       Example:

         db_additional_user_fields age,address

   System log
       "syslog"

       System log facility for Sympa

       Default:
           "LOCAL1"

       Overrides:
           None.

       Do not forget to configure syslog server.

       "log_socket_type"

       Communication mode with syslog server

       Default:
           "unix"

       Overrides:
           None.

       "log_level"

       Log verbosity

       Default:
           0

       Overrides:
           Virtual domain

       Sets the verbosity of logs.

       0: Only main operations are logged

       3: Almost everything is logged.

       Example:

         log_level 2

   Alias management
       "aliases_program"

       Program used to update alias database

       Default:
           "newaliases"

       Overrides:
           Virtual domain

       This may be "makemap", "newaliases", "postalias", "postmap" or full path to custom
       program.

       "aliases_db_type"

       Type of alias database

       Default:
           "hash"

       Overrides:
           Virtual domain

       "btree", "dbm", "hash" and so on.  Available when aliases_program is "makemap",
       "postalias" or "postmap"

       "sendmail_aliases"

       Path of the file that contains all list related aliases

       Default:
           $SENDMAIL_ALIASES

       Overrides:
           Virtual domain

       It is recommended to create a specific alias file so that Sympa never overwrites the
       standard alias file, but only a dedicated file.

       Set this parameter to "none" if you want to disable alias management in Sympa.

       "alias_manager"

       Path to alias manager

       Default:
           "$SBINDIR/alias_manager.pl"

       Overrides:
           None.

       The absolute path to the script that will add/remove mail aliases

       Example:

         alias_manager /usr/local/libexec/ldap_alias_manager.pl

   Receiving
       "default_max_list_members"

       Default maximum number of list members

       Default:
           0

       Overrides:
           Virtual domain

           List ("max_list_members")

       Default limit for the number of subscribers per list (0 means no limit).

       "max_size"

       Maximum size of messages

       Default:
           5242880 (bytes)

       Overrides:
           Virtual domain

           List

       Incoming messages smaller than this size is allowed distribution by Sympa.

       Example:

         max_size 2097152

       "reject_mail_from_automates_feature"

       Reject mail sent from automated services to list

       Default:
           "on"

       Overrides:
           List

       Rejects messages that seem to be from automated services, based on a few header fields
       ("Content-Identifier:", "Auto-Submitted:").

       Sympa also can be configured to reject messages based on the "From:" header field value
       (see "loop_prevention_regex").

       Example:

         reject_mail_from_automates_feature off

       "sender_headers"

       Header field name(s) used to determine sender of the messages

       Default:
           "From"

       Overrides:
           None.

       "Return-Path" means envelope sender (a.k.a. "UNIX From") which will be alternative to
       sender of messages without "From" field.  "Resent-From" may also be inserted before
       "From", because some mailers add it into redirected messages and keep original "From"
       field intact.  In particular cases, "Return-Path" can not give right sender: several mail
       gateway products rewrite envelope sender and add original one as non-standard field such
       as "X-Envelope-From".  If that is the case, you might want to insert it in place of
       "Return-Path".

       Example:

         sender_headers Resent-From,From,Return-Path

       "misaddressed_commands"

       Reject misaddressed commands

       Default:
           "reject"

       Overrides:
           None.

       When a mail command is sent to a list, by default Sympa rejects this message. This feature
       can be turned off setting this parameter to "ignore".

       "misaddressed_commands_regexp"

       Regular expression matching with misaddressed commands

       Default:
           "((subscribe\s+(\S+)|unsubscribe\s+(\S+)|signoff\s+(\S+)|set\s+(\S+)\s+(mail|nomail|digest))\s*)"

       Overrides:
           None.

       Perl regular expression applied on messages subject and body to detect misaddressed
       commands.

       "sympa_priority"

       Priority for command messages

       Default:
           1

       Overrides:
           Virtual domain

       Priority applied to messages sent to Sympa command address.

       "request_priority"

       Priority for messages bound for list owners

       Default:
           0

       Overrides:
           Virtual domain

       Priority for processing of messages bound for "LIST-request" address, i.e. owners of the
       list

       "owner_priority"

       Priority for non-VERP bounces

       Default:
           9

       Overrides:
           Virtual domain

       Priority for processing of messages bound for "LIST-owner" address, i.e. non-delivery
       reports (bounces).

       "default_list_priority"

       Default priority for list messages

       Default:
           5

       Overrides:
           Virtual domain

           List ("priority")

       Priority for processing of messages posted to list addresses.

       "incoming_max_count"

       Max number of sympa.pl workers

       Default:
           1

       Overrides:
           None.

       Max number of workers of sympa.pl daemon processing incoming spool.

       "sleep"

       Interval between scanning incoming message spool

       Default:
           5 (seconds)

       Overrides:
           None.

       Must not be 0.

   Sending related
       "anonymous_header_fields"

       Header fields removed when a mailing list is setup in anonymous mode

       Default:
           "Authentication-Results,Disposition-Notification-To,DKIM-Signature,Injection-Info,Organisation,Organization,Original-Recipient,Originator,Path,Received,Received-SPF,Reply-To,Resent-Reply-To,Return-Receipt-To,X-Envelope-From,X-Envelope-To,X-Sender,X-X-Sender"

       Overrides:
           None.

       See "anonymous_sender" list parameter.

       Default value prior to Sympa 6.1.19 is:

         Sender,X-Sender,Received,Message-id,From,X-Envelope-To,Resent-From,Reply-To,Organization,Disposition-Notification-To,X-Envelope-From,X-X-Sender

       "merge_feature"

       Allow message personalization by default

       Default:
           "off"

       Overrides:
           List

       This parameter defines the default "merge_feature" list parameter.

       "remove_headers"

       Header fields to be removed from incoming messages

       Default:
           "X-Sympa-To,X-Family-To,Return-Receipt-To,Precedence,X-Sequence,Disposition-Notification-To,Sender"

       Overrides:
           List

       Use it, for example, to ensure some privacy for your users in case that "anonymous_sender"
       mode is inappropriate.

       The removal of these header fields is applied before Sympa adds its own header fields
       ("rfc2369_header_fields" and "custom_header").

       Example:

         remove_headers Resent-Date,Resent-From,Resent-To,Resent-Message-Id,Sender,Delivered-To

       "remove_outgoing_headers"

       Header fields to be removed before message distribution

       Default:
           "none"

       Overrides:
           List

       The removal happens after Sympa's own header fields are added; therefore, it is a
       convenient way to remove Sympa's own header fields (like "X-Loop:" or "X-no-archive:") if
       you wish.

       Example:

         remove_outgoing_headers X-no-archive

       "rfc2369_header_fields"

       RFC 2369 header fields

       Default:
           "help,subscribe,unsubscribe,post,owner,archive"

       Overrides:
           List

       Specify which RFC 2369 mailing list header fields to be added.

       "List-Id:" header field defined in RFC 2919 is always added. Sympa also adds "Archived-
       At:" header field defined in RFC 5064.

       "urlize_min_size"

       Minimum size to be urlized

       Default:
           10240 (bytes)

       Overrides:
           Virtual domain

       When a subscriber chose "urlize" reception mode, attachments not smaller than this size
       will be urlized.

       "allowed_external_origin"

       Allowed external links in sanitized HTML

       Default:
           None.

       Overrides:
           Virtual domain

       When the HTML content of a message must be sanitized, links ("href" or "src" attributes)
       with the hosts listed in this parameter will not be scrubbed. If "*" character is
       included, it matches any subdomains. Single "*" allows any hosts.

       Example:

         allowed_external_origin *.example.org,www.example.com

       "sympa_packet_priority"

       Default priority for a packet

       Default:
           5

       Overrides:
           Virtual domain

       The default priority set to a packet to be sent by the bulk.

       "bulk_fork_threshold"

       Fork threshold of bulk daemon

       Default:
           1

       Overrides:
           None.

       The minimum number of packets before bulk daemon forks a new worker to increase sending
       rate.

       "bulk_max_count"

       Maximum number of bulk workers

       Default:
           3

       Overrides:
           None.

       "bulk_lazytime"

       Idle timeout of bulk workers

       Default:
           600 (seconds)

       Overrides:
           None.

       The number of seconds a bulk worker will remain running without processing a message
       before it spontaneously exits.

       "bulk_sleep"

       Sleep time of bulk workers

       Default:
           1 (seconds)

       Overrides:
           None.

       The number of seconds a bulk worker sleeps between starting a new loop if it didn't find a
       message to send.

       Keep it small if you want your server to be reactive.

       "bulk_wait_to_fork"

       Interval between checks of packet numbers

       Default:
           10 (seconds)

       Overrides:
           None.

       Number of seconds a master bulk daemon waits between two packets number checks.

       Keep it small if you expect brutal increases in the message sending load.

       "sendmail"

       Path to sendmail

       Default:
           "/usr/sbin/sendmail"

       Overrides:
           None.

       Absolute path to sendmail command line utility (e.g.: a binary named "sendmail" is
       distributed with Postfix).

       Sympa expects this binary to be sendmail compatible (exim, Postfix, qmail and so on
       provide it).

       "sendmail_args"

       Command line parameters passed to sendmail

       Default:
           "-oi -odi -oem"

       Overrides:
           None.

       Note that "-f", "-N" and "-V" options and recipient addresses should not be included,
       because they will be included by Sympa.

       "log_smtp"

       Log invocation of sendmail

       Default:
           "off"

       Overrides:
           Virtual domain

       This can be overwritten by "-m" option for sympa.pl.

       "maxsmtp"

       Maximum number of sendmail processes

       Default:
           40

       Overrides:
           None.

       Maximum number of simultaneous child processes spawned by Sympa. This is the main load
       control parameter.

       Proposed value is quite low, but you can rise it up to 100, 200 or even 300 with powerful
       systems.

       Example:

         maxsmtp 500

       "nrcpt"

       Maximum number of recipients per call to sendmail

       Default:
           25

       Overrides:
           None.

       This grouping factor makes it possible for the sendmail processes to optimize the number
       of SMTP sessions for message distribution. If needed, you can limit the number of
       recipients for a particular domain. Check the "nrcpt_by_domain.conf" configuration file.

       "avg"

       Maximum number of different mail domains per call to sendmail

       Default:
           10

       Overrides:
           None.

   Privileges
       "create_list"

       Who is able to create lists

       Default:
           "public_listmaster"

       Overrides:
           Virtual domain

       Value of this parameter is name of "create_list" scenario.

       Defines who can create lists (or request list creation) by creating new lists or by
       renaming or copying existing lists.

       Example:

         create_list intranet

       "allow_subscribe_if_pending"

       Allow adding subscribers to a list not open

       Default:
           "on"

       Overrides:
           Virtual domain

       If set to "off", adding subscribers to, or removing subscribers from a list with status
       other than "open" is forbidden.

       "global_remind"

       Who is able to send remind messages over all lists

       Default:
           "listmaster"

       Overrides:
           None.

       Value of this parameter is name of "global_remind" scenario.

       "move_user"

       Who is able to change user's email

       Default:
           "auth"

       Overrides:
           Virtual domain

       Value of this parameter is name of "move_user" scenario.

       "use_blacklist"

       Use blacklist

       Default:
           "send,create_list"

       Overrides:
           Virtual domain

       List of operations separated by comma for which blacklist filter is applied.  Setting this
       parameter to "none" will hide the blacklist feature.

       "owner_domain"

       List of required domains for list owner addresses

       Default:
           None.

       Overrides:
           Virtual domain

           List

       Restrict list ownership to addresses in the specified domains. This can be used to reserve
       list ownership to a group of trusted users from a set of domains associated with an
       organization, while allowing moderators and subscribers from the Internet at large.

       Example:

         owner_domain domain1.tld domain2.tld

       "owner_domain_min"

       Minimum number of owners for each list that must match owner_domain restriction

       Default:
           0

       Overrides:
           Virtual domain

           List

       Minimum number of owners for each list must satisfy the owner_domain restriction. The
       default of zero (0) means *all* list owners must match. Setting to 1 requires only one
       list owner to match owner_domain; all other owners can be from any domain. This setting
       can be used to ensure that there is always at least one known contact point for any
       mailing list.

       Example:

         owner_domain_min 1

   Archives
       "process_archive"

       Store distributed messages into archive

       Default:
           "off"

       Overrides:
           Virtual domain

           List

       If enabled, distributed messages via lists will be archived. Otherwise archiving is
       disabled.

       Note that even if setting this parameter disabled, past archives will not be removed and
       will be accessible according to access settings by each list.

       "default_archive_quota"

       Default disk quota for lists' archives

       Default:
           None (Kbytes).

       Overrides:
           List ("archive.quota")

       "ignore_x_no_archive_header_feature"

       Ignore "X-no-archive:" header field

       Default:
           "off"

       Overrides:
           None.

       Sympa's default behavior is to skip archiving of incoming messages that have an "X-no-
       archive:" header field set. This parameter allows one to change this behavior.

       Example:

         ignore_x_no_archive_header_feature on

       "custom_archiver"

       Custom archiver

       Default:
           None.

       Overrides:
           None.

       Activates a custom archiver to use instead of MHonArc. The value of this parameter is the
       absolute path to the executable file.

       Sympa invokes this file with these two arguments:

       --list

       The address of the list including domain part.

       --file

       Absolute path to the message to be archived.

       "mhonarc"

       Path to MHonArc mail-to-HTML converter

       Default:
           "/usr/bin/mhonarc"

       Overrides:
           Virtual domain

       This is required for HTML mail archiving.

   Bounce management and tracking
       "bounce_warn_rate"

       Default bounce warn rate

       Default:
           30

       Overrides:
           List ("bounce.warn_rate")

       The list owner receives a warning whenever a message is distributed and the number
       (percentage) of bounces exceeds this value.

       "bounce_halt_rate"

       Default bounce halt rate

       Default:
           50

       Overrides:
           None.

       NOT USED YET. If bounce rate reaches the halt_rate, messages for the list will be halted,
       i.e. they are retained for subsequent moderation.

       "default_bounce_level1_rate"

       Default bounce management threshold, 1st level

       Default:
           45

       Overrides:
           Virtual domain

           List ("bouncers_level1.rate")

       "default_bounce_level2_rate"

       Default bounce management threshold, 2nd level

       Default:
           75

       Overrides:
           Virtual domain

           List ("bouncers_level2.rate")

       "verp_rate"

       Percentage of list members in VERP mode

       Default:
           "0%"

       Overrides:
           Virtual domain

           List

       Uses variable envelope return path (VERP) to detect bouncing subscriber addresses.

       0%: VERP is never used.

       100%: VERP is always in use.

       VERP requires address with extension to be supported by MTA. If tracking is enabled for a
       list or a message, VERP is applied for 100% of subscribers.

       "tracking_delivery_status_notification"

       Tracking message by delivery status notification (DSN)

       Default:
           "off"

       Overrides:
           List ("tracking.delivery_status_notification")

       "tracking_message_disposition_notification"

       Tracking message by message disposition notification (MDN)

       Default:
           "off"

       Overrides:
           List ("tracking.message_disposition_notification")

       "tracking_default_retention_period"

       Max age of tracking information

       Default:
           90 (days)

       Overrides:
           List ("tracking.retention_period")

       Tracking information is removed after this number of days

       "welcome_return_path"

       Remove bouncing new subscribers

       Default:
           "owner"

       Overrides:
           List

       If set to unique, the welcome message is sent using a unique return path in order to
       remove the subscriber immediately in the case of a bounce.

       "remind_return_path"

       Remove subscribers bouncing remind message

       Default:
           "owner"

       Overrides:
           List

       Same as welcome_return_path, but applied to remind messages.

       "default_remind_task"

       Periodical subscription reminder task

       Default:
           None.

       Overrides:
           List ("remind_task")

       This task regularly sends subscribers a message which reminds them of their list
       subscriptions.

       "expire_bounce_task"

       Task for expiration of old bounces

       Default:
           "daily"

       Overrides:
           None.

       This task resets bouncing information for addresses not bouncing in the last 10 days after
       the latest message distribution.

       "purge_orphan_bounces_task"

       Task for cleaning invalidated bounces

       Default:
           "monthly"

       Overrides:
           None.

       This task deletes bounce information for unsubscribed users.

       "eval_bouncers_task"

       Task for updating bounce scores

       Default:
           "daily"

       Overrides:
           None.

       This task scans all bouncing users for all lists, and updates "bounce_score_subscriber"
       field in "subscriber_table" table. The scores may be used for management of bouncers.

       "process_bouncers_task"

       Task for management of bouncers

       Default:
           "weekly"

       Overrides:
           None.

       This task executes actions on bouncing users configured by each list, according to their
       scores.

       "purge_tables_task"

       Task for cleaning tables

       Default:
           "daily"

       Overrides:
           None.

       This task cleans old tracking information from "notification_table" table.

       "minimum_bouncing_count"

       Minimum number of bounces

       Default:
           10

       Overrides:
           None.

       The minimum number of bounces received to update bounce score of a user.

       "minimum_bouncing_period"

       Minimum bouncing period

       Default:
           10 (days)

       Overrides:
           None.

       The minimum period for which bouncing lasted to update bounce score of a user.

       "bounce_delay"

       Delay of bounces

       Default:
           0 (days)

       Overrides:
           None.

       Average time for a bounce sent back to mailing list server after a post was sent to a
       list. Usually bounces are sent back on the same day as the original message.

       "bounce_email_prefix"

       Default:
           "bounce"

       Overrides:
           None.

       The prefix to consist the return-path of probe messages used for bounce management, when
       variable envelope return path (VERP) is enabled. VERP requires address with extension to
       be supported by MTA.

       If you change the default value, you must modify the mail aliases too.

       "return_path_suffix"

       Suffix of list return address

       Default:
           "-owner"

       Overrides:
           None.

       The suffix appended to the list name to form the return-path of messages distributed
       through the list. This address will receive all non-delivery reports (also called
       bounces).

   Loop prevention
       "loop_command_max"

       Maximum number of responses to command message

       Default:
           200

       Overrides:
           None.

       The maximum number of command reports sent to an email address. Messages are stored in
       "bad" subdirectory of incoming message spool, and reports are not longer sent.

       "loop_command_sampling_delay"

       Delay before counting responses to command message

       Default:
           3600 (seconds)

       Overrides:
           None.

       This parameter defines the delay in seconds before decrementing the counter of reports
       sent to an email address.

       "loop_command_decrease_factor"

       Decrementing factor of responses to command message

       Default:
           0.5

       Overrides:
           None.

       The decrementation factor (from 0 to 1), used to determine the new report counter after
       expiration of the delay.

       "loop_prevention_regex"

       Regular expression to prevent loop

       Default:
           "mailer-daemon|sympa|listserv|majordomo|smartlist|mailman"

       Overrides:
           Virtual domain

           List

       If the sender address matches the regular expression, then the message is rejected.

       "msgid_table_cleanup_ttl"

       Expiration period of message ID table

       Default:
           86400 (seconds)

       Overrides:
           None.

       Expiration period of entries in the table maintained by sympa_msg.pl daemon to prevent
       delivery of duplicate messages caused by loop.

       "msgid_table_cleanup_frequency"

       Cleanup interval of message ID table

       Default:
           3600 (seconds)

       Overrides:
           None.

       Interval between cleanups of the table maintained by sympa_msg.pl daemon to prevent
       delivery of duplicate messages caused by loop.

   Automatic lists
       "automatic_list_removal"

       Remove empty automatic list

       Default:
           "none"

       Overrides:
           Virtual domain

       If set to "if_empty", then Sympa will remove automatically created mailing lists just
       after their creation, if they contain no list member.

       Example:

         automatic_list_removal if_empty

       "automatic_list_feature"

       Automatic list

       Default:
           "off"

       Overrides:
           Virtual domain

       "automatic_list_creation"

       Who is able to create automatic list

       Default:
           "public"

       Overrides:
           Virtual domain

       Value of this parameter is name of "automatic_list_creation" scenario.

       "automatic_list_families"

       Definition of automatic list families

       Default:
           None.

       Overrides:
           Virtual domain

       Defines the families the automatic lists are based on. It is a character string structured
       as follows:

       * each family is separated from the other by a semicolon (;)

       * inside a family definition, each field is separated from the other by a colon (:)

       * each field has the structure: "<field name>=<field value>"

       Basically, each time Sympa uses the automatic lists families, the values defined in this
       parameter will be available in the family object.

       * for scenarios: [family->name]

       * for templates: [% family.name %]

       Example:

         automatic_list_families name=family_one:prefix=f1:display=My automatic lists:prefix_separator=+:classes separator=-:family_owners_list=alist@domain.tld;name=family_two:prefix=f2:display=My other automatic lists:prefix_separator=+:classes separator=-:family_owners_list=anotherlist@domain.tld;

       "parsed_family_files"

       Parsed files for families

       Default:
           "message.footer,message.header,message.footer.mime,message.header.mime,info"

       Overrides:
           Virtual domain

       comma-separated list of files that will be parsed by Sympa when instantiating a family (no
       space allowed in file names)

   Tag based spam filtering
       "antispam_feature"

       Tag based spam filtering

       Default:
           "off"

       Overrides:
           Virtual domain

       "antispam_tag_header_name"

       Header field to tag spams

       Default:
           "X-Spam-Status"

       Overrides:
           Virtual domain

       If a spam filter (like spamassassin or j-chkmail) add a header field to tag spams, name of
       this header field (example X-Spam-Status)

       "antispam_tag_header_spam_regexp"

       Regular expression to check header field to tag spams

       Default:
           "^\s*Yes"

       Overrides:
           Virtual domain

       Regular expression applied on this header to verify message is a spam (example Yes)

       "antispam_tag_header_ham_regexp"

       Regular expression to determine spam or ham.

       Default:
           "^\s*No"

       Overrides:
           Virtual domain

       Regular expression applied on this header field to verify message is NOT a spam (example
       No)

       "spam_status"

       Name of header field to inform

       Default:
           "x-spam-status"

       Overrides:
           Virtual domain

       Value of this parameter is name of "spam_status" scenario.

       Messages are supposed to be filtered by an spam filter that adds them one or more headers.
       This parameter is used to select a special scenario in order to decide the message's spam
       status: ham, spam or unsure. This parameter replaces antispam_tag_header_name,
       antispam_tag_header_spam_regexp and antispam_tag_header_ham_regexp.

   Directories
       "home"

       List home

       Default:
           $EXPLDIR

       Overrides:
           None.

       Base directory of list configurations.

       "etc"

       Directory for configuration files

       Default:
           $SYSCONFDIR

       Overrides:
           None.

       Base directory of global configuration (except "sympa.conf").

       "spool"

       Base directory of spools

       Default:
           $SPOOLDIR

       Overrides:
           None.

       Base directory of all spools which are created at runtime. This directory must be writable
       by Sympa user.

       "queue"

       Directory for message incoming spool

       Default:
           "$SPOOLDIR/msg"

       Overrides:
           None.

       This spool is used both by "queue" program and "sympa_msg.pl" daemon.

       "queuemod"

       Directory for moderation spool

       Default:
           "$SPOOLDIR/moderation"

       Overrides:
           None.

       "queuedigest"

       Directory for digest spool

       Default:
           "$SPOOLDIR/digest"

       Overrides:
           None.

       "queueauth"

       Directory for held message spool

       Default:
           "$SPOOLDIR/auth"

       Overrides:
           None.

       This parameter is named such by historical reason.

       "queueoutgoing"

       Directory for archive spool

       Default:
           "$SPOOLDIR/outgoing"

       Overrides:
           None.

       This parameter is named such by historical reason.

       "queuesubscribe"

       Directory for held request spool

       Default:
           "$SPOOLDIR/subscribe"

       Overrides:
           None.

       This parameter is named such by historical reason.

       "queuetopic"

       Directory for topic spool

       Default:
           "$SPOOLDIR/topic"

       Overrides:
           None.

       "queuebounce"

       Directory for bounce incoming spool

       Default:
           "$SPOOLDIR/bounce"

       Overrides:
           None.

       This spool is used both by "bouncequeue" program and "bounced.pl" daemon.

       "queuetask"

       Directory for task spool

       Default:
           "$SPOOLDIR/task"

       Overrides:
           None.

       "queueautomatic"

       Directory for automatic list creation spool

       Default:
           "$SPOOLDIR/automatic"

       Overrides:
           None.

       This spool is used both by "familyqueue" program and "sympa_automatic.pl" daemon.

       "queuebulk"

       Directory for message outgoing spool

       Default:
           "$SPOOLDIR/bulk"

       Overrides:
           None.

       This parameter is named such by historical reason.

       "tmpdir"

       Temporary directory used by external programs such as virus scanner. Also, outputs to
       daemons' standard error are redirected to the files under this directory.

       Default:
           "$SPOOLDIR/tmp"

       Overrides:
           None.

       "viewmail_dir"

       Directory to cache formatted messages

       Default:
           "$SPOOLDIR/viewmail"

       Overrides:
           None.

       Base directory path of directories where HTML view of messages are cached.

       "bounce_path"

       Directory for storing bounces

       Default:
           $BOUNCEDIR

       Overrides:
           None.

       The directory where bounced.pl daemon will store the last bouncing message for each user.
       A message is stored in the file: <bounce_path>/<list name>@<mail domain name>/<email
       address>, or, if tracking is enabled: <bounce_path>/<list name>@<mail domain name>/<email
       address>_<envelope ID>.

       Users can access to these messages using web interface in the bounce management page.

       Don't confuse with "queuebounce" parameter which defines the spool where incoming error
       reports are stored and picked by bounced.pl daemon.

       "arc_path"

       Directory for storing archives

       Default:
           $ARCDIR

       Overrides:
           Virtual domain

       Where to store HTML archives. This parameter is used by the "archived.pl" daemon. It is a
       good idea to install the archive outside the web document hierarchy to prevent overcoming
       of WWSympa's access control.

       "purge_spools_task"

       Task for cleaning spools

       Default:
           "daily"

       Overrides:
           None.

       This task cleans old content in spools.

       "clean_delay_queue"

       Max age of incoming bad messages

       Default:
           7 (days)

       Overrides:
           None.

       Number of days "bad" messages are kept in message incoming spool (as specified by "queue"
       parameter). Sympa keeps messages rejected for various reasons (badly formatted, looping
       etc.).

       "clean_delay_queueoutgoing"

       Max age of bad messages for archives

       Default:
           7 (days)

       Overrides:
           None.

       Number of days "bad" messages are kept in message archive spool (as specified by
       "queueoutgoing" parameter). Sympa keeps messages rejected for various reasons (unable to
       create archive directory, to copy file etc.).

       "clean_delay_queuebounce"

       Max age of bad bounce messages

       Default:
           7 (days)

       Overrides:
           None.

       Number of days "bad" messages are kept in bounce spool (as specified by "queuebounce"
       parameter). Sympa keeps messages rejected for various reasons (unknown original sender,
       unknown report type).

       "clean_delay_queuemod"

       Max age of moderated messages

       Default:
           30 (days)

       Overrides:
           List

       Number of days messages are kept in moderation spool (as specified by "queuemod"
       parameter). Beyond this deadline, messages that have not been processed are deleted.

       "clean_delay_queueauth"

       Max age of held messages

       Default:
           30 (days)

       Overrides:
           None.

       Number of days messages are kept in held message spool (as specified by "queueauth"
       parameter). Beyond this deadline, messages that have not been confirmed are deleted.

       "clean_delay_queuesubscribe"

       Max age of held requests

       Default:
           30 (days)

       Overrides:
           None.

       Number of days requests are kept in held request spool (as specified by "queuesubscribe"
       parameter). Beyond this deadline, requests that have not been validated nor declined are
       deleted.

       "clean_delay_queuetopic"

       Max age of tagged topics

       Default:
           30 (days)

       Overrides:
           None.

       Number of days (automatically or manually) tagged topics are kept in topic spool (as
       specified by "queuetopic" parameter). Beyond this deadline, tagging is forgotten.

       "clean_delay_queueautomatic"

       Max age of incoming bad messages in automatic list creation spool

       Default:
           10 (days)

       Overrides:
           None.

       Number of days "bad" messages are kept in automatic list creation spool (as specified by
       "queueautomatic" parameter). Sympa keeps messages rejected for various reasons (badly
       formatted, looping etc.).

       "clean_delay_queuebulk"

       Max age of outgoing bad messages

       Default:
           7 (days)

       Overrides:
           None.

       Number of days "bad" messages are kept in message outgoing spool (as specified by
       "queuebulk" parameter). Sympa keeps messages rejected for various reasons (failed
       personalization, bad configuration on MTA etc.).

       "clean_delay_queuedigest"

       Max age of bad messages in digest spool

       Default:
           14 (days)

       Overrides:
           None.

       Number of days "bad" messages are kept in digest spool (as specified by "queuedigest"
       parameter). Sympa keeps messages rejected for various reasons (syntax errors in
       "digest.tt2" template etc.).

       "clean_delay_tmpdir"

       Max age of temporary files

       Default:
           7 (days)

       Overrides:
           None.

       Number of days files in temporary directory (as specified by "tmpdir" parameter),
       including standard error logs, are kept.

   Miscellaneous
       "email"

       Local part of Sympa email address

       Default:
           "sympa"

       Overrides:
           Virtual domain

       Local part (the part preceding the "@" sign) of the address by which mail interface of
       Sympa accepts mail commands.

       If you change the default value, you must modify the mail aliases too.

       "listmaster_email"

       Local part of listmaster email address

       Default:
           "listmaster"

       Overrides:
           Virtual domain

       Local part (the part preceding the "@" sign) of the address by which listmasters receive
       messages.

       If you change the default value, you must modify the mail aliases too.

       "custom_robot_parameter"

       Custom robot parameter

       Default:
           None.

       Overrides:
           Virtual domain

       Used to define a custom parameter for your server. Do not forget the semicolon between the
       parameter name and the parameter value.

       You will be able to access the custom parameter value in web templates by variable
       "conf.custom_robot_parameter.<param_name>"

       Example:

         custom_robot_parameter param_name ; param_value

       "cache_list_config"

       Use of binary cache of list configuration

       Default:
           "none"

       Overrides:
           None.

       binary_file: Sympa processes will maintain a binary version of the list configuration,
       "config.bin" file on local disk. If you manage a big amount of lists (1000+), it should
       make the web interface startup faster.

       You can recreate cache by running "sympa.pl --reload_list_config".

       "db_list_cache"

       Use database cache to search lists

       Default:
           "off"

       Overrides:
           None.

       Note that "list_table" database table should be filled at the first time by running:

         # sympa.pl --sync_list_db

       "purge_user_table_task"

       Task for expiring inactive users

       Default:
           "monthly"

       Overrides:
           None.

       This task removes rows in the "user_table" table which have not corresponding entries in
       the "subscriber_table" table.

       "purge_logs_table_task"

       Task for cleaning tables

       Default:
           "daily"

       Overrides:
           None.

       This task cleans old logs from "logs_table" table.

       "logs_expiration_period"

       Max age of logs in database

       Default:
           3 (months)

       Overrides:
           None.

       Number of months that elapse before a log is expired

       "stats_expiration_period"

       Max age of statistics information in database

       Default:
           3 (months)

       Overrides:
           None.

       Number of months that elapse before statistics information are expired

       "umask"

       Umask

       Default:
           027

       Overrides:
           None.

       Default mask for file creation (see umask(2)). Note that it will be interpreted as an
       octal value.

       "cookie"

       Secret string for generating unique keys

       Default:
           None.

       Overrides:
           List

       This allows generated authentication keys to differ from a site to another. It is also
       used for encryption of user passwords stored in the database. The presence of this string
       is one reason why access to "sympa.conf" needs to be restricted to the "sympa" user.

       Note that changing this parameter will break all HTTP cookies stored in users' browsers,
       as well as all user passwords and lists X509 private keys. To prevent a catastrophe, Sympa
       refuses to start if this "cookie" parameter was changed.

       Example:

         cookie 123456789

   Web interface parameters
       "wwsympa_url"

       URL prefix of web interface

       Default:
           None.

       Overrides:
           Virtual domain

       This is used to construct URLs of web interface.

       Example:

         wwsympa_url https://web.example.org/sympa

       "http_host"

       URL prefix of WWSympa behind proxy

       Default:
           None.

       Overrides:
           Virtual domain

       "static_content_url"

       URL for static contents

       Default:
           "/static-sympa"

       Overrides:
           Virtual domain

       HTTP server have to map it with "static_content_path" directory.

       "static_content_path"

       Directory for static contents

       Default:
           $STATICDIR

       Overrides:
           Virtual domain

       "log_facility"

       System log facility for web interface

       Default:
           "LOCAL1"

       Overrides:
           None.

       System log facility for WWSympa, archived.pl and bounced.pl. Default is to use value of
       "syslog" parameter.

   Web interface parameters: Appearances
       "logo_html_definition"

       Custom logo

       Default:
           None.

       Overrides:
           Virtual domain

       HTML fragment to insert a logo in the page of web interface.

       Example:

         logo_html_definition <a href="http://www.example.com"><img style="float: left; margin-top: 7px; margin-left: 37px;" src="http://www.example.com/logos/mylogo.jpg" alt="My Company" /></a>

       "favicon_url"

       Custom favicon

       Default:
           None.

       Overrides:
           Virtual domain

       URL of favicon image

       "css_path"

       Directory for static style sheets (CSS)

       Default:
           $CSSDIR

       Overrides:
           None.

       After an upgrade, static CSS files are upgraded with the newly installed "css.tt2"
       template. Therefore, this is not a good place to store customized CSS files.

       "css_url"

       URL for style sheets (CSS)

       Default:
           "/static-sympa/css"

       Overrides:
           None.

       To use auto-generated static CSS, HTTP server have to map it with "css_path".

       "pictures_path"

       Directory for subscribers pictures

       Default:
           $PICTURESDIR

       Overrides:
           None.

       "pictures_url"

       URL for subscribers pictures

       Default:
           "/static-sympa/pictures"

       Overrides:
           None.

       HTTP server have to map it with "pictures_path" directory.

       "color_0", ..., "color_15"

       Colors for web interface

       Default:
           See description on web interface.

       Overrides:
           Virtual domain

       Colors are used in style sheet (CSS). They may be changed using web interface by
       listmasters.

       "dark_color", "light_color", "text_color", "bg_color", "error_color", "selected_color",
       "shaded_color"

       Colors for web interface, obsoleted

       Default:
           See description on web interface.

       Overrides:
           Virtual domain

       "default_home"

       Type of main web page

       Default:
           "home"

       Overrides:
           Virtual domain

       "lists" for the page of list of lists. "home" for home page.

       "archive_default_index"

       Default index organization of web archive

       Default:
           "thrd"

       Overrides:
           None.

       thrd: Threaded index.

       mail: Chronological index.

       "review_page_size"

       Size of review page

       Default:
           25

       Overrides:
           Virtual domain

       Default number of lines of the array displaying users in the review page

       "viewlogs_page_size"

       Size of viewlogs page

       Default:
           25

       Overrides:
           Virtual domain

       Default number of lines of the array displaying the log entries in the logs page.

       "main_menu_custom_button_1_title", ... "main_menu_custom_button_3_title",
       "main_menu_custom_button_1_url", ... "main_menu_custom_button_3_url",
       "main_menu_custom_button_1_target", ... "main_menu_custom_button_3_target"

       Custom menus

       Default:
           None.

       Overrides:
           Virtual domain

       You may modify the main menu content by editing the menu.tt2 file, but you can also edit
       these parameters in order to add up to 3 buttons. Each button is defined by a title (the
       text in the button), an URL and, optionally, a target.

       Example:

         main_menu_custom_button_1_title FAQ
         main_menu_custom_button_1_url http://www.renater.fr/faq/universalistes/index
         main_menu_custom_button_1_target Help

   Web interface parameters: Miscellaneous
       "cookie_domain"

       HTTP cookies validity domain

       Default:
           "localhost"

       Overrides:
           Virtual domain

       If beginning with a dot ("."), the cookie is available within the specified Internet
       domain. Otherwise, for the specified host. The only reason for replacing the default value
       would be where WWSympa's authentication process is shared with an application running on
       another host.

       Example:

         cookie_domain .renater.fr

       "cookie_expire"

       HTTP cookies lifetime

       Default:
           0

       Overrides:
           None.

       This is the default value when not set explicitly by users. "0" means the cookie may be
       retained during browser sessions.

       "cookie_refresh"

       Average interval to refresh HTTP session ID.

       Default:
           60

       Overrides:
           None.

       "purge_session_table_task"

       Task for cleaning old sessions

       Default:
           "daily"

       Overrides:
           None.

       This task removes old entries in the "session_table" table.

       "session_table_ttl"

       Max age of sessions

       Default:
           "2d"

       Overrides:
           None.

       Session duration is controlled by "sympa_session" cookie validity attribute. However, by
       security reason, this delay also need to be controlled by server side. This task removes
       old entries in the "session_table" table.

       Format of values is a string without spaces including "y" for years, "m" for months, "d"
       for days, "h" for hours, "min" for minutes and "sec" for seconds.

       "anonymous_session_table_ttl"

       Default:
           "1h"

       Overrides:
           None.

       "default_shared_quota"

       Default disk quota for shared repository

       Default:
           None (Kbytes).

       Overrides:
           Virtual domain

           List ("shared_doc.quota")

       "use_html_editor"

       Use HTML editor

       Default:
           0

       Overrides:
           Virtual domain

       If set to "on", users will be able to post messages in HTML using a javascript WYSIWYG
       editor.

       Example:

         use_html_editor on

       "html_editor_url"

       URL of HTML editor

       Default:
           None.

       Overrides:
           Virtual domain

       URL path to the javascript file making the WYSIWYG HTML editor available.  Relative path
       under <static_content_url> or absolute path.

       Example is for TinyMCE 4 installed under <static_content_path>/js/tinymce/.

       Example:

         html_editor_url js/tinymce/tinymce.min.js

       "html_editor_init"

       HTML editor initialization

       Default:
           None.

       Overrides:
           Virtual domain

       Javascript excerpt that enables and configures the WYSIWYG HTML editor.

       Example:

         html_editor_init tinymce.init({selector:"#body",language:lang.split(/[^a-zA-Z]+/).join("_")});

       "max_wrong_password"

       Count limit of wrong password submission

       Default:
           19

       Overrides:
           Virtual domain

       If this limit is reached, the account is locked until the user renews their password. The
       default value is chosen in order to block bots trying to log in using brute force
       strategy. This value should never be reached by real users that will probably uses the
       renew password service before they performs so many tries.

       "password_case"

       Password case

       Default:
           "insensitive"

       Overrides:
           None.

       "insensitive" or "sensitive".

       If set to "insensitive", WWSympa's password check will be insensitive. This only concerns
       passwords stored in the Sympa database, not the ones in LDAP.

       Should not be changed! May invalid all user password.

       "password_hash"

       Password hashing algorithm

       Default:
           "md5"

       Overrides:
           None.

       "md5" or "bcrypt".

       If set to "md5", Sympa will use MD5 password hashes. If set to "bcrypt", bcrypt hashes
       will be used instead. This only concerns passwords stored in the Sympa database, not the
       ones in LDAP.

       Should not be changed! May invalid all user passwords.

       "password_hash_update"

       Update password hashing algorithm when users log in

       Default:
           1

       Overrides:
           None.

       On successful login, update the encrypted user password to use the algorithm specified by
       "password_hash". This allows for a graceful transition to a new password hash algorithm. A
       value of 0 disables updating of existing password hashes.  New and reset passwords will
       use the "password_hash" setting in all cases.

       "bcrypt_cost"

       Bcrypt hash cost

       Default:
           12

       Overrides:
           None.

       When "password_hash" is set to "bcrypt", this sets the "cost" parameter of the bcrypt hash
       function. The default of 12 is expected to require approximately 250ms to calculate the
       password hash on a 3.2GHz CPU. This only concerns passwords stored in the Sympa database,
       not the ones in LDAP.

       Can be changed but any new cost setting will only apply to new passwords.

       "one_time_ticket_lifetime"

       Age of one time ticket

       Default:
           "2d"

       Overrides:
           None.

       Duration before the one time tickets are expired

       "one_time_ticket_lockout"

       Restrict access to one time ticket

       Default:
           "one_time"

       Overrides:
           Virtual domain

       Is access to the one time ticket restricted, if any users previously accessed? (one_time |
       remote_addr | open)

       "purge_one_time_ticket_table_task"

       Default:
           "daily"

       Overrides:
           None.

       "one_time_ticket_table_ttl"

       Default:
           "10d"

       Overrides:
           None.

       "pictures_feature"

       Pictures

       Default:
           "on"

       Overrides:
           Virtual domain

           List

       Enables or disables the pictures feature by default.  If enabled, subscribers can upload
       their picture (from the "Subscriber option" page) to use as an avatar.

       Pictures are stored in a directory specified by the "static_content_path" parameter.

       "pictures_max_size"

       The maximum size of uploaded picture

       Default:
           102400 (bytes)

       Overrides:
           Virtual domain

       "spam_protection"

       Protect web interface against spam harvesters

       Default:
           "javascript"

       Overrides:
           Virtual domain

       These values are supported:

       javascript: the address is hidden using a javascript. Users who enable Javascript can see
       nice mailto addresses where others have nothing.

       at: the "@" character is replaced by the string "AT".

       none: no protection against spam harvesters.

       "web_archive_spam_protection"

       Protect web archive against spam harvesters

       Default:
           "cookie"

       Overrides:
           Virtual domain

           List

       The same as "spam_protection", but restricted to the web archive.

       In addition to it:

       cookie: users must submit a small form in order to receive a cookie before browsing the
       web archive.

       "reporting_spam_script_path"

       Script to report spam

       Default:
           None.

       Overrides:
           Virtual domain

       If set, when a list moderator report undetected spams for list moderation, this external
       script is invoked and the message is injected into standard input of the script.

   S/MIME and TLS
       S/MIME authentication, decryption and re-encryption. It requires these external modules:
       Crypt-OpenSSL-X509 and Crypt-SMIME.

       TLS client authentication. It requires an external module: IO-Socket-SSL.

       "cafile"

       File containing trusted CA certificates

       Default:
           None.

       Overrides:
           None.

       This can be used alternatively and/or additionally to "capath".

       "capath"

       Directory containing trusted CA certificates

       Default:
           None.

       Overrides:
           None.

       CA certificates in this directory are used for client authentication.

       The certificates need to have names including hash of subject, or symbolic links to them
       with such names. The links may be created by using "c_rehash" script bundled in OpenSSL.

       "key_passwd"

       Password used to crypt lists private keys

       Default:
           None.

       Overrides:
           None.

       If not defined, Sympa assumes that list private keys are not encrypted.

       Example:

         key_passwd your_password

       "ssl_cert_dir"

       Directory containing user certificates

       Default:
           "$EXPLDIR/X509-user-certs"

       Overrides:
           None.

   Data sources setup
       Including subscribers, owners and moderators from data sources. Appropriate database
       driver (DBD) modules are required: DBD-CSV, DBD-mysql, DBD-ODBC, DBD-Oracle, DBD-Pg, DBD-
       SQLite and/or Net-LDAP. And also, if secure connection (LDAPS) to LDAP server is required:
       IO-Socket-SSL.

       "default_sql_fetch_timeout"

       Default of SQL fetch timeout

       Default:
           300

       Overrides:
           List ("sql_fetch_timeout")

       Default timeout while performing a fetch with include_sql_query.

       "default_ttl"

       Default of inclusion timeout

       Default:
           3600

       Overrides:
           List ("ttl")

       Default timeout between two scheduled synchronizations of list members with data sources.

   DKIM and ARC
       DKIM signature verification and re-signing. It requires an external module: Mail-DKIM.

       ARC seals on forwarded messages. It requires an external module: Mail-DKIM.

       "dkim_feature"

       Enable DKIM

       Default:
           "off"

       Overrides:
           Virtual domain

           List

       If set to "on", Sympa may verify DKIM signatures of incoming messages and/or insert DKIM
       signature to outgoing messages.

       "dkim_add_signature_to"

       Which service messages to be signed

       Default:
           "robot,list"

       Overrides:
           Virtual domain

       Inserts a DKIM signature to service messages in context of robot, list or both

       "dkim_private_key_path"

       File path for DKIM private key

       Default:
           None.

       Overrides:
           Virtual domain

           List ("dkim_parameters.private_key_path")

       The file must contain a PEM encoded private key

       "dkim_signature_apply_on"

       Which messages delivered via lists to be signed

       Default:
           "md5_authenticated_messages,smime_authenticated_messages,dkim_authenticated_messages,editor_validated_messages"

       Overrides:
           Virtual domain

           List

       Type of message that is added a DKIM signature before distribution to subscribers.
       Possible values are "none", "any" or a list of the following keywords:
       "md5_authenticated_messages", "smime_authenticated_messages",
       "dkim_authenticated_messages", "editor_validated_messages".

       "dkim_signer_domain"

       The "d=" tag as defined in rfc 4871

       Default:
           None.

       Overrides:
           Virtual domain

           List ("dkim_parameters.signer_domain")

       The DKIM "d=" tag is the domain of the signing entity. The virtual host domain name is
       used as its default value

       "dkim_signer_identity"

       The "i=" tag as defined in rfc 4871

       Default:
           None.

       Overrides:
           Virtual domain

       Default is null.

       "dkim_selector"

       Selector for DNS lookup of DKIM public key

       Default:
           None.

       Overrides:
           Virtual domain

           List ("dkim_parameters.selector")

       The selector is used in order to build the DNS query for public key. It is up to you to
       choose the value you want but verify that you can query the public DKIM key for
       "<selector>._domainkey.your_domain"

       "arc_feature"

       Enable ARC

       Default:
           "off"

       Overrides:
           Virtual domain

           List

       If set to "on", Sympa may add ARC seals to outgoing messages.

       "arc_srvid"

       SRV ID for Authentication-Results used in ARC seal

       Default:
           None.

       Overrides:
           Virtual domain

       Typically the domain of the mail server

       "arc_signer_domain"

       The "d=" tag as defined in ARC

       Default:
           None.

       Overrides:
           Virtual domain

           List ("arc_parameters.arc_signer_domain")

       The ARC "d=" tag is the domain of the signing entity. The DKIM d= domain name is used as
       its default value

       "arc_selector"

       Selector for DNS lookup of ARC public key

       Default:
           None.

       Overrides:
           Virtual domain

           List ("arc_parameters.arc_selector")

       The selector is used in order to build the DNS query for public key. It is up to you to
       choose the value you want but verify that you can query the public DKIM key for
       "<selector>._domainkey.your_domain". Default is the same selector as for DKIM signatures

       "arc_private_key_path"

       File path for ARC private key

       Default:
           None.

       Overrides:
           Virtual domain

           List ("arc_parameters.arc_private_key_path")

       The file must contain a PEM encoded private key. Defaults to same file as DKIM private key

   DMARC protection
       Processes originator addresses to avoid some domains' excessive DMARC protection. This
       feature requires an external module: Net-DNS.

       "dmarc_protection_mode"

       Test mode(s) for DMARC Protection

       Default:
           None.

       Overrides:
           Virtual domain

           List ("dmarc_protection.mode")

       Do not set unless you want to use DMARC protection.

       This is a comma separated list of test modes; if multiple are selected then protection is
       activated if ANY match.  Do not use dmarc_* modes unless you have a local DNS cache as
       they do a DNS lookup for each received message.

       Example:

         dmarc_protection_mode dmarc_reject,dkim_signature

       "dmarc_protection_domain_regex"

       Regular expression for domain name match

       Default:
           None.

       Overrides:
           Virtual domain

           List ("dmarc_protection.domain_regex")

       This is used for the "domain_regex" protection mode.

       "dmarc_protection_phrase"

       New From name format

       Default:
           "name_via_list"

       Overrides:
           Virtual domain

           List ("dmarc_protection.phrase")

       This is the format to be used for the sender name part of the new From header field.

       "dmarc_protection_other_email"

       New From address

       Default:
           None.

       Overrides:
           Virtual domain

           List ("dmarc_protection.other_email")

   List address verification
       Checks if an alias with the same name as the list to be created already exists on the SMTP
       server. This feature requires an external module: Net-SMTP.

       "list_check_helo"

       SMTP HELO (EHLO) parameter used for address verification

       Default:
           None.

       Overrides:
           Virtual domain

       Default value is the host part of "list_check_smtp" parameter.

       "list_check_smtp"

       SMTP server to verify existence of the same addresses as the list to be created

       Default:
           None.

       Overrides:
           Virtual domain

       This is needed if you are running Sympa on a host but you handle all your mail on a
       separate mail relay.

       Default value is real FQDN of the host. Port number may be specified as
       "mail.example.org:25" or "203.0.113.1:25".  If port is not specified, standard port (25)
       will be used.

       "list_check_suffixes"

       Address suffixes to verify

       Default:
           "request,owner,editor,unsubscribe,subscribe"

       Overrides:
           Virtual domain

       List of suffixes you are using for list addresses, i.e. "mylist-request", "mylist-owner"
       and so on.

       This parameter is used with the "list_check_smtp" parameter. It is also used to check list
       names at list creation time.

   Antivirus plug-in
       "antivirus_path"

       Path to the antivirus scanner engine

       Default:
           None.

       Overrides:
           Virtual domain

       Supported antivirus: Clam AntiVirus/clamscan & clamdscan, McAfee/uvscan, Fsecure/fsav,
       Sophos, AVP and Trend Micro/VirusWall

       Example:

         antivirus_path /usr/local/bin/clamscan

       "antivirus_args"

       Antivirus plugin command line arguments

       Default:
           None.

       Overrides:
           Virtual domain

       Example:

         antivirus_args --no-summary --database /usr/local/share/clamav

       "antivirus_notify"

       Notify sender if virus checker detects malicious content

       Default:
           "sender"

       Overrides:
           Virtual domain

       "sender" to notify originator of the message, "delivery_status" to send delivery status,
       or "none"

   Password validation
       Checks if the password the user submitted has sufficient strength. This feature requires
       an external module: Data-Password.

       "password_validation"

       Password validation

       Default:
           None.

       Overrides:
           None.

       The password validation techniques to be used against user passwords that are added to
       mailing lists. Options come from Data::Password
       (http://search.cpan.org/~razinf/Data-Password-1.07/Password.pm#VARIABLES)

       Example:

         password_validation MINLEN=8,GROUPS=3,DICTIONARY=4,DICTIONARIES=/pentest/dictionaries

   Authentication with LDAP
       Authenticates users based on the directory on LDAP server. This feature requires an
       external module: Net-LDAP. And also, if secure connection (LDAPS) is required: IO-Socket-
       SSL.

       "ldap_force_canonical_email"

       Use canonical email address for LDAP authentication

       Default:
           1

       Overrides:
           Virtual domain

       When using LDAP authentication, if the identifier provided by the user was a valid email,
       if this parameter is set to false, then the provided email will be used to authenticate
       the user. Otherwise, use of the first email returned by the LDAP server will be used.

   SOAP HTTP interface
       Provides some functions of Sympa through the SOAP HTTP interface. This feature requires an
       external module: SOAP-Lite.

       "soap_url"

       URL of SympaSOAP

       Default:
           None.

       Overrides:
           Virtual domain

       WSDL document of SympaSOAP refers to this URL in its service section.

       Example:

         soap_url http://web.example.org/sympasoap

       "soap_url_local"

       URL of SympaSOAP behind proxy

       Default:
           None.

       Overrides:
           Virtual domain

   Obsoleted parameters
       "host"

       Default:
           None.

       Overrides:
           Virtual domain

       "log_condition"

       Default:
           None.

       Overrides:
           Virtual domain

       "log_module"

       Default:
           None.

       Overrides:
           Virtual domain

       "filesystem_encoding"

       Default:
           "utf-8"

       Overrides:
           None.

       "automatic_list_prefix"

       Defines the prefix allowing to recognize that a list is an automatic list.

       Default:
           None.

       Overrides:
           None.

       "default_distribution_ttl"

       Default timeout between two action-triggered synchronizations of list members with data
       sources.

       Default:
           300

       Overrides:
           None.

       "voot_feature"

       Default:
           "off"

       Overrides:
           None.

       "edit_list"

       Default:
           "owner"

       Overrides:
           None.

       "use_fast_cgi"

       Enable FastCGI

       Default:
           1

       Overrides:
           None.

       Is FastCGI module for HTTP server installed? This module provides a much faster web
       interface.

       "htmlarea_url"

       Default:
           None.

       Overrides:
           None.

       "show_report_abuse"

       Add a "Report abuse" link in the side menu of the lists (0|1)

       Default:
           0

       Overrides:
           None.

       The link is a mailto link, you can change that by overriding web_tt2/report_abuse.tt2

FILES

       /etc/sympa/sympa/sympa.conf
           Sympa main configuration file.

       $SYSCONFDIR/<robot name>/robot.conf
           Configuration specific to each virtual domain.

       $EXPLDIR/<list name>/config or $EXPLDIR/<robot name>/<list name>/config
           Configuration specific to each list.

SEE ALSO

       Sympa Administration Manual.  <https://sympa-community.github.io/manual/>.