Provided by: amanda-common_3.5.1-2ubuntu0.4_amd64 bug

NAME

       amanda-auth - Communication/Authentication methods between Amanda server and client

DESCRIPTION

       Amanda offers 8 methods of communication between Amanda server (sometimes also called the
       tape server) and clients, each with its own authentication method. The desired
       communication method is specified by the auth parameter in the amanda.conf file
       (amanda.conf(5)) commonly as a dumptype. Valid values to the auth parameter are bsd,
       bsdudp, bsdtcp, krb5, local, rsh, and ssh. The authentication and communication method is
       used during the backup process amdump (amdump(8)) as well as the recovery process
       amrecover (amrecover(8)).

COMPILATION AND GENERAL INFORMATION

       The communication method and thus type of authentication that will be used by the Amanda
       server is specified by the auth parameter in the dumptype for each disklist entry (DLE).
       The auth parameter thus may be easily and globally specified in the "global" dumptype. If
       auth is not specified, the bsdtcp communication method is used. See amanda.conf(5) for
       more information on Amanda configuration and dumptypes, and disklist(5) for more
       information on disklists.

       On the client side, the Amanda daemon amandad validates the connection depending on the
       value of the auth argument passed to it (see Amanda(8)). Also, when it comes to recovery,
       the auth parameter can be specified in the amanda-client.conf(5) file to specify the
       communication method to be used by the client to the server.

       When Amanda is being built from source code, desired communication and thus authentication
       methods (shown as "Authentication") must be specified as configure options at compilation
       time.

       Authentication   Configure option(s)
        bsd           --with-bsd-security      --with-amandahosts (pre-2.6)
        bsdtcp        --with-bsdtcp-security   --with-amandahosts (pre-2.6)
        bsdudp        --with-bsdudp-security   --with-amandahosts (pre-2.6)
        krb5          --with-krb5-security
        local          (always included)
        rsh           --with-rsh-security
        ssh           --with-ssh-security
        ssl           --with-ssl-security

       There are additional configure options for bsd, bsdudp, and bsdtcp to allow for specifying
       explicit UDP and TCP port ranges.

          --with-udpportrange
          --with-tcpportrange
          --with-low-tcpportrange

       See PORT USAGE below for more information.

       There are additional configure options for Kerberos 5 if you so desire.

          --with-krb5-security=DIR       where libkrb.a lives   [see below]

       If configuring with --with-krb5-security, the configure script will search under
       /usr/kerberos/lib, /usr/cygnus/lib, /usr/lib, and /opt/kerberos/lib for the kerberos bits,
       libkrb.a, in this order. Kerberos support will not be added if it does not find them. If
       the kerberos bits are found under some other hierarchy, you can specify this via
       --with-krb5-security=DIR where DIR is where the kerberos bits live. The configure script
       will then look in the 'lib' directory under this hierarchy for libkrb.a.

       The auth parameter selects a communication/authentication method to use between the client
       and the backup server. These methods are described each in their own section below.

   Usernames
       When Amanda is built, a username is specified with the --with-user option. Most Amanda
       processes run under this user's identity, to minimize security risks. In binary
       distributions, this username is usually one of 'amanda', 'backup', or 'backup'. The
       examples below use 'backup' since it is unambiguous. You may need to adjust accordingly
       for your system.

   Authenticated Peer Hostnames
       Amanda's authentication mechanisms provide an authenticated hostname of the system on the
       other end of the connection, which is used to restrict access to only particular hosts.
       The degree of "authentication" performed on this hostname varies with the authentication
       mechanism, and is discussed below.

BSD, BSDUDP, AND BSDTCP COMMUNICATION AND AUTHENTICATION

       For additional information including example configurations, see
       http://wiki.zmanda.com/index.php/Configuring_bsd/bsdudp/bsdtcp_authentication.

       The bsd, bsdudp, and bsdtcp communication methods use either UDP, TCP, or both protocols
       operating as a network service to authenticate and exchange data between server and
       clients.

       The authentication proceeds as follows: for a new, incoming connection, Amanda verifies
       that the source port is in the reserved range (less than 1024), which for UNIX hosts
       suggests that the remote user has root privileges. Amanda then verifies that the reverse
       DNS for the remote address matches the forward DNS; that is, that the address maps to a
       hostname which maps back to the same address. Finally, the remote system must provide a
       username that matches the username in .amandahosts.

       In addition to compilation and general configuration (see COMPILATION AND GENERAL
       INFORMATION above), the authentication method that the client is configured to receive is
       specified by the auth parameter in the network service configuration for Amanda. The
       authentication method used by an Amanda client to reach the server during recovery is the
       authentication method specified by the auth parameter in the client's Amanda network
       service configuration or in its amanda-client.conf file (see amanda-client.conf(5)).

       By default, Amanda use the "amanda" service name and associated port set in /etc/services.
       It can be changed by setting the dumptype client-port option to a different port number or
       a different service name. All examples are for the service name "amanda" that uses the
       default port 10080.

   .amandahosts file
       Servers and clients using the bsd, bsdudp, and bsdtcp authentication methods refer to the
       .amandahosts file to control access. Amanda should be compiled for this access control if
       one of these methods will be used and is the default compilation option for Amanda 2.6
       (use --with-amandahosts when compiling pre-2.6 versions of Amanda).

       Amanda looks for the .amandahosts file in the Amanda user's home directory, commonly
       /var/lib/amanda.

       Each authorization is on its own line in the following format

       hostname [ username [ service...  ] ]

       If username is omitted, it defaults to the user running amandad, i.e. the user listed in
       the inetd or xinetd configuration file.

       service...  is a space-delimited list of services the client is authorized to execute:
       noop, selfcheck, sendsize, sendbackup, amdump (a shortcut for the previous four services
       which are required on clients), amindexd, and amidxtaped. The last two services are
       required on a server for clients to connect to it using amrecover.

       If service is omitted, it defaults to noop selfcheck sendsize sendbackup (which is
       equivalent to amdump).

       Example of the .amandahosts file on an Amanda client, where 'backup' is the Amanda
       dumpuser.

           amandaserver.example.com   backup   amdump

       Example of the .amandahosts file on an Amanda server

           amandaclient1.example.com   root   amindexd amidxtaped

   bsd communication and authentication
       The authentication is done using .amandahosts file in the Amanda user's home directory.
       The protocol between Amanda server and client is UDP. The number of disk list entries
       (DLEs)--number of Amanda clients--is limited by the UDP packet size. This authentication
       protocol will use a different port for each data stream (see PORT USAGE below)

   bsdudp communication and authentication
       The authentication is done using .amandahosts files in the Amanda user's home directory.
       It uses UDP protocol between Amanda server and client for data and hence the number of
       DLEs is limited by the UDP packet size. It uses one TCP port to establish the connection
       and multiplexes all data streams using one port on the server (see PORT USAGE below).

   bsdtcp communication and authentication
       The authentication is done using .amandahosts files in the backup user's (for example:
       backup) home directory. It uses TCP protocol between Amanda server and client. On the
       client, two reserved ports are used. On the server, all data streams are multiplexed to
       one port (see PORT USAGE below).

   USING INETD SERVER
       Template for Amanda client inetd service entry

          service_name socket_type protocol wait/nowait amanda_backup_user absolute_path_to_amandad amandad server_args

       Client example of using bsd authorization for inetd server given Amanda user is "backup":

          amanda dgram udp wait backup /path/to/amandad amandad -auth=bsd amdump

       The same could be used for bsdudp if specifying -auth=bsdudp instead of -auth=bsd.

       Client example of using bsdtcp authorization for inetd server given Amanda user is
       "backup":

          amanda stream tcp nowait backup /path/to/amandad amandad -auth=bsdtcp amdump

       amindexd and amidxtaped would typically be added at the end of the line as amandad server
       arguments for an Amanda server.

       Server example of using bsdtcp authorization for inetd server given Amanda user is
       "backup":

          amanda stream tcp nowait backup /path/to/amandad amandad -auth=bsdtcp amdump amindexd amidxtaped

       For Amanda version 2.5.0 and earlier, remember that neither bsdudp nor bsdtcp are
       supported and the Amanda daemon amandad accepts no arguments. Because of the latter,
       amrecover as of Amanda version 2.5.1 is not compatible with 2.5.0 and earlier servers.
       Thus, servers that are 2.5.0 or earlier must, in addition to the amanda service, run
       amindexd and amidxtaped Amanda services as their own network services, amandaidx and
       amidxtape, respectively (see below).

       There are no compatibility issues if server and clients are all 2.5.0 or earlier. If your
       server is 2.5.1 or later, you can still have clients that are 2.5.0 and earlier although
       you must then use bsd communication/authentication with these clients and must also run
       amindexd and amidxtaped Amanda services on the server as their own network services,
       amandaidx and amidxtape, respectively (see below). If you have a server that is 2.5.0 and
       earlier, clients of a later version on which you wish to run amrecover must use
       amoldrecover instead and, again, the server must be running the amandaidx and amidxtape
       network services.

       Example of amindexd and amidxtaped Amanda daemon services configured as their own network
       services for a 2.5.0 or earlier server or a newer server having 2.5.0 or earlier clients

          amandaidx stream tcp nowait backup /usr/local/libexec/amanda/current/amindexd   amindexd
          amidxtape stream tcp nowait backup /usr/local/libexec/amanda/current/amidxtaped amidxtaped

   USING XINETD SERVER
       Template for Amanda client xinetd service file

       service amanda
       {
            only_from               = Amanda server
            socket_type             = socket type
            protocol                = protocol
            wait                    = yes/no
            user                    = amanda backup user
            group                   = amanda backup user group id
            groups                  = yes
            server                  = absolute path to amandad
            server_args             = amandad server arguments
            disable                 = no
       }

       The only_from parameter can be used with xinetd but is usually in addition to the primary
       form of access control via the .amandahosts file.

       Client example of using bsd authorization for xinetd server and for Amanda user "backup":

       service amanda
       {
            only_from       = amandaserver.example.com
            socket_type     = dgram
            protocol        = udp
            wait            = yes
            user            = backup
            group           = disk
            groups          = yes
            server          = /path/to/amandad
            server_args     = -auth=bsd amdump
            disable         = no
       }

       The same could be used for bsdudp if specifying -auth=bsdudp instead of -auth=bsd.

       Client example of using bsdtcp authorization for xinetd server and for Amanda user
       "backup":

       service amanda
       {
            only_from       = amandaserver.example.com amandaclient.example.com
            socket_type     = stream
            protocol        = tcp
            wait            = no
            user            = backup
            group           = disk
            groups          = yes
            server          = /path/to/amandad
            server_args     = -auth=bsdtcp amdump
            disable         = no
       }

       amindexd and amidxtaped would typically be added as additional amandadserver_args for an
       Amanda server.

       For Amanda version 2.5.0 and earlier, remember that neither bsdudp nor bsdtcp are
       supported and the Amanda daemon amandad accepts no arguments. Because of the latter,
       amrecover as of Amanda version 2.5.1 is not compatible with 2.5.0 and earlier servers.
       Thus, servers that are 2.5.0 or earlier must, in addition to the amanda service, run
       amindexd and amidxtaped Amanda services as their own network services, amandaidx and
       amidxtape, respectively (see below).

       There are no compatibility issues if server and clients are all 2.5.0 or earlier. If your
       server is 2.5.1 or later, you can still have clients that are 2.5.0 and earlier although
       you must then use bsd communication/authentication with these clients and must also run
       amindexd and amidxtaped Amanda services on the server as their own network services,
       amandaidx and amidxtape, respectively (see below). If you have a server that is 2.5.0 and
       earlier, clients of a later version on which you wish to run amrecover must use
       amoldrecover instead and, again, the server must be running the amandaidx and amidxtape
       network services.

       Example of amindexd and amidxtaped Amanda daemon services configured as their own network
       services for a 2.5.0 or earlier server or a newer server having 2.5.0 or earlier clients

       service amandaidx
       {
            socket_type         = stream
            protocol       = tcp
            wait           = no
            user           = amanda
            group               = disk
            server              = /usr/local/libexec/amanda/amindexd
            disable             = no
       }

       service amidxtape
       {
            socket_type         = stream
            protocol       = tcp
            wait           = no
            user           = amanda
            group               = disk
            server              = /usr/local/libexec/amanda/amidxtaped
            disable             = no
       }

   PORT USAGE
       List of TCP/UDP ports used by network service communication methods for Amanda server and
       client.

          Key:
              UP = Unreserved Port
           RPpAP = Reserved Port per Amanda Process
          UPpDLE = Unreserved Port per DLE
            [..] = Configure options that can be used at compile time to define port ranges

       Authentication Protocol  Amanda server                      Amanda client
       bsd            udp       1 RPpAP [--with-udpportrange]      10080
                      tcp       1 UP [--with-tcpportrange]         3 UPpDLE [--with-tcpportrange]
       bsdudp         udp       1 RPpAP [--with-udpportrange]      10080
                      tcp       1 UP [-with-tcpportrange]          1 UPpDLE [--with-tcpportrange]
       bsdtcp         tcp       1 RPpAP [--with-low-tcpportrange]  10080

       Amanda server also uses two ports (dumper process) to communicate with the chunker/taper
       processes. These ports are in the range set by --with-tcpportrange.

       You can override the default port ranges that Amanda was compiled with in each
       configuration using the reserved-udp-port, reserved-tcp-port, and unreserved-tcp-port
       parameters in amanda.conf and amanda-client.conf configuration files (see amanda.conf(5)
       and amanda-client.conf(5)).

   Authenticated Peer Hostnames with BSD Authentications
       The BSD authentication mechanisms only verify that the remote host's DNS is configured
       correctly and that the remote user has access to reserved ports. As such, the peer
       hostname should only be trusted to the extent that the local DNS service is trusted.

KERBEROS COMMUNICATION AND AUTHENTICATION

       For more detail, see http://wiki.zmanda.com/index.php/Kerberos_authentication.

       Amanda supports Kerberos 5 communication methods between Amanda server and client.

       General information including compilation are given above (see COMPILATION AND GENERAL
       INFORMATION above).

       Kerberos 5 uses TCP and the server uses only one TCP port and data streams are multiplexed
       to this port.

       The krb5 driver script defaults to:
       /*
        * The lifetime of our tickets in minutes.
        */
       #define AMANDA_TKT_LIFETIME     (12*60)

       /*
        * The name of the service in /etc/services.
        */
       #define AMANDA_KRB5_SERVICE_NAME        "k5amanda"

       You can currently only override these by editing the source code.

       The kerberized AMANDA service uses a different port on the client hosts. The /etc/services
       line is:
          k5amanda      10082/tcp

       And the /etc/inetd.conf line is:

          k5amanda stream tcp nowait root /usr/local/libexec/amanda/amandad amandad -auth=krb5

       Note that you're running this as root, rather than as your dump user. AMANDA will set its
       UID down to the dump user at times it doesn't need to read the keytab file, and give up
       root permissions entirely before it goes off and runs dump. Alternately you can change
       your keytab files to be readable by user amanda. You should understand the security
       implications of this before changing the permissions on the keytab.

       The following dumptype options apply to krb5:

          auth "krb5"    # use krb5 auth for this host
                         # (you can mingle krb hosts and bsd .rhosts in one conf)

       The principal and keytab files that Amanda uses must be set in the amanda.conf file for
       kerberos 5 dumps to work. You can hardcode this in the source code if you really want to
       (common-src/krb5-security.c)

          krb5keytab
          krb5principal

       For example:

          krb5keytab    "/etc/krb5.keytab-amanda"
          krb5principal  "amanda/saidin.omniscient.com"

       The principal in the second option must be contained in the first. The keytab should be
       readable by the amanda user (and definitely not world readable!) and is (obviously) on the
       server. In MIT's kadmin, the following:

          addprinc -randkey amanda/saidin.omniscient.com
          ktadd -k /etc/krb5.keytab-amanda amanda/saidin.omniscient.com

       will do the trick. You will obviously want to change the principal name to reflect
       something appropriate for the conventions at your site.

       You must also configure each client to allow the amanda principal in for dumps.

       There are several ways to go about authorizing a server to connect to a client.

       The normal way is via a .k5amandausers file or a .k5login file in the client user's home
       directory. The determination of which file to use is based on the way you ran configure on
       AMANDA. By default, AMANDA will use .k5amandahosts, but if you configured with
       --without-amandahosts, AMANDA will use .k5login. (similar to the default for
       .rhosts/.amandahosts-style security). The .k5login file syntax is a superset of the
       default krb5 .k5login. The routines to check it are implemented in amanda rather than
       using krb5_kuserok because the connections are actually gssapi based.

       This .k5amandahosts/.k5login is a hybrid of the .amandahosts and a .k5login file. You can
       just list principal names, as in a .k5login file and the principal will be permitted in
       from any host. If you do NOT specify a realm, then there is no attempt to validate the
       realm (this is only really a concern if you have cross-realm authentication set up with
       another realm or something else that allows you multiple realms in your kdc. If you do
       specify a realm, only that principal@realm will be permitted to connect.

       You may prepend this with a hostname and whitespace, and only that principal (with
       optional realm as above) will be permitted to access from that hostname.

       Here are examples of valid entries in the .k5amandahosts:

          service/amanda
          service/amanda@TEST.COM
          dumpmaster.test.com service/amanda
          dumpmaster.test.com service/amanda@TEST.COM

       Rather than using a .k5amandahosts or .k5login file, the easiest way is to use a principal
       named after the destination user, (such as amanda@TEST.COM in our example) and not have
       either a .k5amandahosts or .k5login file in the destination user's home directory.

       There is no attempt to verify the realm in this case (only a concern if you have
       cross-realm authentication setup).

   Authenticated Peer Hostnames with Kerberos Authentication
       When accepting a new incoming connection, the Kerberos authentication mechanism performs a
       similar check to that done by the BSD authentications: the forward and reverse DNS entries
       for the remote host must match. As such, while Kerberos authentication can
       cryptographically ensure that the remote system is recognized (since it has a ticket), its
       assurances about the remote host's identity are weaker and depend on the integrity of the
       DNS.

LOCAL COMMUNICATION

       The Amanda server communicates with the client internally versus over the network, ie. the
       client is also the server.

       This is the only method that requires no authentication as it is clearly not needed.

       The authenticated peer hostname for this authentication will be as reported by gethostname
       if that succeeds, or the fixed string localhost otherwise.

       This method requires the host name in the DLE to be one that refers to this host. Any name
       for which gataddrinfo is able to return at least one address usable as the local end of a
       socket will work.

RSH COMMUNICATION AND AUTHENTICATION

       For more detail, see http://wiki.zmanda.com/index.php/Configuring_rsh_authentication.

       The Amanda server communicates with its client as the Amanda user via the RSH protocol.

       Please note that RSH protocol itself is insecure and should be used with caution
       especially on any servers and clients with public IPs.

       Each Amanda client communicates with the server using one TCP port and all data streams
       from the client are multiplexed over one port. The number of Amanda clients is limited by
       the number of reserved ports available on the Amanda server. Some versions of RSH do not
       use reserved ports and, thus, this restriction is not valid.

       General information including compilation is given above (see COMPILATION AND GENERAL
       INFORMATION above).

       In addition to specifying the auth field in dumptype definition, it might be required to
       specify client-username and amandad fields. If the backup user name is different on the
       Amanda client, the user name is specified as client-username. If the location of the
       Amanda daemon amandad is different on the Amanda client, the location is specified as
       amandad-path field value.

       For example:
       define dumptype rsh_example {
                ...
                auth "rsh"
                client-username "backup"
                amandad-path "/usr/lib/exec/amandad"
                ...
       }

   Authenticated Peer Hostnames with RSH Authentication
       The RSH authentication mechanism does not provide an authenticated peer hostname.

SSH COMMUNICATION AND AUTHENTICATION

       For more detail, see
       http://wiki.zmanda.com/index.php/How_To:Set_up_transport_encryption_with_SSH.

       Amanda client sends data to the server using SSH. SSH keys have to be set up so that
       Amanda server can communicate with its clients using SSH.

       General information including compilation is given above (see COMPILATION AND GENERAL
       INFORMATION above).

       SSH provides transport encryption and authentication. To set up an SSH authentication
       session, Amanda will run the equivalent of the following to start the backup process.
        /path/to/ssh -l user_name client.zmanda.com $libexecdir/amandad

       To use SSH, you need to set up SSH keys either by storing the passphrase in cleartext,
       using ssh-agent, or using no passphrase at all. All of these options have security
       implications which should be carefully considered before adoption.

       When you use a public key on the client to do data encryption (see
       http://wiki.zmanda.com/index.php/How_To:Set_up_data_encryption), you can lock away the
       private key in a secure place. Both, transport and storage will be encrypted with such a
       setup. See http://wiki.zmanda.com/index.php/Encryption for an overview of encryption
       options.

       Enable SSH authentication and set the ssh-keys option in all DLEs for that host by adding
       the following to the DLE itself or to the corresponding dumptype in amanda.conf:

         auth "ssh"
         ssh-keys "/home/backup/.ssh/id_rsa_amdump"

       ssh-keys is the path to the private key on the client. If the username to which Amanda
       should connect is different from the default, then you should also add

         client-username "otherusername"

       If your server amandad path and client amandad path are different, you should also add

         amandad-path "/client/amandad/path"

       Include the keys used for AMANDA in the clients' authorized_keys file, prepended with the
       following options:

         from="amanda_server.your.domain.com",no-port-forwarding,no-X11-forwarding,no-agent-forwarding,command="/absolute/path/to/amandad -auth=ssh amdump" ssh-rsa AAAB3..

       This will limit that key to connect only from Amanda server and only be able to execute
       amandad(8). This avoids several attacks that are possible if the no options are specified
       in the authorized_keys file.

       In the same way, prepend the key used for AMANDA in the server's authorized_keys file
       with:

         from="amanda_client.your.domain.com",no-port-forwarding,no-X11-forwarding,no-agent-forwarding,command="/absolute/path/to/amandad -auth=ssh amindexd amidxtaped"

       You can omit the from=.. option if you have too many clients to list, although this has
       obvious security implications.

       Set ssh-keys and any other necessary options in /etc/amanda/amanda_client.conf:

         auth "ssh"
         ssh-keys "/root/.ssh/id_rsa_amrecover"
         client-username "amanda"
         amandad-path "/server/amandad/path"

       Besides user keys, SSH uses host keys to uniquely identify each host, to prevent one host
       from impersonating another. Unfortunately, the only easy way to set up these host keys is
       to make a connection and tell SSH that you trust the identity:

         $ ssh client1.zmanda.com
         The authenticity of host 'client1.zmanda.com (192.168.10.1)' can't be established.
         RSA key fingerprint is 26:4e:df:a2:be:c8:cb:20:1c:68:8b:cc:c0:3b:8e:9d.
         Are you sure you want to continue connecting (yes/no)?yes

       As Amanda will not answer this question itself, you must manually make every connection
       (server to client and client to server) that you expect Amanda to make. Note that you must
       use the same username that Amanda will use (that is, ssh client and ssh client.domain.com
       are distinct).

   Authenticated Peer Hostnames with SSH Authentication
       When accepting an incoming connection, the SSH daemon gives Amanda information about the
       remote system in the $SSH_CONNECTION environment variable. Amanda parses this information
       to determine the remote address, and then performs a similar check to that done by the BSD
       authentications: the forward and reverse DNS entries for the remote host must match. As
       such, while SSH authentication can cryptographically ensure that the remote system is
       recognized (since it had a recognized secret key), its assurances about the remote host's
       identity are weaker and depend on the integrity of the DNS.

SSL COMMUNICATION AND AUTHENTICATION

       See amanda-auth-ssl(7)

SEE ALSO

       amanda(8), amanda-auth-ssl(7), amanda.conf(5), amanda-client.conf(5), disklist(5),
       amdump(8), amrecover(8)

       The Amanda Wiki: : http://wiki.zmanda.com/

AUTHORS

       Jean-Louis Martineau <martineau@zmanda.com>
           Zmanda, Inc. (http://www.zmanda.com)

       Dustin J. Mitchell <dustin@zmanda.com>
           Zmanda, Inc. (http://www.zmanda.com)

       Paul Yeatman <pyeatman@zmanda.com>
           Zmanda, Inc. (http://www.zmanda.com)