Provided by: opa-fastfabric_10.8.0.0.201+dfsg.1-1_amd64 
NAME
opareports
(All) opareports is a front end to opareport that provides many of the same options and
capabilities. It can also run a report against multiple fabrics or subnets (for example,
local host HFI ports). opareports can use an input file to augment the reports using
additional details from the topology_input file.
Syntax
opareports [-t portsfile] [-p ports] [-T topology_input] [opareport arguments]
Options
--help Produces full help text.
-t portsfile
Specifies the file with list of local HFI ports used to access fabric for
analysis. Default is /etc/opa/ports file.
-p ports Specifies the list of local HFI ports used to access fabric for counter clear.
Default is first active port. The first HFI in the system is 1. The first port
on an HFI is 1. Uses the format hfi:port,
for example:
0:0 First active port in system.
0:y Port y within system.
x:0 First active port on HFI x.
x:y HFI x, port y.
-T topology_input
Specifies the name of a topology input file to use. The filename may have %P as
a marker which is replaced with the hfi:port being operated on, such as 0:0 or
1:2. The default filename is specified by FF_TOPOLOGY_FILE as
/etc/opa/topology.%P.xml. If -T NONE is specified, no topology input file is
used.
opareport arguments
Options are passed to opareport.
Specifies any of the other opareport arguments listed below (see opareport
Options ):
opareport [-v][-q] [-h hfi] [-p port] [--timeout]
[-o report][-d detail] [-P|-H] [-N] [-x]
[-X snapshot_input][-T topology_input] [-s] [-r] [-V]
[-i seconds][-b date_time] [-e date_time] [-C] [-a]
[-m] [-M] [-A][-c file] [-L] [-F point] [-S point]
[-D point] [-Q]
NOTE: When using opareport arguments, regard the following:
• The -h and -X options are not available.
• The meaning of -p is different for opareports than opareport.
• When run against multiple fabrics, the -x and -o snapshot options are not
available.
• When run against multiple fabrics, the -F option is applied to all fabrics.
Examples
opareports
opareports -p '1:1 2:1'
Environment Variables
The following environment variables are also used by this command:
PORTS List of ports, used in absence of -t and -p.
PORTS_FILE
File containing list of ports, used in absence of -t and -p.
FF_TOPOLOGY_FILE
File containing topology_input (may have %P marker in filename), used in absence
of -T.
opareport Options
For reference:
--help Produces full help text.
-v/--verbose
Returns verbose output.
-q/--quiet
Disables progress reports.
-h/--hfi hfi
Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port port is a
system-wide port number. Default is 0.
-p/--port port
Specifies the port, numbered 1..n. Using 0 specifies the first active port.
Default is 0.
--timeout Specifies the timeout (wait time for response) in ms. Default is 1000 ms.
-o/--output report
Specifies the report type for output. Refer to opareport Report Types for
details.
-d/--detail level
Specifies the level of detail 0-n for output. Default is 2.
-P/--persist
Only includes data persistent across reboots.
-H/--hard Only includes permanent hardware data.
-N/--noname
Omits node and IOC names.
-x/--xml Produces output in XML.
-X/--infile snapshot_input
Generates a report using the data in the snapshot_input file. snapshot_input
must have been generated during a previous -o snapshot run. When used, the -s,
-i, -C, and -a options are ignored. '-' may be used as the snapshot_input to
specify stdin.
-T/--topology topology_input
Uses topology_input file to augment and verify fabric information. When used,
various reports can be augmented with information not available electronically
(such as cable labels). '-' may be used to specify stdin.
-s/--stats
Gets performance statistics for all ports.
-i/--interval seconds
Obtains performance statistics over interval seconds. Clears all statistics,
waits interval seconds, then generates report. Implies -s option.
-b/--begin date_time
Obtains past performance stats over an interval beginning at date_time. Implies
-s option. date_time may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY,
dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example, "2016-07-04
14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.
-e/--end date_time
Obtains past performance stats over an interval ending at date_time. Implies -s
option.
date_time may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY,
YYYY-mm-dd or date followed by time; for example, "2016-07-04 14:40". Relative
times are taken as "x [second|minute|hour|day](s) ago.
-C/--clear
Clears performance statistics for all ports. Only statistics with error
thresholds are cleared. A clear occurs after generating the report.
-a/--clearall
Clears all performance statistics for all ports.
-m/--smadirect
Accesses fabric information directly from SMA.
-M/--pmadirect
Accesses performance statistics using direct PMA.
-A/--allports
Gets PortInfo for down switch ports. Uses direct SMA to get this data. If used
with -M, also gets PMA stats for down switch ports.
-c/--config file
Specifies the error thresholds configuration file. Default is
/etc/opa/opamon.conf file.
-L/--limit
Limits operation to exact specified focus with -F for port error counters check
(-o errors) and port counters clear (-C or -i). Normally, the neighbor of each
selected port is also checked/cleared. Does not affect other reports.
-F/--focus point
Specifies the focus area for report.
Limits output to reflect a subsection of the fabric. May not work with all
reports. (For example, route, mcgroups, and the verify* reports may ignore the
option or not generate useful results.)
-S/--src point
Specifies the source for trace route. Default is local port.
-D/--dest point
Specifies the destination for trace route.
-Q/--quietfocus
Excludes focus description from report.
opareport Snapshot-Specific Options
For reference:
-r/--routes
Gets routing tables for all switches.
-V/--vltables
Gets the P-Key tables for all nodes and the QoS VL-related tables for all ports.
opareport Report Types
For reference:
comps Summary of all systems and SMs in fabric.
brcomps Brief summary of all systems and SMs in fabric.
nodes Summary of all node types and SMs in fabric.
brnodes Brief summary of all node types and SMs in fabric.
ious Summary of all IO units in the fabric.
lids Summary of all LIDs in the fabric.
links Summary of all links.
extlinks Summary of links external to systems.
filinks Summary of links to FIs.
islinks Summary of inter-switch links.
extislinks
Summary of inter-switch links external to systems.
slowlinks Summary of links running slower than expected.
slowconfiglinks
Summary of links configured to run slower than supported, includes slowlinks.
slowconnlinks
Summary of links connected with mismatched speed potential, includes
slowconfiglinks.
misconfiglinks
Summary of links configured to run slower than supported.
misconnlinks
Summary of links connected with mismatched speed potential.
errors Summary of links whose errors exceed counts in the configuration file.
otherports
Summary of ports not connected to the fabric.
linear Summary of linear forwarding data base (FDB) for each switch.
mcast Summary of multicast FDB for each switch in the fabric.
mcgroups Summary of multicast groups.
When used in conjunction with -d, the following report details are possible:
• -d0 : Shows the number of multicast groups
• -d1 : Shows a list of multicast groups
• -d2 : Shows a list of members per multicast group
This report can be used with option -X.
portusage Summary of ports referenced in linear FDB for each switch, broken down by
NodeType of DLID.
pathusage Summary of number of FI to FI paths routed through each switch port.
treepathusage
Analysis of number of FI to FI paths routed through each switch port for a FAT
tree.
portgroups
Summary of adaptive routing port groups for each switch.
quarantinednodes
Summary of quarantined nodes.
validateroutes
Validates all routes in the fabric.
validatevlroutes
Validates all routes in the fabric using SLSC, SCSC, and SCVL tables.
validatepgs
Validates all port groups in the fabric.
validatecreditloops
Validates topology configuration of the fabric to identify any existing credit
loops.
validatevlcreditloops
Validates topology configuration of the fabric including SLSC, SCSC, and SCVL
tables to identify any existing credit loops.
validatemcroutes
Validates multicast routes of the fabric to identify loops in multicast
forwarding tables and detect MFT-multicast membership inconsistencies.
vfinfo Summary of virtual fabric (vFabric) information.
vfmember Summary of vFabric membership information.
dgmember Summary of DeviceGroup membership information.
verifyfis Compares fabric (or snapshot) FIs to supplied topology and identifies
differences and omissions.
verifysws Compares fabric (or snapshot) switches to supplied topology and identifies
differences and omissions.
verifynodes
Returns verifyfis and verifysws reports.
verifysms Compares fabric (or snapshot) SMs to supplied topology and identifies
differences and omissions.
verifylinks
Compares fabric (or snapshot) links to supplied topology and identifies
differences and omissions.
verifyextlinks
Compares fabric (or snapshot) links to supplied topology and identifies
differences and omissions. Limits analysis to links external to systems.
verifyfilinks
Compares fabric (or snapshot) links to supplied topology and identify
differences and omissions. Limits analysis to links to FIs.
verifyislinks
Compares fabric (or snapshot) links to supplied topology and identify
differences and omissions. Limits analysis to inter-switch links.
verifyextislinks
Compares fabric (or snapshot) links to supplied topology and identify
differences and omissions. Limits analysis to inter-switch links external to
systems.
verifyall Returns verifyfis, verifysws, verifysms, and verifylinks reports.
all Returns comps, nodes, ious, links, extlinks, slowconnlinks, and errors reports.
route Traces route between -S and -D points.
bfrctrl Reports Buffer Control Tables for all ports.
snapshot Outputs snapshot of the fabric state for later use as snapshot_input. This
implies -x. May not be combined with other reports. When selected, -F, -P, -H,
and -N options are ignored.
topology Outputs the topology of the fabric for later use as topology_input. This implies
-x. May not be combined with other reports. Use with detail level 3 or more to
get Port element under Node in output xml.
none No report, useful to clear statistics.
opareport Point Syntax
For reference:
gid:value value is numeric port GID of form: subnet:guid.
lid:value value is numeric LID.
lid:value:node
value is numeric LID, selects entire node with given LID.
lid:value:port:value2
value is numeric LID of node, value2 is port number.
portguid:value
value is numeric port GUID.
nodeguid:value
value is numeric node GUID.
nodeguid:value1:port:value2
value1 is numeric node GUID, value2 is port number.
iocguid:value
value is numeric IOC GUID.
iocguid:value1:port:value2
value1 is numeric IOC GUID, value2 is port number.
systemguid:value
value is numeric system image GUID.
systemguid:value1:port:value2
value1 is the numeric system image GUID, value2 is port number.
ioc:value value is IOC Profile ID String (IOC Name).
ioc:value1:port:value2
value1 is IOC Profile ID String (IOC Name), value2 is port number.
iocpat:value
value is glob pattern for IOC Profile ID String (IOC Name).
iocpat:value1:port:value2
value1 is glob pattern for IOC Profile ID String (IOC Name), value2 is port
number.
ioctype:value
value is IOC type (SRP or OTHER).
ioctype:value1:port:value2
value1 is IOC type (SRP or OTHER); value2 is port number.
node:value
value is node description (node name).
node:value1:port:value2
value1 is node description (node name), value2 is port number.
nodepat:value
value is glob pattern for node description (node name).
nodepat:value1:port:value2
value1 is the glob pattern for the node description (node name), value2 is port
number.
nodedetpat:value
value is glob pattern for node details.
nodedetpat:value1:port:value2
value1 is the glob pattern for the node details, value2 is port number.
nodetype:value
value is node type (SW, FI, or RT).
nodetype:value1:port:value2
value1 is node type (SW, FI, or RT), value2 is port number.
rate:value
value is string for rate (25g, 50g, 75g, 100g), omits switch mgmt port 0.
portstate:value
value is a string for state (down, init, armed, active, notactive, initarmed).
portphysstate:value
value is a string for PHYs state (polling, disabled, training, linkup, recovery,
offline, test)
mtucap:value
value is MTU size (2048, 4096, 8192, 10240), omits switch mgmt port 0.
labelpat:value
value is glob pattern for cable label.
lengthpat:value
value is glob pattern for cable length.
cabledetpat:value
value is glob pattern for cable details.
cabinflenpat:value
value is glob pattern for cable info length.
cabinfvendnamepat:value
value is glob pattern for cable info vendor name.
cabinfvendpnpat:value
value is glob pattern for cable info vendor part number.
cabinfvendrevpat:value
value is glob pattern for cable info vendor revision.
cabinfvendsnpat:value
value is glob pattern for cable info vendor serial number.
cabinftype:value
value is either optical, passive_copper, active_copper, or unknown.
linkdetpat:value
value is glob pattern for link details.
portdetpat:value
value is glob pattern for port details.
sm Specifies the master subnet manager (SM).
smdetpat:value
value is glob pattern for SM details.
route:point1:point2
Specifies all ports along the routes between the two given points.
led:value value is either on or off for LED port beacon.
linkqual:value
Specifies the ports with a link quality equal to value.
linkqualLE:value
Specifies the ports with a link quality less than or equal to value.
linkqualGE:value
Specifies the ports with a link quality greater than or equal to value.
opareport Examples
For reference:
opareport can generate hundreds of different reports. Commonly generated reports include
the following:opareport -o comps -d 3
opareport -o errors -o slowlinks
opareport -o nodes -F portguid:0x00117500a000447b
opareport -o nodes -F nodeguid:0x001175009800447b:port:1
opareport -o nodes -F nodeguid:0x001175009800447b
opareport -o nodes -F 'node:duster hfi1_0'
opareport -o nodes -F 'node:duster hfi1_0:port:1'
opareport -o nodes -F 'nodepat:d*'
opareport -o nodes -F 'nodepat:d*:port:1'
opareport -o nodes -F 'nodedetpat:compute*'
opareport -o nodes -F 'nodedetpat:compute*:port:1'
opareport -o nodes -F nodetype:FI
opareport -o nodes -F nodetype:FI:port:1
opareport -o nodes -F lid:1
opareport -o nodes -F led:on opareport -o nodes -F led:off opareport -o nodes -F
lid:1:node
opareport -o nodes -F lid:1:port:2
opareport -o nodes -F gid:0xfe80000000000000:0x00117500a000447b
opareport -o nodes -F systemguid:0x001175009800447b
opareport -o nodes -F systemguid:0x001175009800447b:port:1
opareport -o nodes -F iocguid:0x00117501300001e0
opareport -o nodes -F iocguid:0x00117501300001e0:port:2
opareport -o nodes -F 'ioc:Chassis 0x001175005000010C, Slot 2, IOC 1'
opareport -o nodes -F 'ioc:Chassis 0x001175005000010C, Slot 2, IOC 1:port:2'
opareport -o nodes -F 'iocpat:*Slot 2*'
opareport -o nodes -F 'iocpat:*Slot 2*:port:2'
opareport -o nodes -F ioctype:SRP opareport -o nodes -F ioctype:SRP:port:2
opareport -o extlinks -F rate:100g
opareport -o extlinks -F portstate:armed
opareport -o extlinks -F portphysstate:linkup
opareport -o extlinks -F 'labelpat:S1345*'
opareport -o extlinks -F 'lengthpat:11m'
opareport -o extlinks -F 'cabledetpat:*hitachi*'
opareport -o extlinks -F 'linkdetpat:*core ISL*'
opareport -o extlinks -F 'portdetpat:*mgmt*'
opareport -o links -F mtucap:2048
opareport -o nodes -F sm
opareport -o nodes -F 'smdetpat:primary*'
opareport -o nodes -F 'route:node:duster hfi1_0:node:cuda hfi1_0'
opareport -o nodes -F 'route:node:duster hfi1_0:port:1:node:cuda hfi1_0:port:2'
opareport -s -o snapshot > file
opareport -o topology > topology.xml
opareport -o errors -X file
opareport -s --begin "2 days ago"
opareport -s --begin "12:30" --end "14:00"
Details
For simple fabrics, the Intel(R) Omni-Path Fabric Suite FastFabric Toolset host is
connected to a single fabric. By default, the first active port on the FastFabric Toolset
host is used to analyze the fabric.
However, in more complex fabrics, the FastFabric Toolset host may be connected to more
than one fabric or subnet. In this case, you can specify the ports or HFIs to use with one
of the following methods:
• On the command line using the -p option.
• In a file specified using the -t option.
• Through the environment variables PORTS or PORTS_FILE.
• Using the ports_file configuration option in /etc/opa/opafastfabric.conf.
If the specified port does not exist or is empty, the first active port on the local
system is used. In more complex configurations, you must specify the exact ports to use
for all fabrics to be analyzed.
You can specify the topology_input file to be used with one of the following methods:
• On the command line using the -T option.
• In a file specified through the environment variable FF_TOPOLOGY_FILE.
• Using the ff_topology_file configuration option in opafastfabric.conf.
If the specified file does not exist, no topology_input file is used. Alternately the
filename can be specified as NONE to prevent use of an input file.