Provided by:
openafs-fileserver_1.4.4.dfsg1-7_i386 
NAME
fileserver - Initializes the File Server component of the fs process
SYNOPSIS
fileserver [-d <debug level>] [-p <number of processes>]
[-spare <number of spare blocks>]
[-pctspare <percentage spare>] [-b <buffers>]
[-l <large vnodes>] [-s <small nodes>]
[-vc <volume cachesize>] [-w <call back wait interval>]
[-cb <number of call backs>] [-banner] [-novbc]
[-implicit <admin mode bits: rlidwka>]
[-hr <number of hours between refreshing the host cps>]
[-busyat <redirect clients when queue > n>]
[-rxpck <number of rx extra packets>]
[-rxdbg] [-rxdbge] [-m <min percentage spare in partition>]
[-lock] [-L] [-S] [-k <stack size>]
[-realm <Kerberos realm name>]
[-udpsize <size of socket buffer in bytes>]
[-enable_peer_stats] [-enable_process_stats] [-help]
DESCRIPTION
The fileserver command initializes the File Server component of the
"fs" process. In the conventional configuration, its binary file is
located in the /usr/lib/openafs directory on a file server machine.
The fileserver command is not normally issued at the command shell
prompt, but rather placed into a database server machine’s /etc/ope‐
nafs/BosConfig file with the bos create command. If it is ever issued
at the command shell prompt, the issuer must be logged onto a file
server machine as the local superuser "root".
The File Server creates the /var/log/openafs/FileLog log file as it
initializes, if the file does not already exist. It does not write a
detailed trace by default, but use the -d option to increase the amount
of detail. Use the bos getlog command to display the contents of the
log file.
The command’s arguments enable the administrator to control many
aspects of the File Server’s performance, as detailed in OPTIONS. By
default the fileserver command sets values for many arguments that are
suitable for a medium-sized file server machine. To set values suitable
for a small or large file server machine, use the -S or -L flag respec‐
tively. The following list describes the parameters and corresponding
argument for which the fileserver command sets default values, and the
table below summarizes the setting for each of the three machine sizes.
· The maximum number of lightweight processes (LWPs) the File Server
uses to handle requests for data; corresponds to the -p argument.
The File Server always uses a minimum of 32 KB for these processes.
· The maximum number of directory blocks the File Server caches in
memory; corresponds to the -b argument. Each cached directory block
(buffer) consumes 2,092 bytes of memory.
· The maximum number of large vnodes the File Server caches in memory
for tracking directory elements; corresponds to the -l argument.
Each large vnode consumes 292 bytes of memory.
· The maximum number of small vnodes the File Server caches in memory
for tracking file elements; corresponds to the -s argument. Each
small vnode consumes 100 bytes of memory.
· The maximum volume cache size, which determines how many volumes
the File Server can cache in memory before having to retrieve data
from disk; corresponds to the -vc argument.
· The maximum number of callback structures the File Server caches in
memory; corresponds to the -cb argument. Each callback structure
consumes 16 bytes of memory.
· The maximum number of Rx packets the File Server uses; corresponds
to the -rxpck argument. Each packet consumes 1544 bytes of memory.
The default values are:
Parameter (Argument) Small (-S) Medium Large (-L)
---------------------------------------------------------------------
Number of LWPs (-p) 6 9 12
Number of cached dir blocks (-b) 70 90 120
Number of cached large vnodes (-l) 200 400 600
Number of cached small vnodes (-s) 200 400 600
Maximum volume cache size (-vc) 200 400 600
Number of callbacks (-cb) 20,000 60,000 64,000
Number of Rx packets (-rxpck) 100 150 200
To override any of the values, provide the indicated argument (which
can be combined with the -S or -L flag).
The amount of memory required for the File Server varies. The approxi‐
mate default memory usage is 751 KB when the -S flag is used (small
configuration), 1.1 MB when all defaults are used (medium configura‐
tion), and 1.4 MB when the -L flag is used (large configuration). If
additional memory is available, increasing the value of the -cb and -vc
arguments can improve File Server performance most directly.
By default, the File Server allows a volume to exceed its quota by 1 MB
when an application is writing data to an existing file in a volume
that is full. The File Server still does not allow users to create new
files in a full volume. To change the default, use one of the following
arguments:
· Set the -spare argument to the number of extra kilobytes that the
File Server allows as overage. A value of 0 allows no overage.
· Set the -pctspare argument to the percentage of the volume’s quota
the File Server allows as overage.
By default, the File Server implicitly grants the "a" (administer) and
"l" (lookup) permissions to system:administrators on the access control
list (ACL) of every directory in the volumes stored on its file server
machine. In other words, the group’s members can exercise those two
permissions even when an entry for the group does not appear on an ACL.
To change the set of default permissions, use the -implicit argument.
The File Server maintains a host current protection subgroup (host CPS)
for each client machine from which it has received a data access
request. Like the CPS for a user, a host CPS lists all of the Protec‐
tion Database groups to which the machine belongs, and the File Server
compares the host CPS to a directory’s ACL to determine in what manner
users on the machine are authorized to access the directory’s contents.
When the pts adduser or pts removeuser command is used to change the
groups to which a machine belongs, the File Server must recompute the
machine’s host CPS in order to notice the change. By default, the File
Server contacts the Protection Server every two hours to recompute host
CPSs, implying that it can take that long for changed group memberships
to become effective. To change this frequency, use the -hr argument.
The File Server generates the following message when a partition is
nearly full:
No space left on device
This command does not use the syntax conventions of the AFS command
suites. Provide the command name and all option names in full.
CAUTIONS
Do not use the -k and -w arguments, which are intended for use by the
AFS Development group only. Changing them from their default values can
result in unpredictable File Server behavior. In any case, on many
operating systems the File Server uses native threads rather than the
LWP threads, so using the -k argument to set the number of LWP threads
has no effect.
Do not specify both the -spare and -pctspare arguments. Doing so causes
the File Server to exit, leaving an error message in the /var/log/ope‐
nafs/FileLog file.
Options that are available only on some system types, such as the -m
and -lock options, appear in the output generated by the -help option
only on the relevant system type.
OPTIONS
-d <debug level>
Sets the detail level for the debugging trace written to the
/var/log/openafs/FileLog file. Provide one of the following values,
each of which produces an increasingly detailed trace: 0, 1, 5, 25,
and 125. The default value of 0 produces only a few messages.
-p <number of processes>
Sets the number of threads to run. Provide a positive integer. The
File Server creates and uses five threads for special purposes, in
addition to the number specified (but if this argument specifies
the maximum possible number, the File Server automatically uses
five of the threads for its own purposes).
The maximum number of threads can differ in each release of AFS.
Consult the IBM AFS Release Notes for the current release.
-spare <number of spare blocks>
Specifies the number of additional kilobytes an application can
store in a volume after the quota is exceeded. Provide a positive
integer; a value of 0 prevents the volume from ever exceeding its
quota. Do not combine this argument with the -pctspare argument.
-pctspare <percentage spare>
Specifies the amount by which the File Server allows a volume to
exceed its quota, as a percentage of the quota. Provide an integer
between 0 and 99. A value of 0 prevents the volume from ever
exceeding its quota. Do not combine this argument with the -spare
argument.
-b <buffers>
Sets the number of directory buffers. Provide a positive integer.
-l <large vnodes>
Sets the number of large vnodes available in memory for caching
directory elements. Provide a positive integer.
-s <small nodes>
Sets the number of small vnodes available in memory for caching
file elements. Provide a positive integer.
-vc <volume cachesize>
Sets the number of volumes the File Server can cache in memory.
Provide a positive integer.
-w <call back wait interval>
Sets the interval at which the daemon spawned by the File Server
performs its maintenance tasks. Do not use this argument; changing
the default value can cause unpredictable behavior.
-cb <number of callbacks>
Sets the number of callbacks the File Server can track. Provide a
positive integer.
-banner
Prints the following banner to /dev/console about every 10 minutes.
File Server is running at I<time>.
-novbc
Prevents the File Server from breaking the callbacks that Cache
Managers hold on a volume that the File Server is reattaching after
the volume was offline (as a result of the vos restore command, for
example). Use of this flag is strongly discouraged.
-implicit <admin mode bits>
Defines the set of permissions granted by default to the sys‐
tem:administrators group on the ACL of every directory in a volume
stored on the file server machine. Provide one or more of the stan‐
dard permission letters ("rlidwka") and auxiliary permission let‐
ters ("ABCDEFGH"), or one of the shorthand notations for groups of
permissions ("all", "none", "read", and "write"). To review the
meaning of the permissions, see the fs setacl reference page.
-hr <number of hours between refreshing the host cps>
Specifies how often the File Server refreshes its knowledge of the
machines that belong to protection groups (refreshes the host CPSs
for machines). The File Server must update this information to
enable users from machines recently added to protection groups to
access data for which those machines now have the necessary ACL
permissions.
-busyat <redirect clients when queue > n>
Defines the number of incoming RPCs that can be waiting for a
response from the File Server before the File Server returns the
error code "VBUSY" to the Cache Manager that sent the latest RPC.
In response, the Cache Manager retransmits the RPC after a delay.
This argument prevents the accumulation of so many waiting RPCs
that the File Server can never process them all. Provide a positive
integer. The default value is 600.
-rxpck <number of rx extra packets>
Controls the number of Rx packets the File Server uses to store
data for incoming RPCs that it is currently handling, that are
waiting for a response, and for replies that are not yet complete.
Provide a positive integer.
-rxdbg
Writes a trace of the File Server’s operations on Rx packets to the
file /var/log/openafs/rx_dbg.
-rxdbge
Writes a trace of the File Server’s operations on Rx events (such
as retransmissions) to the file /var/log/openafs/rx_dbg.
-m <min percentage spare in partition>
Specifies the percentage of each AFS server partition that the AIX
version of the File Server creates as a reserve. Specify an integer
value between 0 and 30; the default is 8%. A value of 0 means that
the partition can become completely full, which can have serious
negative consequences.
-lock
Prevents any portion of the fileserver binary from being paged
(swapped) out of memory on a file server machine running the IRIX
operating system.
-L Sets values for many arguments in a manner suitable for a large
file server machine. Combine this flag with any option except the
-S flag; omit both flags to set values suitable for a medium-sized
file server machine.
-S Sets values for many arguments in a manner suitable for a small
file server machine. Combine this flag with any option except the
-L flag; omit both flags to set values suitable for a medium-sized
file server machine.
-k <stack size>
Sets the LWP stack size in units of 1 kilobyte. Do not use this
argument, and in particular do not specify a value less than the
default of 24.
-realm <Kerberos realm name>
Defines the Kerberos realm name for the File Server to use. If this
argument is not provided, it uses the realm name corresponding to
the cell listed in the local /etc/openafs/server/ThisCell file.
-udpsize <size of socket buffer in bytes>
Sets the size of the UDP buffer, which is 64 KB by default. Provide
a positive integer, preferably larger than the default.
-enable_peer_stats
Activates the collection of Rx statistics and allocates memory for
their storage. For each connection with a specific UDP port on
another machine, a separate record is kept for each type of RPC
(FetchFile, GetStatus, and so on) sent or received. To display or
otherwise access the records, use the Rx Monitoring API.
-enable_process_stats
Activates the collection of Rx statistics and allocates memory for
their storage. A separate record is kept for each type of RPC
(FetchFile, GetStatus, and so on) sent or received, aggregated over
all connections to other machines. To display or otherwise access
the records, use the Rx Monitoring API.
-help
Prints the online help for this command. All other valid options
are ignored.
EXAMPLES
The following bos create command creates an fs process on the file
server machine "fs2.abc.com" that uses the large configuration size,
and allows volumes to exceed their quota by 10%. Type the command on a
single line:
% bos create -server fs2.abc.com -instance fs -type fs \
-cmd "/usr/lib/openafs/fileserver -pctspare 10 \
-L" /usr/lib/openafs/volserver /usr/lib/openafs/salvager
The issuer must be logged in as the superuser "root" on a file server
machine to issue the command at a command shell prompt. It is conven‐
tional instead to create and start the process by issuing the bos cre
ate command.
BosConfig(5), FileLog(5), bos_create(8), bos_getlog(8), fs_setacl(1),
salvager(8), volserver(8)
COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0.
It was converted from HTML to POD by software written by Chas Williams
and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.