Provided by: postfix_2.5.1-2ubuntu1_i386 bug


       pcre_table - format of Postfix PCRE tables


       postmap -q "string" pcre:/etc/postfix/filename

       postmap -q - pcre:/etc/postfix/filename <inputfile


       The  Postfix  mail  system  uses optional tables for address rewriting,
       mail routing, or access control. These tables are usually in dbm or  db

       Alternatively,  lookup  tables  can  be  specified  in  Perl Compatible
       Regular Expression form. In this case, each input is compared against a
       list  of  patterns.  When a match is found, the corresponding result is
       returned and the search is terminated.

       To find out what types of lookup tables your  Postfix  system  supports
       use the "postconf -m" command.

       To test lookup tables, use the "postmap -q" command as described in the
       SYNOPSIS above.


       With Postfix version 2.2 and earlier specify "postmap -fq" to  query  a
       table   that  contains  case  sensitive  patterns.  Patterns  are  case
       insensitive by default.


       The general form of a PCRE table is:

       /pattern/flags result
              When pattern matches the input  string,  use  the  corresponding
              result value.

       !/pattern/flags result
              When   pattern   does  not  match  the  input  string,  use  the
              corresponding result value.

       if /pattern/flags

       endif  Match the input string  against  the  patterns  between  if  and
              endif,  if  and  only  if  that  same  input string also matches
              pattern. The if..endif can nest.

              Note: do not prepend whitespace to patterns inside if..endif.

              This feature is available in Postfix 2.1 and later.

       if !/pattern/flags

       endif  Match the input string  against  the  patterns  between  if  and
              endif,  if  and  only  if  that same input string does not match
              pattern. The if..endif can nest.

              Note: do not prepend whitespace to patterns inside if..endif.

              This feature is available in Postfix 2.1 and later.

       blank lines and comments
              Empty lines and whitespace-only lines are ignored, as are  lines
              whose first non-whitespace character is a ‘#’.

       multi-line text
              A  logical  line  starts  with  non-whitespace text. A line that
              starts with whitespace continues a logical line.

       Each  pattern  is  a  perl-like  regular  expression.  The   expression
       delimiter  can  be  any character, except whitespace or characters that
       have special meaning (traditionally the forward slash  is  used).   The
       regular expression can contain whitespace.

       By  default, matching is case-insensitive, and newlines are not treated
       as special characters. The behavior is controlled by flags,  which  are
       toggled  by appending one or more of the following characters after the

       i (default: on)
              Toggles the case sensitivity flag. By default, matching is  case

       m (default: off)
              Toggles the PCRE_MULTILINE flag. When this flag is on, the ^ and
              $ metacharacters match immediately after and immediately  before
              a  newline  character,  respectively, in addition to matching at
              the start and end of the subject string.

       s (default: on)
              Toggles the PCRE_DOTALL flag.  When  this  flag  is  on,  the  .
              metacharacter   matches  the  newline  character.  With  Postfix
              versions prior to 2.0, The flag is  off  by  default,  which  is
              inconvenient for multi-line message header matching.

       x (default: off)
              Toggles the pcre extended flag. When this flag is on, whitespace
              in the pattern (other than in a character class) and  characters
              between  a  #  outside  a  character  class and the next newline
              character are ignored. An escaping  backslash  can  be  used  to
              include a whitespace or # character as part of the pattern.

       A (default: off)
              Toggles  the  PCRE_ANCHORED  flag.   When  this  flag is on, the
              pattern is forced to be "anchored", that is, it  is  constrained
              to match only at the start of the string which is being searched
              (the "subject string"). This effect  can  also  be  achieved  by
              appropriate constructs in the pattern itself.

       E (default: off)
              Toggles  the PCRE_DOLLAR_ENDONLY flag. When this flag is on, a $
              metacharacter in the pattern matches only  at  the  end  of  the
              subject  string.  Without  this  flag,  a  dollar  also  matches
              immediately before the  final  character  if  it  is  a  newline
              character  (but  not  before any other newline characters). This
              flag is ignored if PCRE_MULTILINE flag is set.

       U (default: off)
              Toggles the ungreedy matching flag.  When this flag is  on,  the
              pattern   matching   engine  inverts  the  "greediness"  of  the
              quantifiers so that they are not greedy by default,  but  become
              greedy  if  followed  by  "?".  This flag can also set by a (?U)
              modifier within the pattern.

       X (default: off)
              Toggles  the  PCRE_EXTRA  flag.   When  this  flag  is  on,  any
              backslash  in a pattern that is followed by a letter that has no
              special  meaning  causes  an   error,   thus   reserving   these
              combinations for future expansion.


       Patterns  are  applied  in the order as specified in the table, until a
       pattern is found that matches the input string.

       Each pattern is applied to the entire input string.  Depending  on  the
       application, that string is an entire client hostname, an entire client
       IP address, or an entire mail  address.   Thus,  no  parent  domain  or
       parent  network  search is done, and user@domain mail addresses are not
       broken up into their user and domain constituent parts, nor is user+foo
       broken up into user and foo.


       Substitution  of substrings from the matched expression into the result
       string is possible using the conventional perl syntax ($1,  $2,  etc.);
       specify  $$  to  produce  a  $  character as output.  The macros in the
       result string may need to be written as ${n} or  $(n)  if  they  aren’t
       followed by whitespace.

       Note: since negated patterns (those preceded by !) return a result when
       the expression does not match,  substitutions  are  not  available  for
       negated patterns.


       # Protect your outgoing majordomo exploders
       /^(?!owner-)(.*)-outgoing@(.*)/ 550 Use ${1}@${2} instead

       # Bounce friend@whatever, except when whatever is our domain (you would
       # be better just bouncing all friend@ mail - this is just an example).
       /^(friend@(?!my\.domain$).*)$/  550 Stick this in your pipe $1

       # A multi-line entry. The text is sent as one line.
        550 This user is a funny one. You really don’t want to send mail to
        them as it only makes their head spin.


       /^Subject: make money fast/     REJECT
       /^To: friend@public\.com/       REJECT


       # First skip over base 64 encoded text to save CPU cycles.
       # Requires PCRE version 3.
       ~^[[:alnum:]+/]{60,}$~          OK

       # Put your own body patterns here.


       postmap(1), Postfix lookup table manager
       postconf(5), configuration parameters
       regexp_table(5), format of POSIX regular expression tables


       Use  "postconf readme_directory" or "postconf html_directory" to locate
       this information.
       DATABASE_README, Postfix lookup table overview


       The PCRE table lookup code was originally written by:
       Andrew McNamara Pty. Ltd.
       Level 3, 213 Miller St
       North Sydney, NSW, Australia

       Adopted and adapted by:
       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA