Provided by: xlife_5.0-7ubuntu2_i386 bug


       lifesearchdump - search for oscillators and ancestors of life patterns


       lifesearchdump -r rows -c columns -g generations [options...]


       This  program  attempts  to find life objects which are periodic, which
       are spaceships, or which are parents of a given object. (Ncurses)

       You specify a region  to  search  in,  the  number  of  generations  of
       interest,  and  some  initial cells.  The program then searches for all
       objects which satisfy the conditions.  The  search  applies  transition
       and  implication  rules  which  restrict the number of possible objects
       considered to a small fraction of the  total  number.   This  makes  it
       practical  to  find  these  objects  in  a  reasonable  amount of time.
       (Reasonable ranges from a few minutes to many days,  depending  on  the
       size of the search.)

       The algorithm used here is based on the one described by Dean Hickerson
       in a document included  with  the  xlife  distribution.   Reading  that
       document  will explain how the search in this program works, except for
       minor changes.

       The program usually looks for an object which is periodic in the number
       of  generations  specified  by  the -g option.  For example, use -g3 to
       look for period 3 oscillators or spaceships.   The  program  is  pretty
       fast  for  period  2, satisfactory for period 3, long for period 4, and
       very long for period 5.

       By default, the program only finds objects which have the  full  period
       specified  by  the  -g  option.   Objects having subperiods of the full
       period are skipped.  For example, when using -g4, all stable objects or
       period  2  oscillators  will  not be found.  The -a command line option
       disables this skipping, thus  finding  all  objects,  even  those  with
       subperiods.   You  probably  want  to use -a if you use any of the -tr,
       -tc, or -p options.

       The object is limited to the number of rows and  columns  specified  by
       the -r and -c options.  Cells outside of this boundary are assumed OFF.
       Thus if any generation of the object would expand out of the box,  then
       the  object  will not be found.  The program finds things quicker for a
       smaller number of rows and columns.  Searching proceeds  from  left  to
       right column by column, and within a column from middle to edge.  It is
       quicker to search when there are less rows than columns.

       The three command line options -r,  -c,  and  -g  are  always  required
       (unless  you  are  continuing a search using -l or -ln).  If you do not
       specify these options, or give them illegal arguments, a brief  message
       will  be output and the program will exit.  All other options are truly

       If you want to find a  symmetric  object,  then  use  the  -sr  or  -sc
       options.  The -sr option enforces symmetry around the middle row if the
       number of rows is odd, or the middle two rows if the number of rows  is
       even.  The -sc option does the same thing for columns.  You can specify
       both options to look for fourfold symmetry.  These options  will  speed
       up the search since fewer cells need examining, but of course will miss
       all unsymmetric objects.

       Another way to speed up the search is to use the -m option to limit the
       number  of  ON  cells  in  generation  0.  This will of course miss any
       objects which have too many cells.

       By default, the program looks for purely periodic objects.  To  find  a
       spaceship,   you  must  use  the  -tr  or  -tc  options  to  specify  a
       translation.  This makes generation N-1 shift  right  or  down  by  the
       specified  number  of cells in order to become generation 0.  Thus this
       finds spaceships which move leftwards or upwards.  Use -tc to translate
       columns (thus making horizontal ships), and -tr to translate rows (thus
       making  vertical  ships),  or  a  combination  (thus  making   diagonal
       spaceships).   The slowest ship for any period uses a translation of 1,
       as for example -tc1.  Remember that the fastest horizontal speed is C/2
       and  the fastest diagonal speed is C/4, so that for example, using -tc2
       for a period 3 spaceship will find nothing.

       By default, the program looks for  objects  such  that  generation  N-1
       implies  generation  0,  so that periodic objects can be found.  The -p
       command  line  option  disables  this  circular  dependency,  so   that
       generation  0  has  no  past  and  generation  N-1 has no future.  This
       enables you to search  for  the  parents  of  any  object  you  desire.
       Commonly  you specify -g2 with this option, to look only one generation
       back.  To look for parents of an object, you specify the cells  of  the
       object  in  generation  N-1, and leave the earlier generations unknown.
       The ‘c’ command is useful with this option to  completely  specify  the
       last generation (see below).

       The  search  program  is  always  in one of two modes.  It is either in
       command mode, or in search mode.  When first started, it is in  command
       mode.   Command  mode  is  indicated  by the presence of a "> " prompt.
       When in command mode, you can enter commands to the  program,  one  per
       line.   To  leave  command mode and begin searching, you simply enter a
       blank line.  You can get back to command mode again by  generating  the
       SIGINT signal.  When this is done, the program will stop searching at a
       convenient place, display the lastest status of the  search,  and  read
       commands again.  Do not forget to later type the blank line to continue
       searching again!

       When first started, you may wish to specify the state of some cells  to
       guide  the  search.   You  can  specify that any cell in any generation
       should be either ON or OFF.  Cells  that  you  do  not  specify  remain
       unknown.  As an example, if you were looking for a period 3 oscillator,
       you might want to specify the middle cell as being ON in generation  0,
       and  OFF  in  generation  1.  This would force period 3 behavior.  Note
       that when you specify cells, the state  specified  is  permanent.   The
       program  will not reverse your settings, and therefore can not find any
       objects which do not match your  settings.   Also  note  that  settings
       unfortunately  cannot  be  corrected,  so  if you set the wrong cell by
       mistake, you must leave the program and start again.

       To specify a cell, you use the ‘s’ command when in command mode.   This
       command  takes  2  or 3 arguments.  The first two arguments are the row
       and column numbers of the cell to set.  The third number  is  either  1
       for  setting  the cell ON, or 0 for setting the cell OFF.  If the third
       number is omitted, then ON is assumed.  The cell is always set  in  the
       current generation, which is the one last displayed.  If necessary, you
       use the ’n’ or ’p’ commands to change the  current  generation  to  the
       desired  one  before  using  the  ’s’  command.   For  example,  if the
       currently displayed generation is generation 0, entering "s 5 6"  would
       set the cell at row 5 column 6 of generation 0 to ON, whereas "s 2 7 0"
       would set the cell at row 2 column 7 to OFF.  As a  shortcut,  you  can
       omit  the  ’s’  letter, so that the command "5 6" would set the cell at
       row 5 column 6 ON.  If you  are  using  the  -sr  or  -sc  options  for
       symmetry, you don’t have to enter the symmetric cells since the program
       does that for you.

       You can use the -i or -ia options to input  the  initial  settings  for
       either  generation  0 or the last generation instead of typing in their
       coordinates manually as above.  The setting is normally for  generation
       0, but if the -p option was also used, then the setting is for the last
       generation.  The specified file contains a picture of the  cells,  with
       ’O’  or  ’*’  indicating  ON,  ’.’  indicating  OFF, and ’?’ indicating
       unknown.  If you use -i, then only the ON cells are set, making the OFF
       cells  stay  unknown.   If  you use -ia, then both ON and OFF cells are
       set.  You can still specify additional cells after the ones in the file
       have been read.

       The ‘c’ command will set all the currently unknown cells in the current
       generation to the  OFF  state.   This  is  intended  to  be  used  when
       searching  for parents of an object that you have entered, and you know
       exactly what the object  in  the  last  generation  looks  like.   This
       command requires confirmation before it is acted on.

       Just before entering command mode, or occasionally if automatic viewing
       is enabled, the program will display the current status of the  search.
       Cells  marked  as  ’O’  are  ON, cells marked as ’.’ are OFF, and cells
       marked as ’?’ are currently unknown.  The  generation  number  and  the
       number  of ON cells are also given, along with some of the command line
       options that were used to start the program.

       If you don’t like to  keep  hitting  interrupt  in  order  to  see  the
       progress of a search, you can tell the program to automatically display
       the object every so often.  This is done either  with  the  -v  command
       line  option,  or  the  ‘v’  command.  The numeric argument is how many
       thousand search iterations to perform between displays.  As an example,
       the  command  line option -v1 displays about every 5 seconds for a 20MH

       Normally if the program finds something, it will display the object and
       wait  for  commands.   At  this  point  you can write out the object if
       desired.  Typing ‘N’ will continue looking for  further  objects  which
       work.   If  you  specified  the  -a  command  line option, then the ‘N’
       command will be needed immediately after  starting  a  search  with  no
       initial  settings, since the state of all OFF cells obviously satisfies
       all conditions.

       However, if you specify the -o option on the command line, the  program
       will  NOT  stop  when  it finds an object.  Instead, it will append the
       found object to the specified file name, and automatically keep looking
       for  further objects which work.  The objects stored in the output file
       are separated with blank lines.  When no more objects have been  found,
       the program will print a final status message and exit.

       The  following  is  a  summary  of all the commands available.  The ‘s’
       command sets cells and has  already  been  described  above.   The  ‘n’
       command  displays  the  next generation of the current object, and will
       wrap around from the last generation back to  generation  0.   The  ‘p’
       command  displays  the  previous generation, also wrapping around.  The
       ‘w’ command writes out a picture of the current generation out  to  the
       specified  file.   The ‘d’ command dumps the state of the search out to
       the  specified  file  (see  below).   The  ‘N’  command  will  continue
       searching  for the next object after an object has been found.  The ‘v’
       option specifies the frequency of automatic viewing.  The  ‘c’  command
       turns  all  unknown  cells in the current generation OFF.  Finally, the
       ‘q’ command quits the program (confirmation is required).

       Since it can take a very long time to  find  something  (days  or  even
       weeks!), the current state of a search can be dumped to a file and read
       again later.  You can explicitly dump the status to a file by using the
       ‘d’  command.   After  this  has been done, you can use ‘q’ to quit the
       program.  Then later, you  can  use  the  -l  command  line  option  to
       continue searching.

       More useful and safer, however, is the autodump feature of the program.
       Using the -d command line option  causes  a  dump  status  file  to  be
       automatically  written  after  every  so  many search iterations.  Thus
       every so often the specified file will contain the latest status of the
       search.   Then  if your machine crashes, you will not have lost days of
       work.  The -d option  takes  a  numeric  operand,  which  is  how  many
       thousand  searches  to  perform between dumps.  The option also takes a
       filename  as  an  argument,  and  if  it  isn’t  given,   defaults   to
       "lifesrc.dmp".   As  an  example,  the  option  "-d100  foo" results in
       automatically dumping status about every 10 minutes to the file  "foo".

       To  load  the dumped state that has been saved to a file, use the -l or
       -ln  command  line  options.   Since  the  status  file  contains   all
       information  about the search configuration, you do not need to specify
       the number of rows, columns, generations, translations, symmetries,  or
       initial  settings  again.   However,  if  you wish autodumps, an output
       file, or automatic viewing, then you  have  to  specify  those  options

       After  the  state has been loaded, generation 0 is displayed and either
       the program enters command mode if -l was  used,  or  else  the  search
       immediately  continues  where  it  left  off  if -ln was used.  The -ln
       option is provided so that continuing the search program  within  shell
       scripts is easy.

       There  are two versions of the program, called lifesrc and lifesrcdumb.
       They perform the same functions, but the user interfaces  are  slightly
       different.   Lifesrc  uses  the  curses display routines to display the
       objects prettily, whereas lifesrcdumb assumes nothing  fancy  and  just
       prints objects simply.

       As  you  can see, finding something requires skill, luck, and patience.
       Since you are limiting the search by specifying a rectangle,  symmetry,
       maximum  cells,  and  initial  cells, you probably have to keep varying
       these parameters in order to come across something.


       Example searches are the following:

       lifesrc -r5 -c5 -g2 -a                  stable and period 2 oscillators

       lifesrc -r10 -c10 -g3 -sr -sc -v1       period 3 oscillator

       lifesrc -r4 -c4 -g4 -tr1 -tc1           glider

       lifesrc -r5 -c7 -g4 -tc2                usual small spaceship

       lifesrc -r5 -c16 -g3 -tr1 -v1           period 3 spaceship

       lifesrc -r5 -c5 -g2 -p -a               parents of glider (needs input)




       David I. Bell.  Based on an algorithm description by Dean Hickerson.