Provided by: fsp_2.81.b24-2ubuntu1_i386 bug

NAME

       Environment variables used by FSP Clients programs

SYNOPSIS

       setenv VARIABLE value | export VARIABLE=value

ENVIRONMENT

       The following variables are used for access FSP servers:

       FSP_HOST
              The  name or internet number of the machine with the FSP server.
              Required.

       FSP_PORT
              The port number of the  UDP  socket  used  by  the  FSP  server.
              Required.

       FSP_LOCALIP
              Local  Address  of UDP socket used by FSP client utilities. This
              IP address must be one of your local IP addresses. If not  used,
              TCP  protocol  stack  sets  the default. This variable is mainly
              used for multi-homed hosts.

       FSP_LOCALPORT
              The port number of the UDP socket used by FSP client  utilities.
              The  only  reason  to  define  this variable is to ensure mutual
              exclusion of  client  commands  when  none  of  the  udp  packet
              multiplexing  mechanisms  are  enabled during compile time.  You
              may pick any number not currently used for other purposes.

       FSP_PASSWORD
              Access password for FSP server. Directories on FSP server can be
              password  protected.  FSP server can change your access level if
              you have provided a correct password. There are 2 access levels:
              public and owner.

       FSP_BUF_SIZE
              Prefered  size  of  server  reply. Default is 1024 which is also
              maximum allowed value by all servers. Some  servers  can  accept
              larger packets and you will get some extra speed with them.  You
              can lower that value if you want to  get  smaller  packets  from
              server.

       FSP_DIR
              The  current  working directory of the client in the FSP server.
              The server’s root is /.

       FSP_TRACE
              If this variable is set to any value, program will  display  the
              number  of  kilo-byte blocks transferred as transfer progresses.
              Also shown will be a measure of characters per  second  so  that
              network  speed  has  an  indicator.  This variable has no effect
              when the standard output is a terminal.

       FSP_TIMEOUT
              If this variable is  set,  it  contains  the  timeout  value  in
              seconds.   The default value is 360.  No function if program was
              compiled without timeout code.

       FSP_DELAY
              Minimum wait time before resending packet in milliseconds.  This
              should be set close to expected round trip time.

       FSP_MAXDELAY
              Maximum wait time before resending packet in milliseconds.

       FSP_LOCAL_DIR
              Where to look for local files. Default is current directory.