Provided by: wcd_3.2.0-1_i386 bug

NAME

       wcd - Wherever Change Directory
       chdir for DOS and Unix

SYNOPSIS

       wcd [drive:][dir] [-A <path>] [-a[a]] [-b] [-c] [-d <drive>]
       [-E <path>] [-e[e]] [-f <treefile>] [-G <path>] [-GN] [-g[a|d]]
       [-h] [-i] [-j] [-k] [-l] [-[m|M|r|rmtree] <dir>] [-N] [-n <path>]
       [-o[d]] [-Q] [-S <path>] [-s] [-t] [-u <username>] [-V] [-v] [-w]
       [-x <path>] [-xf <file>] [-z #] [-[#]] [+[#]] [=]

DESCRIPTION

       Wcd.   Directory  changer  for  DOS  and  Unix.   Another Norton Change
       Directory (NCD) clone with more features.

       Wcd is a program to change directory fast. It saves time typing at  the
       keyboard.  One  needs  to  type only a part of a directory name and wcd
       will jump to it. Wcd has a fast selection method in  case  of  multiple
       matches  and  allows  aliasing  and  banning  of  directories. Wcd also
       includes a full-screen interactive directory browser with speed search.

       By default (if no wildcards are used) wcd searches for a directory with
       a name that begins with the typed name.

       For instance:

          wcd Desk

       will change to directory /home/waterlan/Desktop
       When there are multiple matches, wcd will present the user  a  list  of
       all  matches.  The user can then make a selection with a few keystrokes
       (most of the times only one).

       Wcd fully supports wildcards, i.e. *, ? and [SET].

       ‘*’ matches any sequence of characters (zero or more)
       ‘?’ matches any character
       [SET] matches any character in the specified set,
       [!SET] or [^SET] matches any character not in the specified set.

       A set  is  composed  of  characters  or  ranges;  a  range  looks  like
       ‘‘character hyphen character’’ (as in 0-9 or A-Z).  [0-9a-zA-Z_] is the
       minimal set of characters allowed in the [..] pattern construct.  Other
       characters  are  allowed  (i.e.  8  bit characters) if your system will
       support them.  To suppress the special syntactic significance of any of
       ‘‘[]*?!^-\’’,  in-  side  or  outside  a  [..]  construct and match the
       character exactly, precede it with a ‘‘\’’ (backslash).

       Using wildcards makes powerful searching possible. For instance:

          wcd *top
       match any directory name that ends with "top".

          wcd *top*
       match any directory that has "top" in the name.

          wcd [a-c]*
       match any directory name that begins with "a", "b" or "c".

       It is also possible to give a part of a directory path.  E.g.:

          wcd me/Desk

       wcd searches for directory that  begins  with  "Desk"  and  which  path
       matches *me/Desk*

       It  is  allowed  to  type  any  kind  of  expression  with  slashes and
       wildcards. E.g.:

          wcd src*/*1?/a*2

       If no wildcards are used and wcd finds a perfect match, wcd will ignore
       all  wild matches by default. This behaviour can be changed with the -w
       option.

       The interactive directory browser can be started by using option -g.

          wcd -g

       See option -g for more information.

       Wcd generates a treedata file were it searches the directory.  On  Unix
       systems  wcd  does  add  links to the treedata files while scanning the
       disk, but does not follow them.  While following links wcd could end up
       scanning infinite loops, or scan very large portions of a network.

       Wcd  can  also change to directories that are not in the treedata file.
       E.g.:

          wcd ..

       If wcd found a match but cannot change to the  directory  it  tries  to
       remove  it from the default treedata file.  Not from the extra treedata
       file.  See also option -k.

       Wcd keeps a directory stack which is stored on disk. The  stack  has  a
       default size of 10 and is cyclic. See options -z, -, + and =.

       Wcd supports 8 bit character sets (non-ASCII characters).

       In multi-user environments a very handy option -u can be used to change
       to directories of other users. See option -u.

       On DOS and Windows systems it does not matter if you use a slash (/) or
       a backslash (\) as directory-separator.

       It is possible on DOS and Windows systems to change drive and directory
       in one go by preceding the directory name with the drive name.

          wcd d:games

       The Windows versions (console, zsh, cygwin) support Windows SMB LAN UNC
       paths  without  drive  letter  such  as \\servername\sharename. Wcd for
       windows console makes use of the ’pushd’ command to automatically map a
       UNC  path  to  a  drive letter. In windows zsh and Cygwin UNC paths are
       fully supported. The current working directory can be a UNC path.

       Remark about 8 bit characters: Only the original equipment manufacturer
       (OEM)  code  page installed with Windows appears correctly in a command
       prompt window that uses Raster fonts. Other code pages appear correctly
       in  full-screen mode or command prompt windows that use TrueType fonts.

FILES

       wcd.exe
           The binary. Do not rename it to ’wcd’ on Unix systems. In a Bourne-
           like or C shell the binary is always called by a function or alias,
           because the current working directory of a Bourne-like or  C  shell
           can  only  be  changed  by the builtin cd command. See also section
           INSTALLATION.

       default treedata file
           DOS: \treedata.wcd or %HOME%\treedata.wcd
           UNIX: $HOME/.treedata.wcd

           This is the default treedata file where wcd searches  for  matches.
           If it is not readable wcd will create a new one.

       extra treedata file
           DOS: \extra.wcd or %HOME%\extra.wcd
           UNIX: $HOME/.extra.wcd

           An  optional  extra treedata file. If it exists and is readable wcd
           will try to find matches in this file also.

       ban file
           DOS: \ban.wcd or %HOME%\ban.wcd
           UNIX: $HOME/.ban.wcd

           In this optional file wcd  places  banned  paths.  See  option  -b.
           Wildcards are supported.

       alias file
           DOS: \alias.wcd or %HOME%\alias.wcd
           UNIX: $HOME/.alias.wcd

           Optional file with wcd aliases. See option -l.

       stack file
           DOS: c:\stack.wcd or %HOME%\stack.wcd
           UNIX: $HOME/.stack.wcd

           In this file wcd stores it’s stack. The drive-letter can be changed
           with the -d option.

       go-script
           DOS BASH: c:\wcd.go or %HOME%\wcd.go
           WIN32 CONSOLE: c:\wcdgo.bat or %HOME%\wcdgo.bat
           WIN32 ZSH: %HOME%\wcd.go
           UNIX: $HOME/bin/wcd.go

           This is the shell script which wcd.exe creates each  time.   It  is
           sourced via a function or an alias. The drive-letter can be changed
           with the -d option.  For history reasons it is placed by default in
           ~/bin  on  Unix systems.  The directory of this file can be changed
           with the option -G.

       relative treedata file
           DOS: <path>\rtdata.wcd
           UNIX: <path>/.rtdata.wcd

           Text file with relative paths from <path>. See options +S,  -n  and
           +n.

       The  win32  console  version  of  wcd  behaves as the DOS version.  The
       Cygwin version of wcd behaves as the UNIX version.

       All .wcd files are ASCII text files. They can be edited  with  a  text-
       editor.

       If the environment variable WCDHOME is set wcd will use WCDHOME instead
       of HOME.

OPTIONS

       -A <path>
              Add directory tree from <path> to default treedata.

              The directory tree starting  from  <path>  is  appended  to  the
              default treedata file.

                  Example: wcd -A .

              On  Windows one can scan all shared directories of a Windows LAN
              server by typing something like: wcd -A \\servername.

       -a     Add current path to default treedata file.

              Use this option to quickly add the current path to  the  default
              treedata  file.  Re-scanning  the  complete disk can take a long
              time in some cases.

       -aa    Add current and all parent paths to default treedata.

       -b     Ban current path.

              Wcd places the current path in the ban file. This means that wcd
              ignores all matches of this directory and its sub directories.

              The  ban file can be edited with a text editor. Use of wildcards
              are supported and it is matched against absolute path.

              Banned paths are not excluded from scanning  the  disk.   To  do
              that use option -xf.

       -c     direct CD mode

              By default wcd works as follows:
               1. Try to find a match in the treedata file(s)
               2. If no match, try to open the directory you typed.

               In direct CD mode wcd works in reversed order.
               1. Try to open the directory you typed.
               2. If not, try to find a match in the treedata file(s).

       -d <drive>
              Set drive for stack and go file (DOS only).

              The  stack file and the go-script are by default stored on drive
              c: if environment variable HOME is not set. Use this  option  if
              drive  C:  is  a  read-only  drive.  This option must be used in
              front of the stack options -, + and =.

       -E <path>
              Add directory tree from <path> to Extra treedata file.

              The directory tree starting from <path> is appended to the Extra
              treedata file

       -e     Add current path to extra treedata file.

              Use  this  option  to  quickly add the current path to the extra
              treedata file.

       -ee    Add current and all parent paths to extra treedata file.

       -f <filename>
              Add another treedata file to be scanned, do not include your own
              treedata file.

       +f <filename>
              Add  another  treedata  file  to  be  scanned,  include your own
              treedata file.

       -G <path>
              Set directory path of go-script.

       -GN    Don’t create go-script.

              This option can be used in combination with the option -j if one
              doesn’t want wcd to create a go-script.

       -g     Graphical interface (only in version with curses interface).

              Wcd  starts  a  textual curses based ‘graphical’ interface.  The
              user can  select  a  directory  via  a  full-screen  interactive
              directory  browser.  It  has  a Vi(m) like navigation and search
              method.

              If no search string is given wcd presents the whole  tree  which
              is in the default treedata file and the extra treedata files.

              If  a  search  string  is given the match list is presented as a
              graphical tree.

       -ga    Graphical interface with alternative  way  of  navigating.  With
              this option one can’t jump to unrelated directories.

       -gd    Dump the treedata files as a tree to stdout.

       -i     Ignore  case.   Dos  and  Windows versions of wcd ignore case by
              default. Unix versions regard case by default.

       +i     Regard case.  See also option -i.

       -j     just go mode

              In this mode wcd will not present a list when there is more than
              directory  that  matches  the  given  directory.   Wcd will just
              change to the first option. When wcd is invoked again  with  the
              same arguments it will change to the next option, and so on.

              Wcd will print the directory to go to to stdout.  So a different
              installation method can be used.  One could make  the  following
              function for bash or ksh:

              function wcd()
              {
                cd "‘$HOME/bin/wcd.exe -j $*‘"
              }

              On  windows systems, if one is running 4NT shell, one could make
              the following alias:

              alias wcd ‘cd %@execstr[wcdwin32.exe -z 0 -j %1]‘

              This method eliminates the need of the go-script, so one can use
              option -GN in combination with -j.

       -k     Keep paths.

              Keep  paths  in  treedata  when  wcd cannot change to them.  The
              default behaviour of wcd is that it tries to remove  paths  from
              the  treedata  when wcd cannot change to them.  With this option
              this behaviour is turned off.

       -l     aLias current path.

              Wcd places the current path and the alias  in  the  alias  file.
              Aliases are case sensitive.

       -M <dir>
              Make directory and add to extra treedata file.

       -m <dir>
              Make directory and add to treedata file.

       -N     Use numbers instead of letters.

              Wcd  with  a  conio  or  curses  based  interface  (see  section
              INTERFACE) presents a match list default numbered with  letters.
              When  the  -N  option  is  used  the match list is numbered with
              numbers.  Regardless of the -N option one can type a  letter  or
              numbers to make a selection from the list of matches.

       -n <path>
              Add  relative  treedata  file  (Unix:  <path>/.rtdata.wcd,  DOS:
              <path>\rtdata.wcd), do not scan the default  treedata  file.  If
              <path>   is   a   file,   wcd   will   add   <path>  instead  of
              <path>/.rtdata.wcd or <path>\rtdata.wcd.  See also option +S.

              Example:
              suppose another system has  been  NFS  mounted  to  mount  point
              /mnt/network

                    wcd -n /mnt/network src

              Wcd  now  opens  file /mnt/network/.rtdata.wcd The file contains
              the paths relative from that point.

              The relative treedata file  should  already  have  been  created
              using the wcd +S option.

       +n <path>
              Add another relative treedata file. See option -n.

       -o     Use stdin/stdout interface.

              When  for  some  kind of reason the conio or curses interface of
              wcd doesn’t work one can fall back to the stdin/stdout interface
              of wcd by using the -o option.

       -od    Dump all matches to stdout.

       -Q     Quieter operation.

              Printing of the final match is suppressed.

       -r <dir>
              Remove directory and remove from treedata file.

              If the directory is empty, wcd will remove it, and try to remove
              it from the treedata file.

       -rmtree <dir>
              Recursively remove directory and remove from treedata file.

              Wcd will remove the directory and all it’s sub  directories  and
              files, and remove the directories from the treedata file.

       -S <path>
              Scan disk from a certain path.

              If  you  have a small Unix system like a PC with a few users you
              can for instance  scan  the  disk  from  /.   With  the  Windows
              versions  one  can  scan all shared directories of a Windows LAN
              server by typing something like: wcd -S \\servername.

              The existing default treedata file is overwritten.

       +S <path>
              Scan disk from a certain path. Make relative treedata file.

              Scan disk from  path  <path>  and  place  relative  paths  in  a
              relative  treedata  file.   This  file  is used by the -n and +n
              options of wcd. E.g.  wcd -n <path> src

       -s     (re)Scan disk from your $HOME directory.

              This is recommended if you are on a large  Unix  server  network
              with  very  much users.  This is the default scanning mode.  Wcd
              for DOS scans the current disk from root \  or  from  %HOME%  if
              HOME is set.  The existing default treedata file is overwritten.

       -t     Do not strip tmp mount dir /tmp_mnt (Unix only)

              Wcd strips  by  default  /tmp_mnt/  from  the  match.  Directory
              /tmp_mnt  is  used  by  the  automounter.  This behaviour can be
              turned off with the -t option.

       -u <username>
              Add default treedata file of other user, do not include your own
              default treedata file.

              Wcd now scans the treedata file of another user On Unix the base
              directory for user home directores is assumed to be /home  ,  so
              wcd    tries   to   scan   /home/<username>/.treedata.wcd.    On
              DOS/Windows the base  directory  for  user  home  directores  is
              assumed    to    be   \\users   ,   so   wcd   tries   to   scan
              \\users\<username>\treedata.wcd.

              One can define  a  different  base  directory  with  environment
              variable WCDUSERSHOME.  See section ENVIRONMENT.

       +u <username>
              Add treedata file of other user, include your own treedata file.

       -V     verbose operation.

              With this option wcd prints all filters, bans and excludes.

       -v     Print version info.

       -w     Wild matching only.

              Treat all matches as wild matches.

       -x <path>
              Exclude <path> from scanning.

              When this option is used wcd will exclude  <path>  and  all  its
              subdirectories  when  wcd  is  scanning  a  disk.  Wildcards are
              supported and matched against absolute paths. Option -x  can  be
              used multiple times.

                wcd -x <path1> -x <path2> -s

              Option  -x must be used in front of any scan option (-s, -S, +S,
              -A, -E).

              On  DOS/Windows  systems  one  must  specify  the  drive  letter
              depending  on if enviroment variable HOME or WCDHOME is set.  If
              HOME or WCDHOME is set one needs to specify  the  drive  letter.
              Example:

                wcd -x c:/temp -S c:

              Otherwise don’t specify drive letter.

                wcd -x /temp -s

       -xf <file>
              Exclude all paths listed in <file> from scanning.

              When  this  option  is used wcd will exclude all paths listed in
              <file> and all their subdirectories when wcd is scanning a disk.
              Wildcards  are  supported  and they are matched against absolute
              paths; one path per line.  Be aware that  wcd  will  not  ignore
              leading  or  trailing  blanks  on a line, because they are legal
              characters in a directory name.  Option -xf can be used multiple
              times.  When  one wants to exlude all banned paths from scanning
              one can do the following (example for wcd on unix):

                wcd -xf ~/.ban.wcd -s

              Wildcards are supported. For instance to exclude  all  your  CVS
              directories with cvs administrative files add a line with:
              */CVS

              Option -xf must be used in front of any scan option (-s, -S, +S,
              -A, -E).

       -z #   Set maximum stack size.

              The default size of the stack is  10.  Stack  operation  can  be
              turned  off  by setting the size to 0.  This option must be used
              in front of any other stack option (-,+,=).  Otherwise the  size
              of  the  stack  will  be  set  back to the default 10. A correct
              command is:

                wcd -z 50 -

              The new stack size will be 50, wcd will go one  directory  back.
              A wrong command is:

                wcd - -z 50

              Wcd goes one directory back, the stack gets the default size 10.
              ’-z 50’ is ignored.

              Add this option as  the  first  option  to  your  wcd  alias  or
              function.  E.g. for the bash this would be:

              function wcd
              {
                 wcd.exe -z 50 $*
                 . $HOME/bin/wcd.go
              }

       -[#]   Push dir [ # times ].

              Go back a directory. ’wcd -’ goes one directory back. To go more
              directories back add a number to it. E.g. wcd -3  The  stack  is
              cyclic.

       +[#]   Pop dir [ # times ].

              Go  forward  a directory. ’wcd +’ goes one directory forward. To
              go more directories forward add a number to it. E.g. wcd +2  The
              stack is cyclic.

       =      Show stack.

              Use  this option if don’t know anymore how many times to push or
              pop.  The stack is printed and you  can  choose  a  number.  The
              current place in the stack is marked with an asterisk ’*’.

INTERFACE

       Wcd  has  three  different interfaces to choose from a list of matches.
       The interface can be chosen at compile time.

       The first interface  uses  plain  stdin/stdout.   A  numbered  list  is
       printed in the terminal. The user has to choose from the list by typing
       a number followed by <Enter>.  This interface does not  provide  scroll
       back  functionality in case of a long list.  The scroll back capability
       of the terminal/console has to be used.  It is very small and portable.

       The  second  interface  is  built with the conio library. It provides a
       builtin scroll back capability.  The user is presented a list  numbered
       with  letters.   Choosing  from a list can be done by pressing just one
       letter.  This interface  is  fast  because  it  saves  keystrokes.   If
       possible the screen will be restored after exiting.  One who prefers to
       type numbers can use the -N option.  This interface is  meant  for  DOS
       systems.

       The  third interface is built with the curses library. It is similar to
       the conio interface with additional  sideways  scrolling.   The  curses
       version  of  wcd has also an additional graphical interface.  It lets
       the user select a directory via  a  full-screen  interactive  directory
       browser.  It  has  a Vi(m) like navigation and search method. It can be
       activated with option -g.  This interface is portable to  DOS,  Windows
       and Unix.

       By  using  the  -o  option one can always fall back to the stdin/stdout
       interface.

ENVIRONMENT

       HOME and WCDHOME
           Wcd uses environment variable HOME to determine where to store  its
           files.  See  also  section  FILES.   Environment  variable  WCDHOME
           overrides HOME. If both HOME and WCDHOME are set, WCDHOME  will  be
           used instead of HOME.

           For the Unix and Cygwin version it is required that HOME or WCDHOME
           is set. For the other versions of wcd the use of these variables is
           optional.

       TERMINFO
           If  the  environment variable TERMINFO is defined, wcd with ncurses
           interface checks for a local terminal definition before checking in
           the  standard place. This is useful if terminal definitions are not
           on   a   standard   place.   Often   used   standard   places   are
           /usr/lib/terminfo and /usr/share/terminfo.

       PDC_RESTORE_SCREEN
           Wcd  with  PDCurses  interface  recognizes the environment variable
           PDC_RESTORE_SCREEN.  If this environment variable is set,  PDCurses
           will take a copy of the contents of the screen at the time that wcd
           is started; when wcd exits, the screen will be  restored.  One  can
           set this variable e.g. in AUTOEXEC.BAT. Example:

              set PDC_RESTORE_SCREEN=1

           For Cygwin this would be ’export PDC_RESTORE_SCREEN=1’.

           Windows allows only a small buffer to be saved. So it is not always
           possible to restore everything. Some garbage data may be printed in
           the  console after wcd exists if you have set a large buffer width.

       SHELL
           Printing of #!$SHELL on the first line of the go-script for Bourne-
           like  or  C  shell  is  needed  for  8  bit characters. Some shells
           otherwise think that the go-script is a binary file  and  will  not
           source  it.  In  Cygwin  bash one may need to define $SHELL with an
           ’export’ command, otherwise wcd can’t read the variable.

       BASH
           Wcd for DOS bash uses $BASH instead of $SHELL, because $SHELL point
           to  the  DOS  command  shell.  One may need to define $BASH with an
           ’export’ command, otherwise wcd can’t read the variable.

       WCDFILTER
           Specify  filters  with   environment   variable   WCDFILTER.    All
           directories that don’t match the filter(s) are ignored.  A list can
           be specified by separating filters with colons (:)  on  Unix/Cygwin
           and  semicolons  (;)  on DOS/Windows systems (Similar as specifying
           the PATH variable). Filters are case sensitive  on  Unix  and  case
           insensitive on DOS/Windows.

           Example Unix: export WCDFILTER=projects:doc

           Example DOS/Windows: set WCDFILTER=projects;doc

       WCDBAN
           The  paths specified with environment WCDBAN will be banned by wcd.
           See also option -b. Specify a list of paths separated by colons  on
           Unix/Cygwin and semicolons on DOS/Windows.

       WCDEXCLUDE
           The paths specified with environment WCDEXCLUDE will be excluded by
           wcd. See also options -x and -xf. Specify a list of paths separated
           by colons on Unix/Cygwin and semicolons on DOS/Windows.

           Example Unix: export WCDEXCLUDE=/dev:/tmp:*CVS

           Example DOS/Windows: set WCDEXCLUDE=*/windows;*/temp;*CVS

       WCDUSERSHOME
           With  this  variable one can set the base directory where the users
           home directories are.  If this variable is not set wcd will  assume
           /home  on  Unix, and \\users on DOS/Windows.  This variable is used
           to scan treedata files of other users. See also options -u an +u.

       In verbose mode wcd will print all  filters,  bans  and  excludes.  See
       option -V.

INSTALLATION

       Note that the current working directory of a Bourne-like or C shell can
       only be changed by the builtin cd  command.  Therefore  the  binary  is
       always  called  by a function or alias. The function or alias sources a
       shell script (go-script) which is generated by the binary wcd.exe.  Wcd
       can only work after the function or alias is defined.

       The following sections give brief information on how to install wcd. Do
       you want to know more? Read file  wcd.txt  which  comes  with  the  wcd
       distribution.

INSTALLATION DOS VERSION

       16 bit version:
       Make sure that wcd.exe is in your path.

       32 bit version:
       Make sure that wcd.exe and cwsdpmi.exe are in your path.

       DOS Bourne Again Shell
       make a function like this:

       function wcd
       {
          c:/bin/wcd.exe $*
          . c:/wcd.go
       }

       File  wcd.go  is always written to drive c: unless other specified with
       the -d option.

       If you use environment variable HOME make a function like this:

       function wcd
       {
          c:/bin/wcd.exe $*
          . $HOME/wcd.go
       }

       Z Shell

       The dos bash version of wcd can also be used for the win32 port of  zsh
       if  it  is used under Windows 95 or 98. It is required that environment
       variable HOME or WCDHOME is set. A function like the following must  be
       defined.  This can be done in $HOME/.zshenv

       function wcd
       {
          c:/bin/wcd.exe $*
          . $HOME/wcd.go
       }

INSTALLATION WIN32 CONSOLE VERSION

       Notice  that  under  Windows NT console (MS-DOS prompt) a win32-program
       cannot change the current work directory (although a DOS-program  can).
       That   is   why   wcd   generates   a  batch  script  (c:\wcdgo.bat  or
       %HOME%\wcdgo.bat) which must be executed in the current shell.

       1) Copy wcd.bat and wcdwin32.exe somewhere in PATH.

       2) Edit wcd.bat depending if you use environment variable HOME or  not.

       Suppose you installed wcd in c:\bin

       If you don’t use environment variable HOME wcd.bat looks like:

        @echo off
        c:\bin\wcdwin32.exe %*
        c:\wcdgo.bat

       If you do use environment variable HOME wcd.bat looks like:

        @echo off
        c:\bin\wcdwin32.exe %*
        %HOME%\wcdgo.bat

       3)  To  be  sure  that  you  execute  the  correct  ’wcd.bat’ you could
       optionally create a macro for wcd:

        doskey wcd=c:\bin\wcd.bat $*

       Notice that environment variable WCDHOME overrides HOME.

       Z Shell

       A   win32   port   of   zsh   has   been   made   by   Amol   Deshpande
       (ftp://ftp.blarg.net/users/amol/zsh).

       It  is  required  that  environment variable HOME or WCDHOME is set.  A
       function must be defined (e.g. in $HOME/.zshenv) like this:

       function wcd
       {
          c:/bin/wcdwin32.exe $*
          . $HOME/wcd.go
       }

INSTALLATION CYGWIN VERSION

       The Cygwin version behaves exactly as the Unix version: Regards case by
       default, same file names, etc.

       1)

       Make sure that environment variable HOME is set.
       Create a directory $HOME/bin

       2)

       copy wcd.exe to your $HOME/bin directory.

       3)

       Add the following function to your ~/.bashrc file.

       function wcd
       {
          $HOME/bin/wcd.exe $*
          . $HOME/bin/wcd.go
       }

       Start a new bash

INSTALLATION UNIX VERSION

       The  following  examples  show  the  installation on a system where you
       don’t have root privileges.  Read the man page of  the  shell  you  are
       using on how to define a function or an alias.

       ===== Bourne-like shells: =====

       Korn Shell (ksh, pdksh), Bourne Again Shell (bash), Z shell (zsh), ash,
       ...

       1)

        copy wcd.exe to your $HOME/bin directory.

       2)

        Add the following function to  a  startup  file  of  your  shell.  For
       instance in:
       $HOME/.kshrc (ksh)
       $HOME/.bashrc (bash)
       $HOME/.zshenv (zsh)

       function wcd
       {
          $HOME/bin/wcd.exe $*
          . $HOME/bin/wcd.go
       }

       Start a new shell

       ===== C Shell (csh): =====

       1)

        copy wcd.exe to your $HOME/bin directory.

       2)

        Add the following alias to your $HOME/.cshrc
        file.

       alias wcd "$HOME/bin/wcd.exe \!* ; source $HOME/bin/wcd.go"

       Start a new C Shell

AUTHOR

       Erwin Waterlander,
       waterlan@xs4all.nl
       http://www.xs4all.nl/~waterlan/

SEE ALSO

       ksh(1), csh(1), bash(1), zsh (1), ncurses (1)

                                     local                              WCD(7)