Provided by: freebsd-manpages_6.2-1_all
rr232x - HighPoint RocketRAID 232x device driver
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
The rr232x driver provides support for HighPoint’s RocketRAID 232x series
of RAID controllers. These devices support SATA disk drives and provide
RAID 0, 1, and 5 functionality. Hardware acceleration for RAID 5 is also
provided. Additionally, if multiple controllers are present, arrays may
be built out of drives that are attached to different controllers.
Online management is provided by utilities that are available for free
download from http://www.highpoint-tech.com/.
The rr232x driver supports the following hardware:
· HighPoint RocketRAID 2320
· HighPoint RocketRAID 2322
The rr232x driver only works on the i386 and amd64 platforms. Also,
while the driver can be loaded as a module, it must be loaded prior to
boot. Loading it after boot will result in the hardware not being
cam(4), loader.conf(5), loader(8)
The rr232x driver first appeared in FreeBSD 6.1.
The rr232x driver was provided by HighPoint Technologies, Inc. This
manual page was written by Scott Long 〈scottl@FreeBSD.org〉.