Provided by: xserver-xorg-input-tek4957_1.1.0-4_i386 bug

NAME

       tek4957 - Tektronix 4957 input driver

SYNOPSIS

       Section "InputDevice"
         Identifier "idevname"
         Driver "tek4957"
         Option "Device"   "devpath"
         ...
       EndSection

DESCRIPTION

       tek4957 is an Xorg input driver for the Tektronix 4957 tablet.

       The tek4957 driver functions as a pointer input device, and may be used
       as the X server’s core pointer.

CONFIGURATION DETAILS

       Please refer to xorg.conf(5) for general configuration details and  for
       options  that  can  be  used with all input drivers.  This section only
       covers configuration details specific to this driver.

               Option "Device" "devpath"
                   sets the path to the special file which  represents  serial
                   line  where  the tablet is plugged, for example /dev/ttyS0.
                   This option is mandatory.

               Option "DeviceName" "name"
                   sets the name of the X device.

               Option "Speed" "number"
                   sets the sampling rate, from 1 to 6.  Default is 6, maximum
                   speed.

               Option "Resolution" "number"
                   sets the resolution.
                       0 : 2340 dots  : 1/200 inch
                       1 : 2972 dots  : 1/10 mm
                       2 : 11700 dots : 1/1000 inch
                       3 : 11887 dots : 1/40 mm
                       4 : 5850 dots  : 1/500 inch
                       5 : 5944 dots  : 1/20 mm : default
                       6 : 4680 dots  : 1/400 inch
                       7 : 1170 dots  : 1/100 inch
                       8 : 12 dots    : 1 inch
                       9 : 24 dots    : 1/2 inch

               Option "TopX" "number"
                   X  coordinate  of  the  top  corner  of  the active zone. (
                   Default = 0 )

               Option "TopY" "number"
                   Y coordinate of the  top  corner  of  the  active  zone.  (
                   Default = 0 )

               Option "BottomX" "Inumber"
                   X  coordinate  of  the  bottom corner of the active zone. (
                   Default = full scale )

               Option "BottomY" "number"
                   Y coordinate of the bottom corner of  the  active  zone.  (
                   Default = full scale )

BUGS / LIMITATIONS

       Currently, only "Absolute" mode is supported ( Sorry )

SEE ALSO

       Xorg(1), xorg.conf(5), xorgconfig(1), Xserver(1), X(7).

AUTHORS

       Olivier DANET <odanet@caramail.com>