Provided by:
maradns_1.2.12.08-1_i386 
NAME
csv2_txt - Description of txt and raw resource records in the csv2 zone
file
DESCRIPTION
Due to the complexity of TXT and RAW records, this man page is
dedicated to describing the csv2 format of this RR.
TXT and RAW rrs in MaraDNS' csv2 zone files can store any arbitrary
binary data. Additionally, it is possible to arbitrarily divide up TXT
records in to chunks (chunks, which RFC1035 call "character-string"s,
are described below).
ASCII AND UTF-8 DATA
If a given TXT field or RAW record contains only ASCII data, creating a
record is easy: Place the full data between single quotes, like this:
a.example.com. TXT 'This is some text'
It is also possible, with two notable exceptions, to place any byte
with a value less than 0x80 (128) between quotes. If there are any
bytes with a value of 0x80 or more, the data must be UTF-8 encoded
Unicode.
The two ASCII characters not allowed in quotes are the ' character, and
the '{' character. See BACKSLASH ESCAPE SEQUENCES below for information
on adding these characters to TXT or RAW fields.
UNQUOTED DATA
Note that the record does not have to be quoted. As long as the record
only contains ASCII alphanumeric data, and/or the characters '-', '_',
'+', '%', '!', '^', and '=', the data can be unquoted as follows:
c.example.com. TXT This_is_100%_unquoted_text_+symbols!
It is also possible to mix quoted and unquoted text, such as this:
d.example.com. TXT This' is a mix 'of_unquoted' and quoted 'text!
Which will have its data look like this:
This is a mix of_unquoted and quoted text!
When mixing quoted and unquoted data, it is important to have all
whitespace inside quotes.
BACKSLASH ESCAPE SEQUENCES
In order to accommodate storing non-UTF-8 high bit characters, the
single quote character, the '{' character, and to permit multi-line
TXT/RAW records (with comments allowed mid-record), the TXT/RAW RR
allows backslashes. These backslashes only have significance outside of
quoted text; if they are placed inside single quotes, they are not
interpreted and result in a literal backslash being added to the
resource record data.
The following characters can be backslashed:
' When backslashed, the adds a literal quote to the resource record.
whitespace
When any whitespace is backslashed (space, newline, cr, and tab),
this indicates that the record has not ended, and that more data for
this recource will follow. This also allows comments to be placed in
TXT and RAW resource records. What happens is that the backslash
indicates that any whitespace characters (space, tab, carraige
return, and line feed) are to be ignored until the next non-
whitespace character that is not a # (hash). If a # is seen, this
indicates that we ignore any and all characters until the next
carriage return or line feed, and continue to ignore everything
until the next non-whitespace character. See the section on multi-
line and commented records for examples.
0123
When a number between 0 and 3 is backslashed, this indicates the
beginning of a three-digit octal number.
x When an x is backslashed, this indicates the beginning of a two-
digit hexadecimal number.
Note that, with the exception of the single quote, the backslash
character is not used to remove the meta-significance of a given
character. In particular, unlike other environments, it is not
possible to backslash spaces. Spaces can be represented either as ' '
in quotes, \x20, or as \040.
Here are some examples of backslashed data. In this example, we see
backslash sequences being used to store non-UTF-8 hi-bit data:
e.example.com. TXT \x80\x81\x82\x83
This same data can also be created as follows:
f.example.com. TXT \200\201\202\203
Octal and hex information can be mixed:
g.example.com. TXT \200\x81\202\x83
Literal single quotes can be placed in resource records:
h.example.com. TXT 'perl -e '\''print "A Perl of a TXT record!\n"'\'
The above example produces this record:
perl -e 'print "A Perl of a TXT record!\n"'
To render the '{' character, use the escape sequence \x7b (outside of
quotes). For example:
h1.example.com. TXT 'for(a=0;a<10;a++)'\x7b'printf("%d\n",a);sleep(1)}'
Produces this record:
for(a=0;a<10;a++){printf("%d\n",a);sleep(1)}
MULTI-LINE AND COMMENTED RECORDS
By utilizing backslashes followed by comments, it is possible to have
multi-line and commented TXT and RAW records. The following resource
record will span more than one line on an 80-column display:
i.example.com. TXT 'Not only did the quick brown fox jump over the lazy dog, but the lazy dog jumped over the cat.'
Without affecting this resource record, the same data can be split over
multiple lines:
j.example.com. TXT 'Not only did the quick brown fox jump '\
'over the lazy dog, but the lazy dog'\
' jumped over the cat.'
Some points:
* The backslash must be outsize of the quotes (or a literal backslash
will be added to the record)
* The backslash must be present before any unquoted white space.
Usually, the backslash is placed immediately after the quote
character.
* Unlike other environments, it does not matter whether or not there is
invisible whitespace after the backslash.
It is also possible to add comments after such a backslash as follows:
k.example.com. TXT 'Not only did the quick brown fox jump '\ # The fox
'over the lazy dog, but the lazy dog'\ # The dog
' jumped over the cat.' # The cat
Note that, since the third comment is not preceeded by a backslash,
this indicates the end of the resource record.
There can also be multiple lines dedicated to comments (and,
optionally, even blank lines) in the middle of TXT and RAW record data:
k2.example.com. TXT 'This is some data '\
# Here we have some comments followed by a blank line
# Now we have some more comments,
# followed by the rest of the data
'and this is the rest of the data'
MULTIPLE TXT CHUNKS
TXT RRs may be divided up in to multiple "chunks" (RFC1035 calls these
"character-string"s). A single chunk can be anywhere from zero to 255
bytes long. The default is to have one chunk, as follows:
o.example.com. TXT 'TXT record with only one chunk'
It is also possible to have a record with multiple chunks. Chunks are
delimited by an unquoted ';' character:
p.example.com. TXT 'This is chunk one';'This is chunk two'
Or:
q.example.com. TXT 'This is chunk one';\ # Our first chunk
This_is_chunk_two;\ # Our second chunk
'This is chunk three' # Our final chunk
Quoted ; characters simply add a ; to the record data.
If a single TXT chunk is longer than 255 bytes long, the csv2 parser
will report an error in the zone file: Single TXT chunk too long
In order to resolve this, place unquoted ; characters in the record
data so that each chunk is under 255 octets (bytes or characters) in
length.
It is possible to have zero length chunks:
r.example.com. TXT 'chunk one';;'chunk three' # Chunk two zero-length
In particular, is is possible to have zero length chunks at the
beginning and end of a TXT record:
s.example.com. TXT ;'chunk two'; # Chunks one and three zero-length
Do not place semicolons at the beginning nor end of TXT records unless
you wish to have these zero-length chunks.
Chunk support only exists for TXT records. An unquoted ; character will
cause a syntax error in a RAW record.
RAW RECORDS
With the exception of no support for chunk delimiters, and the addition
of a numeric record type before the record data, the format for RAW
records is identical to text records. For example, if we wish to have a
"Kitchen Sink" RR record, which has the 8-bit binary numbers "16", "1",
and "2", followed by the ASCII string "Kitchen sink+ data", we can
specify this in any of the following manners:
t1.example.com. RAW 40 \x10\x01\x02'Kitchen sink'\x2b' data'
t.example.com. RAW 40 \020\001\002Kitchen' sink+ data'
u.example.com. RAW 40 \x10\x01\x02Kitchen\x20sink+\x20data
v.example.com. RAW 40 \x10\001\x02\
'Kitchen sink+ data'
w.example.com. RAW 40 \x10\ # Meaning: 16
\x01\ # Coding: 1
\x02\ # Sub-coding: 2
'Kitchen sink+ data' # Data: 'Kitchen sink+ data'
LEGAL DISCLAIMER
THIS SOFTWARE IS PROVIDED BY THE AUTHORS ''AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
AUTHOR
Sam Trenholme http://www.samiam.org/