Provided by: libldap-2.4-2_2.4.7-6ubuntu3_i386 bug

NAME

       ldap.conf, .ldaprc - ldap configuration file

SYNOPSIS

       /etc/ldap/ldap.conf, .ldaprc

DESCRIPTION

       If  the  environment  variable LDAPNOINIT is defined, all defaulting is
       disabled.

       The ldap.conf configuration file is used to set system-wide defaults to
       be applied when running ldap clients.

       Users  may create an optional configuration file, ldaprc or .ldaprc, in
       their home directory which will be used  to  override  the  system-wide
       defaults  file.   The  file  ldaprc in the current working directory is
       also used.

       Additional configuration files can be specified using the LDAPCONF  and
       LDAPRC  environment  variables.   LDAPCONF  may be set to the path of a
       configuration file.  This path can  be  absolute  or  relative  to  the
       current  working  directory.   The  LDAPRC,  if  defined, should be the
       basename of a file in the current working directory or  in  the  user’s
       home directory.

       Environmental  variables  may  also  be  used to augment the file based
       defaults.  The name of the variable is the option name  with  an  added
       prefix  of  LDAP.  For example, to define BASE via the environment, set
       the variable LDAPBASE to the desired value.

       Some options are user-only.  Such options are ignored if present in the
       ldap.conf (or file specified by LDAPCONF).

OPTIONS

       The  configuration options are case-insensitive; their value, on a case
       by case basis, may be case-sensitive.

       Blank lines and lines beginning with a hash mark (‘#’) are  ignored  up
       to their end.

       Valid  lines  are  made  of an option’s name (a sequence of non-blanks,
       conventionally written in uppercase, although not  required),  followed
       by  a value.  The value starts with the first non-blank character after
       the option’s name, and terminates at the end of the  line,  or  at  the
       last  sequence  of blanks before the end of the line.  The tokenization
       of the value, if any, is delegated to the handler(s) for  that  option,
       if  any.   Quoting  values that contain blanks may be incorrect, as the
       quotes would become part of the value.  For example,

            URI  "ldap:// ldaps://"

       is incorrect, while

            URI  ldap:// ldaps://

       is correct (note the absence of the double quotes).

       A line cannot be longer than LINE_MAX, which should be more  than  2000
       bytes  on all platforms.  There is no mechanism to split a long line on
       multiple lines, either for beautification  or  to  overcome  the  above
       limit.

       The different configuration options are:

       URI <ldap[si]://[name[:port]] ...>
              Specifies  the  URI(s)  of  an  LDAP server(s) to which the LDAP
              library should connect.  The URI scheme  may  be  any  of  ldap,
              ldaps  or  ldapi,  which  refer  to LDAP over TCP, LDAP over SSL
              (TLS) and LDAP over IPC  (UNIX  domain  sockets),  respectively.
              Each server’s name can be specified as a domain-style name or an
              IP address literal.  Optionally, the server’s name can  followed
              by  a  ’:’  and the port number the LDAP server is listening on.
              If no port number is provided, the default port for  the  scheme
              is used (389 for ldap://, 636 for ldaps://).  For LDAP over IPC,
              name is the name of the socket, and no  port  is  required,  nor
              allowed;  note  that  directory  separators must be URL-encoded,
              like any other characters that  are  special  to  URLs;  so  the
              socket

                   /usr/local/var/ldapi

              must be specified as

                   ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi

              A space separated list of URIs may be provided.

       BASE <base>
              Specifies  the  default  base  DN  to  use  when performing ldap
              operations.  The base must be specified as a Distinguished  Name
              in LDAP format.

       BINDDN <dn>
              Specifies  the  default  bind  DN  to  use  when performing ldap
              operations.  The bind DN must be specified  as  a  Distinguished
              Name in LDAP format.  This is a user-only option.

       DEREF <when>
              Specifies  how  alias  dereferencing  is  done when performing a
              search. The <when> can be specified  as  one  of  the  following
              keywords:

              never  Aliases are never dereferenced. This is the default.

              searching
                     Aliases  are  dereferenced  in  subordinates  of the base
                     object, but not  in  locating  the  base  object  of  the
                     search.

              finding
                     Aliases  are  only  dereferenced  when  locating the base
                     object of the search.

              always Aliases  are  dereferenced  both  in  searching  and   in
                     locating the base object of the search.

       HOST <name[:port] ...>
              Specifies  the  name(s) of an LDAP server(s) to which the
              LDAP library should connect.  Each server’s name  can  be
              specified  as  a  domain-style  name or an IP address and
              optionally followed by a ’:’ and the port number the ldap
              server  is listening on.  A space separated list of hosts
              may be provided.  HOST is deprecated in favor of URI.

       NETWORK_TIMEOUT <integer>
              Specifies  the  timeout  (in  seconds)  after  which  the
              poll(2)/select(2)  following a connect(2) returns in case
              of no activity.

       PORT <port>
              Specifies the default port used when connecting  to  LDAP
              servers(s).  The port may be specified as a number.  PORT
              is deprecated in favor of URI.

       REFERRALS <on/true/yes/off/false/no>
              Specifies  if  the  client  should  automatically  follow
              referrals  returned  by LDAP servers.  The default is on.
              Note that the command line tools ldapsearch(1) &co always
              override this option.

       SIZELIMIT <integer>
              Specifies  a  size limit to use when performing searches.
              The number should be a non-negative  integer.   SIZELIMIT
              of zero (0) specifies unlimited search size.

       TIMELIMIT <integer>
              Specifies  a  time limit to use when performing searches.
              The number should be a non-negative  integer.   TIMELIMIT
              of  zero  (0) specifies unlimited search time to be used.
              VERSION {2|3} Specifies what version of the LDAP protocol
              should be used.

       TIMEOUT <integer>
              Specifies  a  timeout  (in  seconds) after which calls to
              synchronous LDAP  APIs  will  abort  if  no  response  is
              received.  Also used for any ldap_result(3) calls where a
              NULL timeout parameter is supplied.

SASL OPTIONS

       If OpenLDAP is built with  Simple  Authentication  and  Security
       Layer support, there are more options you can specify.

       SASL_MECH <mechanism>
              Specifies the SASL mechanism to use.  This is a user-only
              option.

       SASL_REALM <realm>
              Specifies the SASL realm.  This is a user-only option.

       SASL_AUTHCID <authcid>
              Specifies  the  authentication  identity.   This   is   a
              user-only option.

       SASL_AUTHZID <authcid>
              Specifies  the  proxy  authorization identity.  This is a
              user-only option.

       SASL_SECPROPS <properties>
              Specifies   Cyrus   SASL   security    properties.    The
              <properties>  can  be specified as a comma-separated list
              of the following:

              none   (without  any   other   properties)   causes   the
                     properties  defaults ("noanonymous,noplain") to be
                     cleared.

              noplain
                     disables mechanisms susceptible to simple  passive
                     attacks.

              noactive
                     disables mechanisms susceptible to active attacks.

              nodict disables   mechanisms   susceptible   to   passive
                     dictionary attacks.

              noanonymous
                     disables mechanisms which support anonymous login.

              forwardsec
                     requires forward secrecy between sessions.

              passcred
                     requires mechanisms which pass client  credentials
                     (and  allows mechanisms which can pass credentials
                     to do so).

              minssf=<factor>
                     specifies the minimum acceptable security strength
                     factor  as  an integer approximating the effective
                     key length used for encryption.  0 (zero)  implies
                     no  protection,  1  implies  integrity  protection
                     only, 56 allows DES or  other  weak  ciphers,  112
                     allows  triple  DES  and other strong ciphers, 128
                     allows  RC4,  Blowfish  and  other  modern  strong
                     ciphers.  The default is 0.

              maxssf=<factor>
                     specifies the maximum acceptable security strength
                     factor as an  integer  (see  minssf  description).
                     The default is INT_MAX.

              maxbufsize=<factor>
                     specifies   the  maximum  security  layer  receive
                     buffer size allowed.  0 disables security  layers.
                     The default is 65536.

TLS OPTIONS

       If  OpenLDAP  is  built  with  Transport Layer Security support,
       there are more options you can specify.  These options are  used
       when  an  ldaps://  URI is selected (by default or otherwise) or
       when the application negotiates TLS by issuing the LDAP StartTLS
       operation.

       TLS_CACERT <filename>
              Specifies  the file that contains certificates for all of
              the Certificate Authorities the client will recognize.

       TLS_CACERTDIR <path>
              Specifies  the  path  of  a   directory   that   contains
              Certificate Authority certificates in separate individual
              files.   The   TLS_CACERT   is   always    used    before
              TLS_CACERTDIR.  This parameter is ignored with GNUtls.

       TLS_CERT <filename>
              Specifies  the file that contains the client certificate.
              This is a user-only option.

       TLS_KEY <filename>
              Specifies the file that contains  the  private  key  that
              matches  the  certificate  stored  in  the TLS_CERT file.
              Currently, the private key must not be protected  with  a
              password,  so  it  is of critical importance that the key
              file is protected carefully.  This is a user-only option.

       TLS_CIPHER_SUITE <cipher-suite-spec>
              Specifies  acceptable  cipher suite and preference order.
              <cipher-suite-spec> should be a cipher specification  for
              OpenSSL, e.g., HIGH:MEDIUM:+SSLv2.

       TLS_RANDFILE <filename>
              Specifies  the  file  to  obtain  random  bits  from when
              /dev/[u]random is not available.  Generally  set  to  the
              name  of  the EGD/PRNGD socket.  The environment variable
              RANDFILE can also be used to specify the filename.   This
              parameter is ignored with GNUtls.

       TLS_REQCERT <level>
              Specifies  what  checks to perform on server certificates
              in a TLS session, if any. The <level> can be specified as
              one of the following keywords:

              never  The  client  will  not request or check any server
                     certificate.

              allow  The  server  certificate  is  requested.   If   no
                     certificate  is  provided,  the  session  proceeds
                     normally. If a bad  certificate  is  provided,  it
                     will be ignored and the session proceeds normally.

              try    The  server  certificate  is  requested.   If   no
                     certificate  is  provided,  the  session  proceeds
                     normally. If a bad certificate  is  provided,  the
                     session is immediately terminated.

              demand | hard
                     These   keywords   are   equivalent.   The  server
                     certificate is requested.  If  no  certificate  is
                     provided,  or  a  bad certificate is provided, the
                     session is immediately  terminated.  This  is  the
                     default setting.

       TLS_CRLCHECK <level>
              Specifies if the Certificate Revocation List (CRL) of the
              CA should be used to verify if  the  server  certificates
              have   not  been  revoked.  This  requires  TLS_CACERTDIR
              parameter to be  set.  This  parameter  is  ignored  with
              GNUtls.  <level> can be specified as one of the following
              keywords:

              none   No CRL checks are performed

              peer   Check the CRL of the peer certificate

              all    Check the CRL for a whole certificate chain

       TLS_CRLFILE <filename>
              Specifies the file containing  a  Certificate  Revocation
              List to be used to verify if the server certificates have
              not been revoked. This parameter is only  supported  with
              GNUtls.

ENVIRONMENT VARIABLES

       LDAPNOINIT
              disable all defaulting

       LDAPCONF
              path of a configuration file

       LDAPRC basename of ldaprc file in $HOME or $CWD

       LDAP<option-name>
              Set <option-name> as from ldap.conf

FILES

       /etc/ldap/ldap.conf
              system-wide ldap configuration file

       $HOME/ldaprc, $HOME/.ldaprc
              user ldap configuration file

       $CWD/ldaprc
              local ldap configuration file

SEE ALSO

       ldap(3), ldap_set_option(3), ldap_result(3), openssl(1), sasl(3)

AUTHOR

       Kurt Zeilenga, The OpenLDAP Project

ACKNOWLEDGEMENTS

       OpenLDAP Software is developed and maintained  by  The  OpenLDAP
       Project   <http://www.openldap.org/>.    OpenLDAP   Software  is
       derived from University of Michigan LDAP 3.3 Release.