Provided by: mutt_1.5.17+20080114-1ubuntu1_i386 bug

NAME

       muttrc - Configuration file for the Mutt Mail User Agent

DESCRIPTION

       A  mutt  configuration  file  consists of a series of “commands”.  Each
       line of the file may contain  one  or  more  commands.   When  multiple
       commands are used, they must be separated by a semicolon (“;”).

       The  hash  mark, or pound sign (“#”), is used as a “comment” character.
       You can use it to annotate your initialization file. All text after the
       comment character to the end of the line is ignored.

       Single  quotes  (“’”)  and  double  quotes  (“"”)  can be used to quote
       strings  which  contain  spaces  or  other  special  characters.    The
       difference  between  the two types of quotes is similar to that of many
       popular shell programs, namely that a single quote is used to specify a
       literal  string  (one  that  is  not interpreted for shell variables or
       quoting with a backslash [see next  paragraph]),  while  double  quotes
       indicate  a  string which should be evaluated.  For example, backquotes
       are evaluated inside of double quotes, but not single quotes.

       \ quotes the next character, just as in shells such as  bash  and  zsh.
       For  example,  if  want to put quotes (“"”) inside of a string, you can
       use “\” to force  the  next  character  to  be  a  literal  instead  of
       interpreted character.

       “\\”  means  to insert a literal “\” into the line.  “\n” and “\r” have
       their usual C meanings of linefeed and carriage-return, respectively.

       A “\” at the end of a line can be used to split commands over  multiple
       lines,  provided  that  the  split points don’t appear in the middle of
       command names.

       It is also possible to substitute the output of a Unix  command  in  an
       initialization  file.  This is accomplished by enclosing the command in
       backquotes (‘command‘).

       UNIX environment variables can be accessed like the way it is  done  in
       shells  like  sh and bash: Prepend the name of the variable by a dollar
       (“⇑”) sign.

COMMANDS

       alias [-group name [...]] key address [, address [ ... ]]
       unalias [ *  | key ]

              alias defines an alias key for the given addresses. Each address
              will be resolved into either an email address (user@example.com)
              or a named email address  (User  Name  <user@example.com>).  The
              address  may  be  specified  in  either format, or in the format
              “user@example.com  (User  Name)”.   unalias  removes  the  alias
              corresponding  to  the given key or all aliases when “*” is used
              as an argument. The optional -group argument to alias causes the
              aliased address(es) to be added to the named group.

       group [-group name] [-rx EXPR [ ... ]] [-addr address [ ... ]]
       ungroup [-group name ] [ * | [[-rx EXPR [ ... ]] [-addr address [ ... ]]]

              group  is  used  to  directly  add  either  addresses or regular
              expressions to the specified  group  or  groups.  The  different
              categories  of  arguments  to  the  group  command can be in any
              order. The flags  -rx  and  -addr  specify  what  the  following
              strings  (that cannot begin with a hyphen) should be interpreted
              as:  either  a  regular  expression   or   an   email   address,
              respectively.   ungroup  is  used to remove addresses or regular
              expressions from the specified group or groups.  The  syntax  is
              similar  to  the  group command, however the special character *
              can be used to empty a group of all of its contents.

              These address groups can also  be  created  implicitely  by  the
              alias,  lists,  subscribe  and alternates commands by specifying
              the optional -group option.

              Once defined, these address groups can be used  in  patterns  to
              search for and limit the display to messages matching a group.

       alternates [-group name] regexp [ , regexp [ ... ]]
       unalternates [ *  | regexp [ , regexp [ ... ]] ]

              alternates  is  used  to  inform  mutt about alternate addresses
              where you receive mail;  you  can  use  regular  expressions  to
              specify  alternate  addresses.   This  affects mutt’s idea about
              messages from you, and messages addressed to you.   unalternates
              removes  a regular expression from the list of known alternates.
              The -group flag causes all of the subsequent regular expressions
              to be added to the named group.

       alternative_order type[/subtype] [ ... ]
       unalternative_order [ *  | type/subtype] [...]

              alternative_order  command  permits  you  to  define an order of
              preference which is used by mutt to determine which  part  of  a
              multipart/alternative body to display.  A subtype of “*” matches
              any subtype, as does  an  empty  subtype.    unalternative_order
              removes entries from the ordered list or deletes the entire list
              when “*” is used as an argument.

       auto_view type[/subtype] [ ... ]
       unauto_view type[/subtype] [ ... ]

              This  commands  permits  you  to  specify   that   mutt   should
              automatically  convert  the  given MIME types to text/plain when
              displaying  messages.   For  this  to  work,  there  must  be  a
              mailcap(5)  entry for the given MIME type with the copiousoutput
              flag set.  A subtype of “*” matches  any  subtype,  as  does  an
              empty subtype.

       mime_lookup type[/subtype] [ ... ]
       unmime_lookup type[/subtype] [ ... ]

              This command permits you to define a list of "data" MIME content
              types for which mutt will try to determine the actual file  type
              from the file name, and not use a mailcap(5) entry given for the
              original  MIME  type.    For   instance,   you   may   add   the
              application/octet-stream MIME type to this list.

       bind map1,map2,... key function
              This  command  binds  the given key for the given map or maps to
              the given function. Multiple maps may be specified by separating
              them with commas (no whitespace is allowed).

              Valid  maps are: generic, alias, attach, browser, editor, index,
              compose, pager, pgp, postpone, mix.

              For more information on keys and functions, please  consult  the
              Mutt Manual.

       account-hook [!]regexp command
              This  hook  is  executed  whenever  you access a remote mailbox.
              Useful to adjust configuration settings to different IMAP or POP
              servers.

       charset-hook alias charset
              This  command  defines  an  alias  for a character set.  This is
              useful to properly display messages  which  are  tagged  with  a
              character set name not known to mutt.

       iconv-hook charset local-charset
              This command defines a system-specific name for a character set.
              This is useful when your system’s iconv(3)  implementation  does
              not  understand  MIME  character set names (such as iso-8859-1),
              but instead insists on being  fed  with  implementation-specific
              character  set  names  (such as 8859-1).  In this specific case,
              you’d put this into your configuration file:

              iconv-hook iso-8859-1 8859-1

       message-hook [!]pattern command
              Before mutt displays (or formats for replying or  forwarding)  a
              message which matches the given pattern (or, when it is preceded
              by an exclamation mark, does not match the pattern),  the  given
              command  is  executed.   When multiple message-hooks match, they
              are  executed   in   the  order  in  which  they  occur  in  the
              configuration file.

       folder-hook [!]regexp command
              When  mutt enters a folder which matches regexp (or, when regexp
              is preceded by an exclamation mark, does not match regexp),  the
              given command is executed.

              When  several  folder-hooks  match a given mail folder, they are
              executed in the order given in the configuration file.

       macro map key sequence [ description ]
              This command binds the given sequence of keys to the  given  key
              in  the given map or maps.  For valid maps, see bind. To specify
              multiple maps, put only a comma between the maps.

       color object foreground background [  regexp ]
       color index foreground background [  pattern ]
       uncolor index pattern [ pattern ... ]

              If your terminal supports color, these commands can be  used  to
              assign  foreground/backgound  combinations  to  certain objects.
              Valid objects are: attachment, body, bold,  header,  hdrdefault,
              index,  indicator,  markers,  message,  normal, quoted, quotedN,
              search, signature, status, tilde, tree, underline.  The body and
              header  objects  allow  you  to  restrict  the colorization to a
              regular expression.  The index  object  permits  you  to  select
              colored messages by pattern.

              Valid  colors include: white, black, green, magenta, blue, cyan,
              yellow, red, default, colorN.

       mono object attribute [ regexp ]
       mono index attribute [ pattern ]

              For terminals which don’t support color, you  can  still  assign
              attributes  to  objects.   Valid attributes include: none, bold,
              underline, reverse, and standout.

       [un]ignore pattern [ pattern ... ]
              The ignore command permits you to specify  header  fields  which
              you  usually  don’t  wish  to  see.   Any header field whose tag
              begins with an “ignored” pattern will be ignored.

              The unignore command permits you to define exceptions  from  the
              above mentioned list of ignored headers.

       lists [-group name] regexp [ regexp ... ]
       unlists regexp [ regexp ... ]
       subscribe [-group name] regexp [ regexp ... ]
       unsubscribe regexp [ regexp ... ]

              Mutt  maintains  two  lists  of mailing list address patterns, a
              list of subscribed mailing lists, and a list  of  known  mailing
              lists.   All  subscribed  mailing lists are known.  Patterns use
              regular expressions.

              The lists command adds a mailing list address  to  the  list  of
              known mailing lists.  The unlists command removes a mailing list
              from the lists of  known  and  subscribed  mailing  lists.   The
              subscribe  command adds a mailing list to the lists of known and
              subscribed mailing lists.  The unsubscribe  command  removes  it
              from  the list of subscribed mailing lists. The -group flag adds
              all of the subsequent regular expressions to the named group.

       mbox-hook [!]pattern mailbox
              When mutt changes  to  a  mail  folder  which  matches  pattern,
              mailbox  will  be used as the “mbox” folder, i.e., read messages
              will be moved to that folder when the mail folder is left.

              The first matching mbox-hook applies.

       mailboxes filename [ filename ... ]
       unmailboxes [ * | filename ... ]

              The mailboxes specifies folders which can receive mail and which
              will  be  checked  for  new  messages.   When  changing folders,
              pressing space will cycle through folders with  new  mail.   The
              unmailboxes  command is used to remove a file name from the list
              of folders which can receive mail.  If "*" is specified  as  the
              file name, the list is emptied.

       my_hdr string
       unmy_hdr field

              Using  my_hdr, you can define headers which will be added to the
              messages you compose.  unmy_hdr  will  remove  the  given  user-
              defined headers.

       hdr_order header1 header2 [ ... ]
              With  this  command, you can specify an order in which mutt will
              attempt to present headers to you when viewing messages.

       save-hook [!]pattern filename
              When a message matches  pattern,  the  default  file  name  when
              saving it will be the given filename.

       fcc-hook [!]pattern filename
              When  an outgoing message matches pattern, the default file name
              for storing a copy (fcc) will be the given filename.

       fcc-save-hook [!]pattern filename
              This command is an abbreviation for identical fcc-hook and save-
              hook commands.

       send-hook [!]pattern command
              When  composing a message matching pattern, command is executed.
              When multiple send-hooks match, they are executed in  the  order
              in which they occur in the configuration file.

       send2-hook [!]pattern command
              Whenever  a  message  matching  pattern  is  changed  (either by
              editing it or by using the compose menu), command  is  executed.
              When  multiple send2-hooks match, they are executed in the order
              in  which  they  occur  in  the  configuration  file.   Possible
              applications  include  setting  the  $sendmail  variable  when a
              message’s from header is changed.

              send2-hook execution is not triggered by  use  of  enter-command
              from the compose menu.

       reply-hook [!]pattern command
              When   replying  to  a  message  matching  pattern,  command  is
              executed.  When multiple reply-hooks match, they are executed in
              the order in which they occur in the configuration file, but all
              reply-hooks  are  matched  and   executed   before   send-hooks,
              regardless of their order in the configuration file.

       crypt-hook pattern key-id
              The  crypt-hook  command  provides  a  method  by  which you can
              specify the ID of the public key  to  be  used  when  encrypting
              messages  to a certain recipient.  The meaning of "key ID" is to
              be taken broadly: This can be  a  different  e-mail  address,  a
              numerical key ID, or even just an arbitrary search string.

       open-hook regexp "command"
       close-hook regexp "command"
       append-hook regexp "command"

              These  commands  provide a way to handle compressed folders. The
              given regexp specifies which folders  are  taken  as  compressed
              (e.g.   "\\.gz$").  The  commands  tell Mutt how to uncompress a
              folder (open-hook), compress a folder (close-hook) or  append  a
              compressed  mail  to  a  compressed  folder  (append-hook).  The
              command string is the  printf(3)  like  format  string,  and  it
              should  accept  two  parameters:  %f, which is replaced with the
              (compressed) folder name, and %t which is replaced with the name
              of the temporary folder to which to write.

       push string
              This command adds the named string to the keyboard buffer.

       set [no|inv|&|?]variable[=value] [ ... ]
       toggle variable [ ... ]
       unset variable [ ... ]
       reset variable [ ... ]

              These  commands  are  used  to  set and manipulate configuration
              varibles.

              Mutt knows four  basic  types  of  variables:  boolean,  number,
              string  and  quadoption.   Boolean  variables can be set (true),
              unset (false), or toggled. Number variables can  be  assigned  a
              positive integer value.

              String  variables consist of any number of printable characters.
              Strings must be enclosed in quotes if  they  contain  spaces  or
              tabs.   You  may also use the “C” escape sequences \n and \t for
              newline and tab, respectively.

              Quadoption variables are used to control whether or  not  to  be
              prompted for certain actions, or to specify a default action.  A
              value  of  yes  will  cause  the  action  to  be   carried   out
              automatically  as  if  you  had  answered  yes  to the question.
              Similarly, a value of no will cause the the action to be carried
              out as if you had answered “no.” A value of ask-yes will cause a
              prompt with a default answer of “yes” and ask-no will provide  a
              default answer of “no.”

              The reset command resets all given variables to the compile time
              defaults.  If you reset the special variable all, all  variables
              will reset to their compile time defaults.

       source filename
              The given file will be evaluated as a configuration file.

       spam pattern format
              nospam pattern
              These commands define spam-detection patterns from external spam
              filters, so that mutt can sort,  limit,  and  search  on  ‘‘spam
              tags’’ or ‘‘spam attributes’’, or display them in the index. See
              the Mutt manual for details.

       unhook [ *  | hook-type ]
              This command will remove all hooks of a given type, or all hooks
              when  “*”  is  used as an argument.  hook-type can be any of the
              -hook commands documented above.

PATTERNS

       In various places with mutt, including some of the abovementioned  hook
       commands, you can specify patterns to match messages.

   Constructing Patterns
       A  simple  pattern  consists  of  an operator of the form “~character”,
       possibly followed by a parameter against  which  mutt  is  supposed  to
       match  the object specified by this operator.  For some characters, the
       ~ may be replaced by another character to alter  the  behavior  of  the
       match.  These are described in the list of operators, below.

       With  some  of  these  operators,  the object to be matched consists of
       several e-mail addresses.  In these cases, the object is matched if  at
       least  one  of  these  e-mail  addresses matches. You can prepend a hat
       (“^”) character to such a pattern to indicate that all  addresses  must
       match in order to match the object.

       You  can  construct  complex patterns by combining simple patterns with
       logical operators.  Logical AND is specified  by  simply  concatenating
       two  simple patterns, for instance “~C mutt-dev ~s bug”.  Logical OR is
       specified by inserting a vertical bar (“|”) between two  patterns,  for
       instance  “~C  mutt-dev  |  ~s  bug”.   Additionally,  you can negate a
       pattern by prepending a bang (“!”) character.   For  logical  grouping,
       use braces (“()”). Example: “!(~t mutt|~c mutt) ~f elkins”.

   Simple Patterns
       Mutt understands the following simple patterns:

       ~A          all messages
       ~b EXPR     messages which contain EXPR in the message body.
       =b STRING   messages  which contain STRING in the message body. If IMAP
                   is enabled, searches for STRING on the server, rather  than
                   downloading each message and searching it locally.
       ~B EXPR     messages which contain EXPR in the whole message.
       ~c EXPR     messages carbon-copied to EXPR
       %c GROUP    messages carbon-copied to any member of GROUP
       ~C EXPR     messages either to: or cc: EXPR
       %C GROUP    messages either to: or cc: to any member of GROUP
       ~d MIN-MAX  messages with “date-sent” in a Date range
       ~D          deleted messages
       ~e EXPR     messages which contain EXPR in the “Sender” field
       %e GROUP    messages  which  contain  a member of GROUP in the “Sender”
                   field
       ~E          expired messages
       ~f EXPR     messages originating from EXPR
       %f GROUP    messages originating form any member of GROUP
       ~F          flagged messages
       ~g          PGP signed messages
       ~G          PGP encrypted messages
       ~h EXPR     messages which contain EXPR in the message header
       ~H EXPR     messages with spam tags matching EXPR
       ~i EXPR     messages which match EXPR in the “Message-ID” field
       ~k          messages containing PGP key material
       ~l          messages addressed to a  known  mailing  list  (defined  by
                   either subscribe or list)
       ~L EXPR     messages either originated or received by EXPR
       %L GROUP    messages  either  originated  or  received by any member of
                   GROUP
       ~m MIN-MAX  message in the range MIN to MAX
       ~n MIN-MAX  messages with a score in the range MIN to MAX
       ~N          new messages
       ~O          old messages
       ~p          messages addressed to you (as defined by alternates)
       ~P          messages from you (as defined by alternates)
       ~Q          messages which have been replied to
       ~r MIN-MAX  messages with “date-received” in a Date range
       ~R          read messages
       ~s EXPR     messages having EXPR in the “Subject” field.
       ~S          superseded messages
       ~t EXPR     messages addressed to EXPR
       ~T          tagged messages
       ~u          messages addressed to a subscribed mailing list (defined by
                   subscribe commands)
       ~U          unread messages
       ~v          message is part of a collapsed thread.
       ~V          cryptographically verified messages
       ~x EXPR     messages which contain EXPR in the “References” field
       ~X MIN-MAX  messages with MIN - MAX attachments
       ~y EXPR     messages which contain EXPR in the “X-Label” field
       ~z MIN-MAX  messages with a size in the range MIN to MAX
       ~=          duplicated messages (see $duplicate_threads)
       ~$          unreferenced message (requries threaded view)
       ~(PATTERN)  messages  in threads containing messages matching a certain
                   pattern, e.g. all threads  containing  messages  from  you:
                   ~(~P)

       In the above, EXPR is a regular expression.

       With  the  ~m, ~n, ~X, and ~z operators, you can also specify ranges in
       the forms <MAX, >MIN, MIN-, and -MAX.

   Matching dates
       The ~d and ~r operators are  used  to  match  date  ranges,  which  are
       interpreted to be given in your local time zone.

       A  date  is  of  the  form DD[/MM[/[cc]YY]], that is, a two-digit date,
       optionally followed by a two-digit month, optionally followed by a year
       specifications.   Omitted fields default to the current month and year.

       Mutt understands either two or four digit  year  specifications.   When
       given  a  two-digit  year,  mutt  will interpret values less than 70 as
       lying in the 21st century (i.e., “38” means 2038 and not 1938, and “00”
       is  interpreted  as  2000),  and  values greater than or equal to 70 as
       lying in the 20th century.

       Note that this behaviour is Y2K compliant, but that mutt  does  have  a
       Y2.07K problem.

       If  a  date  range  consists of a single date, the operator in question
       will match that precise date.  If the date range  consists  of  a  dash
       (“-”), followed by a date, this range will match any date before and up
       to the date given.  Similarly, a date followed by a  dash  matches  the
       date  given  and  any  later  point of time.  Two dates, separated by a
       dash, match any date which lies in the given range of time.

       You can also modify any absolute date by giving  an  error  range.   An
       error  range  consists  of one of the characters +, -, *, followed by a
       positive number, followed by one of the unit characters y, m, w, or  d,
       specifying  a  unit  of years, months, weeks, or days.  + increases the
       maximum date matched by the given interval of  time,  -  decreases  the
       minimum date matched by the given interval of time, and * increases the
       maximum date and decreases  the  minimum  date  matched  by  the  given
       interval of time.  It is possible to give multiple error margins, which
       cumulate.  Example: 1/1/2001-1w+2w*3d

       You can also specify offsets relative to the current date.   An  offset
       is  specified  as one of the characters <, >, =, followed by a positive
       number, followed by one of the unit  characters  y,  m,  w,  or  d.   >
       matches  dates  which  are  older than the specified amount of time, an
       offset which begins with the character < matches dates which  are  more
       recent  than  the  specified amount of time, and an offset which begins
       with the character = matches points of time  which  are  precisely  the
       given amount of time ago.

CONFIGURATION VARIABLES

       abort_nosubject
              Type: quadoption
              Default: ask-yes

              If  set  to yes, when composing messages and no subject is given
              at the subject prompt, composition will be aborted.  If  set  to
              no,  composing  messages  with  no  subject given at the subject
              prompt will never be aborted.

       abort_unmodified
              Type: quadoption
              Default: yes

              If set  to  yes,  composition  will  automatically  abort  after
              editing  the  message  body  if  no changes are made to the file
              (this check only happens after the  first  edit  of  the  file).
              When set to no, composition will never be aborted.

       alias_file
              Type: path
              Default: “~/.muttrc”

              The  default  file  in  which  to  save  aliases  created by the
              “create-alias” function.

              Note: Mutt will not automatically source  this  file;  you  must
              explicitly use the “source” command for it to be executed.

              The  default  for this option is the currently used muttrc file,
              or “~/.muttrc” if no user muttrc was found.

       alias_format
              Type: string
              Default: “%4n %2f %t %-10a   %r”

              Specifies the format of the data displayed for the ‘alias’ menu.
              The following printf(3)-style sequences are available:

              %a     alias name
              %f     flags - currently, a ”d” for an alias marked for deletion
              %n     index number
              %r     address which alias expands to
              %t     character which indicates if  the  alias  is  tagged  for
                     inclusion

       allow_8bit
              Type: boolean
              Default: yes

              Controls  whether  8-bit data is converted to 7-bit using either
              Quoted- Printable or Base64 encoding when sending mail.

       allow_ansi
              Type: boolean
              Default: no

              Controls whether ANSI color codes in messages (and color tags in
              rich  text messages) are to be interpreted.  Messages containing
              these codes are rare, but if this option is set, their text will
              be  colored  accordingly. Note that this may override your color
              choices, and even present a security problem,  since  a  message
              could  include a line like ”[-- PGP output follows ...” and give
              it the same color as your attachment color.

       arrow_cursor
              Type: boolean
              Default: no

              When set, an arrow (“->”) will be used to indicate  the  current
              entry  in menus instead of highlighting the whole line.  On slow
              network or modem links this will make  response  faster  because
              there  is  less that has to be redrawn on the screen when moving
              to the next or previous entries in the menu.

       ascii_chars
              Type: boolean
              Default: no

              If set, Mutt will use plain  ASCII  characters  when  displaying
              thread   and  attachment  trees,  instead  of  the  default  ACS
              characters.

       askbcc
              Type: boolean
              Default: no

              If  set,  Mutt  will  prompt  you  for  blind-carbon-copy  (Bcc)
              recipients before editing an outgoing message.

       askcc
              Type: boolean
              Default: no

              If  set,  Mutt  will  prompt you for carbon-copy (Cc) recipients
              before editing the body of an outgoing message.

       assumed_charset
              Type: string
              Default: “”

              This variable is a colon-separated list  of  character  encoding
              schemes  for  messages  without  character  encoding indication.
              Header field values and message body content  without  character
              encoding  indication  would  be assumed that they are written in
              one of this list.  By default, all the header fields and message
              body  without  any  charset indication are assumed to be in ”us-
              ascii”.

              For example, Japanese users might prefer this:

              set assumed_charset=”iso-2022-jp:euc-jp:shift_jis:utf-8”

              However, only the first content is valid for the message body.

       attach_charset
              Type: string
              Default: “”

              This variable is a colon-separated list  of  character  encoding
              schemes  for  text  file  attachments.  If unset, $charset value
              will be used instead.  For example, the following  configuration
              would work for Japanese text handling:

              set attach_charset=”iso-2022-jp:euc-jp:shift_jis:utf-8”

              Note: ”iso-2022-*” must be put at the head of the value as shown
              above if included.

       attach_format
              Type: string
              Default: “%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] ”

              This variable describes the format  of  the  ‘attachment’  menu.
              The following printf-style sequences are understood:

              %C     charset
              %c     requires charset conversion (n or c)
              %D     deleted flag
              %d     description
              %e     MIME content-transfer-encoding
              %f     filename
              %I     disposition (I=inline, A=attachment)
              %m     major MIME type
              %M     MIME subtype
              %n     attachment number
              %Q     ”Q”, if MIME part qualifies for attachment counting
              %s     size
              %t     tagged flag
              %T     graphic tree characters
              %u     unlink (=to delete) flag
              %X     number  of  qualifying  MIME  parts  in this part and its
                     children  (please  see  the  “attachments”  section   for
                     possible speed effects)
              %>X    right  justify  the  rest  of  the  string  and  pad with
                     character ”X”
              %|X    pad to the end of the line with character ”X”
              %*X    soft-fill with character ”X” as pad

              For an  explanation  of  ‘soft-fill’,  see  the  “$index_format”
              documentation.

       attach_sep
              Type: string
              Default: “\n”

              The separator to add between attachments when operating (saving,
              printing, piping, etc) on a list of tagged attachments.

       attach_split
              Type: boolean
              Default: yes

              If this variable is unset,  when  operating  (saving,  printing,
              piping,  etc)  on  a  list  of  tagged  attachments,  Mutt  will
              concatenate the attachments and will operate on them as a single
              attachment.  The  “$attach_sep”  separator  is  added after each
              attachment. When set, Mutt will operate on the  attachments  one
              by one.

       attribution
              Type: string
              Default: “On %d, %n wrote:”

              This  is  the  string that will precede a message which has been
              included  in  a  reply.   For  a   full   listing   of   defined
              printf()-like sequences see the section on “$index_format”.

       autoedit
              Type: boolean
              Default: no

              When  set along with “$edit_headers”, Mutt will skip the initial
              send-menu and allow you to immediately begin editing the body of
              your message.  The send-menu may still be accessed once you have
              finished editing the body of your message.

              Also see “$fast_reply”.

       auto_tag
              Type: boolean
              Default: no

              When set, functions in the index menu  which  affect  a  message
              will be applied to all tagged messages (if there are any).  When
              unset, you must first use the tag-prefix function (default: ”;”)
              to make the next function apply to all tagged messages.

       beep
              Type: boolean
              Default: yes

              When  this variable is set, mutt will beep when an error occurs.

       beep_new
              Type: boolean
              Default: no

              When this variable is set, mutt will beep whenever it  prints  a
              message  notifying  you of new mail.  This is independent of the
              setting of the “$beep” variable.

       bounce
              Type: quadoption
              Default: ask-yes

              Controls whether you will be asked to confirm bouncing messages.
              If  set  to  yes  you  don’t  get  asked if you want to bounce a
              message. Setting this variable to no is  not  generally  useful,
              and  thus  not  recommended,  because  you  are unable to bounce
              messages.

       bounce_delivered
              Type: boolean
              Default: yes

              When this  variable  is  set,  mutt  will  include  Delivered-To
              headers when bouncing messages.  Postfix users may wish to unset
              this variable.

              Note: On Debian systems, this option  is  unset  by  default  in
              /etc/Muttrc.

       braille_friendly
              Type: boolean
              Default: no

              When  this  variable  is  set, mutt will place the cursor at the
              beginning  of  the  current  line  in  menus,  even   when   the
              arrow_cursor  variable  is  unset,  making  it  easier for blind
              persons using Braille  displays  to  follow  these  menus.   The
              option  is  disabled  by  default  because many visual terminals
              don’t permit making the cursor invisible.

       check_mbox_size
              Type: boolean
              Default: no

              When this variable is set, mutt will  use  file  size  attribute
              instead of access time when checking for new mail.

       charset
              Type: string
              Default: “”

              Character  set  your  terminal uses to display and enter textual
              data.  It is also the fallback for $send_charset.

       check_new
              Type: boolean
              Default: yes

              Note: this option only affects maildir and MH style mailboxes.

              When set, Mutt will check  for  new  mail  delivered  while  the
              mailbox  is  open.  Especially with MH mailboxes, this operation
              can  take  quite  some  time  since  it  involves  scanning  the
              directory  and  checking each file to see if it has already been
              looked at.  If check_new is unset, no  check  for  new  mail  is
              performed while the mailbox is open.

       collapse_unread
              Type: boolean
              Default: yes

              When  unset,  Mutt will not collapse a thread if it contains any
              unread messages.

       uncollapse_jump
              Type: boolean
              Default: no

              When set, Mutt will jump to the next  unread  message,  if  any,
              when the current thread is uncollapsed.

       compose_format
              Type: string
              Default: “-- Mutt: Compose  [Approx. msg size: %l   Atts: %a]%>-”

              Controls  the format of the status line displayed in the Compose
              menu.  This string is similar to “$status_format”, but  has  its
              own set of printf()-like sequences:

              %a     total number of attachments
              %h     local hostname
              %l     approximate size (in bytes) of the current message
              %v     Mutt version string

              See  the  text  describing  the “$status_format” option for more
              information on how to set “$compose_format”.

       config_charset
              Type: string
              Default: “”

              When defined, Mutt will recode commands in rc  files  from  this
              encoding.

       confirmappend
              Type: boolean
              Default: yes

              When  set,  Mutt  will  prompt  for  confirmation when appending
              messages to an existing mailbox.

       confirmcreate
              Type: boolean
              Default: yes

              When set, Mutt will prompt for confirmation when saving messages
              to a mailbox which does not yet exist before creating it.

       connect_timeout
              Type: number
              Default: 30

              Causes  Mutt  to  timeout a network connection (for IMAP or POP)
              after this many seconds if the connection  is  not  able  to  be
              established.   A negative value causes Mutt to wait indefinitely
              for the connection to succeed.

       content_type
              Type: string
              Default: “text/plain”

              Sets the default Content-Type for the  body  of  newly  composed
              messages.

       copy
              Type: quadoption
              Default: yes

              This  variable  controls  whether or not copies of your outgoing
              messages  will  be  saved  for  later  references.    Also   see
              “$record”, “$save_name”, “$force_name” and “fcc-hook”.

       crypt_use_gpgme
              Type: boolean
              Default: no

              This  variable  controls  the  use  of  the GPGME-enabled crypto
              backends.  If it is set and Mutt was built with  gpgme  support,
              the  gpgme  code  for S/MIME and PGP will be used instead of the
              classic code.  Note that you need to set this option in .muttrc;
              it won’t have any effect when used interactively.

       crypt_use_pka
              Type: boolean
              Default: no

              (http://www.g10code.de/docs/pka-intro.de.pdf)  during  signature
              verification (only supported by the GPGME backend).

       crypt_autopgp
              Type: boolean
              Default: yes

              This variable controls whether or  not  mutt  may  automatically
              enable   PGP   encryption/signing   for   messages.    See  also
              “$crypt_autoencrypt”, “$crypt_replyencrypt”,  “$crypt_autosign”,
              “$crypt_replysign” and “$smime_is_default”.

       crypt_autosmime
              Type: boolean
              Default: yes

              This  variable  controls  whether  or not mutt may automatically
              enable  S/MIME  encryption/signing  for   messages.   See   also
              “$crypt_autoencrypt”,  “$crypt_replyencrypt”, “$crypt_autosign”,
              “$crypt_replysign” and “$smime_is_default”.

       date_format
              Type: string
              Default: “!%a, %b %d, %Y at %I:%M:%S%p %Z”

              This variable controls the format of the  date  printed  by  the
              “%d”  sequence  in  “$index_format”.   This  is  passed  to  the
              strftime call  to  process  the  date.  See  the  man  page  for
              strftime(3) for the proper syntax.

              Unless  the  first  character in the string is a bang (“!”), the
              month and week day names are expanded according  to  the  locale
              specified  in  the variable “$locale”. If the first character in
              the string is a bang, the bang is discarded, and the  month  and
              week  day  names in the rest of the string are expanded in the C
              locale (that is in US English).

       default_hook
              Type: string
              Default: “~f %s !~P | (~P ~C %s)”

              This variable controls  how  message-hooks,  reply-hooks,  send-
              hooks,   send2-hooks,   save-hooks,   and   fcc-hooks   will  be
              interpreted if they are specified with  only  a  simple  regexp,
              instead of a matching pattern.  The hooks are expanded when they
              are declared, so a hook will be  interpreted  according  to  the
              value  of  this  variable at the time the hook is declared.  The
              default value matches if the  message  is  either  from  a  user
              matching  the regular expression given, or if it is from you (if
              the from address matches “alternates”) and is to or cc’ed  to  a
              user matching the given regular expression.

       delete
              Type: quadoption
              Default: ask-yes

              Controls whether or not messages are really deleted when closing
              or synchronizing a mailbox.  If set to yes, messages marked  for
              deleting will automatically be purged without prompting.  If set
              to no, messages marked for deletion will be kept in the mailbox.

       delete_untag
              Type: boolean
              Default: yes

              If  this  option  is  set, mutt will untag messages when marking
              them for deletion.  This  applies  when  you  either  explicitly
              delete a message, or when you save it to another folder.

       digest_collapse
              Type: boolean
              Default: yes

              If this option is set, mutt’s received-attachments menu will not
              show the subparts of individual messages in a  multipart/digest.
              To see these subparts, press ’v’ on that menu.

       display_filter
              Type: path
              Default: “”

              When  set,  specifies a command used to filter messages.  When a
              message  is  viewed  it  is  passed   as   standard   input   to
              $display_filter,  and  the  filtered  message  is  read from the
              standard output.

       dotlock_program
              Type: path
              Default: “/usr/bin/mutt_dotlock”

              Contains the path of the mutt_dotlock (8) binary to be  used  by
              mutt.

       dsn_notify
              Type: string
              Default: “”

              This   variable  sets  the  request  for  when  notification  is
              returned.  The string consists of a  comma  separated  list  (no
              spaces!)  of  one  or  more  of  the  following: never, to never
              request  notification,  failure,  to  request  notification   on
              transmission  failure,  delay, to be notified of message delays,
              success, to be notified of successful transmission.

              Example: set dsn_notify=”failure,delay”

              Note: when using $sendmail for delivery, you should  not  enable
              this  unless you are either using Sendmail 8.8.x or greater or a
              MTA providing a sendmail(1)-compatible interface supporting  the
              -N  option  for DSN. For SMTP delivery, it depends on the server
              whether DSN is supported or not.

       dsn_return
              Type: string
              Default: “”

              This variable controls how much of your message is  returned  in
              DSN  messages.   It may be set to either hdrs to return just the
              message header, or full to return the full message.

              Example: set dsn_return=hdrs

              Note: when using $sendmail for delivery, you should  not  enable
              this  unless you are either using Sendmail 8.8.x or greater or a
              MTA providing a sendmail(1)-compatible interface supporting  the
              -R  option  for DSN. For SMTP delivery, it depends on the server
              whether DSN is supported or not.

       duplicate_threads
              Type: boolean
              Default: yes

              This variable controls whether mutt, when  sorting  by  threads,
              threads  messages  with  the same message-id together.  If it is
              set, it will indicate that it thinks they are duplicates of each
              other with an equals sign in the thread diagram.

       edit_headers
              Type: boolean
              Default: no

              This  option  allows  you  to  edit  the header of your outgoing
              messages along with the body of your message.

       editor
              Type: path
              Default: “”

              This variable specifies  which  editor  is  used  by  mutt.   It
              defaults  to  the  value  of  the VISUAL, or EDITOR, environment
              variable, or to the string ”/usr/bin/editor” if neither of those
              are set.

       encode_from
              Type: boolean
              Default: no

              When  set,  mutt will quoted-printable encode messages when they
              contain the string ”From ” in the beginning of a  line.   Useful
              to  avoid  the  tampering  certain  mail  delivery and transport
              agents tend to do with messages.

       envelope_from_address
              Type: e-mail address
              Default: “”

              Manually sets the envelope sender for outgoing  messages.   This
              value is ignored if “$use_envelope_from” is unset.

       escape
              Type: string
              Default: “~”

              Escape character to use for functions in the builtin editor.

       fast_reply
              Type: boolean
              Default: no

              When  set,  the  initial  prompt  for recipients and subject are
              skipped when replying to messages, and the  initial  prompt  for
              subject is skipped when forwarding messages.

              Note:  this variable has no effect when the “$autoedit” variable
              is set.

       fcc_attach
              Type: boolean
              Default: yes

              This variable controls whether or not  attachments  on  outgoing
              messages are saved along with the main body of your message.

       fcc_clear
              Type: boolean
              Default: no

              When  this  variable is set, FCCs will be stored unencrypted and
              unsigned, even when  the  actual  message  is  encrypted  and/or
              signed.  (PGP only)

       folder
              Type: path
              Default: “~/Mail”

              Specifies  the default location of your mailboxes.  A ‘+’ or ‘=’
              at the beginning of a pathname will be expanded to the value  of
              this  variable.   Note that if you change this variable from the
              default value you need to make sure that the  assignment  occurs
              before  you  use  ‘+’  or  ‘=’  for  any  other  variables since
              expansion takes place during the ‘set’ command.

       folder_format
              Type: string
              Default: “%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f”

              This variable allows you to customize the file  browser  display
              to   your   personal   taste.    This   string   is  similar  to
              “$index_format”, but has its own set of printf()-like sequences:

              %C     current file number
              %d     date/time folder was last modified
              %f     filename
              %F     file permissions
              %g     group name (or numeric gid, if missing)
              %l     number of hard links
              %N     N if folder has new mail, blank otherwise
              %s     size in bytes
              %t     * if the file is tagged, blank otherwise
              %u     owner name (or numeric uid, if missing)
              %>X    right  justify  the  rest  of  the  string  and  pad with
                     character ”X”
              %|X    pad to the end of the line with character ”X”
              %*X    soft-fill with character ”X” as pad

              For an  explanation  of  ‘soft-fill’,  see  the  “$index_format”
              documentation.

       followup_to
              Type: boolean
              Default: yes

              Controls  whether  or  not  the Mail-Followup-To header field is
              generated when sending mail.  When set, Mutt will generate  this
              field  when  you are replying to a known mailing list, specified
              with the “subscribe” or “lists” commands.

              This  field  has  two  purposes.   First,  preventing  you  from
              receiving duplicate copies of replies to messages which you send
              to mailing lists, and second, ensuring that you do get  a  reply
              separately for any messages sent to known lists to which you are
              not subscribed.  The header will contain only the list’s address
              for  subscribed  lists,  and  both the list address and your own
              email address for unsubscribed lists.  Without  this  header,  a
              group  reply  to  your message sent to a subscribed list will be
              sent to both the list and your address, resulting in two  copies
              of the same email for you.

       force_name
              Type: boolean
              Default: no

              This  variable is similar to “$save_name”, except that Mutt will
              store a copy of your outgoing message by  the  username  of  the
              address  you are sending to even if that mailbox does not exist.

              Also see the “$record” variable.

       forward_decode
              Type: boolean
              Default: yes

              Controls the decoding of complex MIME messages  into  text/plain
              when  forwarding  a message.  The message header is also RFC2047
              decoded.  This variable is  only  used,  if  “$mime_forward”  is
              unset, otherwise “$mime_forward_decode” is used instead.

       forward_edit
              Type: quadoption
              Default: yes

              This   quadoption   controls   whether   or   not  the  user  is
              automatically placed in the  editor  when  forwarding  messages.
              For those who always want to forward with no modification, use a
              setting of “no”.

       forward_format
              Type: string
              Default: “[%a: %s]”

              This variable controls the default  subject  when  forwarding  a
              message.    It   uses   the   same   format   sequences  as  the
              “$index_format” variable.

       forward_quote
              Type: boolean
              Default: no

              When set forwarded messages included in the  main  body  of  the
              message  (when  “$mime_forward”  is  unset) will be quoted using
              “$indent_string”.

       from
              Type: e-mail address
              Default: “”

              When set, this variable contains a default from address.  It can
              be  overridden  using  my_hdr  (including  from  send-hooks) and
              “$reverse_name”.  This variable is  ignored  if  “$use_from”  is
              unset.

              Defaults to the contents of the environment variable EMAIL.

       gecos_mask
              Type: regular expression
              Default: “^[^,]*”

              A  regular expression used by mutt to parse the GECOS field of a
              password entry when expanding the alias.  By default the regular
              expression is set to ”^[^,]*” which will return the string up to
              the first ”,” encountered.  If the GECOS field contains a string
              like   ”lastname,   firstname”   then   you   should   set   the
              gecos_mask=”.*”.

              This can be useful  if  you  see  the  following  behavior:  you
              address  a  e-mail  to  user  ID stevef whose full name is Steve
              Franklin.  If mutt expands stevef to  ”Franklin”  stevef@foo.bar
              then  you should set the gecos_mask to a regular expression that
              will match the whole name so  mutt  will  expand  ”Franklin”  to
              ”Franklin, Steve”.

       hdrs
              Type: boolean
              Default: yes

              When  unset,  the  header  fields normally added by the “my_hdr”
              command are not created.  This variable  must  be  unset  before
              composing a new message or replying in order to take effect.  If
              set, the user defined header  fields  are  added  to  every  new
              message.

       header
              Type: boolean
              Default: no

              When set, this variable causes Mutt to include the header of the
              message you are replying to into the edit buffer.   The  “$weed”
              setting applies.

       help
              Type: boolean
              Default: yes

              When  set,  help  lines  describing  the  bindings for the major
              functions provided by each menu are displayed on the first  line
              of the screen.

              Note:  The  binding  will  not  be  displayed  correctly  if the
              function is bound to a sequence rather than a single  keystroke.
              Also,  the  help line may not be updated if a binding is changed
              while Mutt is running.  Since this variable is  primarily  aimed
              at new users, neither of these should present a major problem.

       hidden_host
              Type: boolean
              Default: no

              When  set,  mutt  will  skip  the  host name part of “$hostname”
              variable  when  adding  the  domain  part  to  addresses.   This
              variable  does  not affect the generation of Message-IDs, and it
              will not lead to the cut-off of first-level domains.

       hide_limited
              Type: boolean
              Default: no

              When set, mutt will not show the presence of messages  that  are
              hidden by limiting, in the thread tree.

       hide_missing
              Type: boolean
              Default: yes

              When set, mutt will not show the presence of missing messages in
              the thread tree.

       hide_thread_subject
              Type: boolean
              Default: yes

              When set, mutt will not show the  subject  of  messages  in  the
              thread  tree  that  have  the  same  subject  as their parent or
              closest previously displayed sibling.

       hide_top_limited
              Type: boolean
              Default: no

              When set, mutt will not show the presence of messages  that  are
              hidden  by  limiting,  at the top of threads in the thread tree.
              Note that when $hide_limited is set, this option  will  have  no
              effect.

       hide_top_missing
              Type: boolean
              Default: yes

              When set, mutt will not show the presence of missing messages at
              the  top  of  threads  in  the  thread  tree.   Note  that  when
              $hide_missing is set, this option will have no effect.

       history
              Type: number
              Default: 10

              This   variable   controls   the  size  (in  number  of  strings
              remembered) of the string history buffer. The buffer is  cleared
              each time the variable is set.

       history_file
              Type: path
              Default: “~/.mutthistory”

              The file in which Mutt will save its history.

       honor_followup_to
              Type: quadoption
              Default: yes

              This  variable controls whether or not a Mail-Followup-To header
              is honored when group-replying to a message.

       hostname
              Type: string
              Default: “”

              Specifies the fully-qualified hostname of  the  system  mutt  is
              running  on  containing  the  host’s  name and the DNS domain it
              belongs to. It is used as the domain part (after “@”) for  local
              email addresses as well as Message-Id headers.

              Its  value  is  determined  at startup as follows: If the node’s
              name as returned by the uname(3) function contains the  hostname
              and  the domain, these are used to construct $hostname. If there
              is no domain part returned, Mutt will look  for  a  “domain”  or
              “search”  line  in  /etc/resolv.conf  to  determine  the domain.
              Optionally, Mutt can be compiled with a  fixed  domain  name  in
              which case a detected one is not used.

              Also see “$use_domain” and “$hidden_host”.

              Note:  On  Debian  systems,  the  default  for  this variable is
              obtained from /etc/mailname when Mutt starts.

       ignore_linear_white_space
              Type: boolean
              Default: no

              This option replaces linear-white-space between encoded-word and
              *text  to  a single space to prevent the display of MIME-encoded
              “Subject” field from being divided into multiple lines.

       ignore_list_reply_to
              Type: boolean
              Default: no

              Affects the behaviour of the reply  function  when  replying  to
              messages  from  mailing  lists (as defined by the “subscribe” or
              “lists” commands).  When set, if the “Reply-To:” field is set to
              the same value as the “To:” field, Mutt assumes that the “Reply-
              To:” field was set by the mailing list to automate responses  to
              the  list,  and will ignore this field.  To direct a response to
              the mailing list when this option is  set,  use  the  list-reply
              function;  group-reply  will  reply  to  both the sender and the
              list.

       imap_authenticators
              Type: string
              Default: “”

              This is a colon-delimited list of  authentication  methods  mutt
              may  attempt  to  use  to log in to an IMAP server, in the order
              mutt should try them.  Authentication methods are either ’login’
              or  the  right  side of an IMAP ’AUTH=xxx’ capability string, eg
              ’digest-md5’, ’gssapi’ or ’cram-md5’. This  parameter  is  case-
              insensitive.  If this parameter is unset (the default) mutt will
              try all available methods, in order from most-secure  to  least-
              secure.

              Example: set imap_authenticators=”gssapi:cram-md5:login”

              Note:  Mutt  will only fall back to other authentication methods
              if  the  previous  methods  are  unavailable.  If  a  method  is
              available but authentication fails, mutt will not connect to the
              IMAP server.

       imap_check_subscribed
              Type: boolean
              Default: no

              When set, mutt will fetch the set  of  subscribed  folders  from
              your  server on connection, and add them to the set of mailboxes
              it polls for new mail. See also the “mailboxes” command.

       imap_delim_chars
              Type: string
              Default: “/.”

              This contains the list of characters which  you  would  like  to
              treat  as  folder  separators  for  displaying  IMAP  paths.  In
              particular it helps in using the ’=’ shortcut  for  your  folder
              variable.

       imap_headers
              Type: string
              Default: “”

              Mutt  requests  these  header  fields in addition to the default
              headers (”DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-
              TYPE  CONTENT-DESCRIPTION  IN-REPLY-TO  REPLY-TO LINES X-LABEL”)
              from IMAP servers before displaying the index menu. You may want
              to  add  more  headers for spam detection. Note: This is a space
              separated list.

       imap_idle
              Type: boolean
              Default: no

              When set, mutt will attempt to use the IMAP  IDLE  extension  to
              check for new mail in the current mailbox. Some servers (dovecot
              was the inspiration for  this  option)  react  badly  to  mutt’s
              implementation.   If   your   connection   seems  to  freeze  up
              periodically, try unsetting this.

       imap_keepalive
              Type: number
              Default: 900

              This variable specifies the maximum amount of  time  in  seconds
              that  mutt  will  wait  before polling open IMAP connections, to
              prevent the server from closing them before  mutt  has  finished
              with  them. The default is well within the RFC-specified minimum
              amount of time (30 minutes) before a server  is  allowed  to  do
              this,  but  in  practice the RFC does get violated every now and
              then.  Reduce  this  number  if  you   find   yourself   getting
              disconnected from your IMAP server due to inactivity.

       imap_list_subscribed
              Type: boolean
              Default: no

              This  variable configures whether IMAP folder browsing will look
              for only subscribed folders or all folders.  This can be toggled
              in the IMAP browser with the toggle-subscribed function.

       imap_login
              Type: string
              Default: “”

              Your login name on the IMAP server.

              This variable defaults to the value of imap_user.

       imap_pass
              Type: string
              Default: “”

              Specifies  the  password  for your IMAP account.  If unset, Mutt
              will prompt you for your password when you invoke the fetch-mail
              function.  Warning: you should only use this option when you are
              on a fairly secure machine, because the superuser can read  your
              muttrc even if you are the only one who can read the file.

       imap_passive
              Type: boolean
              Default: yes

              When  set,  mutt will not open new IMAP connections to check for
              new mail.  Mutt will only check for new mail over existing  IMAP
              connections.  This is useful if you don’t want to be prompted to
              user/password pairs  on  mutt  invocation,  or  if  opening  the
              connection is slow.

       imap_peek
              Type: boolean
              Default: yes

              When  set,  mutt will avoid implicitly marking your mail as read
              whenever you fetch a message from the server. This is  generally
              a  good  thing,  but  can  make  closing an IMAP folder somewhat
              slower. This option exists to appease speed freaks.

       imap_servernoise
              Type: boolean
              Default: yes

              When set, mutt will  display  warning  messages  from  the  IMAP
              server  as  error  messages.  Since  these  messages  are  often
              harmless, or generated due  to  configuration  problems  on  the
              server  which  are  out  of  the  users’  hands, you may wish to
              suppress them at some point.

       imap_user
              Type: string
              Default: “”

              The name of the user whose mail you intend to access on the IMAP
              server.

              This variable defaults to your user name on the local machine.

       implicit_autoview
              Type: boolean
              Default: no

              If  set  to  “yes”,  mutt will look for a mailcap entry with the
              copiousoutput flag set for every MIME attachment it doesn’t have
              an internal viewer defined for.  If such an entry is found, mutt
              will use the viewer defined in that entry to  convert  the  body
              part to text form.

       include
              Type: quadoption
              Default: ask-yes

              Controls  whether  or  not  a  copy  of  the  message(s) you are
              replying to is included in your reply.

       include_onlyfirst
              Type: boolean
              Default: no

              Controls whether or not Mutt includes only the first  attachment
              of the message you are replying.

       indent_string
              Type: string
              Default: “> ”

              Specifies the string to prepend to each line of text quoted in a
              message to which you are replying.  You are strongly  encouraged
              not  to  change  this  value,  as  it  tends to agitate the more
              fanatical netizens.

              This option is a format string, please see  the  description  of
              “$index_format” for supported printf()-style sequences.

       index_format
              Type: string
              Default: “%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s”

              This  variable allows you to customize the message index display
              to your personal taste.

              “Format strings” are similar to the  strings  used  in  the  “C”
              function  printf  to  format  output  (see the man page for more
              detail).  The following sequences are defined in Mutt:

              %a     address of the author
              %A     reply-to  address  (if  present;  otherwise:  address  of
                     author)
              %b     filename of the original message folder (think mailBox)
              %B     the list to which the letter was sent, or else the folder
                     name (%b).
              %c     number of characters (bytes) in the message
              %C     current message number
              %d     date and time of the message in the format  specified  by
                     “date_format” converted to sender’s time zone
              %D     date  and  time of the message in the format specified by
                     “date_format” converted to the local time zone
              %e     current message number in thread
              %E     number of messages in current thread
              %f     sender (address + real name),  either  From:  or  Return-
                     Path:
              %F     author name, or recipient name if the message is from you
              %H     spam attribute(s) of this message
              %i     message-id of the current message
              %l     number of lines  in  the  message  (does  not  work  with
                     maildir, mh, and possibly IMAP folders)
              %L     If  an  address  in  the To or CC header field matches an
                     address defined by the users  “subscribe”  command,  this
                     displays ”To <list-name>”, otherwise the same as %F.
              %m     total number of message in the mailbox
              %M     number of hidden messages if the thread is collapsed.
              %N     message score
              %n     author’s real name (or address if missing)
              %O     (_O_riginal  save folder)  Where mutt would formerly have
                     stashed the message: list name or recipient  name  if  no
                     list
              %P     progress indicator for the builtin pager (how much of the
                     file has been displayed)
              %s     subject of the message
              %S     status of the message (N/D/d/!/r/*)
              %t     ‘to:’ field (recipients)
              %T     the appropriate character from the $to_chars string
              %u     user (login) name of the author
              %v     first name of the author, or the recipient if the message
                     is from you
              %X     number  of  attachments  (please  see  the  “attachments”
                     section for possible speed effects)
              %y     ‘x-label:’ field, if present
              %Y     ‘x-label’ field, if present, and (1) not  at  part  of  a
                     thread tree, (2) at the top of a thread, or (3) ‘x-label’
                     is different from preceding message’s ‘x-label’.
              %Z     message status flags
              %{fmt} the date and time of the message is converted to sender’s
                     time  zone, and “fmt” is expanded by the library function
                     “strftime”; a leading bang disables locales
              %[fmt] the date and time of the  message  is  converted  to  the
                     local  time  zone,  and  “fmt” is expanded by the library
                     function “strftime”; a leading bang disables locales
              %(fmt) the local date and time when the  message  was  received.
                     “fmt”  is  expanded by the library function “strftime”; a
                     leading bang disables locales
              %<fmt> the current local time. “fmt” is expanded by the  library
                     function “strftime”; a leading bang disables locales.
              %>X    right  justify  the  rest  of  the  string  and  pad with
                     character ”X”
              %|X    pad to the end of the line with character ”X”
              %*X    soft-fill with character ”X” as pad

              ‘Soft-fill’   deserves   some   explanation.    Normal    right-
              justification  will  print  everything  to  the  left of the %>,
              displaying padding and the whatever lies to the  right  only  if
              there’s  room.  By  contrast,  soft-fill  gives  priority to the
              right-hand side, guaranteeing space to display  it  and  showing
              padding only if there’s still room. If necessary, soft-fill will
              eat text leftwards to make room for rightward text.

              Note that these expandos are  supported  in  “save-hook”,  “fcc-
              hook” and “fcc-save-hook”, too.

              See also: “$to_chars”.

       ispell
              Type: path
              Default: “ispell”

              How to invoke ispell (GNU’s spell-checking software).

       keep_flagged
              Type: boolean
              Default: no

              If  set,  read messages marked as flagged will not be moved from
              your spool mailbox to your “$mbox” mailbox, or as a result of  a
              “mbox-hook” command.

       locale
              Type: string
              Default: “C”

              The locale used by strftime(3) to format dates. Legal values are
              the strings your system accepts for the locale variable LC_TIME.

       mail_check
              Type: number
              Default: 5

              This variable configures how often (in seconds) mutt should look
              for new mail.

       mailcap_path
              Type: string
              Default: “”

              This variable specifies which files to consult  when  attempting
              to display MIME bodies not directly supported by Mutt.

       mailcap_sanitize
              Type: boolean
              Default: yes

              If  set,  mutt  will  restrict  possible characters in mailcap %
              expandos to a well-defined set of safe characters.  This is  the
              safe  setting,  but  we  are not sure it doesn’t break some more
              advanced MIME stuff.

              DONT CHANGE THIS SETTING UNLESS YOU ARE REALLY  SURE  WHAT  YOU
              ARE DOING!

       maildir_mtime
              Type: boolean
              Default: no

              If  set,  the  sort-by-date  option  in  the  browser  will sort
              maildirs smartly, not using the mtime of the maildir itself  but
              that  of  the newest message in the new subdirectory, making the
              sorting by reverse date much more useful. People  with  maildirs
              over NFS may wish to leave this option unset.

       header_cache
              Type: path
              Default: “”

              The  header_cache  variable points to the header cache database.
              If header_cache points to a directory it will contain  a  header
              cache  database   per  folder.  If header_cache points to a file
              that file will be a single global header cache. By default it is
              unset so no header caching will be used.

       maildir_header_cache_verify
              Type: boolean
              Default: yes

              Check  for  Maildir  unaware  programs  other  than  mutt having
              modified maildir files when the header cache is  in  use.   This
              incurs  one stat(2) per message every time the folder is opened.

       header_cache_pagesize
              Type: string
              Default: “16384”

              When mutt is compiled with either gdbm or  bdb4  as  the  header
              cache  backend, this option changes the database page size.  Too
              large or too small values can waste space, memory, or CPU  time.
              The default should be more or less optimal for most use cases.

       maildir_trash
              Type: boolean
              Default: no

              If  set,  messages  marked  as  deleted  will  be saved with the
              maildir (T)rashed flag instead of  unlinked.   NOTE:  this  only
              applies  to  maildir-style  mailboxes.   Setting it will have no
              effect on other mailbox types.

       mark_old
              Type: boolean
              Default: yes

              Controls whether or not mutt marks new unread messages as old if
              you  exit a mailbox without reading them.  With this option set,
              the next time you start mutt, the messages will show up with  an
              ”O”  next  to  them  in the index menu, indicating that they are
              old.

       markers
              Type: boolean
              Default: yes

              Controls the display of wrapped lines in the internal pager.  If
              set,  a  “+”  marker  is  displayed  at the beginning of wrapped
              lines. Also see the “$smart_wrap” variable.

       mask
              Type: regular expression
              Default: “!^\.[^.]”

              A regular  expression  used  in  the  file  browser,  optionally
              preceded  by the not operator “!”.  Only files whose names match
              this mask will be shown. The match is always case-sensitive.

       mbox
              Type: path
              Default: “~/mbox”

              This  specifies  the  folder  into  which  read  mail  in   your
              “$spoolfile” folder will be appended.

       mbox_type
              Type: folder magic
              Default: mbox

              The  default mailbox type used when creating new folders. May be
              any of mbox, MMDF, MH and Maildir.

       metoo
              Type: boolean
              Default: no

              If unset, Mutt will remove your address  (see  the  “alternates”
              command) from the list of recipients when replying to a message.

       menu_context
              Type: number
              Default: 0

              This variable controls the number of lines of context  that  are
              given    when    scrolling    through    menus.    (Similar   to
              “$pager_context”.)

       menu_move_off
              Type: boolean
              Default: yes

              When unset, the bottom entry of menus will never scroll up  past
              the  bottom  of  the  screen, unless there are less entries than
              lines.  When set, the bottom entry may move off the bottom.

       menu_scroll
              Type: boolean
              Default: no

              When set, menus will be scrolled up or down one  line  when  you
              attempt  to move across a screen boundary.  If unset, the screen
              is cleared and  the  next  or  previous  page  of  the  menu  is
              displayed (useful for slow links to avoid many redraws).

       meta_key
              Type: boolean
              Default: no

              If  set,  forces  Mutt to interpret keystrokes with the high bit
              (bit 8) set as if the user had pressed the ESC key and  whatever
              key  remains after having the high bit removed.  For example, if
              the key pressed has an ASCII value of 0xf8, then this is treated
              as  if  the  user had pressed ESC then “x”.  This is because the
              result of removing the high bit from “0xf8” is “0x78”, which  is
              the ASCII character “x”.

       mh_purge
              Type: boolean
              Default: no

              When  unset,  mutt  will mimic mh’s behaviour and rename deleted
              messages to ,<old file name> in mh  folders  instead  of  really
              deleting  them.   If the variable is set, the message files will
              simply be deleted.

       mh_seq_flagged
              Type: string
              Default: “flagged”

              The name of the MH sequence used for flagged messages.

       mh_seq_replied
              Type: string
              Default: “replied”

              The name of the MH sequence used to tag replied messages.

       mh_seq_unseen
              Type: string
              Default: “unseen”

              The name of the MH sequence used for unseen messages.

       mime_forward
              Type: quadoption
              Default: no

              When set, the message you are forwarding will be attached  as  a
              separate  MIME  part instead of included in the main body of the
              message.  This is useful for forwarding  MIME  messages  so  the
              receiver  can  properly  view the message as it was delivered to
              you. If you like to switch between MIME and not MIME  from  mail
              to mail, set this variable to ask-no or ask-yes.

              Also see “$forward_decode” and “$mime_forward_decode”.

       mime_forward_decode
              Type: boolean
              Default: no

              Controls  the  decoding of complex MIME messages into text/plain
              when  forwarding  a  message  while  “$mime_forward”   is   set.
              Otherwise “$forward_decode” is used instead.

       mime_forward_rest
              Type: quadoption
              Default: yes

              When  forwarding multiple attachments of a MIME message from the
              recvattach menu,  attachments  which  cannot  be  decoded  in  a
              reasonable manner will be attached to the newly composed message
              if this option is set.

       pgp_mime_signature_filename
              Type: string
              Default: “signature.asc”

              This option sets  the  filename  used  for  signature  parts  in
              PGP/MIME signed messages.

       pgp_mime_signature_description
              Type: string
              Default: “Digital signature”

              This  option  sets  the  Content-Description  used for signature
              parts in PGP/MIME signed messages.

       mix_entry_format
              Type: string
              Default: “%4n %c %-16s %a”

              This variable describes the format of a  remailer  line  on  the
              mixmaster  chain  selection  screen.   The following printf-like
              sequences are supported:

              %n     The running number on the menu.
              %c     Remailer capabilities.
              %s     The remailer’s short name.
              %a     The remailer’s e-mail address.

       mixmaster
              Type: path
              Default: “mixmaster”

              This variable contains the path to the Mixmaster binary on  your
              system.   It  is  used with various sets of parameters to gather
              the list of known remailers,  and  to  finally  send  a  message
              through the mixmaster chain.

              Note:  On  Debian  systems,  this  option  is  set by default to
              “mixmaster-filter” in /etc/Muttrc.

       move
              Type: quadoption
              Default: ask-no

              Controls whether or not Mutt will move read messages  from  your
              spool  mailbox  to  your  “$mbox”  mailbox,  or as a result of a
              “mbox-hook” command.

       message_cachedir
              Type: path
              Default: “”

              Set this to a directory and mutt will cache copies  of  messages
              from  your  IMAP  and  POP  servers here. You are free to remove
              entries at any time, for instance if  stale  entries  accumulate
              because you have deleted messages with another mail client.

       message_cache_clean
              Type: boolean
              Default: no

              If set, mutt will clean out obsolete entries from the cache when
              the mailbox is synchronized. You probably only want  to  set  it
              every once in a while, since it can be a little slow.

       message_format
              Type: string
              Default: “%s”

              This  is  the  string  displayed  in  the  “attachment” menu for
              attachments of type  message/rfc822.   For  a  full  listing  of
              defined    printf()-like    sequences   see   the   section   on
              “$index_format”.

       narrow_tree
              Type: boolean
              Default: no

              This  variable,  when  set,  makes  the  thread  tree  narrower,
              allowing deeper threads to fit on the screen.

       net_inc
              Type: number
              Default: 10

              Operations  that  expect to transfer a large amount of data over
              the network will update their progress every net_inc  kilobytes.
              If set to 0, no progress messages will be displayed.

              See also “$read_inc” and “$write_inc”.

       pager
              Type: path
              Default: “builtin”

              This  variable  specifies  which  pager you would like to use to
              view  messages.   builtin  means  to  use  the  builtin   pager,
              otherwise  this  variable  should  specify  the  pathname of the
              external pager you would like to use.

              Using an external pager may have some disadvantages:  Additional
              keystrokes  are  necessary because you can’t call mutt functions
              directly from the pager, and screen resizes cause  lines  longer
              than the screen width to be badly formatted in the help menu.

       pager_context
              Type: number
              Default: 0

              This  variable  controls the number of lines of context that are
              given when displaying the next or previous page in the  internal
              pager.   By  default,  Mutt will display the line after the last
              one on the screen at the top  of  the  next  page  (0  lines  of
              context).

       pager_format
              Type: string
              Default: “-%Z- %C/%m: %-20.20n   %s%*  -- (%P)”

              This  variable  controls  the  format  of  the  one-line message
              “status” displayed before each message in either the internal or
              an  external  pager.   The  valid  sequences  are  listed in the
              “$index_format” section.

       pager_index_lines
              Type: number
              Default: 0

              Determines the number of lines of a mini-index  which  is  shown
              when  in the pager.  The current message, unless near the top or
              bottom of the folder, will be roughly one third of the way  down
              this mini-index, giving the reader the context of a few messages
              before and after the message.  This is useful, for  example,  to
              determine  how  many  messages  remain to be read in the current
              thread.  One of the lines is reserved for the  status  bar  from
              the index, so a pager_index_lines of 6 will only show 5 lines of
              the actual index.  A value of 0 results in no index being shown.
              If  the  number  of  messages in the current folder is less than
              pager_index_lines, then the index will only use as many lines as
              it needs.

       pager_stop
              Type: boolean
              Default: no

              When  set,  the internal-pager will not move to the next message
              when you are at the end of a message and  invoke  the  next-page
              function.

       crypt_autosign
              Type: boolean
              Default: no

              Setting  this  variable  will  cause  Mutt  to always attempt to
              cryptographically  sign  outgoing   messages.    This   can   be
              overridden  by use of the pgp-menu, when signing is not required
              or encryption is requested as well.  If  “$smime_is_default”  is
              set,  then OpenSSL is used instead to create S/MIME messages and
              settings can be overridden by use of  the  smime-menu.   (Crypto
              only)

       crypt_autoencrypt
              Type: boolean
              Default: no

              Setting  this  variable will cause Mutt to always attempt to PGP
              encrypt outgoing messages.  This  is  probably  only  useful  in
              connection  to  the  send-hook command.  It can be overridden by
              use of the pgp-menu, when encryption is not required or  signing
              is  requested  as  well.   IF  “$smime_is_default”  is set, then
              OpenSSL is used instead to create S/MIME messages  and  settings
              can be overridden by use of the smime-menu.  (Crypto only)

       pgp_ignore_subkeys
              Type: boolean
              Default: yes

              Setting this variable will cause Mutt to ignore OpenPGP subkeys.
              Instead,  the  principal   key   will   inherit   the   subkeys’
              capabilities.   Unset  this  if you want to play interesting key
              selection games.  (PGP only)

       crypt_replyencrypt
              Type: boolean
              Default: yes

              If set, automatically PGP or OpenSSL encrypt replies to messages
              which are encrypted.  (Crypto only)

       crypt_replysign
              Type: boolean
              Default: no

              If  set,  automatically  PGP or OpenSSL sign replies to messages
              which are signed.

              Note: this does not work on  messages  that  are  encrypted  and
              signed!  (Crypto only)

       crypt_replysignencrypted
              Type: boolean
              Default: no

              If  set,  automatically  PGP or OpenSSL sign replies to messages
              which are  encrypted.  This  makes  sense  in  combination  with
              “$crypt_replyencrypt”,   because  it  allows  you  to  sign  all
              messages which are automatically encrypted.  This  works  around
              the  problem  noted in “$crypt_replysign”, that mutt is not able
              to find  out  whether  an  encrypted  message  is  also  signed.
              (Crypto only)

       crypt_timestamp
              Type: boolean
              Default: yes

              If  set, mutt will include a time stamp in the lines surrounding
              PGP or S/MIME output, so spoofing such lines is more  difficult.
              If  you are using colors to mark these lines, and rely on these,
              you may unset this setting.  (Crypto only)

       pgp_use_gpg_agent
              Type: boolean
              Default: no

              If set, mutt will  use  a  possibly-running  gpg-agent  process.
              (PGP only)

       crypt_verify_sig
              Type: quadoption
              Default: yes

              If “yes”, always attempt to verify PGP or S/MIME signatures.  If
              “ask”, ask whether or not to verify  the  signature.   If  “no”,
              never attempt to verify cryptographic signatures.  (Crypto only)

       smime_is_default
              Type: boolean
              Default: no

              The default behaviour of  mutt  is  to  use  PGP  on  all  auto-
              sign/encryption  operations.  To  override  and  to  use OpenSSL
              instead this must be set.  However, this  has  no  effect  while
              replying,   since   mutt  will  automatically  select  the  same
              application that was used to sign/encrypt the original  message.
              (Note   that  this  variable  can  be  overridden  by  unsetting
              $crypt_autosmime.)  (S/MIME only)

       smime_ask_cert_label
              Type: boolean
              Default: yes

              This flag controls whether you want to be asked to enter a label
              for  a  certificate about to be added to the database or not. It
              is set by default.  (S/MIME only)

       smime_decrypt_use_default_key
              Type: boolean
              Default: yes

              If set (default) this tells mutt to  use  the  default  key  for
              decryption. Otherwise, if manage multiple certificate-key-pairs,
              mutt will try to use the mailbox-address to determine the key to
              use.  It  will  ask  you  to supply a key, if it can’t find one.
              (S/MIME only)

       pgp_entry_format
              Type: string
              Default: “%4n %t%f %4l/0x%k %-4a %2c %u”

              This variable allows you to customize the PGP key selection menu
              to   your   personal   taste.   This   string   is   similar  to
              “$index_format”, but has its own set of printf()-like sequences:

              %n     number
              %k     key id
              %u     user id
              %a     algorithm
              %l     key length
              %f     flags
              %c     capabilities
              %t     trust/validity of the key-uid association
              %[<s>] date of the key where <s> is an strftime(3) expression

              (PGP only)

       pgp_good_sign
              Type: regular expression
              Default: “”

              If  you  assign a text to this variable, then a PGP signature is
              only considered verified if the output from  $pgp_verify_command
              contains  the  text. Use this variable if the exit code from the
              command is 0 even for bad signatures.  (PGP only)

       pgp_check_exit
              Type: boolean
              Default: yes

              If set, mutt will check the exit code of the PGP subprocess when
              signing  or  encrypting.   A  non-zero  exit code means that the
              subprocess failed.  (PGP only)

       pgp_long_ids
              Type: boolean
              Default: no

              If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key
              IDs.  (PGP only)

       pgp_retainable_sigs
              Type: boolean
              Default: no

              If  set,  signed  and  encrypted messages will consist of nested
              multipart/signed and multipart/encrypted body parts.

              This is  useful  for  applications  like  encrypted  and  signed
              mailing  lists,  where the outer layer (multipart/encrypted) can
              be easily removed, while  the  inner  multipart/signed  part  is
              retained.  (PGP only)

       pgp_autoinline
              Type: boolean
              Default: no

              This  option  controls  whether  Mutt generates old-style inline
              (traditional) PGP encrypted or  signed  messages  under  certain
              circumstances.   This  can be overridden by use of the pgp-menu,
              when inline is not required.

              Note that Mutt might automatically  use  PGP/MIME  for  messages
              which  consist  of  more  than  a single MIME part.  Mutt can be
              configured to ask before sending PGP/MIME messages  when  inline
              (traditional) would not work.  See also: “$pgp_mime_auto”.

              Also  note  that  using  the  old-style  PGP  message  format is
              strongly deprecated.  (PGP only)

       pgp_replyinline
              Type: boolean
              Default: no

              Setting this variable will  cause  Mutt  to  always  attempt  to
              create  an  inline  (traditional)  message  when  replying  to a
              message which is  PGP  encrypted/signed  inline.   This  can  be
              overridden  by use of the pgp-menu, when inline is not required.
              This option does not automatically detect  if  the  (replied-to)
              message  is  inline;  instead  it  relies  on Mutt internals for
              previously checked/flagged messages.

              Note that Mutt might automatically  use  PGP/MIME  for  messages
              which  consist  of  more  than  a single MIME part.  Mutt can be
              configured to ask before sending PGP/MIME messages  when  inline
              (traditional) would not work.  See also: “$pgp_mime_auto”.

              Also  note  that  using  the  old-style  PGP  message  format is
              strongly deprecated.  (PGP only)

       pgp_show_unusable
              Type: boolean
              Default: yes

              If set, mutt  will  display  non-usable  keys  on  the  PGP  key
              selection  menu.   This  includes  keys which have been revoked,
              have expired, or have been marked as  “disabled”  by  the  user.
              (PGP only)

       pgp_sign_as
              Type: string
              Default: “”

              If  you  have  more than one key pair, this option allows you to
              specify which of your private keys to use.   It  is  recommended
              that  you  use  the  keyid  form  to  specify  your  key  (e.g.,
              “0x00112233”).  (PGP only)

       pgp_strict_enc
              Type: boolean
              Default: yes

              If set, Mutt will automatically encode PGP/MIME signed  messages
              as  quoted-printable.   Please note that unsetting this variable
              may lead to problems with non-verifyable PGP signatures, so only
              change this if you know what you are doing.  (PGP only)

       pgp_timeout
              Type: number
              Default: 300

              The  number  of  seconds  after  which  a cached passphrase will
              expire if not used.  (PGP only)

       pgp_sort_keys
              Type: sort order
              Default: address

              Specifies how the entries in the ‘pgp keys’ menu are sorted. The
              following are legal values:

              address
                     sort alphabetically by user id
              keyid  sort alphabetically by key id
              date   sort by key creation date
              trust  sort by the trust of the key

              If  you prefer reverse order of the above values, prefix it with
              ‘reverse-’.  (PGP only)

       pgp_mime_auto
              Type: quadoption
              Default: ask-yes

              This  option  controls  whether  Mutt  will   prompt   you   for
              automatically   sending   a   (signed/encrypted)  message  using
              PGP/MIME when inline (traditional) fails (for any reason).

              Also note  that  using  the  old-style  PGP  message  format  is
              strongly deprecated.  (PGP only)

       pgp_auto_decode
              Type: boolean
              Default: no

              If  set,  mutt will automatically attempt to decrypt traditional
              PGP messages whenever  the  user  performs  an  operation  which
              ordinarily  would  result  in  the contents of the message being
              operated  on.   For  example,  if  the  user  displays  a   pgp-
              traditional message which has not been manually checked with the
              check-traditional-pgp function, mutt  will  automatically  check
              the message for traditional pgp.

       pgp_decode_command
              Type: string
              Default: “”

              This  format strings specifies a command which is used to decode
              application/pgp attachments.

              The PGP command  formats  have  their  own  set  of  printf-like
              sequences:

              %p     Expands  to  PGPPASSFD=0 when a pass phrase is needed, to
                     an empty string otherwise. Note: This may be used with  a
                     %? construct.
              %f     Expands to the name of a file containing a message.
              %s     Expands  to  the  name of a file containing the signature
                     part
                                of   a   multipart/signed   attachment    when
                     verifying it.
              %a     The value of $pgp_sign_as.
              %r     One or more key IDs.

              For  examples  on how to configure these formats for the various
              versions of PGP which are floating around, see the  pgp*.rc  and
              gpg.rc  files  in  the  samples/  subdirectory  which  has  been
              installed on your  system  alongside  the  documentation.   (PGP
              only)

       pgp_getkeys_command
              Type: string
              Default: “”

              This  command  is  invoked  whenever  mutt  will need public key
              information.  %r is the only printf-like sequence used with this
              format.  (PGP only)

       pgp_verify_command
              Type: string
              Default: “”

              This command is used to verify PGP signatures.  (PGP only)

       pgp_decrypt_command
              Type: string
              Default: “”

              This  command  is used to decrypt a PGP encrypted message.  (PGP
              only)

       pgp_clearsign_command
              Type: string
              Default: “”

              This format is used to  create  a  old-style  ”clearsigned”  PGP
              message.    Note  that  the  use  of  this  format  is  strongly
              deprecated.  (PGP only)

       pgp_sign_command
              Type: string
              Default: “”

              This command is used to create the detached PGP signature for  a
              multipart/signed PGP/MIME body part.  (PGP only)

       pgp_encrypt_sign_command
              Type: string
              Default: “”

              This command is used to both sign and encrypt a body part.  (PGP
              only)

       pgp_encrypt_only_command
              Type: string
              Default: “”

              This command is used to encrypt a body part without signing  it.
              (PGP only)

       pgp_import_command
              Type: string
              Default: “”

              This  command  is  used  to import a key from a message into the
              user’s public key ring.  (PGP only)

       pgp_export_command
              Type: string
              Default: “”

              This command is used to export a public key from the user’s  key
              ring.  (PGP only)

       pgp_verify_key_command
              Type: string
              Default: “”

              This  command  is  used  to  verify key information from the key
              selection menu.  (PGP only)

       pgp_list_secring_command
              Type: string
              Default: “”

              This command is used to list the  secret  key  ring’s  contents.
              The  output  format  must  be  analogous  to the one used by gpg
              --list-keys --with-colons.

              This format is also generated by the pgpring utility which comes
              with mutt.  (PGP only)

       pgp_list_pubring_command
              Type: string
              Default: “”

              This  command  is  used  to list the public key ring’s contents.
              The output format must be analogous  to  the  one  used  by  gpg
              --list-keys --with-colons.

              This format is also generated by the pgpring utility which comes
              with mutt.  (PGP only)

       forward_decrypt
              Type: boolean
              Default: yes

              Controls the handling of encrypted messages  when  forwarding  a
              message.   When  set,  the outer layer of encryption is stripped
              off.  This variable is only used if “$mime_forward” is  set  and
              “$mime_forward_decode” is unset.  (PGP only)

       smime_timeout
              Type: number
              Default: 300

              The  number  of  seconds  after  which  a cached passphrase will
              expire if not used.  (S/MIME only)

       smime_encrypt_with
              Type: string
              Default: “”

              This sets the algorithm that  should  be  used  for  encryption.
              Valid  choices are ”des”, ”des3”, ”rc2-40”, ”rc2-64”, ”rc2-128”.
              If unset ”3des” (TripleDES) is used.  (S/MIME only)

       smime_keys
              Type: path
              Default: “”

              Since there is no pubring/secring  as  with  PGP,  mutt  has  to
              handle  storage  ad  retrieval  of keys/certs by itself. This is
              very basic right now, and stores keys and  certificates  in  two
              different  directories,  both  named as the hash-value retrieved
              from OpenSSL. There is an index  file  which  contains  mailbox-
              address  keyid  pair, and which can be manually edited. This one
              points to the location of the private keys.  (S/MIME only)

       smime_ca_location
              Type: path
              Default: “”

              This variable contains the name of either a directory, or a file
              which  contains  trusted  certificates  for  use  with  OpenSSL.
              (S/MIME only)

              Note: On Debian systems, this defaults  to  the  first  existing
              file   in   the   following  list:  ~/.smime/ca-certificates.crt
              ~/.smime/ca-bundle.crt /etc/ssl/certs/ca-certificates.crt.

       smime_certificates
              Type: path
              Default: “”

              Since there is no pubring/secring  as  with  PGP,  mutt  has  to
              handle  storage  and  retrieval  of keys by itself. This is very
              basic right now, and keys and certificates  are  stored  in  two
              different  directories,  both  named as the hash-value retrieved
              from OpenSSL. There is an index  file  which  contains  mailbox-
              address  keyid pairs, and which can be manually edited. This one
              points to the location of the certificates.  (S/MIME only)

       smime_decrypt_command
              Type: string
              Default: “”

              This format string specifies a command which is used to  decrypt
              application/x-pkcs7-mime attachments.

              The  OpenSSL  command  formats have their own set of printf-like
              sequences similar to PGP’s:

              %f     Expands to the name of a file containing a message.
              %s     Expands to the name of a file  containing  the  signature
                     part
                                of    a   multipart/signed   attachment   when
                     verifying it.
              %k     The key-pair specified with $smime_default_key
              %c     One or more certificate IDs.
              %a     The algorithm used for encryption.
              %C     CA location:  Depending on whether $smime_ca_location
                                points to a directory or file, this expands to
                                ”-CApath   $smime_ca_location”   or   ”-CAfile
                     $smime_ca_location”.

              For examples on how to configure these formats, see the smime.rc
              in  the  samples/  subdirectory which has been installed on your
              system alongside the documentation.  (S/MIME only)

       smime_verify_command
              Type: string
              Default: “”

              This command  is  used  to  verify  S/MIME  signatures  of  type
              multipart/signed.  (S/MIME only)

       smime_verify_opaque_command
              Type: string
              Default: “”

              This  command  is  used  to  verify  S/MIME  signatures  of type
              application/x-pkcs7-mime.  (S/MIME only)

       smime_sign_command
              Type: string
              Default: “”

              This command is  used  to  created  S/MIME  signatures  of  type
              multipart/signed,  which  can  be  read  by  all  mail  clients.
              (S/MIME only)

       smime_sign_opaque_command
              Type: string
              Default: “”

              This command is  used  to  created  S/MIME  signatures  of  type
              application/x-pkcs7-signature, which can only be handled by mail
              clients supporting the S/MIME extension.  (S/MIME only)

       smime_encrypt_command
              Type: string
              Default: “”

              This command  is  used  to  create  encrypted  S/MIME  messages.
              (S/MIME only)

       smime_pk7out_command
              Type: string
              Default: “”

              This  command  is  used  to  extract  PKCS7 structures of S/MIME
              signatures, in order to extract the public X509  certificate(s).
              (S/MIME only)

       smime_get_cert_command
              Type: string
              Default: “”

              This  command  is used to extract X509 certificates from a PKCS7
              structure.  (S/MIME only)

       smime_get_signer_cert_command
              Type: string
              Default: “”

              This  command  is  used  to  extract  only  the   signers   X509
              certificate  from  a S/MIME signature, so that the certificate’s
              owner may get compared to  the  email’s  ’From’-field.   (S/MIME
              only)

       smime_import_cert_command
              Type: string
              Default: “”

              This  command  is  used  to import a certificate via smime_keys.
              (S/MIME only)

       smime_get_cert_email_command
              Type: string
              Default: “”

              This command is used to extract the mail  address(es)  used  for
              storing  X509  certificates,  and  for verification purposes (to
              check whether  the  certificate  was  issued  for  the  sender’s
              mailbox).  (S/MIME only)

       smime_default_key
              Type: string
              Default: “”

              This  is  the  default key-pair to use for signing. This must be
              set to the keyid (the hash-value that OpenSSL generates) to work
              properly (S/MIME only)

       ssl_force_tls
              Type: boolean
              Default: no

              If  this variable is set, Mutt will require that all connections
              to remote servers be encrypted. Furthermore it will  attempt  to
              negotiate  TLS  even  if  the  server  does  not  advertise  the
              capability,  since  it  would  otherwise  have  to   abort   the
              connection anyway. This option supersedes “$ssl_starttls”.

       ssl_starttls
              Type: quadoption
              Default: yes

              If  set  (the  default),  mutt  will  attempt to use STARTTLS on
              servers advertising the capability. When unset,  mutt  will  not
              attempt to use STARTTLS regardless of the server’s capabilities.

       certificate_file
              Type: path
              Default: “~/.mutt_certificates”

              This variable specifies the  file  where  the  certificates  you
              trust are saved. When an unknown certificate is encountered, you
              are asked if you accept  it  or  not.  If  you  accept  it,  the
              certificate   can  also  be  saved  in  this  file  and  further
              connections are automatically accepted.

              You can also manually add CA  certificates  in  this  file.  Any
              server   certificate  that  is  signed  with  one  of  these  CA
              certificates are also automatically accepted.

              Example: set certificate_file=~/.mutt/certificates

       ssl_use_sslv3
              Type: boolean
              Default: yes

              This variables specifies whether to attempt to use SSLv3 in  the
              SSL authentication process.

       ssl_use_tlsv1
              Type: boolean
              Default: yes

              This  variables specifies whether to attempt to use TLSv1 in the
              SSL authentication process.

       ssl_min_dh_prime_bits
              Type: number
              Default: 0

              This variable specifies the minimum acceptable  prime  size  (in
              bits)  for  use in any Diffie-Hellman key exchange. A value of 0
              will use the default from the GNUTLS library.

       ssl_ca_certificates_file
              Type: path
              Default: “”

              This  variable  specifies   a   file   containing   trusted   CA
              certificates.  Any server certificate that is signed with one of
              these CA certificates are also automatically accepted.

              Example:     set     ssl_ca_certificates_file=/etc/ssl/certs/ca-
              certificates.crt

              Note:  On  Debian systems, this variable defaults to the example
              mentioned.  This  file  is  managed  by  the   “ca-certificates”
              package.

       pipe_split
              Type: boolean
              Default: no

              Used  in  connection with the pipe-message command and the “tag-
              prefix” operator.  If this variable is unset, when piping a list
              of  tagged  messages Mutt will concatenate the messages and will
              pipe them as a single folder.  When  set,  Mutt  will  pipe  the
              messages  one  by  one.  In both cases the messages are piped in
              the current sorted order, and the “$pipe_sep” separator is added
              after each message.

       pipe_decode
              Type: boolean
              Default: no

              Used  in  connection with the pipe-message command.  When unset,
              Mutt will pipe the messages without any preprocessing. When set,
              Mutt  will  weed headers and will attempt to PGP/MIME decode the
              messages first.

       pipe_sep
              Type: string
              Default: “\n”

              The separator to add between messages  when  piping  a  list  of
              tagged messages to an external Unix command.

       pop_authenticators
              Type: string
              Default: “”

              This  is  a  colon-delimited list of authentication methods mutt
              may attempt to use to log in to an POP server, in the order mutt
              should  try  them.   Authentication  methods  are either ’user’,
              ’apop’ or any  SASL  mechanism,  eg  ’digest-md5’,  ’gssapi’  or
              ’cram-md5’.    This   parameter  is  case-insensitive.  If  this
              parameter is unset (the default) mutt  will  try  all  available
              methods, in order from most-secure to least-secure.

              Example: set pop_authenticators=”digest-md5:apop:user”

       pop_auth_try_all
              Type: boolean
              Default: yes

              If  set,  Mutt  will try all available methods. When unset, Mutt
              will only fall back  to  other  authentication  methods  if  the
              previous  methods  are unavailable. If a method is available but
              authentication fails, Mutt will not connect to the POP server.

       pop_checkinterval
              Type: number
              Default: 60

              This variable configures how often (in seconds) mutt should look
              for  new  mail  in the currently selected mailbox if it is a POP
              mailbox.

       pop_delete
              Type: quadoption
              Default: ask-no

              If set, Mutt will delete successfully downloaded  messages  from
              the  POP server when using the fetch-mail function.  When unset,
              Mutt will download messages but  also  leave  them  on  the  POP
              server.

       pop_host
              Type: string
              Default: “”

              The  name  of  your POP server for the fetch-mail function.  You
              can also specify an alternative port, username and password, ie:

              [pop[s]://][username[:password]@]popserver[:port]

       pop_last
              Type: boolean
              Default: no

              If  this  variable  is  set, mutt will try to use the ”LAST” POP
              command for retrieving only unread messages from the POP  server
              when using the fetch-mail function.

       pop_reconnect
              Type: quadoption
              Default: ask-yes

              Controls whether or not Mutt will try to reconnect to POP server
              if the connection is lost.

       pop_user
              Type: string
              Default: “”

              Your login name on the POP server.

              This variable defaults to your user name on the local machine.

       pop_pass
              Type: string
              Default: “”

              Specifies the password for your POP  account.   If  unset,  Mutt
              will  prompt  you  for  your password when you open POP mailbox.
              Warning: you should only use this  option  when  you  are  on  a
              fairly  secure  machine,  because  the  superuser  can read your
              muttrc even if you are the only one who can read the file.

       post_indent_string
              Type: string
              Default: “”

              Similar to the “$attribution” variable, Mutt  will  append  this
              string  after  the inclusion of a message which is being replied
              to.

       postpone
              Type: quadoption
              Default: ask-yes

              Controls whether or not messages are saved in  the  “$postponed”
              mailbox  when  you  elect  not to send immediately. Also see the
              “$recall” variable.

       postponed
              Type: path
              Default: “~/postponed”

              Mutt allows you to indefinitely  “postpone  sending  a  message”
              which  you  are editing.  When you choose to postpone a message,
              Mutt saves it in the mailbox specified by this  variable.   Also
              see the “$postpone” variable.

       preconnect
              Type: string
              Default: “”

              If  set,  a  shell  command  to  be  executed  if  mutt fails to
              establish a connection to the server. This is useful for setting
              up  secure connections, e.g. with ssh(1). If the command returns
              a  nonzero status, mutt gives up opening the server. Example:

              preconnect=”ssh  -f  -q  -L  1234:mailhost.net:143  mailhost.net
              sleep 20 < /dev/null > /dev/null”

              Mailbox   ’foo’   on   mailhost.net   can   now  be  reached  as
              ’{localhost:1234}foo’.

              NOTE: For this example to work, you must be able to  log  in  to
              the remote machine without having to enter a password.

       print
              Type: quadoption
              Default: ask-no

              Controls  whether  or  not Mutt really prints messages.  This is
              set to ask-no by default, because some people  accidentally  hit
              “p” often (like me).

       print_command
              Type: path
              Default: “lpr”

              This  specifies  the  command  pipe that should be used to print
              messages.

       print_decode
              Type: boolean
              Default: yes

              Used in connection with  the  print-message  command.   If  this
              option is set, the message is decoded before it is passed to the
              external command specified by $print_command.  If this option is
              unset,  no  processing  will  be  applied  to  the  message when
              printing it.  The latter setting may be useful if you are  using
              some advanced printer filter which is able to properly format e-
              mail messages for printing.

       print_split
              Type: boolean
              Default: no

              Used in connection with  the  print-message  command.   If  this
              option  is  set,  the  command  specified  by  $print_command is
              executed once for each message which is to be printed.  If  this
              option  is  unset,  the  command  specified by $print_command is
              executed only once, and all the messages are concatenated,  with
              a form feed as the message separator.

              Those  who use the enscript(1) program’s mail-printing mode will
              most likely want to set this option.

       prompt_after
              Type: boolean
              Default: yes

              If you use an external  “$pager”,  setting  this  variable  will
              cause  Mutt  to  prompt  you  for a command when the pager exits
              rather than returning to the index menu.  If  unset,  Mutt  will
              return to the index menu when the external pager exits.

       query_command
              Type: path
              Default: “”

              This  specifies  the command that mutt will use to make external
              address queries.  The string should contain a %s, which will  be
              substituted  with  the query string the user types.  See “query”
              for more information.

       quit
              Type: quadoption
              Default: yes

              This variable controls whether “quit” and “exit”  actually  quit
              from  mutt.  If it set to yes, they do quit, if it is set to no,
              they have no effect, and if it is set to ask-yes or ask-no,  you
              are prompted for confirmation when you try to quit.

       quote_regexp
              Type: regular expression
              Default: “^([ \t]*[|>:}#])+”

              A  regular  expression  used  in the internal-pager to determine
              quoted sections of text in the body of a message.

              Note: In order to use  the  quotedx  patterns  in  the  internal
              pager, you need to set this to a regular expression that matches
              exactly the quote characters at the beginning of quoted lines.

       read_inc
              Type: number
              Default: 10

              If set to a value  greater  than  0,  Mutt  will  display  which
              message  it  is  currently  on  when  reading  a mailbox or when
              performing search actions such as search and limit. The  message
              is  printed  after  read_inc messages have been read or searched
              (e.g., if set to 25, Mutt will print a message  when  it  is  at
              message  25,  and  then again when it gets to message 50).  This
              variable is meant to indicate progress when reading or searching
              large mailboxes which may take some time.  When set to 0, only a
              single message will appear before the reading the mailbox.

              Also see the “$write_inc” variable and the “Tuning”  section  of
              the manual for performance considerations.

       read_only
              Type: boolean
              Default: no

              If set, all folders are opened in read-only mode.

       realname
              Type: string
              Default: “”

              This variable specifies what ”real” or ”personal” name should be
              used when sending messages.

              By default, this is the GECOS field from /etc/passwd.  Note that
              this variable will not be used when the user has set a real name
              in the $from variable.

       recall
              Type: quadoption
              Default: ask-yes

              Controls whether or not Mutt  recalls  postponed  messages  when
              composing a new message.  Also see “$postponed”.

              Setting this variable to “yes” is not generally useful, and thus
              not recommended.

       record
              Type: path
              Default: “~/sent”

              This specifies the file into which your outgoing messages should
              be  appended.  (This is meant as the primary method for saving a
              copy of your messages, but another way to do this is  using  the
              “my_hdr”  command to create a Bcc: field with your email address
              in it.)

              The value of $record is  overridden  by  the  “$force_name”  and
              “$save_name” variables, and the “fcc-hook” command.

       reply_regexp
              Type: regular expression
              Default: “^(re([\[0-9\]+])*|aw):[ \t]*”

              A  regular  expression  used  to  recognize  reply messages when
              threading and replying. The default  value  corresponds  to  the
              English ”Re:” and the German ”Aw:”.

       reply_self
              Type: boolean
              Default: no

              If  unset  and  you  are replying to a message sent by you, Mutt
              will assume that you want to reply to  the  recipients  of  that
              message rather than to yourself.

       reply_to
              Type: quadoption
              Default: ask-yes

              If  set,  when  replying to a message, Mutt will use the address
              listed in the Reply-to: header as the recipient  of  the  reply.
              If  unset,  it  will  use  the address in the From: header field
              instead.  This option is useful for reading a mailing list  that
              sets the Reply-To: header field to the list address and you want
              to send a private message to the author of a message.

       resolve
              Type: boolean
              Default: yes

              When set, the cursor will be automatically advanced to the  next
              (possibly  undeleted)  message  whenever a command that modifies
              the current message is executed.

       reverse_alias
              Type: boolean
              Default: no

              This variable controls whether or  not  Mutt  will  display  the
              ”personal”  name from your aliases in the index menu if it finds
              an alias that matches the message’s sender.  For example, if you
              have the following alias:

              alias juser abd30425@somewhere.net (Joe User)

              and then you receive mail which contains the following header:

              From: abd30425@somewhere.net

              It would be displayed in the index menu as “Joe User” instead of
              “abd30425@somewhere.net.”  This is useful when the  person’s  e-
              mail  address is not human friendly (like CompuServe addresses).

       reverse_name
              Type: boolean
              Default: no

              It may sometimes arrive that  you  receive  mail  to  a  certain
              machine, move the messages to another machine, and reply to some
              the messages from there.  If this variable is set,  the  default
              From:  line  of  the  reply  messages is built using the address
              where you received the messages you  are  replying  to  if  that
              address  matches  your alternates.  If the variable is unset, or
              the address that would be used doesn’t  match  your  alternates,
              the From: line will use your address on the current machine.

       reverse_realname
              Type: boolean
              Default: yes

              This  variable  fine-tunes  the  behaviour  of  the reverse_name
              feature.  When it  is  set,  mutt  will  use  the  address  from
              incoming messages as-is, possibly including eventual real names.
              When it is unset, mutt will override any such  real  names  with
              the setting of the realname variable.

       rfc2047_parameters
              Type: boolean
              Default: no

              When  this  variable  is  set, Mutt will decode RFC-2047-encoded
              MIME parameters.  You  want  to  set  this  variable  when  mutt
              suggests  you  to  save  attachments  to  files named like this:
              =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=

              When this variable is set interactively, the change doesn’t have
              the desired effect before you have changed folders.

              Note  that  this  use  of  RFC  2047’s  encoding  is explicitly,
              prohibited by the standard, but nevertheless encountered in  the
              wild.   Also  note that setting this parameter will not have the
              effect that mutt generates this kind of encoding.  Instead, mutt
              will unconditionally use the encoding specified in RFC 2231.

       save_address
              Type: boolean
              Default: no

              If set, mutt will take the sender’s full address when choosing a
              default  folder  for  saving  a   mail.   If   “$save_name”   or
              “$force_name”  is  set too, the selection of the fcc folder will
              be changed as well.

       save_empty
              Type: boolean
              Default: yes

              When unset, mailboxes which contain no saved  messages  will  be
              removed  when  closed  (the  exception  is “$spoolfile” which is
              never removed).  If set, mailboxes are never removed.

              Note: This only applies to mbox and MMDF folders, Mutt does  not
              delete MH and Maildir directories.

       save_history
              Type: number
              Default: 0

              This  variable  controls  the  size  of the history saved in the
              “$history_file” file.

       save_name
              Type: boolean
              Default: no

              This variable controls  how  copies  of  outgoing  messages  are
              saved.   When set, a check is made to see if a mailbox specified
              by the recipient address exists (this is done by searching for a
              mailbox in the “$folder” directory with the username part of the
              recipient address).  If the mailbox exists, the outgoing message
              will be saved to that mailbox, otherwise the message is saved to
              the “$record” mailbox.

              Also see the “$force_name” variable.

       score
              Type: boolean
              Default: yes

              When this variable is unset, scoring is turned off.  This can be
              useful  to  selectively disable scoring for certain folders when
              the “$score_threshold_delete” variable and friends are used.

       score_threshold_delete
              Type: number
              Default: -1

              Messages which have been assigned a score equal to or lower than
              the value of this variable are automatically marked for deletion
              by mutt.  Since mutt scores are always greater than or equal  to
              zero,  the  default  setting  of this variable will never mark a
              message for deletion.

       score_threshold_flag
              Type: number
              Default: 9999

              Messages which have been assigned a score greater than or  equal
              to this variable’s value are automatically marked ”flagged”.

       score_threshold_read
              Type: number
              Default: -1

              Messages which have been assigned a score equal to or lower than
              the value of this variable are automatically marked as  read  by
              mutt.   Since  mutt  scores  are always greater than or equal to
              zero, the default setting of this variable  will  never  mark  a
              message read.

       send_charset
              Type: string
              Default: “us-ascii:iso-8859-1:utf-8”

              A  colon-delimited list of character sets for outgoing messages.
              Mutt will use the first character set into which the text can be
              converted  exactly.   If  your  “$charset” is not iso-8859-1 and
              recipients may not understand UTF-8, it is advisable to  include
              in  the  list  an appropriate widely used standard character set
              (such as iso-8859-2, koi8-r or iso-2022-jp) either instead of or
              after ”iso-8859-1”.

              In  case the text cannot be converted into one of these exactly,
              mutt uses “$charset” as a fallback.

       sendmail
              Type: path
              Default: “/usr/sbin/sendmail -oem -oi”

              Specifies the program and arguments used to deliver mail sent by
              Mutt.   Mutt  expects  that  the  specified  program  interprets
              additional arguments as recipient addresses.

       sendmail_wait
              Type: number
              Default: 0

              Specifies the number of seconds  to  wait  for  the  “$sendmail”
              process  to  finish before giving up and putting delivery in the
              background.

              Mutt interprets the value of this variable as follows:
              >0     number of seconds to wait for sendmail to  finish  before
                     continuing
              0      wait forever for sendmail to finish
              <0     always put sendmail in the background without waiting

              Note that if you specify a value other than 0, the output of the
              child process will be put in a temporary file.  If there is some
              error, you will be informed as to where to find the output.

       shell
              Type: path
              Default: “”

              Command to use when spawning a subshell.  By default, the user’s
              login shell from /etc/passwd is used.

       sig_dashes
              Type: boolean
              Default: yes

              If set, a line containing “-- ” will  be  inserted  before  your
              “$signature”.   It  is  strongly  recommended that you not unset
              this variable unless your “signature” contains just  your  name.
              The  reason  for  this is because many software packages use “--
              \n” to detect your signature.  For example, Mutt has the ability
              to  highlight  the signature in a different color in the builtin
              pager.

       sig_on_top
              Type: boolean
              Default: no

              If set, the signature will be  included  before  any  quoted  or
              forwarded  text.  It is strongly recommended that you do not set
              this variable unless you really know what you are doing, and are
              prepared to take some heat from netiquette guardians.

       signature
              Type: path
              Default: “~/.signature”

              Specifies  the  filename of your signature, which is appended to
              all outgoing messages.   If the filename ends with a pipe (“|”),
              it  is assumed that filename is a shell command and input should
              be read from its stdout.

       simple_search
              Type: string
              Default: “~f %s | ~s %s”

              Specifies how Mutt should expand a simple  search  into  a  real
              search  pattern.   A  simple search is one that does not contain
              any of the ~ operators.  See “patterns” for more information  on
              search patterns.

              For example, if you simply type joe at a search or limit prompt,
              Mutt will automatically expand it to the value specified by this
              variable.  For the default value it would be:

              ~f joe | ~s joe

       smart_wrap
              Type: boolean
              Default: yes

              Controls  the  display  of lines longer than the screen width in
              the internal pager. If set, long lines are  wrapped  at  a  word
              boundary.   If  unset,  lines  are  simply wrapped at the screen
              edge. Also see the “$markers” variable.

       smileys
              Type: regular expression
              Default: “(>From )|(:[-^]?[][)(><}{|/DP])”

              The  pager  uses  this  variable  to  catch  some  common  false
              positives  of  “$quote_regexp”,  most  notably  smileys  in  the
              beginning of a line

       sleep_time
              Type: number
              Default: 1

              Specifies time, in seconds, to pause  while  displaying  certain
              informational  messages,  while moving from folder to folder and
              after expunging messages from the current folder.   The  default
              is  to  pause  one  second,  so  a value of zero for this option
              suppresses the pause.

       smtp_authenticators
              Type: string
              Default: “”

              This is a colon-delimited list of  authentication  methods  mutt
              may  attempt  to  use  to log in to an SMTP server, in the order
              mutt should try  them.   Authentication  methods  are  any  SASL
              mechanism,   eg  “digest-md5”,  “gssapi”  or  “cram-md5”.   This
              parameter is case-insensitive. If this parameter is  unset  (the
              default)  mutt  will  try  all  available methods, in order from
              most-secure to least-secure.

              Example: set smtp_authenticators=”digest-md5:cram-md5”

       smtp_pass
              Type: string
              Default: “”

              Specifies the password for your SMTP account.   If  unset,  Mutt
              will  prompt  you for your password when you first send mail via
              SMTP.  See “smtp_url” to configure mutt to send mail  via  SMTP.
              Warning:  you  should  only  use  this  option when you are on a
              fairly secure machine,  because  the  superuser  can  read  your
              muttrc even if you are the only one who can read the file.

       smtp_url
              Type: string
              Default: “”

              Defines the SMTP “smart” host where sent messages should relayed
              for delivery. This should take the form of an SMTP URL, eg:

              smtp[s]://[user[:pass]@]host[:port]/

              Setting this variable overrides the  value  of  the  “$sendmail”
              variable.

       sort
              Type: sort order
              Default: date

              Specifies  how to sort messages in the index menu.  Valid values
              are:

                 date or date-sent
                 date-received
                 from
                 mailbox-order (unsorted)
                 score
                 size
                 spam
                 subject
                 threads
                 to

              You may optionally use the reverse- prefix  to  specify  reverse
              sorting order (example: set sort=reverse-date-sent).

              Note:  On  Debian  systems,  this  option  is  set by default to
              “threads” in /etc/Muttrc.

       sort_alias
              Type: sort order
              Default: alias

              Specifies how the entries in the ‘alias’ menu are  sorted.   The
              following are legal values:

                 address (sort alphabetically by email address)
                 alias (sort alphabetically by alias name)
                 unsorted (leave in order specified in .muttrc)

       sort_aux
              Type: sort order
              Default: date

              When  sorting by threads, this variable controls how threads are
              sorted in relation to other threads, and how the branches of the
              thread  trees  are  sorted.   This  can be set to any value that
              “$sort” can, except threads (in that case, mutt  will  just  use
              date-sent).   You  can also specify the last- prefix in addition
              to the reverse- prefix, but last- must come after reverse-.  The
              last-  prefix  causes messages to be sorted against its siblings
              by which has the last descendant, using the rest of sort_aux  as
              an  ordering.   For  instance,  set sort_aux=last- date-received
              would mean that if a new message is received in a  thread,  that
              thread becomes the last one displayed (or the first, if you have
              set sort=reverse-threads.)  Note:  For  reversed  “$sort”  order
              $sort_aux is reversed again (which is not the right thing to do,
              but kept to not break any existing configuration setting).

       sort_browser
              Type: sort order
              Default: alpha

              Specifies how to sort entries in the file browser.  By  default,
              the entries are sorted alphabetically.  Valid values:

                 alpha (alphabetically)
                 date
                 size
                 unsorted

              You  may  optionally  use the reverse- prefix to specify reverse
              sorting order (example: set sort_browser=reverse-date).

       sort_re
              Type: boolean
              Default: yes

              This variable is  only  useful  when  sorting  by  threads  with
              “$strict_threads” unset.  In that case, it changes the heuristic
              mutt uses to thread messages by subject.  With sort_re set, mutt
              will  only  attach  a message as the child of another message by
              subject if the subject  of  the  child  message  starts  with  a
              substring matching the setting of “$reply_regexp”.  With sort_re
              unset, mutt will attach the message whether or not this  is  the
              case,  as long as the non-“$reply_regexp” parts of both messages
              are identical.

       spam_separator
              Type: string
              Default: “,”

              “spam_separator”  controls  what  happens  when  multiple   spam
              headers  are  matched:  if  unset,  each  successive header will
              overwrite any previous matches value for the spam label. If set,
              each  successive  match  will  append  to  the  previous,  using
              “spam_separator” as a separator.

       spoolfile
              Type: path
              Default: “”

              If your spool mailbox is  in  a  non-default  place  where  Mutt
              cannot find it, you can specify its location with this variable.
              Mutt will automatically set this variable to the  value  of  the
              environment variable $MAIL if it is not set.

       status_chars
              Type: string
              Default: “-*%A”

              Controls   the   characters   used  by  the  ”%r”  indicator  in
              “$status_format”. The first character is used when  the  mailbox
              is  unchanged.  The  second  is  used  when the mailbox has been
              changed, and it needs to be resynchronized. The third is used if
              the  mailbox is in read-only mode, or if the mailbox will not be
              written when exiting that mailbox (You  can  toggle  whether  to
              write  changes  to  a  mailbox  with the toggle-write operation,
              bound by default to ”%”). The fourth is used  to  indicate  that
              the  current  folder  has  been  opened  in attach- message mode
              (Certain  operations  like  composing  a  new  mail,   replying,
              forwarding, etc. are not permitted in this mode).

       status_format
              Type: string
              Default: “-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---”

              Controls  the  format  of the status line displayed in the index
              menu.  This string is similar to “$index_format”,  but  has  its
              own set of printf()-like sequences:

              %b     number of mailboxes with new mail *
              %d     number of deleted messages *
              %f     the full pathname of the current mailbox
              %F     number of flagged messages *
              %h     local hostname
              %l     size (in bytes) of the current mailbox *
              %L     size  (in bytes) of the messages shown (i.e., which match
                     the current limit) *
              %m     the number of messages in the mailbox *
              %M     the number of  messages  shown  (i.e.,  which  match  the
                     current limit) *
              %n     number of new messages in the mailbox *
              %o     number of old unread messages *
              %p     number of postponed messages *
              %P     percentage of the way through the index
              %r     modified/read-only/won’t-write/attach-message  indicator,
                     according to $status_chars
              %s     current sorting mode ($sort)
              %S     current aux sorting method ($sort_aux)
              %t     number of tagged messages *
              %u     number of unread messages *
              %v     Mutt version string
              %V     currently active limit pattern, if any *
              %>X    right justify the rest of the string and pad with ”X”
              %|X    pad to the end of the line with ”X”
              %*X    soft-fill with character ”X” as pad

              For an  explanation  of  ‘soft-fill’,  see  the  “$index_format”
              documentation.

              * = can be optionally printed if nonzero

              Some  of  the  above sequences can be used to optionally print a
              string if their value is nonzero.  For  example,  you  may  only
              want  to  see  the  number  of flagged messages if such messages
              exist, since zero is not particularly meaningful.  To optionally
              print  a  string  based  upon  one  of  the above sequences, the
              following construct is used:

              %?<sequence_char>?<optional_string>?

              where sequence_char is a character from  the  table  above,  and
              optional_string   is  the  string  you  would  like  printed  if
              sequence_char is nonzero.   optional_string  may  contain  other
              sequences  as well as normal text, but you may not nest optional
              strings.

              Here is an example illustrating  how  to  optionally  print  the
              number of new messages in a mailbox: %?n?%n new messages.?

              You  can  also  switch  between  two strings using the following
              construct:

              %?<sequence_char>?<if_string>&<else_string>?

              If the value of sequence_char is  non-zero,  if_string  will  be
              expanded, otherwise else_string will be expanded.

              You  can  force  the  result  of  any printf-like sequence to be
              lowercase by prefixing the sequence character with an underscore
              (_)  sign.   For  example,  if  you  want  to  display the local
              hostname in lowercase, you would use: %_h

              If you prefix the sequence character with a colon (:) character,
              mutt will replace any dots in the expansion by underscores. This
              might be helpful with IMAP  folders  that  don’t  like  dots  in
              folder names.

       status_on_top
              Type: boolean
              Default: no

              Setting this variable causes the “status bar” to be displayed on
              the first line of the screen rather than near the bottom.

       strict_threads
              Type: boolean
              Default: no

              If set, threading will only make use of  the  “In-Reply-To”  and
              “References”  fields  when  you  “$sort” by message threads.  By
              default, messages with the same subject are grouped together  in
              “pseudo  threads.”. This may not always be desirable, such as in
              a personal  mailbox  where  you  might  have  several  unrelated
              messages  with the subject “hi” which will get grouped together.
              See also “$sort_re” for a less drastic way of  controlling  this
              behaviour.

       suspend
              Type: boolean
              Default: yes

              When unset, mutt won’t stop when the user presses the terminal’s
              susp key, usually “control-Z”. This is useful if  you  run  mutt
              inside an xterm using a command like xterm -e mutt.

       text_flowed
              Type: boolean
              Default: no

              When   set,   mutt   will   generate  text/plain;  format=flowed
              attachments.  This format is easier to handle for  some  mailing
              software,  and  generally  just  looks  like  ordinary text.  To
              actually make use of this format’s features, you’ll need support
              in your editor.

              Note that $indent_string is ignored when this option is set.

       thread_received
              Type: boolean
              Default: no

              When  set, mutt uses the date received rather than the date sent
              to thread messages by subject.

       thorough_search
              Type: boolean
              Default: no

              Affects the ~b and ~h search  operations  described  in  section
              “patterns”  above.   If  set,  the  headers  and  attachments of
              messages to be searched are decoded before searching.  If unset,
              messages are searched as they appear in the folder.

       tilde
              Type: boolean
              Default: no

              When  set, the internal-pager will pad blank lines to the bottom
              of the screen with a tilde (~).

       time_inc
              Type: number
              Default: 0

              Along with “read_inc”, “write_inc”, and “net_inc”, this variable
              controls   the   frequency   with  which  progress  updates  are
              displayed.  It   suppresses   updates   less   than   “time_inc”
              milliseconds  apart. This can improve throughput on systems with
              slow terminals, or when running mutt on a remote system.

       timeout
              Type: number
              Default: 600

              When Mutt is waiting for user input either idleing in  menus  or
              in  an  interactive  prompt,  Mutt  would  block  until input is
              present. Depending on the context, this  would  prevent  certain
              operations  from  working, like checking for new mail or keeping
              an IMAP connection alive.

              This variable controls how many seconds Mutt will at  most  wait
              until it aborts waiting for input, performs these operations and
              continues to wait for input.

              A value of zero or less will cause Mutt to never time out.

       tmpdir
              Type: path
              Default: “”

              This variable allows you to specify where Mutt  will  place  its
              temporary  files  needed  for displaying and composing messages.
              If this variable is not set, the environment variable TMPDIR  is
              used.  If TMPDIR is not set then ”/tmp” is used.

       to_chars
              Type: string
              Default: “ +TCFL”

              Controls  the  character used to indicate mail addressed to you.
              The first character is  the  one  used  when  the  mail  is  NOT
              addressed  to your address (default: space).  The second is used
              when you are the only recipient of  the  message  (default:  +).
              The  third  is when your address appears in the TO header field,
              but you are not the only recipient of the message (default:  T).
              The  fourth  character is used when your address is specified in
              the CC header field, but you are not the  only  recipient.   The
              fifth  character  is used to indicate mail that was sent by you.
              The sixth character is used to indicate when a mail was sent  to
              a mailing-list you subscribe to (default: L).

       trash
              Type: path
              Default: “”

              If  set,  this  variable  specifies the path of the trash folder
              where the mails marked for deletion will be  moved,  instead  of
              being irremediably purged.

              NOTE:  When  you  delete  a  message  in the trash folder, it is
              really deleted, so that you have a way to clean the trash.

       tunnel
              Type: string
              Default: “”

              Setting this variable will cause  mutt  to  open  a  pipe  to  a
              command  instead of a raw socket. You may be able to use this to
              set up preauthenticated connections to  your  IMAP/POP3  server.
              Example:

              tunnel=”ssh -q mailhost.net /usr/local/libexec/imapd”

              NOTE: For this example to work you must be able to log in to the
              remote machine without having to enter a password.

       use_8bitmime
              Type: boolean
              Default: no

              Warning: do not set this variable unless you are using a version
              of sendmail which supports the -B8BITMIME flag (such as sendmail
              8.8.x) or you may not be able to send mail.

              When set, Mutt will invoke “$sendmail” with the -B8BITMIME  flag
              when sending 8-bit messages to enable ESMTP negotiation.

       use_domain
              Type: boolean
              Default: yes

              When  set,  Mutt  will qualify all local addresses (ones without
              the @host portion) with the value of “$hostname”.  If unset,  no
              addresses will be qualified.

       use_envelope_from
              Type: boolean
              Default: no

              When  set, mutt will set the envelope sender of the message.  If
              “$envelope_from_address” is set, it will be used as  the  sender
              address. If not, mutt will attempt to derive the sender from the
              ”From:” header.

              Note that this information is passed to sendmail  command  using
              the  ”-f”  command line switch. Therefore setting this option is
              not useful if the “$sendmail” variable already contains ”-f”  or
              if  the  executable  pointed to by $sendmail doesn’t support the
              ”-f” switch.

       use_from
              Type: boolean
              Default: yes

              When set, Mutt will  generate  the  ‘From:’  header  field  when
              sending  messages.   If  unset,  no ‘From:’ header field will be
              generated unless the user explicitly sets one using the “my_hdr”
              command.

       use_idn
              Type: boolean
              Default: yes

              When set, Mutt will show you international domain names decoded.
              Note: You can use IDNs for addresses  even  if  this  is  unset.
              This variable only affects decoding.

       use_ipv6
              Type: boolean
              Default: yes

              When set, Mutt will look for IPv6 addresses of hosts it tries to
              contact.  If this option is unset, Mutt will restrict itself  to
              IPv4 addresses.  Normally, the default should work.

       user_agent
              Type: boolean
              Default: yes

              When  set,  mutt  will  add  a  ”User-Agent”  header to outgoing
              messages,  indicating  which  version  of  mutt  was  used   for
              composing them.

       visual
              Type: path
              Default: “”

              Specifies  the  visual  editor  to invoke when the ~v command is
              given in the builtin editor.

       wait_key
              Type: boolean
              Default: yes

              Controls whether Mutt will ask you to press a key  after  shell-
              escape, pipe-message, pipe-entry, print-message, and print-entry
              commands.

              It is also  used  when  viewing  attachments  with  “auto_view”,
              provided   that   the   corresponding   mailcap   entry   has  a
              needsterminal flag, and the external program is interactive.

              When set, Mutt will always ask for a key. When unset, Mutt  will
              wait  for a key only if the external command returned a non-zero
              status.

       weed
              Type: boolean
              Default: yes

              When set, mutt will weed headers  when  displaying,  forwarding,
              printing, or replying to messages.

       wrap
              Type: number
              Default: 0

              When  set  to  a  positive  value,  mutt will wrap text at $wrap
              characters.  When set to a negative value, mutt will  wrap  text
              so  that  there are $wrap characters of empty space on the right
              side of the terminal.

       wrap_search
              Type: boolean
              Default: yes

              Controls whether searches wrap around the end of the mailbox.

              When set, searches will wrap around the first (or last) message.
              When unset, searches will not wrap.

       wrapmargin
              Type: number
              Default: 0

              (DEPRECATED) Equivalent to setting wrap with a negative value.

       write_inc
              Type: number
              Default: 10

              When  writing  a  mailbox,  a  message  will  be  printed  every
              write_inc messages to indicate progress.  If set to  0,  only  a
              single message will be displayed before writing a mailbox.

              Also see the “$read_inc” variable.

       write_bcc
              Type: boolean
              Default: yes

              Controls  whether  mutt writes out the Bcc header when preparing
              messages to be sent.  Exim users may wish to unset this. If mutt
              is  set  to  deliver  directly  via SMTP (see “$smtp_url”), this
              option does nothing: mutt will never write out the BCC header in
              this case.

              Note:  On Debian systems, exim4 and postfix strip BCC headers by
              default.  The  above  warning  applies  to  exim3   users,   see
              /etc/Muttrc.

       xterm_icon
              Type: string
              Default: “M%?n?AIL&ail?”

              Controls   the   format   of   the   icon   title,  as  long  as
              xterm_set_titles  is  enabled.  This  string  is  identical   in
              formatting to the one used by “$status_format”.

       xterm_set_titles
              Type: boolean
              Default: no

              Controls whether mutt sets the xterm title bar and icon name (as
              long as you are in an appropriate terminal).

       xterm_title
              Type: string
              Default: “Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?”

              Controls the format of the title bar of the xterm provided  that
              xterm_set_titles  has  been  set.  This  string  is identical in
              formatting to the one used by “$status_format”.

SEE ALSO

       iconv(1),   iconv(3),   mailcap(5),   maildir(5),   mbox(5),   mutt(1),
       printf(3), regex(7), strftime(3)

       The Mutt Manual

       The Mutt home page: http://www.mutt.org/

AUTHOR

       Michael  Elkins,  and  others.   Use <mutt-dev@mutt.org> to contact the
       developers.