Provided by: yaz_2.1.18-2_i386 bug


       yaz-log - Log handling in all yaz-based programs


       yaz-XXXX [ -v loglevel,... ] [ -l logfile ]


       All  YAZ-based  programs use a common log subsystem, and should support
       common command line options for controlling it. This man page documents


       -l logfile
              Specify  the  file  where  the  log is to be written. If none is
              specified, stderr is used. The log is appended to this file.  If
              the  file  grows  overly  large,  it  is silently rotated: It is
              renamed to logfile.1 (old such file is deleted), and a new  file
              is  opened.  The  limit  defaults  to 1GB, but can be set by the

       -v loglevel
              Specify the logging level. The argument is a set  of  log  level
              names, separated by commas (no whitespace!), optionally preceded
              by a ’-’ to negate that level.  Most  programs  have  their  own
              default,  often containing fatal,warn,log, and some application-
              specific values. The default list can be cleared with  the  word
              none, or individual bits can be removed by prefixing them with a
              dash ’-’.


       Some of the log levels control the way the log is written.

       flush causes the log to be flushed after every write.   This  can  have
       serious  implications  to  performance,  and  should  not  be  used  in
       production. On the other hand, when debugging a program crash, this can
       be extremely useful. The option debug implies flush as well.

       notime  prevents  the  writing  of  time  stamps.  This is intended for
       automatic test scripts, which should produce predictable log files that
       are easy to compare.


       YAZ itself uses the following log levels:

       fatal  for fatal errors, that prevent further execution of the program.

       warn for warnings about things that should be corrected.

       debug for debugging. This flag may be used temporarily when  developing
       or  debugging  yaz,  or  a  program  that  uses  yaz. It is practically
       deprecated, you should be defining and using your own log  levels  (see

       all turns on almost all hard-coded log levels.

       loglevel  logs  information  about  the log levels used by the program.
       Every time the log level is changed, lists all bits that are on.  Every
       time  a  module asks for its log bits, this is logged. This can be used
       for getting an idea of what log levels are  available  in  any  program
       that uses yaz-log. Start the program with -v none,loglevel, and do some
       common   operations   with   it.   Another   way   is   to   grep   for
       yaz_log_module_level in the source code, as in

             find . -name ’*.[ch]’ -print |
                xargs grep yaz_log_module_level |
                grep ’"’ |
                cut -d’"’ -f2 |
                sort -u

       eventl, malloc, nmem, odr are used internally for debugging yaz.


       zoom  logs  the calls to the zoom API, which may be useful in debugging
       client applications.


       server logs  the  server  functions  on  a  high  level,  starting  up,
       listening on a port, etc.

       session logs individual sessions (connections).

       request logs a one-liner for each request (init, search, etc).

       requestdetail logs the details of every request, before it is passed to
       the back-end, and the results received from it.

       Each server program (zebra, etc) is supposed  to  define  its  own  log
       levels  in addition to these. As they depend on the server in question,
       they can not be described here. See above how to find out about them.


       See what log levels yaz-ztest is using:

           yaz-ztest -1 -v none,loglevel
           14:43:29-23/11 [loglevel] Setting log level to 4096 = 0x00001000
           14:43:29-23/11 [loglevel] Static  log bit 00000001 ’fatal’ is off
           14:43:29-23/11 [loglevel] Static  log bit 00000002 ’debug’ is off
           14:43:29-23/11 [loglevel] Static  log bit 00000004 ’warn’ is off
           14:43:29-23/11 [loglevel] Static  log bit 00000008 ’log’ is off
           14:43:29-23/11 [loglevel] Static  log bit 00000080 ’malloc’ is off
           14:43:29-23/11 [loglevel] Static  log bit 00000800 ’flush’ is off
           14:43:29-23/11 [loglevel] Static  log bit 00001000 ’loglevel’ is ON
           14:43:29-23/11 [loglevel] Static  log bit 00002000 ’server’ is off
           14:43:29-23/11 [loglevel] Dynamic log bit 00004000 ’session’ is off
           14:43:29-23/11 [loglevel] Dynamic log bit 00008000 ’request’ is off
           14:44:13-23/11 yaz-ztest [loglevel] returning log bit 0x4000 for ’session’
           14:44:13-23/11 yaz-ztest [loglevel] returning log bit 0x2000 for ’server’
           14:44:13-23/11 yaz-ztest [loglevel] returning NO log bit for ’eventl’
           14:44:20-23/11 yaz-ztest [loglevel] returning log bit 0x4000 for ’session’
           14:44:20-23/11 yaz-ztest [loglevel] returning log bit 0x8000 for ’request’
           14:44:20-23/11 yaz-ztest [loglevel] returning NO log bit for ’requestdetail’
           14:44:20-23/11 yaz-ztest [loglevel] returning NO log bit for ’odr’
           14:44:20-23/11 yaz-ztest [loglevel] returning NO log bit for ’ztest’

       See the details of the requests for yaz-ztest

          ./yaz-ztest -1 -v requestdetail
          14:45:35-23/11 yaz-ztest [server] Adding static Z3950 listener on tcp:@:9999
          14:45:35-23/11 yaz-ztest [server] Starting server ./yaz-ztest pid=32200
          14:45:38-23/11 yaz-ztest [session] Starting session from tcp: (pid=32200)
          14:45:38-23/11 yaz-ztest [requestdetail] Got initRequest
          14:45:38-23/11 yaz-ztest [requestdetail] Id:        81
          14:45:38-23/11 yaz-ztest [requestdetail] Name:      YAZ
          14:45:38-23/11 yaz-ztest [requestdetail] Version:   2.0.28
          14:45:38-23/11 yaz-ztest [requestdetail] Negotiated to v3: srch prst del extendedServices namedresults scan sort
          14:45:38-23/11 yaz-ztest [request] Init from ’YAZ’ (81) (ver 2.0.28) OK
          14:45:39-23/11 yaz-ztest [requestdetail] Got SearchRequest.
          14:45:39-23/11 yaz-ztest [requestdetail] ResultSet ’1’
          14:45:39-23/11 yaz-ztest [requestdetail] Database ’Default’
          14:45:39-23/11 yaz-ztest [requestdetail] RPN query. Type: Bib-1
          14:45:39-23/11 yaz-ztest [requestdetail]  term ’foo’ (general)
          14:45:39-23/11 yaz-ztest [requestdetail] resultCount: 7
          14:45:39-23/11 yaz-ztest [request] Search Z: @attrset Bib-1 foo  OK:7 hits
          14:45:41-23/11 yaz-ztest [requestdetail] Got PresentRequest.
          14:45:41-23/11 yaz-ztest [requestdetail] Request to pack 1+1 1
          14:45:41-23/11 yaz-ztest [requestdetail] pms=1048576, mrs=1048576
          14:45:41-23/11 yaz-ztest [request] Present: [1] 1+1  OK 1 records returned


       prefix/include/yaz/log.h prefix/src/log.c


       yaz(7) yaz-ztest(8) yaz-client(1)

                                 31 March 2006                      YAZ-LOG(7)