Provided by: cwdaemon_0.9.4-2_i386
cwdaemon - morse daemon for the serial or parallel port
cwdaemon [options] ...
Cwdaemon is a small daemon which uses the pc parallel or serial port
and a simple transistor switch to output morse code to a transmitter
from a text message sent to it via udp port 6789.
-d <device> Use a different device for keying.
-h Show summary of options.
-n Do not fork and print debug information to stdout.
-p <port> Use a different UDP port number (default = 6789).
-P <priority> Set cwdaemon priority, -20 to 20 (default = 0).
-s <speed> Set speed, value larger than 4 (default = 24).
-t <time> Set PTT delay, value from 0 to 50 ms (default = 0).
-v <volume> Set volume for soundcard output.
-V Output version information and exit.
-w <weight> Set weighting, value from -50 to 50 (default = 0).
-x <sdevice> Set sound device to be used.
Any serial device that supports getting and setting the modem control
lines can be used. On Linux, ttyS0, ttyS1, etc. will work. On FreeBSD
these devices are known as ttyd0, ttyd1, etc. On OpenBSD, these same
devices are known as tty00, tty01, etc., but may vary with platform.
For parallel ports on Linux try parport0 (default) or parport1, and on
FreeBSD, ppi0 (default), ppi1, etc. OpenBSD does not support parallel
port operation, and defaults to ’tty00’.
For completeness, a ’null’ device is provided. This device does
exactly nothing (no rig keying, no ssb keying, etc.).
Sdevice should be one of ’c’ (console), ’s’ (soundcard), ’b’ (both), or
’n’ (none). The default is console, which is the PC speaker.
The provided README in /usr/share/cwdaemon for a description of the
circuitry, usage and testing of cwdaemon.
Cwdaemon was written by Joop Stakenborg <pg4i at amsat.org>, Rein
Couperus <pa0r at amsat.org>, Wolf-Ruediger Juergens, DL2WRJ <WJuergens
at t-online.de> and Ladislav Vaiz, OK1ZIA <ok1zia at nagano.cz>. Cwlib
is taken and adapted from the unixcw package, version 2.2 by Simon
Baldwin, G0FRD. FreeBSD support mostly done by Diane Bruce, VA3DB.
OpenBSD support by Jason L. Wright, AI4JW.
Code maintainer for cwdaemon is Joop, pg4i at amsat.org.