Provided by: hylafax-server_4.4.3-1_i386
faxgetty - HylaFAX front-door process
/usr/sbin/faxgetty [ -D ] [ -p ] [ -q queue-dir ] device
faxgetty is the HylaFAX server program that listens for incoming phone
calls and either handles each call directly or hands it off to an
appropriate program. In addition faxgetty monitors modem usage and
notifies the HylaFAX scheduler process when a modem’s status changes;
e.g. when a modem is busy with an outbound call.
One faxgetty should be run for each facsimile modem on a machine.
faxgetty is typically started by init(8). faxgetty can also be used
with data-only modems; this may be desirable if some of the non-
facsimile features are important, such as the support for screening
calls according to Caller-ID information.
faxgetty listens to its facsimile modem for incoming calls and to a
FIFO special file on which it accepts command directives from
administrative commands such as faxanswer(8) and faxabort(8). faxgetty
also catches SIGTERM and SIGINT signals; cleaning up any necessary
resources before exiting.
Many aspects of faxgetty operation are controlled through a
configuration file. In particular, for faxgetty to automatically
invoke the getty(8) program to handle incoming data connections the
GettyArgs parameter must be setup in the configuration file. The
configuration file is located in the spooler hierarchy in the etc
subdirectory and is named config.devid, where devid is an identifier
derived from the name of the modem’s device file; for example ttym2 for
/dev/ttym2, term_10 for /dev/term/10. Consult hylafax-config(5) for
detailed information on the contents of configuration files.
-D This option forces faxgetty to detach itself from the
controlling tty from which it was invoked. In normal
operation faxgetty will not disassociate itself from the
-p Do not change the process priority when receiving facsimile.
Normally faxgetty will raise its priority to reduce i/o
latency. This option is useful for debugging.
-q dir The specified directory is treated as the spooling area. The
default spooling area, /var/spool/hylafax, is defined at the
time the software is built.
/var/spool/hylafax/FIFO.device FIFO special file for submitting commands
/var/spool/hylafax/etc/config.device device-specific configuration file
Consult hylafax-server(5) for a complete discussion of the structure
and content of the spooling area.
faxabort(8), faxlock(8), faxanswer(8), faxconfig(8), faxstate(8),
faxq(8), getty(8), hylafax-server(5), hylafax-config(5)
July 31, 1995 FAXGETTY(8)