Provided by: portslave_2005.04.03_i386 bug

NAME

       portslave - terminal server program.

SYNOPSIS

       portslave [+config-file] port|-

DESCRIPTION

       This manual page documents briefly the portslave, program.

       This  program  is a getty replacement that will run it’s own version of
       pppd, the user can specify their user-name via a login: prompt  or  PPP
       PAP negotiation.

       After  the  username  and  password have been supplied the user will be
       authenticated by the RADIUS protocol.

OPTIONS

       An optional first parameter is ’+config-file’ to specify  an  alternate
       config file.  The default is /etc/portslave/pslave.conf .

       The  next  parameter  is  either the port number or ’-’.  The value ’-’
       means that portslave is to use  it’s  controlling  tty  as  the  serial
       device and inspect the config file to find the RADIUS port number which
       matches that.  This was originally written for telnetd support (telnetd
       puts  a  ’-’  as  the first command line parameter) but can be used for
       other things.

       To run over the telnet protocol put  a  config  entry  similar  to  the
       following in your inetd configuration:

       telnet  stream  tcp  nowait root /usr/sbin/tcpd /usr/sbin/in.telnetd -L
       /usr/sbin/portslave

       Then in the pslave.conf file put a series of entries  specifying  every
       pseudo-tty  device  (either  ptyp0,  ptyp1,  etc  or  pts/1,  pts/2 etc
       depending on which type of device naming you use).  For the RADIUS port
       numbers  which  are  to be used for telnet connections you must specify
       the initchat as an empty string.

       If you want to run portslave over a clean  TCP  connection  (no  telnet
       protocol) then put the following in your inetd configuration:

       telnet stream tcp nowait root /usr/sbin/tcpd /usr/sbin/portslave -

AUTHOR

       This man page was written by Russell Coker <russell@coker.com.au>.  May
       be freely used and distributed without restriction.

SEE ALSO

       pslave.conf(5), pppd(8), ctlportslave(1)

Russell Coker <russell@coker.com.a2>001.11.04                      portslave(8)