Provided by: stun_0.96.dfsg-5_i386 bug

NAME

       stund - STUN protocol (Simple Traversal of UDP through NATs) Server

SYNTAX

       stund  [-v]  [-h  IP Address] [-a Secondary IP Address ] [-p port ] [-o
       port ]  [-b  ] [-m  ]

       STUN servers needs two IP addresses and two ports

DESCRIPTION

       STUN Servers are used to help clients behind  NAT  to  tunnel  incoming
       calls  through.  This  server  is  the  counterpart  to help the client
       identify the NAT and have it open the proper ports for it

OPTIONS

       -v     Verbose output.

       -h <IP Address>
              Define the Main IP Address.

       -a <IP Address>
              Define the Second IP Address.

       -p <Port>
              Set the primary port the default port value is 3478

       -o <Port>
              Set the secondary port the default port value is 3479 -b  Detach
              the process and makes the program run at the background

       -m <Port>
              Sets a starting port for the STERM server

       --help Prints useful help

EXAMPLES

       If  the  IP  addresses  of  your  NIC are 10.0.1.150 and 10.0.1.151 the
       proper and default use would be:

       stund  -h 10.0.1.150 -a 10.0.1.151

       add -b option to detach the process

       stund  -h 10.0.1.150 -a 10.0.1.151 -b

AUTHORS

       This manual page was written by Rene  Mayorga  <rmayorga@debian.org.sv>
       for  the  Debian  system  (but  may  be used by others).  Permission is
       granted to copy, distribute and/or modify this document under the terms
       of   the   GNU   General   Public  License, Version 2 any later version
       published by the Free Software Foundation.

       On Debian systems, the complete text of the GNU General Public  License
       can be found in /usr/share/common-licenses/GPL.

SEE ALSO

       stun(1)