Provided by: sane-utils_1.0.19-6ubuntu1_i386 bug

NAME

       sane-find-scanner - find SCSI and USB scanners and their device files

SYNOPSIS

       sane-find-scanner [-h|-?]  [-v] [-q] [-p] [-f] [-F filename] [devname]

DESCRIPTION

       sane-find-scanner  is a command-line tool to find SCSI and USB scanners
       and determine their Unix device files. Its primary aim is to make  sure
       that scanners can be detected by SANE backends.

       For  SCSI  scanners,  it  checks  the default generic SCSI device files
       (e.g., /dev/sg0) and /dev/scanner.  The test is done by sending a  SCSI
       inquiry  command  and  looking  for  a  device  type  of  "scanner"  or
       "processor" (some old HP scanners seem to send "processor").  So  sane-
       find-scanner  will  find  any  SCSI  scanner connected to those default
       device files even if it isn’t supported by any SANE backend.

       For USB scanners, first the  USB  kernel  scanner  device  files  (e.g.
       /dev/usb/scanner0),  /dev/usb/scanner, and /dev/usbscanner) are tested.
       The files are opened and the vendor and device ids are  determined,  if
       the  operating system supports this feature. Currently USB scanners are
       only found this way if they are supported by the Linux  scanner  module
       or  the FreeBSD or OpenBSD uscanner driver. After that test, sane-find-
       scanner tries to scan for USB devices found by the USB  library  libusb
       (if  available).  There  is  no  special USB class for scanners, so the
       heuristics used to distinguish scanners from other USB devices  is  not
       perfect.  sane-find-scanner also tries to find out the type of USB chip
       used in the scanner. If detected, it will be printed after  the  vendor
       and  product  ids.  sane-find-scanner will even find USB scanners, that
       are not supported by any SANE backend.

       sane-find-scanner won’t find most parallel port scanners,  or  scanners
       connected  to  proprietary  ports.  Some  parallel port scanners may be
       detected by sane-find-scanner -p.  At the time  of  writing  this  will
       only detect Mustek parallel port scanners.

OPTIONS

       -h, -?  Prints a short usage message.

       -v      Verbose  output.  If  used  once, sane-find-scanner shows every
               device name and the test result.  If used twice,  SCSI  inquiry
               information and the USB device descriptors are also printed.

       -q      Be quiet. Print only the devices, no comments.

       -p      Probe parallel port scanners.

       -f      Force  opening  all  explicitly  given  devices as SCSI and USB
               devices.  That’s  useful  if  sane-find-scanner  is  wrong   in
               determining the device type.

       -F filename
               filename  is a file that contains USB descriptors in the format
               of /proc/bus/usb/devices as used by  Linux.   sane-find-scanner
               tries  to  identify the chipset(s) of all USB scanners found in
               such a file. This option is  useful  for  developers  when  the
               output  of  "cat  /proc/bus/usb/devices"  is  available but the
               scanner itself isn’t.

       devname Test device file "devname". No other  devices  are  checked  if
               devname is given.

EXAMPLE

       sane-find-scanner -v
       Check  all SCSI and USB devices for available scanners and print a line
       for every device file.

       sane-find-scanner /dev/scanner
       Look for a (SCSI) scanner only at /dev/scanner and print the result.

       sane-find-scanner -p
       Probe for parallel port scanners.

SEE ALSO

       sane(7),  sane-scsi(5),   sane-usb(5),   scanimage(1),   xscanimage(1),
       xsane(1), sane-"backendname"(5)

AUTHOR

       Oliver Rauch, Henning Meier-Geinitz and others

SUPPORTED PLATFORMS

       USB  support  is  limited  to  Linux (kernel, libusb), FreeBSD (kernel,
       libusb), NetBSD  (libusb),  OpenBSD  (kernel,  libusb).  Detecting  the
       vendor and device ids only works with Linux or libusb.

       SCSI  support  is  available  on  Irix, EMX, Linux, Next, AIX, Solaris,
       FreeBSD, NetBSD, OpenBSD, and HP-UX.

BUGS

       No support for most parallel port scanners yet.
       Detection of USB chipsets is limited to a few chipsets.