Provided by: groff-base_1.18.1.1-20_i386 bug

NAME

       tbl - format tables for troff

SYNOPSIS

       tbl [ -Cv ] [ files... ]

DESCRIPTION

       This manual page describes the GNU version of tbl, which is part of the
       groff document formatting system.  tbl compiles descriptions of  tables
       embedded  within troff input files into commands that are understood by
       troff.  Normally, it should be invoked using the -t  option  of  groff.
       It is highly compatible with Unix tbl.  The output generated by GNU tbl
       cannot be processed with Unix troff; it  must  be  processed  with  GNU
       troff.   If  no files are given on the command line, the standard input
       will be read.  A filename of - will cause  the  standard  input  to  be
       read.

OPTIONS

       -C     Recognize  .TS  and  .TE even when followed by a character other
              than space or newline.

       -v     Print the version number.

USAGE

       tbl expects to find table descriptions wrapped in the .TS (table start)
       and  .TE  (table  end)  macros.  The line immediately following the .TS
       macro may contain any of the following  global  options  (ignoring  the
       case of characters -- Unix tbl only accepts options with all characters
       lowercase or all characters uppercase):

       center Centers the table (default is left-justified).  The  alternative
              keyword  name  centre  is  also  recognized  (this  is a GNU tbl
              extension).

       delim(xy)
              Use x and y as start and end delimiters for eqn(1).

       expand Makes the table as wide as the current line length.

       box    Encloses the table in a box.

       doublebox
              Encloses the table in a double box.

       allbox Encloses each item of the table in a box.

       frame  Same as box (GNU tbl only).

       doubleframe
              Same as doublebox (GNU tbl only).

       tab(x) Uses the character x instead of a tab to  separate  items  in  a
              line of input data.

       linesize(n)
              Sets lines or rules (e.g. from box) in n-point type.

       nokeep Don’t  use  diversions  to  prevent  page breaks (GNU tbl only).
              Normally tbl attempts to prevent undesirable breaks in the table
              by  using  diversions.   This  can sometimes interact badly with
              macro packages’ own  use  of  diversions,  when  footnotes,  for
              example, are used.

       decimalpoint(c)
              Set  the  character  to  be  recognized  as the decimal point in
              numeric columns (GNU tbl only).

       nospaces
              Ignore leading and trailing spaces in data items (GNU tbl only).

       The  global  options  must  end  with  a  semicolon.   There  might  be
       whitespace after an option and its argument in parentheses.

       After global options come lines describing the format of each  line  of
       the  table.   Each  such  format  line  describes one line of the table
       itself, except that the last format line (which you  must  end  with  a
       period)  describes  all  remaining  lines  of  the table.  A single key
       character describes each column of each line of the table.  You may run
       format specs for multiple lines together on the same line by separating
       them with commas.

       You may follow each key character with specifiers  that  determine  the
       font  and  point  size of the corresponding item, that determine column
       width, inter-column spacing, etc.

       The longest format line defines the number of  columns  in  the  table;
       missing format descriptors at the end of format lines are assumed to be
       ‘L’.  Extra columns in the data (which  have  no  corresponding  format
       entry) are ignored.

       The available key characters are:

       c,C    Centers item within the column.

       r,R    Right-justifies item within the column.

       l,L    Left-justifies item within the column.

       n,N    Numerically  justifies  item  in  the column: Units positions of
              numbers are aligned vertically.

       s,S    Spans previous item on the left into this column.

       a,A    Centers longest line in this column and then left-justifies  all
              other lines in this column with respect to that centered line.

       ^      Spans down entry from previous row in this column.

       _,-    Replaces this entry with a horizontal line.

       =      Replaces this entry with a double horizontal line.

       |      The  corresponding  column  becomes  a  vertical rule (if two of
              these are adjacent, a double vertical rule).

       A vertical bar to the left of the first key-letter or to the  right  of
       the last one produces a line at the edge of the table.

       Here  are  the  specifiers  that  can  appear in suffixes to column key
       letters:

       b,B    Short form of fB (make affected entries bold).

       i,I    Short form of fI (make affected entries italic).

       t,T    Start an item vertically spanning rows at the top of  its  range
              rather than vertically centering it.

       d,D    Start  an  item  vertically  spanning  rows at the bottom of its
              range rather than vertically centering it (GNU tbl only).

       v,V    Followed by a number, this indicates the vertical  line  spacing
              to  be used in a multi-line table entry.  If signed, the current
              vertical line spacing is incremented  or  decremented  (using  a
              signed number instead of a signed digit is a GNU tbl extension).
              A  vertical  line  spacing  specifier  followed  by   a   column
              separation  number  must be separated by one or more blanks.  No
              effect if the corresponding table entry isn’t a text block.

       f,F    Either of these specifiers  may  be  followed  by  a  font  name
              (either  one  or  two  characters  long),  font number (a single
              digit), or long name in parentheses (the last form is a GNU  tbl
              extension).   A one-letter font name must be separated by one or
              more blanks from whatever follows.

       p,P    Followed by a number, this does a  point  size  change  for  the
              affected   fields.    If  signed,  the  current  point  size  is
              incremented or decremented (using a signed number instead  of  a
              signed  digit  is  a GNU tbl extension).  A point size specifier
              followed by a column separation number must be separated by  one
              or more blanks.

       w,W    Minimal  column  width  value.   Must  be  followed  either by a
              troff(1) width expression in parentheses or a unitless  integer.
              If  no  unit  is  given,  en  units  are used.  Also used as the
              default line length for included text blocks.  If used  multiple
              times, the last entry takes effect.

       e,E    Make equally-spaced columns.

       u,U    Move the corresponding column up one half-line.

       z,Z    Ignore  the corresponding column for width-calculation purposes.

       A number  suffix  on  a  key  character  is  interpreted  as  a  column
       separation  in  ens  (multiplied  in proportion if the expand option is
       on).  Default separation is 3n.

       The format lines are followed by lines containing the actual  data  for
       the  table, followed finally by .TE.  Within such data lines, items are
       normally separated by tab characters (or the character  specified  with
       the  tab option).  Long input lines can be broken across multiple lines
       if the last  character  on  the  line  is  ‘\’  (which  vanishes  after
       concatenation).

       A dot starting a line, followed by anything but a digit is handled as a
       troff command, passed through without changes.  The table  position  is
       unchanged in this case.

       If  a  data  line consists of only ‘_’ or ‘=’, a single or double line,
       respectively, is drawn across the table at that point; if a single item
       in  a data line consists of only ‘_’ or ‘=’, then that item is replaced
       by a single or double line, joining its neighbours.   If  a  data  item
       consists  only  of ‘\_’ or ‘\=’, a single or double line, respectively,
       is drawn across the field  at  that  point  which  does  not  join  its
       neighbours.

       A data item consisting only of ‘\Rx’ (‘x’ any character) is replaced by
       repetitions of character ‘x’ as wide as the  column  (not  joining  its
       neighbours).

       A   data  item  consisting  only  of  ‘\^’  indicates  that  the  field
       immediately above spans downward over this row.

       A text block can be used to enter data as a single entry which would be
       too  long as a simple string between tabs.  It is started with ‘T{’ and
       closed with ‘T}’.  The latter must start a line, probably  followed  by
       other data columns (separated with tabs).

       To  change  the data format within a table, use the .T& command (at the
       start of a line).  It is followed by format  and  data  lines  (but  no
       global options) similar to the .TS request.

INTERACTION WITH EQN

       tbl(1)  should  always  be called before eqn(1) (groff(1) automatically
       takes care of the correct order of preprocessors).

GNU TBL ENHANCEMENTS

       There is no limit on the number of columns in a table, nor any limit on
       the  number of text blocks.  All the lines of a table are considered in
       deciding column widths, not just the  first  200.   Table  continuation
       (.T&) lines are not restricted to the first 200 lines.

       Numeric and alphabetic items may appear in the same column.

       Numeric and alphabetic items may span horizontally.

       tbl uses register, string, macro and diversion names beginning with the
       digit 3.  When using tbl you should avoid  using  any  names  beginning
       with a 3.

BUGS

       You should use .TS H/.TH in conjunction with a supporting macro package
       for all multi-page boxed tables.  If there is no header that  you  wish
       to  appear  at  the  top  of each page of the table, place the .TH line
       immediately after the format section.   Do  not  enclose  a  multi-page
       table within keep/release macros, or divert it in any other way.

       A text block within a table must be able to fit on one page.

       The  bp  request  cannot  be used to force a page-break in a multi-page
       table.  Instead, define BP as follows

              .de BP
              .ie\\n(.z’’ .bp \\$1
              .el \!.BP \\$1
              ..

       and use BP instead of bp.

       Using \a directly in a table to get leaders will  not  work.   This  is
       correct behaviour: \a is an uninterpreted leader.  To get leaders use a
       real leader, either by using a control A or like this:

              .ds a \a
              .TS
              tab(;);
              lw(1i) l.
              A\*a;B
              .TE

REFERENCE

       Lesk, M.E.: "TBL -- A Program to Format Tables".  For copyright reasons
       it  cannot  be  included  in  the groff distribution, but copies can be
       found with a title search on the World Wide Web.

SEE ALSO

       groff(1), troff(1)