Provided by: lam-runtime_7.1.2-1.4_i386
tping - Send echo messages to LAM nodes.
tping [-hv] [-c <count>] [-d <delay>] [-l <length>] <nodes>
-h Print the command help menu.
-v Turn OFF verbose mode.
-c <count> Send <count> messages.
-d <delay> Delay <delay> seconds between each message.
-l <length> Each message is <length> bytes long.
The tping command sends messages to, and collects replies from, a list
of nodes, via the LAM echo server. It is similar to the UNIX ping(8)
command, and is used as a quick diagnosis of the LAM network.
Unless options are specified, tping sends a 1 byte message an infinite
number of times, displaying the roundtrip time of each message as it
completes, with a delay of 1 second between roundtrips. After the loop
is broken (with keyboard interrupt, eg: ^C), tping prints statistics
about all roundtrip messages.
Echo messages to the local node.
tping -v n7 -l 1000 -c 10
Echo 1000 byte messages to node 7. Stay silent while working.
Stop after 10 roundtrips and report statistics.
There is no built-in timeout and tping will wait forever to receive an
echo. If no echo is received, due to a dead link or node, tping hangs.
Stop the process with a keyboard suspend signal (eg: ^Z) and terminate
LAM with lamhalt(1) or lamwipe(1) (although the use of lamwipe(1) is