Provided by: libpcp3-dev_2.7.4-20080507_i386
PMAPI - introduction to the Performance Metrics Application Programming
... assorted routines ...
cc ... -lpcp
Within the framework of the Performance Co-Pilot (PCP), client
applications are developed using the Performance Metrics Application
Programming Interface (PMAPI) that defines a procedural interface with
services suited to the development of applications with a particular
interest in performance metrics.
This description presents an overview of the PMAPI and the context in
which PMAPI applications are run. The PMAPI is more fully described in
the Performance Co-Pilot Programmerâ€™s Guide, and the manual pages for
the individual PMAPI routines.
PERFORMANCE METRICS - NAMES AND IDENTIFIERS
For a description of the Performance Metrics Name Space (PMNS) and
associated terms and concepts, see PCPIntro(1).
Not all PMIDs need be represented in the PMNS of every application.
For example, an application which monitors disk traffic will likely use
a name space which references only the PMIDs for I/O statistics.
Applications which use the PMAPI may have independent versions of a
PMNS, constructed from an initialization file when the application
starts; see pmLoadASCIINameSpace(3), pmLoadNameSpace(3), pmnscomp(1)
Internally (below the PMAPI) the implementation of the Performance
Metrics Collection System (PMCS) uses only the PMIDs, and a PMNS
provides an external mapping from a hierarchic taxonomy of names to
PMIDs that is convenient in the context of a particular system or
particular use of the PMAPI. For the applications programmer, the
routines pmLookupName(3) and pmNameID(3) translate between names in a
PMNS and PMIDs, and vice versa. The PMNS may be traversed using
An application using the PMAPI may manipulate several concurrent
contexts, each associated with a source of performance metrics, e.g.
pmcd(1) on some host, or an archive log of performance metrics as
created by pmlogger(1).
Contexts are identified by a â€˜â€˜handleâ€™â€™, a small integer value that is
returned when the context is created; see pmNewContext(3) and
pmDupContext(3). Some PMAPI functions require an explicit â€˜â€˜handleâ€™â€™
to identify the correct context, but more commonly the PMAPI function
is executed in the â€˜â€˜currentâ€™â€™ context. The current context may be
discovered using pmWhichContext(3) and changed using pmUseContext(3).
If a PMAPI context has not been explicitly established (or the previous
current context has been closed using pmDestroyContext(3)) then the
current PMAPI context is undefined.
In addition to the source of the performance metrics, the context also
includes the instance profile and collection time (both described
below) which controls how much information is returned, and when the
information was collected.
When performance metric values are returned across the PMAPI to a
requesting application, there may be more than one value for a
particular metric. Multiple values, or instances, for a single metric
are typically the result of instrumentation being implemented for each
instance of a set of similar components or services in a system, e.g.
independent counts for each CPU, or each process, or each disk, or each
system call type, etc. This multiplicity of values is not enumerated
in the name space but rather, when performance metrics are delivered
across the PMAPI by pmFetch(3), the format of the result accommodates
values for one or more instances, with an instance-value pair encoding
the metric value for a particular instance.
The instances are identified by an internal identifier assigned by the
agent responsible for instantiating the values for the associated
performance metric. Each instance identifier has a corresponding
external instance identifier name (an ASCII string). The routines
pmGetInDom(3), pmLookupInDom(3) and pmNameInDom(3) may be used to
enumerate all instance identifiers, and to translate between internal
and external instance identifiers.
All of the instance identifiers for a particular performance metric are
collectively known as an instance domain. Multiple performance metrics
may share the same instance domain.
If only one instance is ever available for a particular performance
metric, the instance identifier in the result from pmFetch(3) assumes
the special value PM_IN_NULL and may be ignored by the application, and
only one instance-value pair appears in the result for that metric.
Under these circumstances, the associated instance domain (as returned
via pmLookupDesc(3)) is set to PM_INDOM_NULL to indicate that values
for this metric are singular.
The difficult issue of transient performance metrics (e.g. per-
filesystem information, hot-plug replaceable hardware modules, etc.)
means that repeated requests for the same PMID may return different
numbers of values, and/or some changes in the particular instance
identifiers returned. This means applications need to be aware that
metric instantiation is guaranteed to be valid at the time of
collection only. Similar rules apply to the transient semantics of the
associated metric values. In general however, it is expected that the
bulk of the performance metrics will have instantiation semantics that
are fixed over the execution life-time of any PMAPI client.
THE TYPE OF METRIC VALUES
The PMAPI supports a wide range of format and type encodings for the
values of performance metrics, namely signed and unsigned integers,
floating point numbers, 32-bit and 64-bit encodings of all of the
above, ASCII strings (C-style, NULL byte terminated), and arbitrary
aggregates of binary data.
The type field in the pmDesc structure returned by pmLookupDesc(3)
identifies the format and type of the values for a particular
performance metric within a particular PMAPI context.
Note that the encoding of values for a particular performance metric
may be different for different PMAPI contexts, due to differences in
the underlying implementation for different contexts. However it is
expected that the vast majority of performance metrics will have
consistent value encoding across all versions of all implementations,
and hence across all PMAPI contexts.
The PMAPI supports routines to automate the handling of the various
value formats and types, particularly for the common case where
conversion to a canonical format is desired, see pmExtractValue(3) and
THE DIMENSIONALITY AND SCALE OF METRIC VALUES
Independent of how the value is encoded, the value for a performance
metric is assumed to be drawn from a set of values that can be
described in terms of their dimensionality and scale by a compact
encoding as follows. The dimensionality is defined by a power, or
index, in each of 3 orthogonal dimensions, namely Space, Time and Count
(or Events, which are dimensionless). For example I/O throughput might
be represented as Space/Time, while the running total of system calls
is Count, memory allocation is Space and average service time is
Time/Count. In each dimension there are a number of common scale
values that may be used to better encode ranges that might otherwise
exhaust the precision of a 32-bit value. This information is encoded
in the pmUnits structure which is embedded in the pmDesc structure
returned from pmLookupDesc(3).
The routine pmConvScale(3) is provided to convert values in conjunction
with the pmUnits structures that defines the dimensionality and scale
of the values for a particular performance metric as returned from
pmFetch(3), and the desired dimensionality and scale of the value the
PMAPI client wishes to manipulate.
The set of instances for performance metrics returned from a pmFetch(3)
call may be filtered or restricted using an instance profile. There is
one instance profile for each PMAPI context the application creates,
and each instance profile may include instances from one or more
The routines pmAddProfile(3) and pmDelProfile(3) may be used to
dynamically adjust the instance profile.
For each set of values for performance metrics returned via pmFetch(3)
there is an associated â€˜â€˜timestampâ€™â€™ that serves to identify when the
performance metric values were collected; for metrics being delivered
from a real-time source (i.e. pmcd(1) on some host) this would
typically be not long before they were exported across the PMAPI, and
for metrics being delivered from an archive log, this would be the time
when the metrics were written into the archive log.
There is an issue here of exactly when individual metrics may have been
collected, especially given their origin in potentially different
Performance Metric Domains, and variability in the metric updating
frequency at the lowest level of the Performance Metric Domain. The
PMCS opts for the pragmatic approach, in which the PMAPI implementation
undertakes to return all of the metrics with values accurate as of the
timestamp, to the best of our ability. The belief is that the
inaccuracy this introduces is small, and the additional burden of
accurate individual timestamping for each returned metric value is
neither warranted nor practical (from an implementation viewpoint).
Of course, in the case of collection of metrics from multiple hosts the
PMAPI client must assume the sanity of the timestamps is constrained by
the extent to which clock synchronization protocols are implemented
across the network.
A PMAPI application may call pmSetMode(3) to vary the requested
collection time, e.g. to rescan performance metrics values from the
recent past, or to â€˜â€˜fast-forwardâ€™â€™ through an archive log.
GENERAL ISSUES OF PMAPI PROGRAMMING STYLE
Across the PMAPI, all arguments and results involving a â€˜â€˜list of
somethingâ€™â€™ are declared to be arrays with an associated argument or
function value to identify the number of elements in the list. This
has been done to avoid both the varargs(3) approach and sentinel-
Where the size of a result is known at the time of a call, it is the
callerâ€™s responsibility to allocate (and possibly free) the storage,
and the called function will assume the result argument is of an
appropriate size. Where a result is of variable size and that size
cannot be known in advance (e.g. for pmGetChildren(3), pmGetInDom(3),
pmNameInDom(3), pmNameID(3), pmLookupText(3) and pmFetch(3)) the PMAPI
implementation uses a range of dynamic allocation schemes in the called
routine, with the caller responsible for subsequently releasing the
storage when no longer required. In some cases this simply involves
calls to free(3C), but in others (most notably for the result from
pmFetch(3)), special routines (e.g. pmFreeResult(3)) should be used to
release the storage.
As a general rule, if the called routine returns an error status then
no allocation will have been done, and any pointer to a variable sized
result is undefined.
Where error conditions may arise, the functions that comprise the PMAPI
conform to a single, simple error notification scheme, as follows;
+ the function returns an integer
+ values >= 0 indicate no error, and perhaps some positive status,
e.g. the number of things really processed
+ values < 0 indicate an error, with a global table of error
conditions and error messages
The PMAPI routine pmErrStr(3) translates error conditions into error
messages. By convention, the small negative values are assumed to be
negated versions of the Unix error codes as defined in <errno.h> and
the strings returned are as per strerror(3C). The larger, negative
error codes are PMAPI error conditions.
One error, common to all PMAPI routines that interact with pmcd(1) on
some host is PM_ERR_IPC, which indicates the communication link to
pmcd(1) has been lost.
Most enviroment variables are described in PCPIntro(1). In addition,
environment variables with the prefix PCP_ are used to parameterize the
file and directory names used by PCP. On each installation, the file
/etc/pcp.conf contains the local values for these variables. The
$PCP_CONF variable may be used to specify an alternative configuration
file, as described in pcp.conf(4). Values for these variables may be
obtained programatically using the pmGetConfig(3) function.
PCPIntro(1), PCPIntro(3), PMAPI(3), pmda(3), pmGetConfig(3),
pcp.conf(4) and pcp.env(4).