Provided by: libsvga1-dev_1.4.3-27_i386
joystick_init - open a joystick
typedef void (*__joystick_output) (const char *msg);
int joystick_init(int joydev, __joystick_output jo);
This function opens a joystick device. A negative value is returned on
failure, otherwise the joystick was initialized. svgalib(7) supports
several joysticks. The corresponding device node names can be
configured in libvga.config(5).
The joydev parameter indicates which joystick is to be initialized. As
of this writing svgalib support up to four joysticks joydev = 0 to
joydev = 3, although I’m not aware of hardware and kernel drivers which
handle more than joysticks 0 and 1.
It is strongly encouraged that your program allows the user to
calibrate the joystick. This is controlled by the jo parameter. If it
is NULL, no calibration is performed. Otherwise, calibration is
performed and instructions are printed to the user by calling the user
supplied jo function. It is the responsibility of this function to
print the NUL and NL terminated message pointed to by msg to the user.
The message might contain embedded NL characters and will not extend
256 characters including the terminating NUL.
Usually an fputs(msg, stdout); followed by fflush(stdout); will do, but
for your convenience you can perform the same by passing
JOY_CALIB_STDOUT for jo. gl_printf(3) is well suited for this job as
well. However, it needs some font setup first, so we do not provide a
special preprocessor constant.
It is valid to initialize an already initialized joystick. This allows
you to recalibrate the joystick at any time. The module supports older
version 0.* as well as newer version 1.* joystick device protocols.
The joystick module is basically independent from the rest of svgalib.
You can easily use it in text mode only (but why would you do that?).
If used in a graphics mode, however, it will release the joystick
devices upon a VC switch s.t. several applications can share joysticks.
Unfortunately this does not work during joystick calibration.
Therefore, you should lock the VC with vga_lockvc(3) while calibrating
in graphics mode.
Also, when using joysticks in textmode only, svgalib won’t detect VC
switches and joysticks cannot be shared among applications.
joystick_close(3) releases opened joysticks.
joystick_update(3) queries the joysticks for position changes. Note
that you must busy wait for joystick events. At least the older
version 0.* joystick devices do not allow to sleep and get informed
about new joystick events. Basically, this is a PC hardware issue in
the first place. Therefore, vga_waitevent(3) does not know about
joysticks. To use it, you must make it timeout after a few ms and
actively query the joystick for updates.
By default a handler deals with the joystick events.
joystick_getaxis(3) and joystick_getbutton(3) plus several convenience
macros joystick_button1|2|3|4, joystick_getb1|2|3|4, joystick_x|y|z,
and joystick_getx|y|z allow to query the current status of the joystick
(as it was determined during the last joystick_update() call).
The functions joystick_getnumaxes(3) and joystick_getnumbuttons(3)
query the number of axes and buttons of a joystick.
Finally, you can (un)register an own handler for the joystick events
with joystick_sethandler(3) and joystick_setdefaulthandler(3)
The simple text demo joytest(6) and the more complex graphical
mjoytest(6) demo show the use of the joystick package in some more
This function is only available in ELF versions of svgalib. Due to
backwards compatibility issues it cannot be used with shared a.out
Certain game ports seem to be unable to detect missing joysticks
properly. (This might also be a linux device driver issue). Anyway, is
using the joystick interface, allow a user of your application to
specify the number of joysticks to be used as well as to bail out the
joystick calibration (when he is not able to press a button on a
Usually <Ctrl>-C works, but you should not rely too much on it, as it
can be disabled. As a general guideline, maybe try to open and
calibrate joysticks while still in textmode. <Ctrl>-C will usually
still work then. If this succeeds, you may assume a joystick is there
for any following recalibrations in graphics mode.
svgalib(7), vgagl(7), libvga.config(5), joytest(6), mjoytest(6),
joystick_close(3), joystick_update(3), joystick_sethandler(3),
joystick_getnumbuttons(3), joystick_getaxis(3), joystick_getbutton(3),
joystick_button1(3), joystick_getb1(3), joystick_x(3),
The svgalib joystick handler was mostly done by Daniel Engstr\"om
<firstname.lastname@example.org>. Multiple joystick, VC switching support
and code to glue it into svgalib by Michael Weller <eowmob@exp-
math.uni-essen.de>. Part of the code is based on code from C. Smith and