Provided by: freebsd-manpages_7.0-2_all
dcons - dumb console device driver
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
Alternatively, to load the driver as a module at boot time, place the
following line in your kernel configuration file:
and in loader.conf(5):
The dcons device is a simple console device which just reads from and
writes to an allocated buffer for input and output respectively. It is
of no use by itself and it is supposed that the buffer is accessed via a
bus like firewire(4) or kvm(3) for interaction.
The buffer consists of 4 channels. There are 2 ports, one for the
console TTY and another is GDB port, then each port has an input channel
and an output channel.
If you want to run getty(8) on dcons, insert the following line into
ttys(5) and send a HUP signal to init(8) using kill(1).
dcons "/usr/libexec/getty std.9600" vt100 on secure
Once the fwohci(4) device is initialized to allow physical access, the
buffer can be accessed from another host via a firewire(4) bus using the
dconschat(8) application. See dconschat(8) for more details.
dcons_crom(4), ddb(4), firewire(4), fwohci(4), ttys(5), conscontrol(8),
Hidetoshi Shimokawa 〈simokawa@FreeBSD.org〉
This driver is currently under development.