Provided by: xserver-xorg-video-sisusb_0.9.0-1build2_i386
sisusb - SiS USB video driver
sisusb is an Xorg driver for SiS (Silicon Integrated Systems) video
chips that are connected via a Net2280-based USB dongle. The driver is
not accelerated, but provides support for colordepths of 8, 16 and 24
bpp as well as Render and other extensions.
The sisusb driver supports USB video cards based on the following
The SiS315E/PRO features two CRT controllers. However, in its USB
version, only the first output, referred to as "CRT1", is being used.
Please refer to xorg.conf(5) for general configuration details and to
sis(4) for more information. This manpage only covers a subset of the
Detailed information on all supported options can be obtained at
Please note that this driver requires a Linux kernel driver as well
which is included in Linux 2.6.12 and later, as well as available at
the aforementioned website.
The following driver Options are supported:
Option "HWCursor" "boolean"
Enable or disable the hardware cursor. It is not recommended to
disable the hardware cursor as this will increase the amount of
data transferred over the USB. Default: HWCursor is on.
Option "SWCursor" "boolean"
The opposite of HWCursor. This enables or disables the software
cursor. This sort of cursor is slower because the pointer must
be painted into the graphics display. This increases the amount
of data transferred over the USB significantly. Default:
SWCursor is off.
Option "CRT1Gamma" "boolean"
Enable or disable gamma correction. Default: Gamma correction
Option "DisconnectTimeout" "integer"
This option determines how the driver will react to a
disconnection of the USB device. If the integer supplied is -1,
the driver will abort the X server immediately upon
disconnection. If the value given is 0, the driver will probe
for a re-connection every 2 seconds and in case the device is
detected, re-establish the display. If the value is greater than
0, the driver will do this re-probing within the given number of
seconds and abort the server if it does not detect the device
within this time-out. Default: 0 (probe forever for device
Xorg(1), xorg.conf(5), xorgconfig(1), Xserver(1), X(7), sis(4)
http://www.winischhofer.at/linuxsisvga.shtml for more information and
Author: Thomas Winischhofer