Provided by: elinks-lite_0.11.3-8ubuntu3_i386 bug


       elinks.conf - ELinks configuration file


       set     "<option>" = <value>
       unset   "<option>" = <value>
       bind    "<keymap>" "<key>" = "<action>"
       include "<file>"


       The  elinks.conf file contains configuration information for ELinks. It
       can be used to configure the behaviour of ELinks in a wide  variety  of
       ways:  protocol  behaviour,  keybindings, colors used for rendering and
       for the user interface.

       It is read at startup  and  saved  only  when  requested.  All  options
       described  in  this document can be fully configured from within ELinks
       so no editing of elinks.conf is needed.

       Note that MIME-related options used for specifying handlers of  various
       MIME  types are NOT described in this document. Documentation for these
       options can be found at the ELinks homepage. Keybindings  can  also  be
       specified in elinks.conf. This is described in elinkskeys(5).


       The  syntax  of  the configuration file is very simple. The elinks.conf
       file is a free-form ASCII text file. The file may  contain  extra  tabs
       and  newlines  for  formatting  purposes.  Keywords  in  the  file  are
       case-sensitive. Comments may be placed anywhere within the file (except
       within  quotes). Comments begin with the # character and end at the end
       of the line.


       Some sample settings:

       # Use asynchronous DNS resolver?
       set connection.async_dns = 1
       # horizontal text margin.
       set document.browse.margin_width = 3
       # Default document codepage.
       set document.codepage.assume = "ISO-8859-1"
       # User defined protocol handlers
       set protocol.user.mailto.unix = "mutt %h -s \e\*(lq%s\e\*(rq"


              Bookmark options.

       bookmarks.file_format <num> (default: 0)
              File format for bookmarks (affects both reading and saving):

              ·  0: is the default native ELinks format

              ·  1: is XBEL universal XML bookmarks format (NO NATIONAL  CHARS

       bookmarks.folder_state [0|1] (default: 1)
              When saving bookmarks also store whether folders are expanded or
              not, so the look of the bookmark dialog is  kept  across  ELinks
              sessions.  If  disabled  all folders will appear unexpanded next
              time ELinks is run.

       config Configuration handling options.

       config.comments <num> (default: 3)
              Amount of comments automatically written to the config file:

              ·  0: is no comments are written

              ·  1: is only the "blurb" (name+type) is written

              ·  2: is only the description is written

              ·  3: is full comments are written

       config.indentation <num> (default: 2)
              Shift width of one indentation level in the configuration  file.
              Zero  means  that no indentation is performed at all when saving
              the configuration.

       config.saving_style <num> (default: 3)
              Determines what happens when you tell ELinks to save options:

              ·  0: is only values of current options are altered

              ·  1: is values of  current  options  are  altered  and  missing
                 options are added at the end of the file

              ·  2: is the configuration file is rewritten from scratch

              ·  3:  is  values  of  current  options  are altered and missing
                 options CHANGED during this ELinks session are added  at  the
                 end of the file

       config.i18n [0|1] (default: 0)
              If  set  to  1,  comments  in  the  configuration  file  will be
              translated to the language used by UI. Note  that  if  you  have
              different language set in different terminals, the language used
              in the configuration file MAY be the same  as  on  the  terminal
              where  you saved the file, but it should be generally considered

       config.saving_style_w [0|1] (default: 0)
              This is internal option used when  displaying  a  warning  about
              obsolete config.saving_style. You shouldn’t touch it.

       config.show_template [0|1] (default: 0)
              Show  template  options  in  autocreated  trees  in  the options
              manager and save them to the configuration file.

              Connection options.

              SSL options.

              X509 client certificate options.

       connection.ssl.client_cert.enable [0|1] (default: 0)
              Enable or not the sending of X509 client certificates to servers
              which request them.

       connection.ssl.client_cert.file <str> (default: "")
              The  location  of  a  file containing the client certificate and
              unencrypted private key  in  PEM  format.  If  unset,  the  file
              pointed to by the X509_CLIENT_CERT variable is used instead.

       connection.ssl.cert_verify [0|1] (default: 0)
              Verify   the  peer’s  SSL  certificate.  Note  that  this  needs
              extensive configuration of OpenSSL by the user.

       connection.async_dns [0|1] (default: 1)
              Whether to use asynchronous DNS resolving.

       connection.max_connections <num> (default: 10)
              Maximum number of concurrent connections.

       connection.max_connections_to_host <num> (default: 2)
              Maximum number of concurrent connections to a given host.

       connection.receive_timeout <num> (default: 120)
              Receive timeout (in seconds).

       connection.retries <num> (default: 3)
              Number of tries  to  establish  a  connection.  Zero  means  try

       connection.try_ipv4 [0|1] (default: 1)
              Whether  to  try  to  connect  to a host over IPv4. Note that if
              connection.try_ipv6 is enabled too,  it  takes  precedence.  And
              better do not touch this at all unless you are sure what are you
              doing. Note that you can also force a given protocol to be  used
              on  a  per-connection basis by using an URL in the style of i.e.

       connection.try_ipv6 [0|1] (default: 1)
              Whether to try to connect to a host over IPv6. Note that you can
              also force a given protocol to be used on a per-connection basis
              by using an URL in the style of i.e. http6://

       connection.unrestartable_receive_timeout <num> (default: 600)
              Timeout for non-restartable connections (in seconds).

              Cookies options.

       cookies.accept_policy <num> (default: 2)
              Cookies accepting policy:

              ·  0: is accept no cookies

              ·  1: is ask for confirmation before accepting cookie

              ·  2: is accept all cookies

       cookies.max_age <num> (default: -1)
              Cookie maximum age (in days):

              ·  -1: is use cookie’s expiration date if any

              ·  0: is force  expiration  at  the  end  of  session,  ignoring
                 cookie’s expiration date

              ·  1:  +  is  use cookie’s expiration date, but limit age to the
                 given number of days

       cookies.paranoid_security [0|1] (default: 0)
              When enabled, we’ll require three dots in cookies domain for all
              non-international  domains  (instead  of  just  two  dots). Some
              countries  have  generic  second  level  domains  (eg.,
      and  allowing  sites  to  set cookies for these generic
              domains could potentially be  very  bad.  Note,  it  is  off  by
              default as it breaks a lot of sites. [0|1] (default: 1)
              Whether cookies should be loaded from and save to disk.

       cookies.resave [0|1] (default: 1)
              Save  cookies  after each change in cookies list? No effect when
              cookie saving ( is off.

              Document options.

              Document browsing options (mainly interactivity).

              Options for handling of link access keys. An HTML  document  can
              use  the  ACCESSKEY  attribute  to  assign  an  access key to an
              element. When  an  access  key  is  pressed,  the  corresponding
              element will be given focus.

       document.browse.accesskey.auto_follow [0|1] (default: 0)
              Automatically  follow  a  link  or  submit a form if appropriate
              accesskey is pressed - this is the standard behaviour, but  it’s
              considered dangerous.

       document.browse.accesskey.display [0|1] (default: 0)
              Display access key in link info.

       document.browse.accesskey.priority <num> (default: 0)
              Priority of ’accesskey’ HTML attribute:

              ·  0:  is  first  try  all  normal  bindings; if it fails, check

              ·  1: is first try only  frame  bindings;  if  it  fails,  check

              ·  2: is first check accesskey (this can be dangerous)

              Options for handling of the forms interaction.

       document.browse.forms.auto_submit [0|1] (default: 1)
              Automagically  submit  a  form when enter is pressed with a text
              field selected.

       document.browse.forms.confirm_submit [0|1] (default: 1)
              Ask for confirmation when submitting a form.

       document.browse.forms.input_size <num> (default: 20)
              Default form input size if none is specified.

       document.browse.forms.insert_mode [0|1] (default: 1)
              The setting for this option affects how key presses are  handled
              when one selects a text-input form-field. When enabled, one must
              explicitly ’enter’  a  selected  text-field  to  edit  it;  this
              prevents text fields from capturing key presses, such as presses
              of a  scroll  key,  when  it  is  inadvertently  selected.  When
              disabled,  key  presses are always inserted into a selected text

       document.browse.forms.editor <str> (default: "")
              Path to the executable that ELinks should launch when  the  user
              requests  to edit a textarea with an external editor. If this is
              blank, ELinks will use the value of the  environmental  variable
              $EDITOR.  If  $EDITOR  is  empty  or  not  set, ELinks will then
              default to "vi".

       document.browse.forms.show_formhist [0|1] (default: 0)
              Ask if a login form should be saved to file or not. This  option
              only   disables  the  dialog,  already  saved  login  forms  are

              Options for handling of images.

       document.browse.images.display_style <num> (default: 2)
              Display style for image tags when displayed:

              ·  0: means always display IMG

              ·  1: means always display filename

              ·  2: means display alt/title attribute if possible, IMG if not

              ·  3: means display alt/title attribute if possible, filename if

       document.browse.images.filename_maxlen <num> (default: 0)
              Maximum length of image filename when displayed:

              ·  0: means always display full filename

              ·  1-500: means display filename with this maximal length; if it
                 is longer, the middle is substituted by an asterisk

       document.browse.images.image_link_tagging <num> (default: 1)
              When to enclose image links:

              ·  0: means never

              ·  1: means never if alt or title are provided (old behavior)

              ·  2: means always

       document.browse.images.image_link_prefix <str> (default: "[")
              Prefix string to use to mark image links.

       document.browse.images.image_link_suffix <str> (default: "]")
              Suffix string to use to mark image links.

       document.browse.images.label_maxlen <num> (default: 0)
              Maximum length of image label (alt/title):

              ·  0: means always display full label

              ·  1-500: means display label with this maximal length; if it is
                 longer, the middle is substituted by an asterisk

       document.browse.images.show_as_links [0|1] (default: 0)
              Display links to images without an alt attribute. If this option
              is off, these images are completely invisible.

       document.browse.images.show_any_as_links [0|1] (default: 1)
              Display links to any images in the document, regardless of  them
              having  an  alt attribute or not. If this option is off, the alt
              attribute contents is shown, but as normal text, not  selectable
              as a link.

              Options for handling of links to other documents.

              Options for the active link.

              Active link colors.

       document.browse.links.active_link.colors.background     <color|#rrggbb>
       (default: blue)
              Default background color.

       document.browse.links.active_link.colors.text <color|#rrggbb> (default:
              Default text color.

       document.browse.links.active_link.enable_color [0|1] (default: 0)
              Enable use of the active link background and text color settings
              instead of the link colors from the document.

       document.browse.links.active_link.bold [0|1] (default: 0)
              Make the active link text bold.

       document.browse.links.active_link.invert [0|1] (default: 1)
              Invert the fore- and background color so the link stands out.

       document.browse.links.active_link.underline [0|1] (default: 0)
              Underline the active link.

       document.browse.links.color_dirs [0|1] (default: 1)
              Highlight links  to  directories  in  FTP  and  local  directory

       document.browse.links.numbering [0|1] (default: 0)
              Display numbers next to the links.

       document.browse.links.target_blank <num> (default: 0)
              Define how to handle links having target=_blank set:

              ·  0: means open link in current tab

              ·  1: means open link in new tab in foreground

              ·  2: means open link in new tab in background

              ·  3: means open link in new window

       document.browse.links.use_tabindex [0|1] (default: 1)
              Whether to navigate links using tabindex specified ordering. The
              TABINDEX attribute in HTML elements specifies the order in which
              links should receive focus when using the keyboard to navigating
              the document.

       document.browse.links.missing_fragment [0|1] (default: 1)
              Open a message box when document has no tag with given id.

       document.browse.links.number_keys_select_link <num> (default: 1)
              Number keys select links rather than specify  command  prefixes.
              This is a tristate:

              ·  0: means never

              ·  1: means if document.browse.links.numbering = 1

              ·  2: means always

       document.browse.links.warn_malicious [0|1] (default: 1)
              When following a link the user ID part of the URI is checked and
              if a maliciously crafted URI is detected a warning  dialog  will
              ask before following the link.

       document.browse.links.wraparound [0|1] (default: 0)
              When  pressing  ’down’  on the last link, jump at the first one,
              and vice versa.

              Scrolling options.

       document.browse.scrolling.horizontal_extended [0|1] (default: 1)
              Whether to allow horizontal scrolling when the document does not
              extend off the screen. Useful for copy/paste operations.

       document.browse.scrolling.horizontal_step <num> (default: 8)
              Number  of  columns to scroll when a key bound to scroll-left or
              scroll- right is pressed and no prefix was given.

       document.browse.scrolling.margin <num> (default: 3)
              Size of the virtual margin -  when  you  click  inside  of  that
              margin, document scrolls in that direction.

       document.browse.scrolling.vertical_step <num> (default: 2)
              Number  of  lines  to  scroll  when  a key bound to scroll-up or
              scroll- down is pressed and no prefix was given.
              Options for searching. [0|1] (default: 0)
              Whether  the  search  should  match  the  document  text   while
              maintaining case sensitivity. <num> (default: 0)
              Enable searching with regular expressions:

              ·  0: for plain text searching

              ·  1: for basic regular expression searches

              ·  2: for extended regular expression searches [0|1] (default: 1)
              Whether  to  show a dialog when the search hits top or bottom of
              the document. [0|1] (default: 1)
              Wrap around when searching. Currently only used for typeahead. <num> (default: 2)
              How to inform the user when nothing is matched:

              ·  0: means do nothing

              ·  1: means beep the terminal

              ·  2: means pop up message box <num> (default: 0)
              Start typeahead searching when an unbound key is pressed without
              any  modifiers.  Note  that  most keys have default bindings, so
              this feature will not be useful unless you unbind them.

       when you (when you press a key bound to search-typeahead or similar)
              1 automatically starts typeahead  searching  thru  link  text  2
              automatically starts typeahead searching thru all document text

       document.browse.margin_width <num> (default: 3)
              Horizontal text margin.

       document.browse.refresh [0|1] (default: 1)
              Automatically   follow   document-specified  refresh  directives
              (<meta> refresh tags). Web-page authors use  these  to  instruct
              the  browser to reload a document at a given interval or to load
              another page.  Regardless  of  the  value  the  refresh  URI  is
              accessible        as        a        link.        Use        the
              document.browse.minimum_refresh_time  to  control  the   minimum
              number of seconds a refresh will wait.

       document.browse.minimum_refresh_time <num> (default: 1000)
              The  minimum  number  of  milliseconds  that  should pass before
              refreshing. If set to zero the document  refresh  time  is  used
              unchanged.  It can fix going back in history for some sites that
              use refreshing with zero values.

       document.browse.table_move_order [0|1] (default: 0)
              Move by columns in table, instead of rows.

              Cache options.

              Format cache options.

       document.cache.format.size <num> (default: 5)
              Number of cached formatted pages. Do not get too generous  here,
              ’formatted’  means that all the accompanying structures are kept
              in memory so that you get the cached document immediatelly,  but
              these structures may take a lot - 2x the size of the HTML source
              is probably not unusual, but it can be even more if the document
              consists of a lot of short lines (padded right, if possible) and
              links and not much other markup. So if you set this to  256  and
              then   you  don’t  like  your  ELinks  eating  90M,  don’t  come
              complaining to us. ;-) Also note that the format cache itself is
              not counted to the memory cache size, but the HTML source of the
              formatted documents is always cached, even if  it  is  over  the
              memory  cache size threshold. (Then of course no other documents
              can be cached.)

              Memory cache options.

       document.cache.memory.size <num> (default: 1048576)
              Memory cache size (in bytes).

       document.cache.cache_redirects [0|1] (default: 0)
              Cache even redirects sent by server (usually thru HTTP by a  302
              HTTP  code  and  a  Location  header).  This  was  the  original
              behaviour for a quite some time, but it  causes  problems  in  a
              situation very common to various web login systems - frequently,
              when accessing certain location, they will  redirect  you  to  a
              login  page if they don’t receive an auth cookie, the login page
              then gives you the cookie and redirects you back to the original
              page,  but  there  you  have already cached redirect back to the
              login page! If this option has value of 0, this  malfunction  is
              fixed,  but occasionally you may get superfluous (depends on how
              you take it ;-) requests to the server. If this option has value
              of  1,  experienced  users  can  still  workaround  it by clever
              combination of  usage  of  reload,  jumping  around  in  session
              history and hitting ctrl+enter. Note that this option is checked
              when retrieving the information from cache, not when  saving  it
              to  cache  - thus if you will enable it, even previous redirects
              will be taken from cache instead of asking the server.

       document.cache.ignore_cache_control [0|1] (default: 1)
              Ignore Cache-Control and Pragma server headers.  When  set,  the
              document is cached even with ’Cache-Control: no-cache’.

              Charset options.

       document.codepage.assume <codepage> (default: System)
              Default  document  codepage.  ’System’  stands  for  a  codepage
              determined by a selected locale.

       document.codepage.force_assumed [0|1] (default: 0)
              Ignore charset info sent by server.

              Default document color settings.

       document.colors.text <color|#rrggbb> (default: gray75)
              Default text color.

       document.colors.background <color|#rrggbb> (default: black)
              Default background color. <color|#rrggbb> (default: blue)
              Default link color.

       document.colors.vlink <color|#rrggbb> (default: yellow)
              Default visited link color.

       document.colors.image <color|#rrggbb> (default: darkolivegreen)
              Default image link color.

       document.colors.bookmark <color|#rrggbb> (default: hotpink)
              Default bookmarked link color.

       document.colors.dirs <color|#rrggbb> (default: yellow)
              Default directory  color.  See  document.browse.links.color_dirs

       document.colors.increase_contrast [0|1] (default: 1)
              Increase  the  contrast  between  the  foreground and background
              colors to ensure readability.  For  example  it  disallows  dark
              colors  on  a  black  background.  Note,  this is different from
              ensuring the contrast with the ensure_contrast option.

       document.colors.ensure_contrast [0|1] (default: 1)
              Makes sure that the back- and foreground color are never  equal.

       document.colors.use_document_colors <num> (default: 2)
              Use colors specified in document:

              ·  0: is use always the default settings

              ·  1: is use document colors if available, except background

              ·  2:  is  use  document  colors, including background. This can
                 mostly look very  impressive,  but  some  sites  will  appear
                 really  ugly.  Note,  that obviously if the background is not
                 black, it will break the behaviour of transparency.

              Options concerning how to use CSS for styling documents.

       document.css.enable [0|1] (default: 1)
              Enable adding of CSS style info to documents.

       document.css.import [0|1] (default: 1)
              When enabled any external style sheets that  are  imported  from
              either  CSS  itself  using  the @import keyword or from the HTML
              using  <link>  tags  in  the  document  header  will   also   be

       document.css.stylesheet <str> (default: "")
              The  path  to  the  file  containing  the  default  user defined
              Cascading Style Sheet. It can  be  used  to  control  the  basic
              layout  of HTML documents. The path is assumed to be relative to
              ELinks’ home directory. Leave as ""  to  use  built-in  document
              Options regarding files downloading and handling. <str> (default: "./")
              Default download directory. [0|1] (default: 0)
              Set  the  timestamp  of  each  downloaded  file to the timestamp
              stored on the server. <num> (default: 2)
              Prevent overwriting the local files:

              ·  0: is files will silently be overwritten

              ·  1: is add a suffix .{number} (for example ’.1’) to the name

              ·  2: is ask the user <num> (default: 0)
              Audio notification when download is completed:

              ·  0: is never

              ·  1: is when background notification is active

              ·  2: is always

              Dump output options.

       document.dump.codepage <codepage> (default: System)
              Codepage used in dump output. ’System’  stands  for  a  codepage
              determined by a selected locale.

       document.dump.footer <str> (default: "")
              Footer string used in dumps. %u is substituted by URL.

       document.dump.header <str> (default: "")
              Header string used in dumps. %u is substituted by URL.

       document.dump.numbering [0|1] (default: 1)
              Whether to print link numbers in dump output.

       document.dump.references [0|1] (default: 1)
              Whether  to  print  references  (URIs) of document links in dump

       document.dump.separator <str> (document.dump.separator <str>  (default:
       "), document.dump.width <num> (default: 80)
              Width of screen in characters when dumping documents.

              History options.
              Global history options. [0|1] (default: 1)
              Enable global history ("history of all pages visited"). <num> (default: 1024)
              Maximum number of entries in the global history. <num> (default: 0)
              What to display in global history dialog:

              ·  0: is URLs

              ·  1: is page titles

       document.history.keep_unhistory [0|1] (default: 1)
              Keep unhistory ("forward history").

              Options concerning the display of HTML pages.

       document.html.display_frames [0|1] (default: 1)
              Display frames.

       document.html.display_tables [0|1] (default: 1)
              Display tables.

       document.html.display_subs [0|1] (default: 1)
              Display subscripts (as [thing]).

       document.html.display_sups [0|1] (default: 1)
              Display superscripts (as ^thing).

       document.html.link_display <num> (default: 2)
              How to render <link> tags from the HTML header:

              ·  0: is nothing

              ·  1: is title

              ·  2: is name in addition

              ·  3: is hreflang in addition

              ·  4: is type in addition

              ·  5: is everything

       document.html.underline_links [0|1] (default: 0)
              Underline links.

       document.html.wrap_nbsp [0|1] (default: 0)
              If set do not honour non breaking space (the  nbsp  entity)  but
              allow  to  wrap  the  text.  This  can help keeping the width of
              documents down so no horizontal scrolling is needed.

              Options concerning the display of plain text pages.

       document.plain.display_links [0|1] (default: 0)
              Display URIs in the document as links.

       document.plain.compress_empty_lines [0|1] (default: 0)
              Compress successive empty lines to only one in displayed text.

              Rules for passing URIs to external commands.

       document.uri_passing._template_ <str> (default: "")
              A rule for passing URI to an external command. The format is: %c
              in  the  string means the current URL %% in the string means ’%’
              Do _not_ put single- or double-quotes around %c.

              ECMAScript options.

       ecmascript.enable [0|1] (default: 1)
              Whether to run those scripts inside of documents.

       ecmascript.error_reporting [0|1] (default: 0)
              Open a message box when a script reports an error.

       ecmascript.ignore_noscript [0|1] (default: 0)
              Whether to ignore content enclosed by the  <noscript>  tag  when
              ECMAScript is enabled.

       ecmascript.max_exec_time <num> (default: 5)
              Maximum execution time in seconds for a script.

       ecmascript.block_window_opening [0|1] (default: 0)
              Whether to disallow scripts to open new windows or tabs.

              Options for information files in ~/.elinks.

       infofiles.save_interval <num> (default: 300)
              Interval  at  which to trigger information files in ~/.elinks to
              be saved to disk if they has changed (seconds; 0 to disable)

       infofiles.secure_save [0|1] (default: 1)
              First write data to unique temporary file, then rename this file
              upon successfully finishing this. Note that this relates only to
              config files, not downloaded files. You may want to  disable  it
              if  you  are  using some exotic permissions for concerned files.
              Secure file saving is automagically disabled if file is symlink.
              Warning: some systems (ie. OS/2, Win32) require that destination
              file doesn’t exist when rename(3) is called, breaking atomicity,
              and reducing reliability of this feature.

       infofiles.secure_save_fsync [0|1] (default: 1)
              When using secure file saving, call fsync(3), if the OS supports
              it, to force the OS immediately to write the data  to  permanent
              storage.  This is optional for those who wish to avoid excessive
              disk I/O.

       mime   MIME-related options (handlers of various MIME types).

              Extension <-> MIME type association.

       mime.extension._template_ <str> (default: "")
              MIME-type matching this file extension  (’*’  is  used  here  in
              place of ’.’).

              A  file type handler is a set of information about how to use an
              external program to view a file. It is possible to refer  to  it
              for  several  MIME  types  --  e.g.,  you  can define an ’image’
              handler to which mime.type.image.png, mime.type.image.jpeg,  and
              so  on  will  refer;  or  one  might define a handler for a more
              specific type of file -- e.g., PDF files. Note you  must  define
              both  a MIME handler and a MIME type association for it to work.

              Description of this handler.

              System-specific handler description (ie. unix, unix-xwin,  ...).

       mime.handler._template_._template_.ask [0|1] (default: 1)
              Ask before opening.

       mime.handler._template_._template_.block [0|1] (default: 1)
              Block the terminal when the handler is running.

       mime.handler._template_._template_.program <str> (default: "")
              External  viewer  for this file type. ’%’ in this string will be
              substituted by a file name.

              Options for mailcap support.

       mime.mailcap.enable [0|1] (default: 1)
              Enable mailcap support.

       mime.mailcap.path                    <str>                    (default:
              Mailcap search path. Colon-separated list of files. Leave as  ""
              to use MAILCAP environment variable instead.

       mime.mailcap.ask [0|1] (default: 1)
              Ask before using the handlers defined by mailcap.

       mime.mailcap.description <num> (default: 0)
              Type of description to show in "what to do with this file" query

              ·  0: is show "mailcap"

              ·  1: is show program to be run

              ·  2: is  show  mailcap  description  field  if  any;  "mailcap"

       mime.mailcap.prioritize [0|1] (default: 1)
              Prioritize  entries  by  the  order  of the files in the mailcap
              path. This means that wildcard entries (like: image/*) will also
              be checked before deciding the handler.

              Options  for the support of mime.types files. These files can be
              used to find the content type  of  an  URL  by  looking  at  the
              extension of the file name.

       mime.mimetypes.enable [0|1] (default: 1)
              Enable mime.types support.

       mime.mimetypes.path                   <str>                   (default:
              The  search  path  for mime.types files. Colon-separated list of

              Handler <-> MIME type association. The  first  sub-tree  is  the
              MIME  class  while  the  second  sub-tree  is the MIME type (ie.
              image/gif handler will reside at mime.type.image.gif). Each MIME
              type  option  should  contain  (case-sensitive) name of the MIME
              handler (its properties are stored at mime.handler.<name>).

              Handler matching this MIME-type class (’*’ is used here in place
              of ’.’).

       mime.type._template_._template_ <str> (default: "")
              Handler  matching this MIME-type name (’*’ is used here in place
              of ’.’).

       mime.default_type <str> (default: "application/octet-stream")
              Document MIME-type to assume by default (when we are  unable  to
              guess it properly from known information about the document).

              Protocol specific options.

              BitTorrent specific options.

              Port range allowed to be used for listening on.

       protocol.bittorrent.ports.min <num> (default: 6881)
              The minimum port to try and listen on.

       protocol.bittorrent.ports.max <num> (default: 6999)
              The maximum port to try and listen on.

              Tracker options.

       protocol.bittorrent.tracker.compact [0|1] (default: 0)
              Whether to request that the tracker returns peer info in compact
              format. Note, the compact format only supports IPv4 addresses.

       protocol.bittorrent.tracker.interval <num> (default: 0)
              The number of seconds to wait  between  periodically  contacting
              the  tracker  for announcing progress and requesting more peers.
              Set to zero to use the interval requested by the tracker.

       protocol.bittorrent.tracker.ip_address <str> (default: "")
              What IP address to report to the tracker. If set  to  ""  no  IP
              address   will  be  sent  and  the  tracker  will  automatically
              determine an appropriate IP address.

       protocol.bittorrent.tracker.key <str> (default: "")
              An additional identification that is not shared with any  users.
              It  is intended to allow a client to prove their identity should
              their IP address change. It is an optional parameter,  but  some
              trackers  require  this parameter. If set to "" no user key will
              be sent to the tracker.

       protocol.bittorrent.tracker.numwant <num> (default: 50)
              The maximum number of peers to request from the tracker. Set  to
              0 to use the server default.

       protocol.bittorrent.tracker.min_skip_size <num> (default: 20)
              The  minimum  number  of  peers to have in the current peer info
              pool before skipping requesting  of  more  peers.  I.e.  setting
              numwant to zero. Set to 0 to not have any limit.

              Lowlevel peer-wire options.

       protocol.bittorrent.peerwire.connections <num> (default: 55)
              The  maximum  number  of  allowed connections to both active and
              non-active  peers.  By  increasing   the   number   of   allowed
              connections,  the  chance of finding good peers to download from
              is increased. However, too many  connections  can  lead  to  TCP
              congestion.   If   the  maximum  is  reached  all  new  incoming
              connections will be closed.

       protocol.bittorrent.peerwire.max_message_length     <num>     (default:
              The maximum length of messages to accept over the  wire.  Larger
              values will cause the connection to be dropped.

       protocol.bittorrent.peerwire.max_request_length     <num>     (default:
              The  maximum  length  to  allow  for  incoming  requests. Larger
              requests will cause the connection to be dropped.

       protocol.bittorrent.peerwire.request_length <num> (default: 16384)
              How many bytes to query for per request. This  is  complementary
              to  the  max_request_length  option. If the configured length is
              bigger than the piece length it will be truncated.

       protocol.bittorrent.peerwire.timeout <num> (default: 300)
              The number of seconds to wait before closing a socket  on  which
              nothing has been received or sent.

       protocol.bittorrent.peerwire.pool_size <num> (default: 55)
              Maximum number of items in the peer pool. The peer pool contains
              information used for establishing connections to new peers.  Set
              to 0 to have unlimited size.

       protocol.bittorrent.piece_cache_size <num> (default: 1048576)
              The  maximum  amount  of memory used to hold recently downloaded
              pieces. Set to 0 to have unlimited size.

       protocol.bittorrent.max_uploads <num> (default: 7)
              The maximum number of uploads to allow at once.

       protocol.bittorrent.min_uploads <num> (default: 2)
              The minimum number of uploads which should at least be used  for
              new connections.

       protocol.bittorrent.request_queue_size <num> (default: 5)
              How   many   piece  requests  to  continuously  keep  in  queue.
              Pipelining of requests is essential to saturate connections  and
              get  a  good  connection performance and thus a faster download.
              However, a very big queue size can  lead  to  wasting  bandwidth
              near the end of the connection since remaining piece blocks will
              be requested from multiple peers.

       protocol.bittorrent.choke_interval <num> (default: 10)
              The number of seconds between updating the connection state  and
              most  importantly  choke and unchoke peer connections. The choke
              period should be big enough for newly  unchoked  connections  to
              get  started  but  small enough to not allow freeriders too much
              room for stealing bandwidth.

       protocol.bittorrent.rarest_first_cutoff <num> (default: 4)
              The number of pieces to obtain before switching piece  selection
              strategy from random to rarest first.

       protocol.bittorrent.allow_blacklist [0|1] (default: 1)
              Allow blacklisting of buggy peers.

              Options specific to local browsing.

              Local CGI specific options.

       protocol.file.cgi.path <str> (default: "")
              Colon  separated  list  of  directories,  where  CGI scripts are

       protocol.file.cgi.policy [0|1] (default: 0)
              Whether to execute local CGI scripts.

       protocol.file.allow_special_files [0|1] (default: 0)
              Whether to allow reading from non-regular files. Note  this  can
              be  dangerous;  reading  /dev/urandom or /dev/zero can ruin your

       protocol.file.show_hidden_files [0|1] (default: 1)
              When set to false, files with name starting with a dot  will  be
              hidden in local directories listing.

       protocol.file.try_encoding_extensions [0|1] (default: 1)
              When set, if we can’t open a file named ’filename’, we’ll try to
              open ’filename’  with  some  encoding  extension  appended  (ie.
              ’filename.gz’); it depends on the supported encodings.

              FSP specific options.

       protocol.fsp.sort [0|1] (default: 1)
              Whether to sort entries in directory listings.

              FTP specific options.

              FTP proxy configuration. <str> (default: "")
              Host  and port-number (host:port) of the FTP proxy, or blank. If
              it’s blank, FTP_PROXY environment variable is checked as well.

       protocol.ftp.anon_passwd <str> (default: "some@host.domain")
              FTP anonymous password to be sent.

       protocol.ftp.use_pasv [0|1] (default: 1)
              Use PASV instead of PORT (passive vs active mode, IPv4 only).

       protocol.ftp.use_epsv [0|1] (default: 0)
              Use EPSV instead of EPRT (passive vs active mode, IPv6 only).

              HTTP-specific options.

              Server-side HTTP bugs workarounds.

       protocol.http.bugs.accept_charset [0|1] (default: 1)
              The Accept-Charset header is  quite  long  and  sending  it  can
              trigger bugs in some rarely found servers.

       protocol.http.bugs.allow_blacklist [0|1] (default: 1)
              Allow blacklisting of buggy servers.

       protocol.http.bugs.broken_302_redirect [0|1] (default: 1)
              Broken 302 redirect (violates RFC but compatible with Netscape).
              This is a problem for a lot of web  discussion  boards  and  the
              like.  If  they  will do strange things to you, try to play with

       protocol.http.bugs.post_no_keepalive [0|1] (default: 0)
              Disable keepalive connection after POST request.

       protocol.http.bugs.http10 [0|1] (default: 0)
              Use HTTP/1.0 protocol instead of HTTP/1.1.

              HTTP proxy configuration. <str> (default: "")
              Host and port-number (host:port) of the HTTP proxy, or blank. If
              it’s  blank, HTTP_PROXY environment variable is checked as well.

       protocol.http.proxy.user <str> (default: "")
              Proxy authentication username.

       protocol.http.proxy.passwd <str> (default: "")
              Proxy authentication password.

              HTTP referer sending options. HTTP referer is a  special  header
              sent  in  the  HTTP  requests,  which is supposed to contain the
              previous page visited by the browser. This way, the  server  can
              know what link did you follow when accessing that page. However,
              this behaviour can unfortunately considerably affect privacy and
              can  lead  even to a security problem on some badly designed web

       protocol.http.referer.policy <num> (default: 3)
              Mode of sending HTTP referer:

              ·  0: is send no referer

              ·  1: is send current URL as referer

              ·  2: is send fixed fake referer

              ·  3: is send previous URL as referer (correct, but insecure)

       protocol.http.referer.fake <str> (default: "")
              Fake referer to be sent when policy is 2.

       protocol.http.accept_language <str> (default: "")
              Send Accept-Language header.

       protocol.http.accept_ui_language [0|1] (default: 1)
              Request localised versions of documents from web-servers  (using
              the   Accept-Language   header)  using  the  language  you  have
              configured  for  ELinks’  user-interface  (this   also   affects
              navigator.language  ECMAScript value available to scripts). Note
              that some see this as a potential security risk because it tells
              web-masters and the FBI sniffers about your language preference.

       protocol.http.trace [0|1] (default: 0)
              If active, all HTTP requests are sent with TRACE as their method
              rather  than  GET  or POST. This is useful for debugging of both
              ELinks and various  server-side  scripts  ---  the  server  only
              returns  the  client’s request back to the client verbatim. Note
              that this type of request may not be enabled on all servers.

       protocol.http.user_agent  <str>  (default:  "ELinks/%v  (textmode;  %s;
              Change the User Agent  ID.  That  means  identification  string,
              which  is  sent to HTTP server when a document is requested. The
              ’textmode’ token in the first field is  our  silent  attempt  to
              establish  this  as  a standard for new textmode user agents, so
              that the webmasters can have just  a  single  uniform  test  for
              these  if  they  are  ie.  pushing  some  lite  version  to them
              automagically. %v in the string means ELinks version %s  in  the
              string  means  system identification %t in the string means size
              of the terminal %b in the string means number of bars  displayed
              by  ELinks Use " " if you don’t want any User-Agent header to be
              sent at all.

              HTTPS-specific options.

              HTTPS proxy configuration. <str> (default: "")
              Host and port-number (host:port) of the HTTPS CONNECT proxy,  or
              blank.  If  it’s  blank,  HTTPS_PROXY  environment  variable  is
              checked as well.

              NNTP and news specific options.

       protocol.nntp.server <str> (default: "")
              Used when resolving news: URIs. If set to the empty  string  the
              value of the NNTPSERVER environment variable will be used.

       protocol.nntp.header_entries               <str>              (default:
              Comma  separated  list of which entries in the article header to
              show. E.g. ’Subject’ and From. All header entries can be read in
              the header info dialog.

              Rules for rewriting URIs entered in the goto dialog. It makes it
              possible to define a set of prefixes that will  be  expanded  if
              they match a string entered in the goto dialog. The prefixes can
              be dumb, meaning that they work only like URI abbreviations,  or
              smart  ones,  making  it possible to pass arguments to them like
              search engine keywords.

              Dumb prefixes, see enable-dumb description for details.

       protocol.rewrite.dumb._template_ <str> (default: "")
              Replacement URI for this dumbprefix: %c in the string means  the
              current URL %% in the string means ’%’
              Smart prefixes, see enable-smart description for details. <str> (default: "")
              Replacement URI for this smartprefix: %c in the string means the
              current URL %s  in  the  string  means  the  whole  argument  to
              smartprefix  %0,%1,...,%9  means argument 0, 1, ..., 9 %% in the
              string means ’%’

       protocol.rewrite.default_template <str> (default: "")
              Default URI template used when the string entered  in  the  goto
              dialog  does not appear to be a URI or a filename (i.e. contains
              no ’.’, : or / characters),  and  does  not  match  any  defined
              prefixes.  Set  the  value  to  "" to disable use of the default
              template rewrite rule.

       protocol.rewrite.enable-dumb [0|1] (default: 1)
              Enable dumb prefixes - simple URI  abbreviations  which  can  be
              written  to the Goto URL dialog instead of actual URIs - i.e. if
              you write ’elinks’ there, you are directed to

       protocol.rewrite.enable-smart [0|1] (default: 1)
              Enable smart prefixes - URI templates triggered by writing given
              abbreviation to the Goto  URL  dialog  followed  by  a  list  of
              arguments   from  which  the  actual  URI  is  composed  -  i.e.
              ’gg:search keywords’ or gn search keywords for news.

              SAMBA specific options.

       protocol.smb.credentials <str> (default: "")
              Credentials file passed to smbclient via -A option.

              User protocols. Options in this tree specify  external  handlers
              for the appropriate protocols. Ie. protocol.user.mailto.unix.

              Handler  (external  program) for this protocol. Name the options
              in this tree after your system (ie. unix, unix-xwin).

       protocol.user._template_._template_ <str> (default: "")
              Handler (external program) for this protocol and system.  %f  in
              the  string  means file name to include form data from %h in the
              string means hostname (or email address) %p in the string  means
              port  %d in the string means path (everything after the port) %s
              in the string means subject (?subject=<this>) %u in  the  string
              means the whole URL

       protocol.no_proxy <str> (default: "")
              Comma  separated  list of domains for which the proxy (HTTP/FTP)
              should be disabled. Optionally, a port can be specified for some
              domains as well. If it’s blank, NO_PROXY environment variable is
              checked as well.

              Terminal options.

              Options specific to  this  terminal  type  (according  to  $TERM

       terminal._template_.type <num> (default: 0)
              Terminal  type;  matters  mostly  only  when  drawing frames and
              dialog box borders:

              ·  0: is dumb terminal type, ASCII art

              ·  1: is VT100, simple but portable

              ·  2: is Linux, you get double frames and other goodies

              ·  3: is KOI-8

              ·  4: is FreeBSD

       terminal._template_.m11_hack [0|1] (default: 0)
              Switch fonts when drawing lines, enabling both local  characters
              and  lines working at the same time. Makes sense only with linux

       terminal._template_.utf_8_io [0|1] (default: 0)
              Enable I/O in UTF8 for Unicode terminals. Note  that  currently,
              only  the subset of UTF8 according to terminal codepage is used.

       terminal._template_.restrict_852 [0|1] (default: 0)
              Restrict the characters used when  drawing  lines.  Makes  sense
              only with linux terminals using the cp850/852 character sets.

       terminal._template_.block_cursor [0|1] (default: 0)
              Move  cursor  to  bottom right corner when done drawing. This is
              particularly useful  when  we  have  a  block  cursor,  so  that
              inversed text is displayed correctly.

       terminal._template_.colors <num> (default: 0)
              The  color  mode  controls what colors are used and how they are
              output to the terminal. The color modes are:

              ·  0: is mono mode, only 2 colors are used

              ·  1: is 16 color mode, uses the common ANSI colors

              ·  2: is 256 color mode, uses XTerm RGB codes

       terminal._template_.transparency [0|1] (default: 1)
              If  we  should  not  set  the  background  to  black.  This   is
              particularly  useful  when we have a terminal (typically in some
              windowing environment) with a background image or a  transparent
              background  -  it  will  be visible in ELinks as well. Note that
              this option makes sense only when colors are enabled.

       terminal._template_.underline [0|1] (default: 0)
              If we should use underline or enhance the color instead.

       terminal._template_.charset <codepage> (default: System)
              Codepage of charset used for  displaying  content  on  terminal.
              ’System’  stands for a codepage determined by a selected locale.

       ui     User interface options.

              Digital clock in the status bar.

       ui.clock.enable [0|1] (default: 0)
              Whether to display a digital clock in the status bar.

       ui.clock.format <str> (default: "[%H:%M]")
              Format string for the digital clock. See the strftime(3) manpage
              for details.

              Default user interface color settings.

              Color settings for color terminal.

              Main menu bar colors.

              Unselected main menu bar item colors.

       ui.colors.color.mainmenu.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.mainmenu.normal.background   <color|#rrggbb>  (default:
              Default background color.

              Selected main menu bar item colors.

       ui.colors.color.mainmenu.selected.text <color|#rrggbb> (default: green)
              Default text color.

       ui.colors.color.mainmenu.selected.background  <color|#rrggbb> (default:
              Default background color.

              Main menu hotkey colors.

              Main menu unselected hotkey colors.

       ui.colors.color.mainmenu.hotkey.normal.text  <color|#rrggbb>  (default:
              Default text color.

       ui.colors.color.mainmenu.hotkey.normal.background       <color|#rrggbb>
       (default: white)
              Default background color.

              Main menu selected hotkey colors.

       ui.colors.color.mainmenu.hotkey.selected.text <color|#rrggbb> (default:
              Default text color.

       ui.colors.color.mainmenu.hotkey.selected.background     <color|#rrggbb>
       (default: green)
              Default background color.
              Menu bar colors.
              Unselected menu item colors. <color|#rrggbb> (default: black)
              Default text color. <color|#rrggbb> (default: white)
              Default background color.
              Selected menu item colors. <color|#rrggbb> (default: black)
              Default text color.    <color|#rrggbb>   (default:
              Default background color.
              Marked menu item colors. <color|#rrggbb> (default: red)
              Default text color. <color|#rrggbb> (default: white)
              Default background color.
              Menu item hotkey colors.
              Menu item unselected hotkey colors.    <color|#rrggbb>    (default:
              Default text color. <color|#rrggbb> (default:
              Default background color.
              Menu item selected hotkey colors.   <color|#rrggbb>   (default:
              Default text color.         <color|#rrggbb>
       (default: green)
              Default background color.
              Menu frame colors. <color|#rrggbb> (default: black)
              Default text color. <color|#rrggbb> (default: white)
              Default background color.

              Dialog colors.

              Generic dialog colors.

       ui.colors.color.dialog.generic.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.generic.background   <color|#rrggbb>   (default:
              Default background color.

              Dialog frame colors.

       ui.colors.color.dialog.frame.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.frame.background    <color|#rrggbb>    (default:
              Default background color.

              Scrollbar colors.

       ui.colors.color.dialog.scrollbar.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.scrollbar.background  <color|#rrggbb>  (default:
              Default background color.

              Scrollbar selected colors.

       ui.colors.color.dialog.scrollbar-selected.text          <color|#rrggbb>
       (default: black)
              Default text color.

       ui.colors.color.dialog.scrollbar-selected.background    <color|#rrggbb>
       (default: green)
              Default background color.

              Dialog title colors.

       ui.colors.color.dialog.title.text <color|#rrggbb> (default: darkred)
              Default text color.

       ui.colors.color.dialog.title.background    <color|#rrggbb>    (default:
              Default background color.

              Dialog text colors.

       ui.colors.color.dialog.text.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.text.background <color|#rrggbb> (default: white)
              Default background color.

              Dialog checkbox colors.

       ui.colors.color.dialog.checkbox.text <color|#rrggbb> (default: darkred)
              Default text color.

       ui.colors.color.dialog.checkbox.background   <color|#rrggbb>  (default:
              Default background color.

              Dialog selected checkbox colors.

       ui.colors.color.dialog.checkbox-selected.text <color|#rrggbb> (default:
              Default text color.

       ui.colors.color.dialog.checkbox-selected.background     <color|#rrggbb>
       (default: green)
              Default background color.

              Dialog checkbox label colors.

       ui.colors.color.dialog.checkbox-label.text   <color|#rrggbb>  (default:
              Default text color.

       ui.colors.color.dialog.checkbox-label.background        <color|#rrggbb>
       (default: white)
              Default background color.

              Dialog button colors.

       ui.colors.color.dialog.button.text <color|#rrggbb> (default: white)
              Default text color.

       ui.colors.color.dialog.button.background    <color|#rrggbb>   (default:
              Default background color.

              Dialog selected button colors.

       ui.colors.color.dialog.button-selected.text  <color|#rrggbb>  (default:
              Default text color.

       ui.colors.color.dialog.button-selected.background       <color|#rrggbb>
       (default: green)
              Default background color.

              Dialog button colors.

       ui.colors.color.dialog.button-shortcut.text  <color|#rrggbb>  (default:
              Default text color.

       ui.colors.color.dialog.button-shortcut.background       <color|#rrggbb>
       (default: blue)
              Default background color.

              Dialog selected button colors.

       ui.colors.color.dialog.button-shortcut-selected.text    <color|#rrggbb>
       (default: white)
              Default text color.

       <color|#rrggbb> (default: blue)
              Default background color.

              Dialog text field colors.

       ui.colors.color.dialog.field.text <color|#rrggbb> (default: white)
              Default text color.

       ui.colors.color.dialog.field.background <color|#rrggbb> (default: blue)
              Default background color.

              Dialog field text colors.

       ui.colors.color.dialog.field-text.text     <color|#rrggbb>    (default:
              Default text color.

       ui.colors.color.dialog.field-text.background  <color|#rrggbb> (default:
              Default background color.

              Dialog meter colors.

       ui.colors.color.dialog.meter.text <color|#rrggbb> (default: white)
              Default text color.

       ui.colors.color.dialog.meter.background <color|#rrggbb> (default: blue)
              Default background color.

              Dialog shadow colors (see ui.shadows option).

       ui.colors.color.dialog.shadow.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.dialog.shadow.background    <color|#rrggbb>   (default:
              Default background color.

              Title bar colors.

              Generic title bar colors.

       ui.colors.color.title.title-bar.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.title.title-bar.background   <color|#rrggbb>  (default:
              Default background color.

              Title bar text colors.

       ui.colors.color.title.title-text.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.title.title-text.background  <color|#rrggbb>  (default:
              Default background color.

              Status bar colors.

              Generic status bar colors.

       ui.colors.color.status.status-bar.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.status.status-bar.background  <color|#rrggbb> (default:
              Default background color.

              Status bar text colors.

       ui.colors.color.status.status-text.text    <color|#rrggbb>    (default:
              Default text color.

       ui.colors.color.status.status-text.background <color|#rrggbb> (default:
              Default background color.

              Tabs bar colors.

              Tab  colors  for  tabs  that  have  not been selected since they
              completed loading.

       ui.colors.color.tabs.unvisited.text <color|#rrggbb> (default: darkblue)
              Default text color.

       ui.colors.color.tabs.unvisited.background   <color|#rrggbb>   (default:
              Default background color.

              Unselected tab colors.

       ui.colors.color.tabs.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.tabs.normal.background <color|#rrggbb> (default: white)
              Default background color.

              Tab colors for tabs that are loading in the background.

       ui.colors.color.tabs.loading.text <color|#rrggbb> (default: darkred)
              Default text color.

       ui.colors.color.tabs.loading.background    <color|#rrggbb>    (default:
              Default background color.

              Selected tab colors.

       ui.colors.color.tabs.selected.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.tabs.selected.background   <color|#rrggbb>    (default:
              Default background color.

              Tab separator colors.

       ui.colors.color.tabs.separator.text <color|#rrggbb> (default: brown)
              Default text color.

       ui.colors.color.tabs.separator.background   <color|#rrggbb>   (default:
              Default background color.

              Searched string highlight colors.

       ui.colors.color.searched.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.color.searched.background <color|#rrggbb> (default: lime)
              Default background color.

              Color settings for non-color terminal.

              Main menu bar colors.

              Unselected main menu bar item colors.

       ui.colors.mono.mainmenu.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.mainmenu.normal.background   <color|#rrggbb>   (default:
              Default background color.

              Selected main menu bar item colors.

       ui.colors.mono.mainmenu.selected.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.mainmenu.selected.background  <color|#rrggbb>  (default:
              Default background color.

              Main menu hotkey colors.

              Main menu unselected hotkey colors.

       ui.colors.mono.mainmenu.hotkey.normal.text  <color|#rrggbb>   (default:
              Default text color.

       ui.colors.mono.mainmenu.hotkey.normal.background        <color|#rrggbb>
       (default: white)
              Default background color.

              Main menu selected hotkey colors.

       ui.colors.mono.mainmenu.hotkey.selected.text <color|#rrggbb>  (default:
              Default text color.

       ui.colors.mono.mainmenu.hotkey.selected.background      <color|#rrggbb>
       (default: white)
              Default background color.
              Menu bar colors.
              Unselected menu item colors. <color|#rrggbb> (default: black)
              Default text color. <color|#rrggbb> (default: white)
              Default background color.
              Selected menu item colors. <color|#rrggbb> (default: gray)
              Default text color.    <color|#rrggbb>    (default:
              Default background color.
              Marked menu item colors. <color|#rrggbb> (default: gray)
              Default text color. <color|#rrggbb> (default: white)
              Default background color.
              Menu item hotkey colors.
              Menu item unselected hotkey colors. <color|#rrggbb> (default: gray)
              Default text color. <color|#rrggbb>  (default:
              Default background color.
              Menu item selected hotkey colors.   <color|#rrggbb>    (default:
              Default text color.          <color|#rrggbb>
       (default: black)
              Default background color.
              Menu frame colors. <color|#rrggbb> (default: black)
              Default text color. <color|#rrggbb> (default: white)
              Default background color.

              Dialog colors.

              Generic dialog colors.

       ui.colors.mono.dialog.generic.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.generic.background   <color|#rrggbb>    (default:
              Default background color.

              Dialog frame colors.

       ui.colors.mono.dialog.frame.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.frame.background <color|#rrggbb> (default: white)
              Default background color.

              Scrollbar colors.

       ui.colors.mono.dialog.scrollbar.text <color|#rrggbb> (default: white)
              Default text color.

       ui.colors.mono.dialog.scrollbar.background  <color|#rrggbb>   (default:
              Default background color.

              Scrollbar selected colors.

       ui.colors.mono.dialog.scrollbar-selected.text <color|#rrggbb> (default:
              Default text color.

       ui.colors.mono.dialog.scrollbar-selected.background     <color|#rrggbb>
       (default: white)
              Default background color.

              Dialog title colors.

       ui.colors.mono.dialog.title.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.dialog.title.background <color|#rrggbb> (default: black)
              Default background color.

              Dialog text colors.

       ui.colors.mono.dialog.text.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.text.background <color|#rrggbb> (default: white)
              Default background color.

              Dialog checkbox colors.

       ui.colors.mono.dialog.checkbox.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.checkbox.background   <color|#rrggbb>   (default:
              Default background color.

              Dialog selected checkbox colors.

       ui.colors.mono.dialog.checkbox-selected.text <color|#rrggbb>  (default:
              Default text color.

       ui.colors.mono.dialog.checkbox-selected.background      <color|#rrggbb>
       (default: black)
              Default background color.

              Dialog checkbox label colors.

       ui.colors.mono.dialog.checkbox-label.text   <color|#rrggbb>   (default:
              Default text color.

       ui.colors.mono.dialog.checkbox-label.background         <color|#rrggbb>
       (default: white)
              Default background color.

              Dialog button colors.

       ui.colors.mono.dialog.button.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.button.background    <color|#rrggbb>    (default:
              Default background color.

              Dialog selected button colors.

       ui.colors.mono.dialog.button-selected.text  <color|#rrggbb>   (default:
              Default text color.

       ui.colors.mono.dialog.button-selected.background        <color|#rrggbb>
       (default: black)
              Default background color.

              Dialog button colors.

       ui.colors.mono.dialog.button-shortcut.text  <color|#rrggbb>   (default:
              Default text color.

       ui.colors.mono.dialog.button-shortcut.background        <color|#rrggbb>
       (default: black)
              Default background color.

              Dialog selected button colors.

       ui.colors.mono.dialog.button-shortcut-selected.text     <color|#rrggbb>
       (default: black)
              Default text color.

       <color|#rrggbb> (default: white)
              Default background color.

              Dialog text field colors.

       ui.colors.mono.dialog.field.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.dialog.field.background <color|#rrggbb> (default: black)
              Default background color.

              Dialog field text colors.

       ui.colors.mono.dialog.field-text.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.dialog.field-text.background  <color|#rrggbb>  (default:
              Default background color.

              Dialog meter colors.

       ui.colors.mono.dialog.meter.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.dialog.meter.background <color|#rrggbb> (default: black)
              Default background color.

              Dialog shadow colors (see ui.shadows option).

       ui.colors.mono.dialog.shadow.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.dialog.shadow.background    <color|#rrggbb>    (default:
              Default background color.

              Title bar colors.

              Generic title bar colors.

       ui.colors.mono.title.title-bar.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.title.title-bar.background   <color|#rrggbb>   (default:
              Default background color.

              Title bar text colors.

       ui.colors.mono.title.title-text.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.title.title-text.background  <color|#rrggbb>   (default:
              Default background color.

              Status bar colors.

              Generic status bar colors.

       ui.colors.mono.status.status-bar.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.status.status-bar.background  <color|#rrggbb>  (default:
              Default background color.

              Status bar text colors.

       ui.colors.mono.status.status-text.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.status.status-text.background <color|#rrggbb>  (default:
              Default background color.

              Tabs bar colors.

              Tab colors for tabs that  have  not  been  selected  since  they
              completed loading.

       ui.colors.mono.tabs.unvisited.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.tabs.unvisited.background    <color|#rrggbb>   (default:
              Default background color.

              Unselected tab colors.

       ui.colors.mono.tabs.normal.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.tabs.normal.background <color|#rrggbb> (default: white)
              Default background color.

              Tab colors for tabs that are loading in the background.

       ui.colors.mono.tabs.loading.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.tabs.loading.background <color|#rrggbb> (default: white)
              Default background color.

              Selected tab colors.

       ui.colors.mono.tabs.selected.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.tabs.selected.background    <color|#rrggbb>    (default:
              Default background color.

              Tab separator colors.

       ui.colors.mono.tabs.separator.text <color|#rrggbb> (default: gray)
              Default text color.

       ui.colors.mono.tabs.separator.background    <color|#rrggbb>   (default:
              Default background color.

              Searched string highlight colors.

       ui.colors.mono.searched.text <color|#rrggbb> (default: black)
              Default text color.

       ui.colors.mono.searched.background <color|#rrggbb> (default: white)
              Default background color.

              Dialogs-specific appearance and behaviour settings.

       ui.dialogs.listbox_min_height <num> (default: 10)
              Minimal height of the listbox widget (used e.g. for bookmarks or
              global history).

       ui.dialogs.shadows [0|1] (default: 0)
              Make dialogs drop shadows (the shadows are solid, you can adjust
              their  color by ui.colors.*.dialog.shadow). You may also want to
              eliminate the wide borders by adjusting setup.h.

       ui.dialogs.underline_hotkeys [0|1] (default: 0)
              Whether to underline hotkeys in menus to make them more visible.
              Requires the underlining is enabled for the terminal.

       ui.dialogs.underline_button_shortcuts [0|1] (default: 0)
              Whether to underline button shortcuts to make them more visible.
              Requires the underlining is enabled for the terminal.

              LEDs (visual indicators) options.

       ui.leds.enable [0|1] (default: 0)
              Enable LEDs. These  visual  indicators  will  inform  you  about
              various states.

              Sessions settings.

       ui.sessions.auto_restore [0|1] (default: 0)
              Automatically   restore  the  session  at  start.  This  feature
              requires bookmark support.

       ui.sessions.auto_save [0|1] (default: 0)
              Automatically save  the  session  when  quitting.  This  feature
              requires bookmark support.

       ui.sessions.auto_save_foldername <str> (default: "Auto saved session")
              Name  of the bookmarks folder used for auto saving and restoring
              session. The name has to be unique. Any folders  with  the  same
              name  will  be  deleted.  This  only  makes  sense with bookmark

       ui.sessions.homepage <str> (default: "")
              The URI to load either at startup time when no URI was given  on
              the  command line or when requested by the goto-url-home action.
              Set to "" if the environment variable WWW_’HOME’ should be  used
              as homepage URI instead.

       ui.sessions.keep_session_active [0|1] (default: 0)
              Keep the session active even if the last terminal exits.

       ui.sessions.snapshot [0|1] (default: 0)
              Automatically  save  a  snapshot  of all tabs periodically. This
              will periodically bookmark  the  tabs  of  each  terminal  in  a
              separate folder for recovery after a crash.

              Window tabs settings.

       ui.tabs.show_bar <num> (default: 1)
              Show tabs bar on the screen:

              ·  0: means never

              ·  1: means only if two or more tabs are open

              ·  2: means always

       ui.tabs.wraparound [0|1] (default: 1)
              When  moving right from the last tab, jump at the first one, and
              vice versa.

       ui.tabs.confirm_close [0|1] (default: 0)
              When closing a tab show confirmation dialog.

              Timed action after certain interval of user inactivity.  Someone
              can even find this useful, although you may not believe that.

       ui.timer.enable <num> (default: 0)
              Whether to enable the timer or not:

              ·  0: is don’t count down anything

              ·  1: is count down, but don’t show the timer

              ·  2: is count down and show the timer near LEDs

       ui.timer.duration <num> (default: 86400)
              Inactivity  timeout in seconds. The maximum of one day should be
              enough for just everyone â¢.

       ui.timer.action <str> (default: "")
              Keybinding action to be triggered when timer reaches zero.

       ui.date_format <str> (default: "%b %e %H:%M")
              Date format to use in dialogs. See strftime(3).

       ui.language <language> (default: "System")
              Language of user interface. ’System’  means  that  the  language
              will be extracted from the environment dynamically.

       ui.show_status_bar [0|1] (default: 1)
              Show status bar on the screen.

       ui.show_title_bar [0|1] (default: 1)
              Show title bar on the screen.

       ui.startup_goto_dialog [0|1] (default: 1)
              Pop  up  goto  dialog  in  newly  created  tabs  when there’s no
              homepage set. This means also showing goto dialog on startup.

       ui.success_msgbox [0|1] (default: 1)
              When you pressed a [ Save ] button in some manager, this  option
              will  make  sure  that a box confirming success of the operation
              will pop up.

       ui.window_title [0|1] (default: 1)
              Set the window title when running in a windowing environment  in
              an  xterm-like  terminal. This way the document’s title is shown
              on the window titlebar.

              Generated using output from ELinks version 0.11.0.GIT.


       elinks(1), elinkskeys(5)