Provided by: crash_4.0-6.3-1ubuntu2_i386
crash - Analyze Linux crash data or a live system
crash [ -h [ opt ] ] [ -v ] [ -s ] [ -i file ] [ -d num ] [ -S ] [
mapfile ] [ namelist ] [ dumpfile ]
Crash is a tool for interactively analyzing the state of the Linux
system while it is running, or after a kernel crash has occurred and a
core dump has been created by the Red Hat netdump, diskdump, kdump, or
xendump facilities. It is loosely based on the SVR4 UNIX crash
command, but has been significantly enhanced by completely merging it
with the gdb debugger. The marriage of the two effectively combines the
kernel-specific nature of the traditional UNIX crash utility with the
source code level debugging capabilities of gdb.
The current set of commands consist of common kernel core analysis
tools such as kernel stack back traces of all processes, source code
disassembly, formatted kernel structure and variable displays, virtual
memory data, dumps of linked-lists, etc., along with several commands
that delve deeper into specific kernel subsystems. Appropriate gdb
commands may also be entered, which in turn are passed on to the gdb
module for execution.
The crash utility is designed to be independent of Linux version
dependencies. When new kernel source code impacts the correct
functionality of crash and its command set, the utility will be updated
to recognize new kernel code changes, while maintaining backwards
compatibility with earlier releases.
-h opt Crash displays a help message. If the optional opt argument is
a crash command name, the help page for that command is
displayed. If it is the string "input", a page describing the
various crash command line input options is displayed. If it is
the string "output", a page describing command line output
options is displayed.
-v Crash displays the versions of the original gdb and crash
libraries that make up the crash executable.
-s Crash does not display any version, GPL, or crash initialization
data during startup. It proceeds directly to the "crash>"
Crash reads and executes the crash command(s) contained in file
before accepting any user input.
-d num Crash sets its internal debug level. The higher the number, the
more debugging data will be printed while crash runs.
-S Crash uses "/boot/System.map" as the mapfile.
This is a pathname to an uncompressed kernel image (a vmlinux
file) that has been compiled with the "-g" option, or that has
an accessible, associated, debuginfo file. If the dumpfile
argument is entered, then this argument must also be used. If
the namelist argument is not entered and no dumpfile argument is
entered, crash will search in several typical directories for a
kernel namelist that matches the live system.
If the live system kernel, or the kernel from which the dumpfile
was derived, was not compiled with the -g switch, then the
additional mapfile argument is required. It may be either the
associated System.map file, or the non-debug kernel namelist.
However, if the mapfile argument is used, then the namelist
argument must be a kernel namelist of a similar kernel version
that was built with the -g switch.
This is a pathname to a kernel memory core dump file. If the
dumpfile argument is not entered, the session will be invoked on
the live system using /dev/mem, which usually requires root
Each crash command generally falls into one of the following
Displays of kernel text/data, which take full advantage of the
power of gdb to format and display data structures symbolically.
The majority of crash commands come consist of a set of "kernel-
aware" commands, which delve into various kernel subsystems on a
system-wide or per-task basis.
A set of useful helper commands serving various purposes, some
simple, others quite powerful.
Commands that control the crash session itself.
The following alphabetical list consists of a very simple overview of
each crash command. However, since individual commands often have
several options resulting in significantly different output, it is
suggested that the full description of each command be viewed by
entering the command crash -h command, or during a crash session by
simply entering help command.
* "pointer to" is shorthand for either the struct or union
commands. It displays the contents of a kernel structure or
alias creates a single-word alias for a command.
ascii displays an ascii chart or translates a numeric value into its
bt displays a task’s kernel-stack backtrace. If it is given the -a
option, it displays the stack traces of the active tasks on all
CPUs. It is often used with the foreach command to display the
backtraces of all tasks with one command.
btop translates a byte value (physical offset) to it’s page number.
dev displays data concerning the character and block device
assignments, I/O port usage, I/O memory usage, and PCI device
dis disassembles memory, either entire kernel functions, from a
location for a specified number of instructions, or from the
start of a function up to a specified memory location.
eval evalues an expression or numeric type and displays the result in
hexadecimal, decimal, octal and binary.
exit causes crash to exit.
extend dynamically loads or unloads crash extension shared object
files displays information about open files in a context.
repeats a specified command for the specified (or all) tasks in
fuser displays the tasks using the specified file or socket.
gdb passes its argument to the underlying gdb program. It is useful
for executing GDB commands that have the same name as crash
help alone displays the command menu; if followed by a command name,
a full description of a command, its options, and examples are
displayed. Its output is far more complete and useful than this
irq displays data concerning interrupt request numbers and bottom-
half interrupt handling.
kmem displays information about the use of kernel memory.
list displays the contents of a linked list.
log displays the kernel log_buf contents in chronological order.
mach displays data specific to the machine type.
mod displays information about the currently installed kernel
modules, or adds or deletes symbolic or debugging information
about specified kernel modules.
mount displays information about the currently-mounted filesystems.
net display various network related data.
p passes its arguments to the gdb "print" command for evaluation
ps displays process status for specified, or all, processes in the
pte translates the hexadecimal contents of a PTE into its physical
page address and page bit settings.
ptob translates a page frame number to its byte value.
ptov translates a hexadecimal physical address into a kernel virtual
q is an alias for the "exit" command.
rd displays the contents of memory, with the output formatted in
several different manners.
repeat repeats a command indefinitely, optionally delaying a given
number of seconds between each command execution.
runq displays the tasks on the run queue.
search searches a range of user or kernel memory space for given value.
set either sets a new context, or gets the current context for
sig displays signal-handling data of one or more tasks.
struct displays either a structure definition or the contents of a
kernel structure at a specified address.
swap displays information about each configured swap device.
sym translates a symbol to its virtual address, or a static kernel
virtual address to its symbol -- or to a symbol-plus-offset
value, if appropriate.
sys displays system-specific data.
task displays the contents of a task_struct.
timer displays the timer queue entries, both old- and new-style, in
union is similar to the struct command, except that it works on kernel
vm displays basic virtual memory information of a context.
vtop translates a user or kernel virtual address to its physical
waitq walks the wait queue list displaying the tasks which are blocked
on the specified wait queue.
whatis displays the definition of structures, unions, typedefs or
wr modifies the contents of memory. When writing to memory on a
live system, this command should obviously be used with great
Initialization commands. The file can be located in the user’s
HOME directory and/or the current directory. Commands found in
the .crashrc file in the HOME directory are executed before
those in the current directory’s .crashrc file.
EDITOR Command input is read using readline(3). If EDITOR is set to
emacs or vi then suitable keybindings are used. If EDITOR is
not set, then vi is used. This can be overridden by set vi or
set emacs commands located in a .crashrc file, or by entering -e
emacs on the crash command line.
If CRASHPAGER is set, its value is used as the name of the
program to which command output will be sent. If not, then
command output is sent to /usr/bin/less -E -X by default.
If crash does not work, look for a newer version: kernel evolution
frequently makes crash updates necessary.
The command set scroll off will cause output to be sent directly to the
terminal rather than through a paging program. This is useful, for
example, if you are running crash in a window of emacs.
Dave Anderson <firstname.lastname@example.org> wrote crash
Jay Fenlason <email@example.com> wrote this man page.
The help command within crash provides more complete and accurate
documentation than this man page.
http://people.redhat.com/anderson - the home page of the crash utility.