Provided by: tigervnc-standalone-server_1.12.0+dfsg-4ubuntu0.22.04.1_amd64 bug

NAME

       Xtigervnc - the X VNC server

SYNOPSIS

       Xtigervnc [options] :display#

DESCRIPTION

       Xtigervnc  is  the  X VNC (Virtual Network Computing) server.  It is based on a standard X
       server, but it has a "virtual" screen rather than a physical one.  X applications  display
       themselves on it as if it were a normal X display, but they can only be accessed via a VNC
       viewer - see xtigervncviewer(1).

       So Xtigervnc is really two servers in one. To the applications it is an X server,  and  to
       the  remote  VNC  users  it  is  a VNC server. By convention we have arranged that the VNC
       server display number will be the same as the X server display number, which means you can
       use eg. snoopy:2 to refer to display 2 on machine "snoopy" in both the X world and the VNC
       world.

       The best way of starting Xtigervnc is via tigervncsession.  This sets up  the  environment
       appropriately and starts a desktop environment. See the manual page for tigervncsession(8)
       for more information.

OPTIONS

       Xtigervnc takes lots of options - running Xtigervnc -help gives a list.  Many of these are
       standard X server options, which are described in the Xserver(1) manual page.  In addition
       to options which can only be set via the command-line, there are also  "parameters"  which
       can be set both via the command-line and through the tigervncconfig(1) program.

       -geometry widthxheight
              Specify the size of the desktop to be created. Default is 1024x768.

       -depth depth
              Specify  the pixel depth in bits of the desktop to be created. Default is 24, other
              possible values are 16 and 32. Anything else is likely to cause  strange  behaviour
              by applications and may prevent the server from starting at all.

       -pixelformat format
              Specify pixel format for server to use (BGRnnn or RGBnnn). The default for depth 16
              is RGB565 and for depth 24 and 32 is RGB888.

       -interface IP address
              Listen on interface. By default Xtigervnc listens on all available interfaces.

       -inetd This significantly changes Xtigervnc's behaviour so that it can  be  launched  from
              inetd.  See the section below on usage with inetd.

       -help  List all the options and parameters

PARAMETERS

       VNC  parameters  can  be  set  both via the command-line and through the tigervncconfig(1)
       program, and with a VNC-enabled Xorg server via Options entries in the xorg.conf file.

       Parameters can be turned on with -param or off with -param=0.   Parameters  which  take  a
       value  can  be  specified as -param value.  Other valid forms are param=value -param=value
       --param=value.  Parameter names are case-insensitive.

       -desktop desktop-name
              Each desktop has a name which may be  displayed  by  the  viewer.  It  defaults  to
              "<user>@<hostname>".

       -rfbport port
              Specifies the TCP port on which Xtigervnc listens for connections from viewers (the
              protocol used in VNC is called RFB - "remote framebuffer").  The  default  is  5900
              plus the display number. Specify -1 to disable listening on a TCP port.

       -UseIPv4
              Use IPv4 for incoming and outgoing connections. Default is on.

       -UseIPv6
              Use IPv6 for incoming and outgoing connections. Default is on.

       -rfbunixpath path
              Specifies  the  path  of  a  Unix  domain  socket  on  which  Xtigervnc listens for
              connections from viewers.

       -rfbunixmode mode
              Specifies the mode of the Unix domain socket.  The default is 0600.

       -rfbauth passwd-file, -PasswordFile passwd-file
              Password file for VNC authentication.  There is no default, you should specify  the
              password   file   explicitly.    Password   file   should   be   created  with  the
              tigervncpasswd(1) utility.  The file is accessed each time a connection  comes  in,
              so it can be changed on the fly.

       -AcceptCutText
              Accept clipboard updates from clients. Default is on.

       -MaxCutText bytes
              The  maximum  size  of  a  clipboard  update  that  will be accepted from a client.
              Default is 262144.

       -SendCutText
              Send clipboard changes to clients. Default is on.

       -SendPrimary
              Send the primary selection and cut buffer to the server as well  as  the  clipboard
              selection. Default is on.

       -AcceptPointerEvents
              Accept pointer press and release events from clients. Default is on.

       -AcceptKeyEvents
              Accept key press and release events from clients. Default is on.

       -AcceptSetDesktopSize
              Accept requests to resize the size of the desktop. Default is on.

       -DisconnectClients
              Disconnect existing clients if an incoming connection is non-shared. Default is on.
              If DisconnectClients is false, then a new non-shared  connection  will  be  refused
              while there is a client active.  When combined with NeverShared this means only one
              client is allowed at a time.

       -NeverShared
              Never treat incoming connections as  shared,  regardless  of  the  client-specified
              setting. Default is off.

       -AlwaysShared
              Always  treat  incoming  connections  as shared, regardless of the client-specified
              setting. Default is off.

       -Protocol3.3
              Always use protocol version 3.3  for  backwards  compatibility  with  badly-behaved
              clients. Default is off.

       -FrameRate fps
              The maximum number of updates per second sent to each client. If the screen updates
              any faster then those changes will be aggregated and sent in a single update to the
              client.  Note that this only controls the maximum rate and a client may get a lower
              rate when resources are limited. Default is 60.

       -CompareFB mode
              Perform pixel comparison on framebuffer  to  reduce  unnecessary  updates.  Can  be
              either 0 (off), 1 (always) or 2 (auto). Default is 2.

       -ZlibLevel level
              Zlib  compression  level  for  ZRLE  encoding  (it does not affect Tight encoding).
              Acceptable values are between 0 and 9.  Default is to use the standard  compression
              level provided by the zlib(3) compression library.

       -ImprovedHextile
              Use  improved  compression  algorithm  for  Hextile  encoding which achieves better
              compression ratios by the cost of using slightly more CPU time.  Default is on.

       -SecurityTypes sec-types
              Specify which security scheme to use for incoming connections.  Valid values are  a
              comma  separated list of None, VncAuth, Plain, TLSNone, TLSVnc, TLSPlain, X509None,
              X509Vnc and X509Plain. Default is VncAuth,TLSVnc.

       -Password password
              Obfuscated binary encoding of the password which clients must supply to access  the
              server.  Using this parameter is insecure, use PasswordFile parameter instead.

       -PlainUsers user-list
              A  comma  separated  list of user names that are allowed to authenticate via any of
              the "Plain" security types (Plain, TLSPlain, etc.). Specify * to allow any user  to
              authenticate using this security type. Default is to deny all users.

       -pam_service name, -PAMService name
              PAM service name to use when authentication users using any of the "Plain" security
              types. Default is vnc.

       -X509Cert path
              Path to a X509 certificate in PEM format to be used for  all  X509  based  security
              types (X509None, X509Vnc, etc.).

       -X509Key path
              Private  key counter part to the certificate given in X509Cert. Must also be in PEM
              format.

       -GnuTLSPriority priority
              GnuTLS priority string that controls the TLS session’s handshake  algorithms.   See
              the GnuTLS manual for possible values. For GnuTLS < 3.6.3 the default value will be
              NORMAL to use upstream default. For newer versions  of  GnuTLS  system-wide  crypto
              policy will be used.

       -UseBlacklist
              Temporarily  reject connections from a host if it repeatedly fails to authenticate.
              Default is on.

       -BlacklistThreshold count
              The number of unauthenticated connection attempts allowed from any individual  host
              before that host is black-listed.  Default is 5.

       -BlacklistTimeout seconds
              The initial timeout applied when a host is first black-listed.  The host cannot re-
              attempt a connection until the timeout expires.  Default is 10.

       -IdleTimeout seconds
              The number of seconds after which an idle VNC connection will be dropped.   Default
              is 0, which means that idle connections will never be dropped.

       -MaxDisconnectionTime seconds
              Terminate when no client has been connected for N seconds.  Default is 0.

       -MaxConnectionTime seconds
              Terminate when a client has been connected for N seconds.  Default is 0.

       -MaxIdleTime seconds
              Terminate after N seconds of user inactivity.  Default is 0.

       -QueryConnect
              Prompts   the  user  of  the  desktop  to  explicitly  accept  or  reject  incoming
              connections. Default is off.

              The tigervncconfig(1)  program  must  be  running  on  the  desktop  in  order  for
              QueryConnect to be supported.

       -QueryConnectTimeout seconds
              Number  of  seconds  to  show  the  Accept  Connection  dialog before rejecting the
              connection.  Default is 10.

       -localhost
              Only allow connections from the same machine. Useful if you use  SSH  and  want  to
              stop non-SSH connections from any other hosts.

       -Log logname:dest:level
              Configures the debug log settings.  dest can currently be stderr, stdout or syslog,
              and level is between 0 and 100,  100  meaning  most  verbose  output.   logname  is
              usually  *  meaning  all, but you can target a specific source file if you know the
              name of its "LogWriter".  Default is *:stderr:30.

       -RemapKeys mapping
              Sets up a keyboard mapping.  mapping  is  a  comma-separated  string  of  character
              mappings,  each  of the form char->char, or char<>char, where char is a hexadecimal
              keysym. For example, to exchange  the  "  and  @  symbols  you  would  specify  the
              following:

                 RemapKeys=0x22<>0x40

       -AvoidShiftNumLock
              Key  affected by NumLock often require a fake Shift to be inserted in order for the
              correct symbol to be generated. Turning on this  option  avoids  these  extra  fake
              Shift  events  but may result in a slightly different symbol (e.g. a Return instead
              of a keypad Enter).

       -RawKeyboard
              Send keyboard events straight  through  and  avoid  mapping  them  to  the  current
              keyboard layout. This effectively makes the keyboard behave according to the layout
              configured on the server instead of the layout configured on the client. Default is
              off.

       -AllowOverride
              Comma  separated  list  of  parameters  that  can  be modified using VNC extension.
              Parameters can be modified for example using tigervncconfig(1) program from  inside
              a running session.

              Allowing  override  of parameters such as PAMService or PasswordFile can negatively
              impact security if Xtigervnc runs under different user than the programs allowed to
              override the parameters.

              When   NoClipboard   parameter   is  set,  allowing  override  of  SendCutText  and
              AcceptCutText has no effect.

              Default                                                                          is
              desktop,AcceptPointerEvents,SendCutText,AcceptCutText,SendPrimary,SetPrimary.

USAGE WITH INETD

       By  configuring  the  inetd(1)  service appropriately, Xtigervnc can be launched on demand
       when a connection comes in, rather than having to be started  manually.   When  given  the
       -inetd  option,  instead  of  listening  for  TCP  connections on a given port it uses its
       standard input and standard output.  There are two modes  controlled  by  the  wait/nowait
       entry in the inetd.conf file.

       In  the  nowait  mode,  Xtigervnc  uses  its  standard  input  and  output directly as the
       connection to a viewer.  It never  has  a  listening  socket,  so  cannot  accept  further
       connections  from  viewers  (it can however connect out to listening viewers by use of the
       tigervncconfig program).  Further viewer connections to the same TCP port result in  inetd
       spawning  off  a  new  Xtigervnc to deal with each connection.  When the connection to the
       viewer dies, the Xtigervnc and any associated X  clients  die.   This  behaviour  is  most
       useful  when  combined  with  the  XDMCP  options -query and -once.  An typical example in
       inetd.conf might be (all on one line):

       5950   stream    tcp  nowait  nobody   /usr/local/bin/Xtigervnc  Xtigervnc  -inetd  -query
       localhost -once securitytypes=none

       In  this  example  a  viewer  connection  to  :50  will result in a new Xtigervnc for that
       connection which should display the standard XDM login screen on  that  machine.   Because
       the  user  needs  to  login  via XDM, it is usually OK to accept connections without a VNC
       password in this case.

       In the wait mode, when the first connection comes in, inetd gives the listening socket  to
       Xtigervnc.   This  means  that for a given TCP port, there is only ever one Xtigervnc at a
       time.  Further viewer connections to the same port are accepted by the same  Xtigervnc  in
       the  normal way.  Even when the original connection is broken, the Xtigervnc will continue
       to run.  If this is used with the XDMCP  options  -query  and  -once,  the  Xtigervnc  and
       associated  X  clients will die when the user logs out of the X session in the normal way.
       It is important to use a VNC password in this case.  A typical entry in  inetd.conf  might
       be:

       5951    stream    tcp  wait    james      /usr/local/bin/Xtigervnc Xtigervnc -inetd -query
       localhost -once passwordFile=/home/james/.vnc/passwd

       In fact typically, you would have one entry for each user who uses VNC regularly, each  of
       whom  has their own dedicated TCP port which they use.  In this example, when user "james"
       connects to :51, he enters his VNC password, then gets the XDM login screen where he  logs
       in  in  the  normal  way.   However,  unlike  the previous example, if he disconnects, the
       session remains persistent, and when he reconnects he  will  get  the  same  session  back
       again.  When he logs out of the X session, the Xtigervnc will die, but of course a new one
       will be created automatically the next time he connects.

SEE ALSO

       tigervncconfig(1), tigervncpasswd(1), xtigervncviewer(1), tigervncsession(8),  Xserver(1),
       inetd(1)
       https://www.tigervnc.org

AUTHOR

       Tristan Richardson, RealVNC Ltd. and others.

       VNC  was  originally  developed  by the RealVNC team while at Olivetti Research Ltd / AT&T
       Laboratories Cambridge.  TightVNC additions were implemented by Constantin Kaplinsky. Many
       other  people  have since participated in development, testing and support. This manual is
       part of the TigerVNC software suite.