Provided by: coturn_4.5.2-3.1~ubuntu22.04.1_amd64 bug

GENERAL INFORMATION

       The  TURN  Server  project  contains  the  source  code  of  a TURN server and TURN client
       messaging library. Also, some extra programs provided, for testing-only purposes.

       See the INSTALL file for the building instructions.

       After the build, you will have the following binary images:

       1.     turnserver: TURN Server relay.  The  compiled  binary  image  of  the  TURN  Server
              program is located in bin/ sub-directory.

       2.     turnadmin: TURN administration tool. See README.turnadmin and turnadmin man page.

       3.     turnutils_uclient. See README.turnutils and turnutils man page.

       4.     turnutils_peer. See README.turnutils and turnutils man page.

       5.     turnutils_stunclient. See README.turnutils and turnutils man page.

       6.     turnutils_rfc5769check. See README.turnutils and turnutils man page.

       In the "examples/scripts" sub-directory, you will find the examples of command lines to be
       used to run the programs. The scripts are meant to be run  from  examples/  sub-directory,
       for example:

       $ cd examples $ ./scripts/secure_relay.sh

SYSTEMD

       If  the  systemd  development  library is available, then it will notify systemd about the
       server status.

RUNNING THE TURN SERVER

       Options note: turnserver has long and short option names, for most options.  Some  options
       have  only  long form, some options have only short form. Their syntax somewhat different,
       if an argument is required:

       The short form must be used as this (for example):

         $ turnserver -L 12.34.56.78

       The long form equivalent must use the "=" character:

         $ turnserver --listening-ip=12.34.56.78

       If this is a flag option (no argument  required)  then  their  usage  are  the  same,  for
       example:

        $ turnserver -a

       is equivalent to:

        $ turnserver --lt-cred-mech

=====================================

   NAME
        turnserver - a TURN relay server implementation.

   SYNOPSIS
       $ turnserver [-n | -c <config-file> ] [flags] [ --userdb=<userdb-file> | --psql-userdb=<db-conn-string> | --mysql-userdb=<db-conn-string>  | --mongo-userdb=<db-conn-string>  | --redis-userdb=<db-conn-string> ] [-z | --no-auth | -a | --lt-cred-mech ] [options]
       $ turnserver -h

   DESCRIPTION
       Config file settings:

       -n     Do not use configuration file, use only command line parameters.

       -c     Configuration file name (default - turnserver.conf).  The format of config file can
              be seen in the supplied examples/etc/turnserver.conf example file.  Long  names  of
              the  options  are  used  as  the  configuration  items names in the file. If not an
              absolute path is supplied, then the file is searched in the following directories:

              •  current directory

              •  current directory etc/ sub-directory

              •  upper directory level etc/

              •  /etc//usr/local/etc/

              •  installation directory /etc

       User database settings:

       -b, --db, --userdb
              SQLite    user    database    file    name    (default    -    /var/db/turndb    or
              /usr/local/var/db/turndb or /var/lib/turn/turndb).

       -e, --psql-userdb
              User  database  connection  string  for  PostgreSQL.  This database can be used for
              long-term credentials mechanism, and it can store the secret value for secret-based
              timed authentication in TURN REST API.  The connection string format is like that:

              "host=<host>     dbname=<dbname>     user=<db-user>     password=<db-user-password>
              connect_timeout=<seconds>" (for 8.x or newer Postgres).

              Or:

              "postgresql://username:password@hostname:port/databasename"  (for  9.x   or   newer
              Postgres).

              See the INSTALL file for more explanations and examples.

              Also, see http://www.PostgreSQL.org for full PostgreSQL documentation.

       -M, --mysql-userdb
              User  database  connection  string for MySQL or MariaDB.  This database can be used
              for long-term credentials  mechanism,  and  it  can  store  the  secret  value  for
              secret-based  timed  authentication in TURN REST API.  The connection string format
              is like that:

              "host=<host>     dbname=<dbname>     user=<db-user>     password=<db-user-password>
              connect_timeout=<seconds> read_timeout=<seconds>"

              See the INSTALL file for more explanations and examples.

              Also, see http://www.mysql.org or http://mariadb.org for full MySQL documentation.

              Optional  connection  string  parameters  for  the secure communications (SSL): ca,
              capath,              cert,              key,              cipher               (see
              http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html  for  the  command  options
              description).

       --secret-key-file
              This is the file path which contain secret key of aes encryption while using  MySQL
              password  encryption.   If  you  want  to  use  in  the MySQL connection string the
              password in encrypted format, then set in this option the file path of  the  secret
              key.  The  key which is used to encrypt MySQL password.  Warning: If this option is
              set, then MySQL password must be set in "mysql-userdb" option in encrypted  format!
              If you want to use cleartext password then do not set this option!

       -J, --mongo-userdb
              User  database  connection  string  for  MongoDB.   This  database  can be used for
              long-term credentials mechanism, and it can store the secret value for secret-based
              timed authentication in TURN REST API.  The connection string format is like that:

              "mongodb://username:password@host:port/database?options"

              See the INSTALL file for more explanations and examples.

              Also, see http://docs.mongodb.org/manual/ for full MongoDB documentation.

       -N, --redis-userdb
              User database connection string for Redis.  This database can be used for long-term
              credentials mechanism, and it can store the secret  value  for  secret-based  timed
              authentication in TURN REST API.  The connection string format is like that:

              "ip=<ip-addr> dbname=<db-number> password=<db-password> connect_timeout=<seconds>"

              See the INSTALL file for more explanations and examples.

              Also, see http://redis.io for full Redis documentation.

       Flags:

       -v, --verbose
              Moderate verbose mode.

       -V, --Verbose
              Extra verbose mode, very annoying and not recommended.

       -o, --daemon
              Run server as daemon.

       --no-software-attribute Production mode: hide the software version.

       -f, --fingerprint
              Use  fingerprints  in  the  TURN  messages.  If  an  incoming  request  contains  a
              fingerprint, then TURN server will always add fingerprints to the messages in  this
              session, regardless of the per-server setting.

       -a, --lt-cred-mech
              Use long-term credentials mechanism (this one you need for WebRTC usage).

       -z, --no-auth
              Do  not  use any credentials mechanism, allow anonymous access.  Opposite to -a and
              -A options. This is default option when no authentication-related options are  set.
              By default, no credential mechanism is used - any user is allowed.

       --use-auth-secret
              TURN  REST  API flag.  Flag that sets a special WebRTC authorization option that is
              based upon authentication secret. The feature purpose is to  support  "TURN  Server
              REST  API"  as  described  in  the  TURN  REST API section below.  This option uses
              timestamp as part of combined username:  usercombo  ->  "timestamp:username",  turn
              user  ->  usercombo,  turn  password -> base64(hmac(input_buffer = usercombo, key =
              shared-secret)).  This allows TURN credentials to be accounted for a specific  user
              id.  If you don't have a suitable id, the timestamp alone can be used.  This option
              is just turns on secret-based authentication.  The actual value of  the  secret  is
              defined  either  by  option  static-auth-secret, or can be found in the turn_secret
              table in the database.

       --oauth
              Support oAuth authentication, as in the third-party STUN/TURN RFC 7635.

       --dh566
              Use 566 bits predefined DH TLS key. Default size of the key is 2066.

       --dh1066
              Use 1066 bits predefined DH TLS key. Default size of the key is 2066.

       --no-tlsv1
              Do not allow TLSv1/DTLSv1 protocol.

       --no-tlsv1_1
              Do not allow TLSv1.1 protocol.

       --no-tlsv1_2
              Do not allow TLSv1.2/DTLSv1.2 protocol.

       --no-udp
              Do not start UDP client listeners.

       --no-tcp
              Do not start TCP client listeners.

       --no-tls
              Do not start TLS client listeners.

       --no-dtls
              Do not start DTLS client listeners.

       --no-udp-relay
              Do not allow UDP relay endpoints defined in RFC 5766, use only TCP relay  endpoints
              as defined in RFC 6062.

       --no-tcp-relay
              Do  not allow TCP relay endpoints defined in RFC 6062, use only UDP relay endpoints
              as defined in RFC 5766.

       --no-stdout-log
              Flag to prevent stdout log messages.  By default, all log  messages  are  going  to
              both  stdout  and  to  the configured log file. With this option everything will be
              going to the log file only (unless the log file itself is stdout).

       --syslog
              With this flag, all log will be redirected to the system log (syslog).

       --simple-log
              This flag means that no log file rollover will be used, and the log file name  will
              be constructed as-is, without PID and date appendage.  This option can be used, for
              example, together with the logrotate tool.

       --new-log-timestamp
              Enable full ISO-8601 timestamp in all logs.

       --new-log-timestamp-format
              <format>        Set timestamp format (in strftime(1) format)

       --log-binding
              Log STUN binding request. It is now disabled by default to avoid DoS attacks.

       --secure-stun
              Require authentication of the STUN Binding request.  By default,  the  clients  are
              allowed anonymous access to the STUN Binding functionality.

       -S, --stun-only
              Run  as  STUN  server  only, all TURN requests will be ignored.  Option to suppress
              TURN functionality, only STUN requests will be processed.

       --no-stun
              Run as TURN server only, all STUN requests will be  ignored.   Option  to  suppress
              STUN functionality, only TURN requests will be processed.

       --allow-loopback-peers
              Allow  peers  on  the  loopback  addresses  (127.x.x.x and ::1).  Allow it only for
              testing in a development environment!  In production it adds  a  possible  security
              vulnerability,  and so due to security reasons, it is not allowed using it together
              with empty cli-password.

       --no-multicast-peers
              Disallow peers on well-known broadcast addresses (224.0.0.0 and above, and FFXX:*).

       --mobility
              Mobility with ICE (MICE) specs support.

       --no-cli
              Turn OFF the CLI support. By default it is always ON.  See  also  options  --cli-ip
              and --cli-port.

       --server-relay
              Server  relay. NON-STANDARD AND DANGEROUS OPTION.  Only for those applications when
              we want to run server applications on the relay endpoints.  This option  eliminates
              the  IP  permissions  check  on  the  packets incoming to the relay endpoints.  See
              http://tools.ietf.org/search/rfc5766#section-17.2.3 .

       --udp-self-balance
              (recommended for  older  Linuxes  only)  Automatically  balance  UDP  traffic  over
              auxiliary servers (if configured). The load balancing is using the ALTERNATE-SERVER
              mechanism. The TURN client must support  300  ALTERNATE-SERVER  response  for  this
              functionality.

       --check-origin-consistency
              The  flag  that sets the origin consistency check: across the session, all requests
              must have the same main ORIGIN attribute value (if the ORIGIN was initially used by
              the session).

              --prometheus
                     Enable  prometheus  metrics. By default it is disabled. Would listen on port
                     9641 unther the path /metrics also the path / on this port can be used as  a
                     health check

       -h     Help.

       Options with values:

       --stale-nonce[=<value>]
              Use  extra  security  with nonce value having limited lifetime, in seconds (default
              600 secs).  Set it to 0 for unlimited nonce lifetime.

       --max-allocate-lifetime
              Set the maximum value for the allocation lifetime.  Default to 3600 secs.

       --channel-lifetime
              Set the lifetime for channel binding, default to 600 secs.  This value MUST not  be
              changed for production purposes.

       --permission-lifetime
              Set  the value for the lifetime of the permission.  Default to 300 secs.  This MUST
              not be changed for production purposes.

       -d, --listening-device
              Listener interface device.  (NOT RECOMMENDED. Optional functionality, Linux  only).
              The  turnserver process must have root privileges to bind the listening endpoint to
              a device. If turnserver must run as a process without root privileges, then just do
              not use this setting.

       -L, --listening-ip
              Listener  IP  address  of  relay  server.  Multiple listeners can be specified, for
              example: -L ip1 -L ip2 -L ip3 If no IP(s) specified, then all IPv4 and IPv6  system
              IPs  will  be used for listening.  The same ip(s) can be used as both listening and
              relay ip(s).

       -p, --listening-port
              TURN listener port for UDP and TCP listeners (Default: 3478).  Note: actually,  TLS
              &  DTLS  sessions can connect to the "plain" TCP & UDP port(s), too - if allowed by
              configuration.

       --tls-listening-port
              TURN listener port for TLS and DTLS listeners  (Default:  5349).   Note:  actually,
              "plain"  TCP & UDP sessions can connect to the TLS & DTLS port(s), too - if allowed
              by configuration. The TURN server "automatically" recognizes the type  of  traffic.
              Actually,  two  listening  endpoints  (the  "plain"  one  and  the  "tls"  one) are
              equivalent in terms of functionality; but we keep both endpoints to satisfy the RFC
              5766 specs.  For secure TCP connections, we currently support SSL version 3 and TLS
              versions 1.0, 1.1, 1.2.  For secure UDP connections, we support DTLS version 1.

       --alt-listening-port
              Alternative listening port for UDP and TCP listeners; default (or zero) value means
              "listening  port  plus  one".  This is needed for STUN CHANGE_REQUEST - in RFC 5780
              sense or in old RFC 3489 sense - for  NAT  behavior  discovery).  The  TURN  Server
              supports  CHANGE_REQUEST  only  if  it  is  started with more than one listening IP
              address of the same family (IPv4 or IPv6). The CHANGE_REQUEST is only supported  by
              UDP protocol, other protocols are listening on that endpoint only for "symmetry".

       --alt-tls-listening-port
              Alternative  listening  port  for  TLS and DTLS protocols.  Default (or zero) value
              means "TLS listening port plus one".

       --tcp-proxy-port
              Support connections from TCP loadbalancer on this port. The loadbalancer should use
              the                    binary                    proxy                    protocol.
              (https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt)

       --aux-server
              Auxiliary STUN/TURN server listening endpoint.  Aux servers have almost  full  TURN
              and STUN functionality.  The (minor) limitations are:

              1)  Auxiliary  servers  do  not have alternative ports and they do not support STUN
                  RFC 5780 functionality (CHANGE REQUEST).

              2)  Auxiliary servers also are never returning ALTERNATIVE-SERVER reply.

       Valid formats are 1.2.3.4:5555 for IPv4  and  [1:2::3:4]:5555  for  IPv6.   There  may  be
       multiple aux-server options, each will be used for listening to client requests.

       -i, --relay-device
              Relay interface device for relay sockets (NOT RECOMMENDED. Optional, Linux only).

       -E, --relay-ip
              Relay  address  (the local IP address that will be used to relay the packets to the
              peer). Multiple relay addresses may be used: -E ip1 -E ip2 -E ip3  The  same  IP(s)
              can  be used as both listening IP(s) and relay IP(s).  If no relay IP(s) specified,
              then the turnserver will apply the default policy:  it  will  decide  itself  which
              relay  addresses  to  be  used,  and  it  will always be using the client socket IP
              address as the relay IP address of the TURN session (if the requested relay address
              family is the same as the family of the client socket).

       -X, --external-ip
              TURN  Server  public/private address mapping, if the server is behind NAT.  In that
              situation, if a -X is used in form "-X <ip>" then that ip will be reported as relay
              IP  address  of all allocations. This scenario works only in a simple case when one
              single relay address is be used, and no CHANGE_REQUEST functionality  is  required.
              That  single  relay  address  must  be  mapped  by  NAT  to the 'external' IP.  The
              "external-ip" value, if not empty, is returned in XOR-RELAYED-ADDRESS  field.   For
              that  'external'  IP,  NAT  must forward ports directly (relayed port 12345 must be
              always mapped to the same 'external' port 12345).  In more complex case  when  more
              than one IP address is involved, that option must be used several times, each entry
              must  have  form  "-X  <public-ip/private-ip>",  to  map  all  involved  addresses.
              CHANGE_REQUEST  (RFC5780  or  RFC3489)  NAT  discovery STUN functionality will work
              correctly, if the addresses are mapped properly, even when the TURN  server  itself
              is behind A NAT.  By default, this value is empty, and no address mapping is used.

       -m, --relay-threads
              Number  of  the relay threads to handle the established connections (in addition to
              authentication thread and the listener  thread).   If  explicitly  set  to  0  then
              application  runs  relay  process  in  a single thread, in the same thread with the
              listener process (the authentication thread will still be a  separate  thread).  If
              not  set,  then a default optimal algorithm will be employed (OS-dependent). In the
              older Linux systems (before Linux kernel 3.9), the number of UDP threads is  always
              one threads per network listening endpoint - unless "-m 0" or "-m 1" is set.

       --min-port
              Lower bound of the UDP port range for relay endpoints allocation.  Default value is
              49152, according to RFC 5766.

       --max-port
              Upper bound of the UDP port range for relay endpoints allocation.  Default value is
              65535, according to RFC 5766.

       -u, --user
              Long-term security mechanism credentials user account, in the column-separated form
              username:key.  Multiple user accounts may be used in the command line.  The key  is
              either  the  user  password,  or  the key is generated by turnadmin command. In the
              second case, the key must be prepended with 0x symbols.  The key is calculated over
              the user name, the user realm, and the user password.  This setting may not be used
              with TURN REST API.

       -r, --realm
              The default  realm  to  be  used  for  the  users  when  no  explicit  origin/realm
              relationship  was  found  in  the  database, or if the TURN server is not using any
              database (just the commands-line settings and the userdb file). Must be  used  with
              long-term credentials mechanism or with TURN REST API.

       -C, --rest-api-separator
              This  is  the timestamp/username separator symbol (character) in TURN REST API. The
              default value is :.

       -q, --user-quota
              Per-user allocations quota: how many concurrent allocations a user can create. This
              option can also be set through the database, for a particular realm.

       -Q, --total-quota
              Total  allocations  quota: global limit on concurrent allocations.  This option can
              also be set through the database, for a particular realm.

       -s, --max-bps
              Max bytes-per-second bandwidth a TURN session  is  allowed  to  handle  (input  and
              output  network  streams are treated separately). Anything above that limit will be
              dropped or temporary suppressed (within the available buffer limits).  This  option
              can also be set through the database, for a particular realm.

       -B, --bps-capacity
              Maximum  server  capacity.   Total  bytes-per-second  bandwidth  the TURN server is
              allowed to allocate for the sessions, combined (input and  output  network  streams
              are treated separately).

       --static-auth-secret
              Static  authentication secret value (a string) for TURN REST API only.  If not set,
              then the turn server will try to use the dynamic value in turn_secret table in user
              database  (if  present).  The  database-stored value can be changed on-the-fly by a
              separate program, so this is why  that  other  mode  is  dynamic.  Multiple  shared
              secrets can be used (both in the database and in the "static" fashion).

              --no-auth-pings
                     Disable periodic health checks to 'dynamic' auth secret tables.

              --no-dynamic-ip-list
                     Do not use dynamic allowed/denied peer ip list.

              --no-dynamic-realms
                     Do not use dynamic realm assignment and options.

       --server-name
              Server  name  used for the oAuth authentication purposes.  The default value is the
              realm name.

       --cert Certificate  file,  PEM  format.  Same  file  search  rules  applied  as  for   the
              configuration file. If both --no-tls and --no-dtls options are specified, then this
              parameter is not needed.  Default value is turn_server_cert.pem.

       --pkey Private  key  file,  PEM  format.  Same  file  search  rules  applied  as  for  the
              configuration file. If both --no-tls and --no-dtls options are specified, then this
              parameter is not needed.  Default value is turn_server_pkey.pem.

       --pkey-pwd
              If the private key file is encrypted, then this password to be used.

       --cipher-list
              Allowed OpenSSL cipher list for TLS/DTLS connections.  Default value is "DEFAULT".

       --CA-file
              CA  file  in  OpenSSL  format.   Forces  TURN  server  to  verify  the  client  SSL
              certificates.   By  default,  no  CA  is  set  and  no  client certificate check is
              performed.

       --ec-curve-name
              Curve name for EC ciphers, if supported by OpenSSL  library  (TLS  and  DTLS).  The
              default  value is prime256v1, if pre-OpenSSL 1.0.2 is used. With OpenSSL 1.0.2+, an
              optimal curve will be automatically calculated, if not defined by this option.

       --dh-file
              Use custom DH TLS key, stored in  PEM  format  in  the  file.   Flags  --dh566  and
              --dh1066 are ignored when the DH key is taken from a file.

       -l, --log-file
              Option to set the full path name of the log file.  By default, the turnserver tries
              to open a log file in /var/log/turnserver, /var/log, /var/tmp, /tmp and . (current)
              directories (which file open operation succeeds first that file will be used). With
              this option you can set the definite log file name.  The special names are "stdout"
              and  "-"  -  they  will  force  everything  to the stdout. Also, "syslog" name will
              redirect everything into the system log (syslog), as if the option  "--syslog"  was
              set.   In  the  runtime,  the  logfile  can  be reset with the SIGHUP signal to the
              turnserver process.

       --alternate-server
              Option to set the "redirection" mode. The value of this option will be the  address
              of  the alternate server for UDP & TCP service in form of <ip>[:<port>]. The server
              will send this value in the attribute ALTERNATE-SERVER, with error 300, on ALLOCATE
              request,  to  the  client.   Client  will receive only values with the same address
              family as the client network endpoint address family.  See RFC 5389  and  RFC  5766
              for  ALTERNATE-SERVER  functionality description.  The client must use the obtained
              value for subsequent TURN communications.   If  more  than  one  --alternate-server
              options  are  provided,  then the functionality can be more accurately described as
              "load-balancing" than a mere "redirection".  If the port number  is  omitted,  then
              the  default  port  number  3478 for the UDP/TCP protocols will be used.  Colon (:)
              characters in IPv6 addresses may  conflict  with  the  syntax  of  the  option.  To
              alleviate  this conflict, literal IPv6 addresses are enclosed in square brackets in
              such resource identifiers, for example: [2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478
              .   Multiple  alternate  servers  can  be set. They will be used in the round-robin
              manner. All servers in the pool are considered of equal weight and the load will be
              distributed  equally. For example, if we have 4 alternate servers, then each server
              will receive 25% of ALLOCATE requests. An alternate TURN server address can be used
              more  than  one  time  with  the  alternate-server  option,  so  this  can  emulate
              "weighting" of the servers.

       --tls-alternate-server
              Option to set alternative server for TLS & DTLS services in form of <ip>:<port>. If
              the  port  number  is  omitted,  then the default port number 5349 for the TLS/DTLS
              protocols will be used. See the previous option for the functionality description.

       -O, --redis-statsdb
              Redis status and statistics database connection string, if used (default  -  empty,
              no Redis stats DB used). This database keeps allocations status information, and it
              can be also used  for  publishing  and  delivering  traffic  and  allocation  event
              notifications.   This  database  option can be used independently of --redis-userdb
              option, and actually Redis can be used for status/statistics and SQLite or MySQL or
              MongoDB or PostgreSQL can be used for the user database.  The connection string has
              the same parameters as redis-userdb connection string.

       --max-allocate-timeout
              Max time, in seconds, allowed for full allocation  establishment.   Default  is  60
              seconds.

       --denied-peer-ip=<IPaddr[-IPaddr]>

       --allowed-peer-ip=<IPaddr[-IPaddr]>  Options  to  ban  or  allow  specific ip addresses or
       ranges of ip addresses. If an ip address is specified as both allowed and denied, then the
       ip  address is considered to be allowed. This is useful when you wish to ban a range of ip
       addresses, except for a few specific ips within that range.  This can be used when you  do
       not  want  users  of  the  turn server to be able to access machines reachable by the turn
       server, but would otherwise be unreachable from the internet (e.g. when the turn server is
       sitting  behind  a  NAT).  The  'white" and "black" peer IP ranges can also be dynamically
       changed in the database.  The allowed/denied addresses (white/black lists) rules are  very
       simple:

              1)  If there is no rule for an address, then it is allowed;

              2)  If  there  is  an  "allowed" rule that fits the address then it is allowed - no
                  matter what;

              3)  If there is no "allowed" rule that fits the address, and if there is a "denied"
                  rule that fits the address, then it is denied.

       --pidfile
              File  name to store the pid of the process.  Default is /var/run/turnserver.pid (if
              superuser account is used) or /var/tmp/turnserver.pid .

       --acme-redirect
              <URL>  Redirect ACME/RFC8555 (like Let's Encrypt challenge)  requests,  i.e.   HTTP
              GET  requests  matching  '^/.well-known/acme-challenge/(.*)'  to <URL>$1 with $1 ==
              (.*). No validation of <URL> will be done, so make  sure  you  do  not  forget  the
              trailing  slash.  If  <URL>  is  an  empty  string  (the default value), no special
              handling of such requests will be done.

       --proc-user
              User name to run the process. After the initialization, the turnserver process will
              make an attempt to change the current user ID to that user.

       --proc-group
              Group  name  to  run  the process. After the initialization, the turnserver process
              will make an attempt to change the current group ID to that group.

       -K, --keep-address-family
              TURN server allocates address family according TURN Client <=> Server communication
              address family.  !! It breaks RFC6156 section-4.2 (violates default IPv4) !!

       --cli-ip
              Local  system  IP  address to be used for CLI management interface.  The turnserver
              process can be accessed for management with telnet, at this IP address and  on  the
              CLI  port (see the next parameter).  Default value is 127.0.0.1. You can use telnet
              or putty (in telnet mode) to access the CLI management interface.

       --cli-port
              CLI management interface listening port. Default is 5766.

       --cli-password
              CLI access password. Default is empty (no password).  For the security reasons,  it
              is recommended to use the encrypted form of the password (see the -P command in the
              turnadmin utility). The dollar signs in the encrypted form must be escaped.

       --cli-max-output-sessions
              Maximum number of output sessions in ps CLI command.  This  value  can  be  changed
              on-the-fly in CLI. The default value is 256.

       --web-admin
              Enable Turn Web-admin support. By default it is disabled.

       --web-admin-ip=<IP>
              Local  system IP address to be used for Web-admin server endpoint. Default value is
              127.0.0.1.

       --web-admin-port=<port>
              Web-admin server port. Default is 8080.

       --web-admin-listen-on-workers
              Enable for web-admin server to listens on STUN/TURN workers  STUN/TURN  ports.   By
              default  it is disabled for security resons!  (This behavior used to be the default
              behavior, and was enabled by default.)

       --ne=[1|2|3]
              Set network engine type for the process (for internal purposes).

==================================

LOAD BALANCE AND PERFORMANCE TUNING

       This topic is covered in the wiki page:

       https://github.com/coturn/coturn/wiki/turn_performance_and_load_balance

===================================

WEBRTC USAGE

       This is a set of notes for the WebRTC users:

       1)  WebRTC uses long-term authentication mechanism, so you  have  to  use  -a  option  (or
           --lt-cred-mech).  WebRTC relaying will not work with anonymous access. With -a option,
           do not forget to set the default realm (-r option). You will also have to set  up  the
           user accounts, for that you have a number of options:

               a) command-line options (-u).

               b) a database table (SQLite or PostgreSQL or MySQL or MongoDB). You will have to
               set keys with turnadmin utility (see docs and wiki for turnadmin).
               You cannot use open passwords in the database.

               c) Redis key/value pair(s), if Redis is used. You key use either keys or
               open passwords with Redis; see turndb/testredisdbsetup.sh file.

               d) You also can use the TURN REST API. You will need shared secret(s) set
               either  through the command line option, or through the config file, or through
               the database table or Redis key/value pairs.

       2)  Usually WebRTC uses fingerprinting (-f).

       3)  -v option may be nice to see the connected clients.

       4)  -X is needed if you are running your TURN server behind a NAT.

       5)  --min-port and --max-port may be needed if you want to limit the relay endpoints ports
           number range.

===================================

TURN REST API

       In WebRTC, the browser obtains the TURN connection information from the web  server.  This
       information  is a secure information - because it contains the necessary TURN credentials.
       As these credentials are transmitted  over  the  public  networks,  we  have  a  potential
       security breach.

       If  we  have  to  transmit  a  valuable  information  over  the  public network, then this
       information has to have a limited lifetime. Then the  guy  who  obtains  this  information
       without permission will be able to perform only limited damage.

       This  is  how  the  idea of TURN REST API - time-limited TURN credentials - appeared. This
       security mechanism is based upon the long-term credentials mechanism. The main idea of the
       REST  API  is  that  the  web  server  provides  the  credentials to the client, but those
       credentials can be used only limited time by an application that  has  to  create  a  TURN
       server connection.

       The "classic" long-term credentials mechanism (LTCM) is described here:

       http://tools.ietf.org/html/rfc5389#section-10.2

       http://tools.ietf.org/html/rfc5389#section-15.4

       For  authentication,  each  user  must  know  two  things:  the username and the password.
       Optionally, the user must supply the ORIGIN value, so that the server can figure  out  the
       realm  to  be  used  for the user. The nonce and the realm values are supplied by the TURN
       server. But LTCM is not saying anything about the nature and about the persistence of  the
       username and of the password; and this is used by the REST API.

       In  the  TURN  REST  API,  there is no persistent passwords for users. A user has just the
       username. The password is always  temporary,  and  it  is  generated  by  the  web  server
       on-demand,  when  the  user  accesses the WebRTC page. And, actually, a temporary one-time
       session only, username is provided to the user, too.

       The temporary user is generated as:

       temporary-username="timestamp" + ":" + "username"

       where username is the persistent user name, and the timestamp format is just seconds since
       1970 - the same value as time(NULL) function returns.

       The temporary password is obtained as HMAC-SHA1 function over the temporary username, with
       shared secret as the HMAC key, and then the result is encoded:

       temporary-password = base64_encode(hmac-sha1(shared-secret, temporary-username))

       Both the TURN server and the web server know the same shared secret. How the shared secret
       is distributed among the involved entities is left to the WebRTC deployment details - this
       is beyond the scope of the TURN REST API.

       So, a timestamp is used for the temporary password calculation, and this timestamp can  be
       retrieved  from  the temporary username. This information is valuable, but only temporary,
       while the timestamp is not  expired.  Without  knowledge  of  the  shared  secret,  a  new
       temporary password cannot be generated.

       This  is  all  formally  described  in  Justin's Uberti TURN REST API document that can be
       obtained  following  the  link  "TURN  REST  API"  in  the  TURN  Server  project's   page
       https://github.com/coturn/coturn/.

       Once the temporary username and password are obtained by the client (browser) application,
       then the rest is just 'classic" long-term credentials mechanism.  For developers,  we  are
       going to describe it step-by-step below:

              •  a  new  TURN  client  sends a request command to the TURN server. Optionally, it
                 adds the ORIGIN field to it.

              •  TURN server sees that this is a new client and the message is not authenticated.

              •  the TURN server generates a random nonce string, and return the error 401 to the
                 client,  with  nonce  and realm included. If the ORIGIN field was present in the
                 client request, it may affect the realm value that the server  chooses  for  the
                 client.

              •  the  client  sees  the  401  error  and  it  extracts  two values from the error
                 response: the nonce and the realm.

              •  the client uses username, realm and password to produce a key:

                       key = MD5(username ":" realm ":" SASLprep(password))
              (SASLprep is described here: http://tools.ietf.org/html/rfc4013)

              •  the client forms a new request, adds username, realm and nonce to  the  request.
                 Then, the client calculates and adds the integrity field to the request. This is
                 the trickiest part of the process, and it is described in  the  end  of  section
                 15.4: http://tools.ietf.org/html/rfc5389#section-15.4

              •  the  client,  optionally,  adds the fingerprint field. This may be also a tricky
                 procedure, described in section 15.5 of the same document.  WebRTC usually  uses
                 fingerprinted TURN messages.

              •  the TURN server receives the request, reads the username.

              •  then  the TURN server checks that the nonce and the realm in the request are the
                 valid ones.

              •  then the TURN server calculates the key.

              •  then the TURN server calculates the integrity field.

              •  then the TURN server compares the calculated integrity field with  the  received
                 one - they must be the same. If the integrity fields differ, then the request is
                 rejected.

       In subsequent communications, the client may go with exactly the same  sequence,  but  for
       optimization  usually  the  client,  having  already  information  about  realm and nonce,
       pre-calculates the integrity string for each request,  so  that  the  401  error  response
       becomes  unnecessary.   The TURN server may use "--stale-nonce" option for extra security:
       in some time, the nonce expires and the client will obtain 438 error response with the new
       nonce, and the client will have to start using the new nonce.

       In  subsequent  communications,  the  server  and  the  client will always assume the same
       password - the original password becomes the session parameter and is never  expiring.  So
       the  password is not changing while the session is valid and unexpired. So, if the session
       is properly maintained, it may go forever, even if the  user  password  has  been  already
       changed  (in the database). The session simply is using the old password. Once the session
       got disconnected, the client will have to use the  new  password  to  re-connect  (if  the
       password has been changed).

       An  example  when  a  new shared secret is generated every hour by the TURN server box and
       then   supplied   to   the   web   server,   remotely,   is   provided   in   the   script
       examples/scripts/restapi/shared_secret_maintainer.pl .

       A  very  important thing is that the nonce must be totally random and it must be different
       for different clients and different sessions.

===================================

DATABASES

       For the user database, the turnserver has the following options:

       1)  Users can be set in the command line, with multiple -u or --user options.   Obviously,
           only  a  few  users  can  be  set  that  way,  and their credentials are fixed for the
           turnserver process lifetime.

       2)  Users can be stored in SQLite DB. The default SQLite database file  is  /var/db/turndb
           or /usr/local/var/db/turndb or /var/lib/turn/turndb.

       3)  Users  can  be  stored  in  PostgreSQL  database,  if the turnserver was compiled with
           PostgreSQL support. Each  time  turnserver  checks  user  credentials,  it  reads  the
           database  (asynchronously,  of  course,  so  that  the  current flow of packets is not
           delayed in any way), so any change in the database content is immediately  visible  by
           the  turnserver.  This is the way if you need the best scalability. The schema for the
           database can be found in schema.sql file.  For long-term credentials, you have to  set
           the  "keys"  for the users; the "keys" are generated by the turnadmin utility. For the
           key generation, you need username, password and the realm.  All users in the  database
           must  use  the  same realm value; if down the road you will decide to change the realm
           name, then you will have to re-generate all user keys (that can be  done  in  a  batch
           script). See the file turndb/testsqldbsetup.sql as an example.

       4)  The  same  is  true  for MySQL database. The same schema file is applicable.  The same
           considerations are applicable.

       5)  The same is true for the Redis database, but  the  Redis  database  has  aa  different
           schema  -  it can be found (in the form of explanation) in schema.userdb.redis.  Also,
           in Redis you can store both "keys" and open passwords (for long  term  credentials)  -
           the  "open  password"  option  is  less  secure  but  more convenient for low-security
           environments.  See the file turndb/testredisdbsetup.sh as an example.

       6)  If a database is used, then users can be divided  into  multiple  independent  realms.
           Each  realm  can  be  administered  separately, and each realm can have its own set of
           users and its own performance options (max-bps, user-quota, total-quota).

       7)  If you use MongoDB, the database will be setup for you automatically.

       8)  Of course, the turnserver can be used in non-secure mode, when users  are  allowed  to
           establish sessions anonymously. But in most cases (like WebRTC) that will not work.

       For the status and statistics database, there are two choices:

       1)  The  simplest  choice  is  not  to use it. Do not set --redis-statsdb option, and this
           functionality will be simply ignored.

       2)  If you choose to use it, then set the --redis-statsdb option. This  may  be  the  same
           database  as in --redis-userdb option, or it may be a different database. You may want
           to use different database for security or  convenience  reasons.  Also,  you  can  use
           different  database  management  systems  for the user database and for the ststus and
           statistics database. For example, you can use MySQL as the user database, and you  can
           use redis for the statistics. Or you can use Redis for both.

       So,  we  have  6  choices  for  the  user  management,  and  2  choices for the statistics
       management. These two are totally independent. So, you have overall 6*2=12 ways to  handle
       persistent information, choose any for your convenience.

       You  do not have to handle the database information "manually" - the turnadmin program can
       handle everything for you. For PostgreSQL and MySQL you will just have to create an  empty
       database  with  schema.sql  SQL script. With Redis, you do not have to do even that - just
       run turnadmin and it will set the users for you (see the turnadmin manuals).  If  you  are
       using  SQLite,  then  the  turnserver or turnadmin will initialize the empty database, for
       you, when started. The TURN server  installation  process  creates  an  empty  initialized
       SQLite  database  in  the  default location (/var/db/turndb or /usr/local/var/db/turndb or
       /var/lib/turn/turndb, depending on the system).

=================================

ALPN

       The server supports ALPNs "stun.turn" and "stun.nat-discovery", when compiled with OpenSSL
       1.0.2 or newer. If the server receives a TLS/DTLS ClientHello message that contains one or
       both of those ALPNs, then the server chooses the first stun.* label and sends it back  (in
       the ServerHello) in the ALPN extension field. If no stun.* label is found, then the server
       does not include the ALPN information into the ServerHello.

=================================

LIBRARIES

       In the lib/ sub-directory the build process will create TURN client messaging library.  In
       the  include/  sub-directory, the necessary include files will be placed.  The C++ wrapper
       for the messaging functionality is located in TurnMsgLib.h header.  An example of C++ code
       can be found in stunclient.c file.

=================================

DOCS

       After installation, run the command:

       $ man turnserver

       or in the project root directory:

       $ man -M man turnserver

       to see the man page.

       In  the  docs/html  subdirectory  of  the  original archive tree, you will find the client
       library    reference.    After    the    installation,    it    will    be    placed    in
       PREFIX/share/doc/turnserver/html.

=================================

LOGS

       When  the  TURN Server starts, it makes efforts to create a log file turn_<pid>.log in the
       following directories:

              •  /var/log

              •  /log/

              •  /var/tmp/tmp

              •  current directory

       If all efforts failed (due to the system permission settings) then all  log  messages  are
       sent only to the standard output of the process.

       This behavior can be controlled by --log-file, --syslog and --no-stdout-log options.

=================================

HTTPS MANAGEMENT INTERFACE

       The  turnserver  process  provides  an HTTPS Web access as statistics and basic management
       interface. The turnserver listens to incoming HTTPS admin connections on the same ports as
       the main TURN/STUN listener. The Web admin pages are basic and self-explanatory.

       To  make  the HTTPS interface active, the database table admin_user must be populated with
       the admin user account(s). An admin user  can  be  a  superuser  (if  not  assigned  to  a
       particular  realm)  or  a  restricted  user (if assigned to a realm). The restricted admin
       users can perform only limited actions, within their corresponding realms.

=================================

TELNET CLI

       The turnserver process provides a telnet CLI access as  statistics  and  basic  management
       interface.  By  default,  the  turnserver starts a telnet CLI listener on IP 127.0.0.1 and
       port 5766. That can be changed by the command-cline options of the turnserver process (see
       --cli-ip  and  --cli-port  options).  The  full list of telnet CLI commands is provided in
       "help" command output in the telnet CLI.

=================================

CLUSTERS

       TURN Server can be a part of the cluster installation. But, to  support  the  "even  port"
       functionality  (RTP/RTCP  streams  pairs) the client requests from a particular IP must be
       delivered to the same TURN Server instance, so it requires some networking setup massaging
       for  the cluster. The reason is that the RTP and RTCP relaying endpoints must be allocated
       on the same relay IP. It would be possible to design a scheme with  the  application-level
       requests forwarding (and we may do that later) but it would affect the performance.

=================================

FILES

       /etc/turnserver.conf

       /var/db/turndb

       /usr/local/var/db/turndb

       /var/lib/turn/turndb

       /usr/local/etc/turnserver.conf

=================================

DIRECTORIES

       /usr/local/share/turnserver

       /usr/local/share/doc/turnserver

       /usr/local/share/examples/turnserver

=================================

STANDARDS

       obsolete STUN RFC 3489

       new STUN RFC 5389

TURN RFC 5766

       TURN-TCP extension RFC 6062

       TURN IPv6 extension RFC 6156

       STUN/TURN test vectors RFC 5769

       STUN NAT behavior discovery RFC 5780

=================================

SEE ALSO

       turnadmin, turnutils

======================================

   WEB RESOURCES
       project page:

       https://github.com/coturn/coturn/

       Wiki page:

       https://github.com/coturn/coturn/wiki

       forum:

       https://groups.google.com/forum/?fromgroups=#!forum/turn-server-project-rfc5766-turn-server

======================================

   AUTHORS
       Oleg Moskalenko <mom040267@gmail.com>

       Gabor Kovesdan http://kovesdan.org/

       Daniel Pocock http://danielpocock.com/

       John Selbie (jselbie@gmail.com)

       Lee Sylvester <lee@designrealm.co.uk>

       Erik Johnston <erikj@openmarket.com>

       Roman Lisagor <roman@demonware.net>

       Vladimir Tsanev <tsachev@gmail.com>

       Po-sheng Lin <personlin118@gmail.com>

       Peter Dunkley <peter.dunkley@acision.com>

       Mutsutoshi Yoshimoto <mutsutoshi.yoshimoto@mixi.co.jp>

       Federico Pinna <fpinna@vivocha.com>

       Bradley T. Hughes <bradleythughes@fastmail.fm>

       Mihály Mészáros <misi@majd.eu>

   ACTIVE MAINTAINERS
       Mihály Mészáros <misi@majd.eu>

                                         10 January 2021                                  TURN(1)