Provided by: printer-driver-foo2zjs-common_20200505dfsg0-2ubuntu2.22.04.1_all bug

NAME

       foo2lava-wrapper - Convert Postscript into a LAVAFLOW or OPL printer stream

SYNOPSIS

       foo2lava-wrapper [options] [ps-file]

DESCRIPTION

       foo2lava-wrapper is a Foomatic compatible printer wrapper for the foo2lava printer driver.
       This script reads a Postscript ps-file or standard input and converts it  to  Zenographics
       LAVAFLOW  printer  format  for  driving  the  Konica  Minolta  magicolor 1600W color laser
       printer, the Konica Minolta  magicolor  1680MF/1690MF  AIO  printer,  the  Konica  Minolta
       magicolor  2480/2490  MF  AIO  printer, the Konica Minolta magicolor 2530 DL network color
       laser printer, and other Zenographics-based LAVAFLOW printers.

       This script can be used in a standalone fashion, but is  intended  to  be  called  from  a
       printer spooler system which uses the Foomatic printer database.

COMMAND LINE OPTIONS

   Normal Options
       These  are  the  options  used  to  select  the parameters of a print job that are usually
       controlled on a per job basis.

       -c     Print in color (else monochrome).

       -C colormode
              Color correction mode [0].

               1   Photos (using m2300w CRDs)
               2   Photos and text (using m2300w CRDs)
               3   Graphics and text (using m2300w CRDs)
              10   ICM color profile (using -G *.icm file)

       -d duplex
              Duplex code to send to printer [1].
              │        │               │
              │1   off │ 2   long edge │ 3   short edge

       -m media
              Media code to send to printer [0].

              ──────────────────────────
              Media          2530DL
              ──────────────────────────
              plain             0
              transparency      4
              thick stock      20
              envelope         22
              letterhead       23
              postcard         25
              labels           26
              recycled         27

       -p paper
              Paper size code to send to printer [2].

              ┌──────────────────┬─────────────────────┐
              │  1   executive   │  25   A5            │
              │  2   letter      │  26   A4            │
              │  3   legal       │  45   B5jis         │
              │ 80   env Monarch │  65   B5iso         │
              │ 81   env #10     │  90   env DL        │
              │ 91   env C5      │  92   env B5        │
              │835   4x6" photo  │ 837   10x15cm photo │
              └──────────────────┴─────────────────────┘
       -n copies
              Number of copies [1].

       -r xresxyres
              Set device resolution in pixels/inch [1200x600].

       -s source
              Source (Input Slot) code to send to printer [255].
              │           │
              │1   Tray 1 │ 255   auto
              │4   Tray 2 │

       -t     Draft mode.  Every other pixel is white.

       -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
              Print in N-up.  Requires the psutils package.

       -o orient
              Orientation used for N-up.

              Portrait    -op   (normal)
              Landscape   -ol   (rotated 90 degrees anticlockwise)
              Seascape    -os   (rotated 90 degrees clockwise)

   Printer Tweaking Options
       These are the options used to  customize  the  operation  of  foo2lava  for  a  particular
       printer.

       -u xoffxyoff
              Set  the offset of the start of the printable region from the upper left corner, in
              pixels [varies with paper size].  The  defaults  should  work  on  the  2200DL  and
              2300DL, and have not been tested on any other printers.

       -l xoffxyoff
              Set  the  offset of the end of the printable region from the lower right corner, in
              pixels [varies with paper size].  The  defaults  should  work  on  the  2200DL  and
              2300DL, and have not been tested on any other printers.

       -L mask
              Send  the  logical  clipping  values  from -u/-l in the LAVAFLOW stream.  foo2lava-
              wrapper always runs Ghostscript with the ideal page dimensions, so that  the  scale
              of  the  image  is  correct,  regardless whether or not the printer has unprintable
              regions.  This option is used to move the position of the  clipped  image  back  to
              where  it belongs on the page.  The default is to send the amount which was clipped
              by -u and -l, and should be good in most cases.

              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

       -z model
              Model.  The  default is [0].

              model   protocol   Description
              0       LAVAFLOW   magicolor 2490 MF
              0       LAVAFLOW   magicolor 2530 DL
              1       OPL        magicolor 2480 MF
              2       LAVAFLOW   magicolor 1600W
              2       LAVAFLOW   magicolor 1680MF
              2       LAVAFLOW   magicolor 1690MF

   Color Tweaking Options
       These are the options used to control the quality of color output.   Color  correction  is
       currently a WORK IN PROGRESS.

       -g gsopts
              Additional  options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc.  This
              option may appear more than once.

       -G profile.icm
              Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-
              icc2ps  and  adjust  the  printer  colors by using the Postscript setcolorrendering
              operator.  (WORK IN PROGRESS).

       -G gamma-file.ps
              Prepend gamma-file.ps to the Postscript input to perform color correction using the
              setcolortransfer Postscript operator.  For example, the file might contain:
              {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

       -I intent
              Select   profile   intent   from   the  ICM  file.   0=Perceptual,  1=Colorimetric,
              2=Saturation, 3=Absolute.  Default is 0 (perceptual).

   Debugging Options
       These options are used for debugging foo2lava and its wrapper.

       -S plane
              Output just a single color plane from a color print  and  print  it  on  the  black
              plane.  The default is to output all color planes.

              1   Cyan
              2   Magenta
              3   Yellow
              4   Black

       -D level
              Set Debug level [0].

EXAMPLES

       Create a monochrome LAVAFLOW stream from a Postscript document, examine it, and then print
       it using a RAW print queue:

              foo2lava-wrapper testpage.ps > testpage.zm
              lavadecode < testpage.zm
              lpr -P raw testpage.zm

       Create a color LAVAFLOW stream from a Postscript document:

              foo2lava-wrapper -c testpage.ps > testpage.zc

FILES

       /usr/bin/foo2lava-wrapper

SEE ALSO

       foo2lava(1), lavadecode(1) opldecode(1)

AUTHOR

       Rick Richardson <rick.richardson@comcast.net>
       http://foo2zjs.rkkda.com/