Provided by: printer-driver-foo2zjs-common_20200505dfsg0-2ubuntu2.22.04.1_all bug

NAME

       foo2qpdl-wrapper - Convert Postscript into a QPDL printer stream

SYNOPSIS

       foo2qpdl-wrapper [options] [ps-file]

DESCRIPTION

       foo2qpdl-wrapper is a Foomatic compatible printer wrapper for the foo2qpdl printer driver.
       This script reads a Postscript ps-file or standard input and converts it to  Samsung/Xerox
       QPDL  printer  format  for  driving  the  Samsung  CLP-300,  CLX-2160,  CLX-3160, CLP-315,
       CLX-3175, CLP-600,  CLP-610,  CLP-620,  CLP-360,  CLP-365,  and  Xerox  Phaser  6110  QPDL
       printers.

       This  script  can  be  used  in  a standalone fashion, but is intended to be called from a
       printer spooler system which uses the Foomatic printer database.

COMMAND LINE OPTIONS

   Normal Options
       These are the options used to select the parameters  of  a  print  job  that  are  usually
       controlled on a per job basis.

       -c     Print in color (else monochrome).

       -C colormode
              Color correction mode [0].

               1   CRD
              10   ICM color profile (using -G *.icm file)

       -d duplex
              Duplex code to send to printer [1].
              │        │               │
              │1   off │ 2   long edge │ 3   short edge

       -m media
              Media code to send to printer [0].

              ────────────────────────
              Media          QPDL
              ────────────────────────
              plain            0
              thick            1
              thin             2
              bond             3
              color            4
              card             5
              labels           6
              envelope         7
              preprinted       8
              cotton           9
              recycled        10
              transparency    11
              archive         12

       -p paper
              Paper size code to send to printer [0].

              ┌──────────────┬──────────────────┐
              │ 0   letter   │  1   legal       │
              │ 2   A4       │  3   executive   │
              │ 6   env #10  │  7   env Monarch │
              │ 8   env C5   │  9   env DL      │
              │11   B5jis    │ 12   B5iso       │
              │16   A5       │ 17   A6          │
              │23   env C6   │ 24   folio       │
              │25   env 6.75 │ 26   env #9      │
              │28   oficio   │                  │
              └──────────────┴──────────────────┘
       -n copies
              Number of copies [1].

       -r xresxyres
              Set device resolution in pixels/inch [1200x600].

       -s source
              Source (Input Slot) code to send to printer [255].
              │          │
              │1   auto  │ 2   manual
              │3   multi │ 4   tray1

       -t     Draft mode.  Every other pixel is white.

       -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
              Print in N-up.  Requires the psutils package.

       -o orient
              Orientation used for N-up.

              Portrait    -op   (normal)
              Landscape   -ol   (rotated 90 degrees anticlockwise)
              Seascape    -os   (rotated 90 degrees clockwise)

   Printer Tweaking Options
       These  are  the  options  used  to  customize  the  operation of foo2qpdl for a particular
       printer.

       -u xoffxyoff
              Set the offset of the start of the printable region from the upper left corner,  in
              pixels [varies with paper size].

       -l xoffxyoff
              Set  the  offset of the end of the printable region from the lower right corner, in
              pixels [varies with paper size].

       -L mask
              Send the logical clipping values from -u/-l in the QPDL  stream.   foo2qpdl-wrapper
              always  runs  Ghostscript  with the ideal page dimensions, so that the scale of the
              image is correct, regardless whether or not the printer  has  unprintable  regions.
              This  option  is  used  to  move the position of the clipped image back to where it
              belongs on the page.  The default is to send the amount which was clipped by -u and
              -l, and should be good in most cases.

              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

       -z model
              Printer model. Model 0 is the default.

              model   Description
              0       CLP-300, CLX-2160, CLX-3160
              1       CLP-600
              2       CLP-310, CLP-315, CLP-610, CLX-3175
              3       CLP-620, CLP-360, CLP-365

   Color Tweaking Options
       These  are  the  options used to control the quality of color output.  Color correction is
       currently a WORK IN PROGRESS.

       -a parm=val
              Color Adjust.  parm is b, c, s, cr, mg, yb for  brightness,  contrast,  saturation,
              cyan-red balance, magenta-green balance, and yellow-blue balance.  val is 0 to 100.
              Multiple options are allowed.  The default is "-ab=50 -ac=50 -as=50 -acr=50 -amg=50
              -ayb=50".  This only works when the -z3 (e.g. CLP-365) model is set!

       -g gsopts
              Additional  options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc.  This
              option may appear more than once.

       -G profile.icm
              Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-
              icc2ps  and  adjust  the  printer  colors by using the Postscript setcolorrendering
              operator.  (WORK IN PROGRESS).

       -G gamma-file.ps
              Prepend gamma-file.ps to the Postscript input to perform color correction using the
              setcolortransfer Postscript operator.  For example, the file might contain:
              {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

       -I intent
              Select   profile   intent   from   the  ICM  file.   0=Perceptual,  1=Colorimetric,
              2=Saturation, 3=Absolute.  Default is 0 (perceptual).

   Debugging Options
       These options are used for debugging foo2qpdl and its wrapper.

       -S plane
              Output just a single color plane from a color print  and  print  it  on  the  black
              plane.  The default is to output all color planes.

              1   Cyan
              2   Magenta
              3   Yellow
              4   Black

       -D level
              Set Debug level [0].

EXAMPLES

       Create  a monochrome QPDL stream from a Postscript document, examine it, and then print it
       using a RAW print queue:

              foo2qpdl-wrapper testpage.ps > testpage.zm
              qpdldecode < testpage.zm
              lpr -P raw testpage.zm

       Create a color QPDL stream from a Postscript document:

              foo2qpdl-wrapper -c testpage.ps > testpage.zc

FILES

       /usr/bin/foo2qpdl-wrapper

SEE ALSO

       foo2qpdl(1), qpdldecode(1)

AUTHOR

       Rick Richardson <rick.richardson@comcast.net>
       http://foo2qpdl.rkkda.com/