Provided by: grass-doc_7.8.7-1_all bug

NAME

       v.edit   -  Edits  a  vector  map,  allows  adding, deleting and modifying selected vector
       features.

KEYWORDS

       vector, geometry, editing, line, node, point, vertex, level1

SYNOPSIS

       v.edit
       v.edit --help
       v.edit  [-rcnb1p]  map=name   [layer=string]     [type=string[,string,...]]    tool=string
       [input=name]    [move=x,y,z]    [threshold=float[,float,...]]   [ids=range]   [cats=range]
       [coords=x,y[,x,y,...]]   [bbox=x1,y1,x2,y2]   [polygon=x,y[,x,y,...]]    [where=sql_query]
       [query=string]        [bgmap=name[,name,...]]       [snap=string]       [zbulk=value,step]
       [--overwrite]  [--help]  [--verbose]  [--quiet]  [--ui]

   Flags:
       -r
           Reverse selection

       -c
           Close added boundaries (using threshold distance)

       -n
           Do not expect header of input data

       -b
           Do not build topology
           Advantageous when handling a large number of points

       -1
           Modify only first found feature in bounding box

       -p
           Connect parallel lines (using extend tools and threshold distance)

       --overwrite
           Allow output files to overwrite existing files

       --help
           Print usage summary

       --verbose
           Verbose module output

       --quiet
           Quiet module output

       --ui
           Force launching GUI dialog

   Parameters:
       map=name [required]
           Name of vector map to edit
           Or data source for direct OGR access

       layer=string
           Layer number or name
           Vector features can have category values in different layers. This  number  determines
           which layer to use. When used with direct OGR access this is the layer name.
           Default: 1

       type=string[,string,...]
           Input feature type
           Options: point, line, boundary, centroid
           Default: point,line,boundary,centroid

       tool=string [required]
           Tool
           Options:  create,  add,  delete, copy, move, flip, catadd, catdel, merge, break, snap,
           connect, extend, extendstart, extendend,  chtype,  vertexadd,  vertexdel,  vertexmove,
           areadel, zbulk, select
           create: Create new (empty) vector map
           add: Add new features to existing vector map
           delete: Delete selected features from vector map
           copy: Copy selected features
           move: Move selected features in vector map
           flip: Flip direction of selected vector lines
           catadd: Set new categories to selected vector features for defined layer
           catdel: Delete categories from selected vector features for defined layer
           merge: Merge selected vector lines
           break: Break/split vector lines
           snap: Snap vector features in given threshold
           connect: Connect two lines
           extend: Extend lines
           extendstart: Extend start nodes
           extendend: Extend end nodes
           chtype: Change feature type (point<->centroid, line<->boundary)
           vertexadd: Add new vertex to selected vector lines
           vertexdel: Remove vertex from selected vector lines
           vertexmove: Move vertex of selected vector lines
           areadel: Delete selected areas from vector map (based on selected centroids)
           zbulk: Z bulk-labeling (automated assignment of z coordinate to vector lines)
           select: Select lines and print their ID’s

       input=name
           Name of file containing data in GRASS ASCII vector format
           ’-’ for standard input

       move=x,y,z
           Difference in x,y,z direction for moving feature or vertex

       threshold=float[,float,...]
           Threshold distance (coords,snap,query)
           ’-1’ for threshold based on the current resolution settings
           Default: -1,0,0

       ids=range
           Feature ids
           Example: 1,3,7-9,13

       cats=range
           Category values
           Example: 1,3,7-9,13

       coords=x,y[,x,y,...]
           List of point coordinates

       bbox=x1,y1,x2,y2
           Bounding box for selecting features

       polygon=x,y[,x,y,...]
           Polygon for selecting features

       where=sql_query
           WHERE conditions of SQL statement without ’where’ keyword
           Example: income < 1000 and population >= 10000

       query=string
           Query tool
           For ’shorter’ use negative threshold value, positive value for ’longer’
           Options: length, dangle
           length: Select only lines or boundaries shorter/longer than threshold distance
           dangle: Select dangles shorter/longer than threshold distance

       bgmap=name[,name,...]
           Name of background vector map(s)

       snap=string
           Snap added or modified features in the given threshold to the nearest existing feature
           Options: no, node, vertex
           Default: no
           no: Not apply snapping
           node: Snap only to node
           vertex: Allow snapping also to vertex

       zbulk=value,step
           Starting value and step for z bulk-labeling
           Pair: value,step (e.g. 1100,10)

DESCRIPTION

       The module v.edit allows the user to edit a vector map via command line interface.

       v.edit  supports  only  "simple" vector features: points, centroids, lines and boundaries.
       Currently, only 2D vector features (except of tool=zbulk) are supported.

       Provides editing features’ geometry. Attribute data connected to the vector  map  are  not
       modified at all.

       Vector  features  can be selected either by internal id, category number cats, coordinates
       coords, bounding box  bbox,  polygon,  where  statement  (attribute  data)  or  by  query.
       Selecting  features  by  coordinates  is  affected  by the current 2D resolution or by the
       threshold distance given by threshold. The options are orthogonal, i.e.  can  be  used  in
       various combinations. For example:
       v.edit map=roads tool=select \
         coord=599505,4921010,603389.0625,4918292.1875 \
         threshold=10000 where="label=’interstate’"
       selects  all  features  (and prints their id’s to standard output) covered by two bounding
       boxes (center at 599505,4921010 and 603389.0625,4918292.1875, size 2*10000) with attribute
       label=’interstate’.

NOTES

       If  no  vector  features are selected or the flag -b is used, topology is not build at the
       end.

USAGE

   Feature selection
       Vector features can be selected in several ways:

           •   ids - using internal (unique) feature id’s

           •   cats - using category numbers

           •   coords - using x,y coordinate pairs (center  of  bounding  box,  size  defined  by
               threshold)

           •   bbox - using bounding box

           •   polygon - using polygon (at least 3 coordinate pairs have to be set)

           •   where - using where statement (attribute data)

           •   query - special query (e.g. minimal vector line length)
       Additional parameters for vector feature specification are:

           •   layer - layer number (currently used only with cats or where option)

           •   threshold - threshold distance used for selecting vector features by coordinates

   Tool descriptioncreate  -  Create  new (empty) vector map (see also v.in.ascii). Optionally vector
               features (in GRASS ASCII vector format) can be read from standard input  (input=-)
               or from the text file given by the input option.

           •   add  -  Add new vector features (defined in GRASS ASCII vector format) to existing
               vector map. Features can be read from standard input or from the given  text  file
               (input  option).  If  no header is given, the -n flag must be used. Added features
               can be snapped (defined by snap parameter) to nodes or vertices based on threshold
               distance threshold.

           •   delete - Delete selected vector features from existing vector map.

           •   copy - Make identical copy of selected vector features. If background map bgmap is
               given copy features from background map, not from currently modified vector map.

           •   move - Move selected features of existing vector map relatively to  their  current
               location.  This  tool  requires move option. The option defines coordinates of the
               movement direction. Moved features can be snapped (defined by snap  parameter)  to
               nodes or vertices based on threshold distance threshold.

           •   flip - Flip direction of selected vector lines (lines or boundaries).

           •   catadd  -  Add new layer category(ies) to selected vector feature(s). Category can
               be later used for new database entry.

           •   catdel - Delete layer category(ies) of selected vector feature(s).

           •   merge - Merge (at least two) selected vector lines or boundaries. The geometry  of
               the merged vector lines can be changed. If the second line from two selected lines
               is in opposite direction to the  first,  it  will  be  flipped.  See  also  module
               v.build.polylines.

           •   break  -  Split  given vector line or boundary into two lines on location given by
               coords. If coords not given, breaks all selected lines at each intersection (based
               on v.clean, tool=break).

           •   snap - Snap vector features in given threshold. See also module v.clean. Note that
               this tool supports only snapping to nodes. Parameters snap and bgmap are ignored.

           •   connect - Connect selected lines or boundaries, the first given line is  connected
               to the second one. The second line is broken if necessary. The lines are connected
               only if distance between them is not  greater  than  snapping  threshold  distance
               threshold.

           •   extend  -  Extend selected lines or boundaries without changing the current shape.
               Similar to connect, but the first and second lines are both  extended  until  they
               intersect.  The second line is broken if necessary. The lines are extended only if
               distance between them is not greater than snapping threshold  distance  threshold.
               If  the  first  and  second  lines are parallel and do not intersect, no lines are
               extended. Use the -p flag to extend the first line across the parallel gap.

           •   extendstart - Similar to extend, but extend at start nodes only. Start  nodes  are
               used  to select the second line and the end node of that line can also be extended
               if it is within the snapping threshold distance given by threshold.

           •   extendend - Similar to extend, but extend at end nodes only.

           •   chtype - Change feature type of selected geometry objects. Points are converted to
               centroids, centroids to points, lines to boundaries and boundaries to lines.

           •   vertexadd  -  Add vertex(ces) to the given vector lines or boundaries. Location of
               the new vertex is given by coord option. If -1 is given only first found  line  or
               boundary in bounding box is modified.

           •   vertexdel  -  Remove  vertex(ces)  specified by coords option. If -1 is given only
               first found line or boundary in bounding box is modified.

           •   vertexmove - Move  vertex(ces)  specified  by  coords  option.  Direction  of  the
               movement  is specified by the move option. If -1 is given only first found line or
               boundary in bounding box is modified. Moved vertex can be snapped  (defined  snap)
               to nodes or vertices based on threshold distance threshold.

           •   zbulk  -  Assign  z coordinate to 3D vector lines in given bounding box. The first
               found line will get z coordinate based  on  value  given  by  zbulk  parameter.  Z
               coordinate  of  other  selected  lines  will  be  increased by step given by zbulk
               parameter. This tool strictly requires bbox and zbulk parameter. Also input vector
               map must be 3D.

           •   select - Print comma separated list of selected line id’s. No editing is done.

EXAMPLES

   Create new vector map
       Create new (empty) vector map:
       v.edit tool=create map=vectmap
       Create new vector map and read data from file ’roads.txt’:
       v.out.ascii in=roads format=standard > roads.txt;
       v.edit tool=create map=vectmap input=roads.txt
       or alternatively
       cat roads.txt | v.edit tool=create map=vectmap input=-

   Add new features to existing vector map
       Add a new point to the vector map (without header):
       echo "P 1 1
        640794 214874
        1 1" | v.edit -n tool=add map=vectmap input=-
       # insert new row for each category in attribute table if doesn’t exist yet
       v.to.db map=vectmap option=cat
       The input must be in GRASS ASCII vector format.

       Add new features read from standard input:
       v.out.ascii in=railroads format=standard | v.edit tool=add map=vectmap input=-

   Delete selected features from vector map layer
       Remove all vector features with category number 1 or 2:
       v.edit tool=delete map=roads cats=1,2
       Remove  all  vector  features  except  of  those  with  category  number  1  or 2 (reverse
       selection):
       v.edit -r tool=delete map=roads cats=1,2
       Remove features with category 1 or 2 located on coordinates  600952.625,4926107  (bounding
       box based on the current 2D resolution):
       g.region -d;
       v.edit tool=delete map=roads cats=1,2 coords=600952.625,4926107
       Remove  all  features  with  category  1  and  2  covered  by  two  bounding boxes (center
       coordinates 592542.892,4924766.996 and 603389.062,4918292.187, size 1000 map units):
       v.edit map=roads tool=delete \
         coord=592542.892,4924766.996,603389.062,4918292.187 \
         threshold=1000 cat=1,2

   Copy selected features from background map
       Copy all features with category number 1 from background map:
       v.edit map=roads tool=copy bgmap=archsites cat=1

   Move features
       Move  feature  (vector  point)  located  on  coordinates  602580,4918480  to   coordinates
       603580,4919480:
       v.edit tool=move map=archsites coord=602580,4918480 th=1e-2 move=1000,1000
       Move  all  features  with  category 1 1000 map units to the west and 1000 map units to the
       south. Moved features snap to nodes in threshold distance 10 map units:
       v.edit tool=move map=roads cat=1 move=1000,-1000 snap=node threshold=-1,10
       Move all features defined by bounding box 601530,4921560,602520,4922310 (W,S,E,N) 1000 map
       units to the east and 1000 map units to the north:
       v.edit tool=move map=roads bbox=601530,4921560,602520,4922310 move=-1000,1000

   Flip direction of vector lines
       Flip direction of all vector lines:
       v.edit tool=flip map=streams cats=1-9999 type=line

   Add / delete layer category number
       Add new layer/category 2/1, 2/3, 2/4, 2/5 to features covered by given polygon:
       v.edit tool=catadd map=roads \
         polygon=599877.75,4925088.375,597164.812,4922524.5,601338.562,4920914.625 \
         layer=2 cat=1,3-5
       Delete layer/category 1/1, line id 1:
       v.edit tool=catdel map=roads id=1 cats=5

   Merge lines
       Merge two lines with given category number:
       v.edit map=roads tool=merge cat=4

   Split line on given point
       Split line id 810 on coordinates 604268,4923570 in threshold 50 map units:
       v.edit map=roads tool=break coords=604268,4923570 id=810 threshold=50

   Break selected lines at each intersection
       Break selected lines (with category number 1) at each intersection:
       v.edit map=roads tool=break cat=1

   Snap lines
       Snap all lines using threshold distance 20 map units:
       v.edit map=roads id=1-9999 tool=snap threshold=-1,20 type=line

   Connect lines
       Connect line id 48 to line id 565:
       v.edit map=roads tool=connect id=48,565
       Connect line id 48 to line id 565; line id 60 to line id 50. Maximum threshold distance is
       700 map units:
       v.edit map=roads tool=connect id=48,565,60,50 threshold=-1,700

   Add vertex
       Add new vertex to the line located at 600952,4926107, threshold is set to 1 map unit:
       v.edit tool=vertexadd map=roads coords=600952,4926107 threshold=1

   Delete vertices
       Delete vertex located at 593191.608,4925684.849 (threshold set to 0.1 map units).   Modify
       only lines with category 1:
       v.edit tool=vertexdel map=roads coord=593191.608,4925684.849 \
         threshold=1-e1 cats=1

   Move vertices
       Move  vertices  located  at  604441,4921088 (threshold set to 100 map units).  Modify only
       lines with categories 1-10:
       v.edit tool=vertexmove map=roads cats=1-10 coord=604441,4921088 \
         threshold=100 move=1000,1000

   Select features and print their id’s
       Print id’s of selected features, e.g.:
       v.edit map=soils@PERMANENT tool=select \
         bbox=595733.8125,4919781.75,598536.1875,4917396.75 --q
       Example with d.vect:
       d.erase;
       d.vect roads;
       d.vect -i map=roads cats=`v.edit map=roads tool=select \
         coord=592542.89243878,4924766.99622811,603389.0625,4918292.1875 \
         threshold=1000 --q` col=red
       Select all lines shorter (or equal) than 10 map units:
       v.edit map=roads tool=select query=length threshold=-1,0,-10
       Select from given bounding box all lines longer then 200 map units:
       v.edit map=roads tool=select bbox=598260,4919730,605100,4926240 query=length threshold=-1,0,200

   Fix height of contours
       Input vector map contains 2D lines representing contours. Height  can  be  assign  to  the
       contours using tool=zbulk. First of all 2D lines need to be converted to 3D lines:
       v.extrude input=line2 output=line3 height=0 type=line
       All lines which intersect with the line given by coordinates will be modified. First found
       line will get height 1000 map units, height of other selected lines will be  increased  by
       10 map units.
       v.edit a2 tool=zbulk bbox=586121.25049368,4911970.21547109,603092.60466035,4927071.25713776 \
          zbulk=1000,10

SEE ALSO

        v.in.ascii, v.info, v.build, v.build.polylines, v.clean, v.extrude, v.split

       See also wxGUI vector digitizer.

AUTHORS

       Original author: Wolf Bergenheim - independent developer
       Initial  updates:  Jachym  Cepicky, Mendel University of Agriculture and Forestry in Brno,
       Czech Republic
       Major update by Martin Landa, FBK-irst (formerly ITC-irst), Trento, Italy
       Extend tools by Huidae Cho

SOURCE CODE

       Available at: v.edit source code (history)

       Accessed: unknown

       Main index | Vector index | Topics index | Keywords index | Graphical index | Full index

       © 2003-2022 GRASS Development Team, GRASS GIS 7.8.7 Reference Manual