Provided by: samba-common-bin_4.15.13+dfsg-0ubuntu1.6_amd64 bug

NAME

       samba-tool - Main Samba administration tool.

SYNOPSIS

       samba-tool [-h] [-W myworkgroup] [-U user] [-d debuglevel] [--v]

DESCRIPTION

       This tool is part of the samba(7) suite.

OPTIONS

       -h|--help
           Show this help message and exit

       -r|--realm=REALM
           Set the realm for the domain.

           Note that specifying this parameter here will override the realm parameter in the
           smb.conf file.

       --simple-bind-dn=DN
           DN to use for a simple bind.

       --password
           Specify the password on the commandline.

           Be cautious about including passwords in scripts or passing user-supplied values onto
           the command line. For security it is better to let the Samba client tool ask for the
           password if needed, or obtain the password once with kinit.

           If --password is not specified, the tool will check the PASSWD environment variable,
           followed by PASSWD_FD which is expected to contain an open file descriptor (FD)
           number.

           Finally it will check PASSWD_FILE (containing a file path to be opened). The file
           should only contain the password. Make certain that the permissions on the file
           restrict access from unwanted users!

           While Samba will attempt to scrub the password from the process title (as seen in ps),
           this is after startup and so is subject to a race.

       -U|--user=[DOMAIN\]USERNAME[%PASSWORD]
           Sets the SMB username or username and password.

           If %PASSWORD is not specified, the user will be prompted. The client will first check
           the USER environment variable (which is also permitted to also contain the password
           seperated by a %), then the LOGNAME variable (which is not permitted to contain a
           password) and if either exists, the value is used. If these environmental variables
           are not found, the username found in a Kerberos Credentials cache may be used.

           A third option is to use a credentials file which contains the plaintext of the
           username and password. This option is mainly provided for scripts where the admin does
           not wish to pass the credentials on the command line or via environment variables. If
           this method is used, make certain that the permissions on the file restrict access
           from unwanted users. See the -A for more details.

           Be cautious about including passwords in scripts or passing user-supplied values onto
           the command line. For security it is better to let the Samba client tool ask for the
           password if needed, or obtain the password once with kinit.

           While Samba will attempt to scrub the password from the process title (as seen in ps),
           this is after startup and so is subject to a race.

       -W|--workgroup=WORKGROUP
           Set the SMB domain of the username. This overrides the default domain which is the
           domain defined in smb.conf. If the domain specified is the same as the servers NetBIOS
           name, it causes the client to log on using the servers local SAM (as opposed to the
           Domain SAM).

           Note that specifying this parameter here will override the workgroup parameter in the
           smb.conf file.

       -N|--no-pass
           If specified, this parameter suppresses the normal password prompt from the client to
           the user. This is useful when accessing a service that does not require a password.

           Unless a password is specified on the command line or this parameter is specified, the
           client will request a password.

           If a password is specified on the command line and this option is also defined the
           password on the command line will be silently ignored and no password will be used.

       --use-kerberos=desired|required|off
           This parameter determines whether Samba client tools will try to authenticate using
           Kerberos. For Kerberos authentication you need to use dns names instead of IP
           addresses when connnecting to a service.

           Note that specifying this parameter here will override the client use kerberos
           parameter in the smb.conf file.

       --use-krb5-ccache=CCACHE
           Specifies the credential cache location for Kerberos authentication.

           This will set --use-kerberos=required too.

       --ipaddress=IPADDRESS
           IP address of the server

       -d|--debuglevel=DEBUGLEVEL
           level is an integer from 0 to 10. The default value if this parameter is not specified
           is 1 for client applications.

           The higher this value, the more detail will be logged to the log files about the
           activities of the server. At level 0, only critical errors and serious warnings will
           be logged. Level 1 is a reasonable level for day-to-day running - it generates a small
           amount of information about operations carried out.

           Levels above 1 will generate considerable amounts of log data, and should only be used
           when investigating a problem. Levels above 3 are designed for use only by developers
           and generate HUGE amounts of log data, most of which is extremely cryptic.

           Note that specifying this parameter here will override the log level parameter in the
           smb.conf file.

       --debug-stdout
           This will redirect debug output to STDOUT. By default all clients are logging to
           STDERR.

COMMANDS

   computer
       Manage computer accounts.

   computer add computername [options]
       Add a new computer to the Active Directory Domain.

       The new computer name specified on the command is the sAMAccountName, with or without the
       trailing dollar sign.

       --computerou=COMPUTEROU
           DN of alternative location (with or without domainDN counterpart) to default
           CN=Computers in which new computer object will be created. E.g. 'OU=OUname'.

       --description=DESCRIPTION
           The new computers's description.

       --ip-address=IP_ADDRESS_LIST
           IPv4 address for the computer's A record, or IPv6 address for AAAA record, can be
           provided multiple times.

       --service-principal-name=SERVICE_PRINCIPAL_NAME_LIST
           Computer's Service Principal Name, can be provided multiple times.

       --prepare-oldjoin
           Prepare enabled machine account for oldjoin mechanism.

   computer create computername [options]
       Add a new computer. This is a synonym for the samba-tool computer add command and is
       available for compatibility reasons only. Please use samba-tool computer add instead.

   computer delete computername [options]
       Delete an existing computer account.

       The computer name specified on the command is the sAMAccountName, with or without the
       trailing dollar sign.

   computer edit computername
       Edit a computer AD object.

       The computer name specified on the command is the sAMAccountName, with or without the
       trailing dollar sign.

       --editor=EDITOR
           Specifies the editor to use instead of the system default, or 'vi' if no system
           default is set.

   computer list
       List all computers.

   computer move computername new_parent_dn [options]
       This command moves a computer account into the specified organizational unit or container.

       The computername specified on the command is the sAMAccountName, with or without the
       trailing dollar sign.

       The name of the organizational unit or container can be specified as a full DN or without
       the domainDN component.

   computer show computername [options]
       Display a computer AD object.

       The computer name specified on the command is the sAMAccountName, with or without the
       trailing dollar sign.

       --attributes=USER_ATTRS
           Comma separated list of attributes, which will be printed.

   contact
       Manage contacts.

   contact add [contactname] [options]
       Add a new contact to the Active Directory Domain.

       The name of the new contact can be specified by the first argument 'contactname' or the
       --given-name, --initial and --surname arguments. If no 'contactname' is given, contact's
       name will be made up of the given arguments by combining the given-name, initials and
       surname. Each argument is optional. A dot ('.') will be appended to the initials
       automatically.

       --ou=OU
           DN of alternative location (with or without domainDN counterpart) in which the new
           contact will be created. E.g. 'OU=OUname'. Default is the domain base.

       --description=DESCRIPTION
           The new contacts's description.

       --surname=SURNAME
           Contact's surname.

       --given-name=GIVEN_NAME
           Contact's given name.

       --initials=INITIALS
           Contact's initials.

       --display-name=DISPLAY_NAME
           Contact's display name.

       --job-title=JOB_TITLE
           Contact's job title.

       --department=DEPARTMENT
           Contact's department.

       --company=COMPANY
           Contact's company.

       --mail-address=MAIL_ADDRESS
           Contact's email address.

       --internet-address=INTERNET_ADDRESS
           Contact's home page.

       --telephone-number=TELEPHONE_NUMBER
           Contact's phone number.

       --mobile-number=MOBILE_NUMBER
           Contact's mobile phone number.

       --physical-delivery-office=PHYSICAL_DELIVERY_OFFICE
           Contact's office location.

   contact create [contactname] [options]
       Add a new contact. This is a synonym for the samba-tool contact add command and is
       available for compatibility reasons only. Please use samba-tool contact add instead.

   contact delete contactname [options]
       Delete an existing contact.

       The contactname specified on the command is the common name or the distinguished name of
       the contact object. The distinguished name of the contact can be specified with or without
       the domainDN component.

   contact edit contactname
       Modify a contact AD object.

       The contactname specified on the command is the common name or the distinguished name of
       the contact object. The distinguished name of the contact can be specified with or without
       the domainDN component.

       --editor=EDITOR
           Specifies the editor to use instead of the system default, or 'vi' if no system
           default is set.

   contact list [options]
       List all contacts.

       --full-dn
           Display contact's full DN instead of the name.

   contact move contactname new_parent_dn [options]
       This command moves a contact into the specified organizational unit or container.

       The contactname specified on the command is the common name or the distinguished name of
       the contact object. The distinguished name of the contact can be specified with or without
       the domainDN component.

   contact show contactname [options]
       Display a contact AD object.

       The contactname specified on the command is the common name or the distinguished name of
       the contact object. The distinguished name of the contact can be specified with or without
       the domainDN component.

       --attributes=CONTACT_ATTRS
           Comma separated list of attributes, which will be printed.

   contact rename contactname [options]
       Rename a contact and related attributes.

       This command allows to set the contact's name related attributes. The contact's CN will be
       renamed automatically. The contact's new CN will be made up by combining the given-name,
       initials and surname. A dot ('.') will be appended to the initials automatically, if
       required. Use the --force-new-cn option to specify the new CN manually and --reset-cn to
       reset this change.

       Use an empty attribute value to remove the specified attribute.

       The contact name specified on the command is the CN.

       --surname=SURNAME
           New surname.

       --given-name=GIVEN_NAME
           New given name.

       --initials=INITIALS
           New initials.

       --force-new-cn=NEW_CN
           Specify a new CN (RDN) instead of using a combination of the given name, initials and
           surname.

       --reset-cn
           Set the CN to the default combination of given name, initials and surname.

       --display-name=DISPLAY_NAME
           New display name.

       --mail-address=MAIL_ADDRESS
           New email address.

   dbcheck
       Check the local AD database for errors.

   delegation
       Manage Delegations.

   delegation add-service accountname principal [options]
       Add a service principal as msDS-AllowedToDelegateTo.

   delegation del-service accountname principal [options]
       Delete a service principal as msDS-AllowedToDelegateTo.

   delegation for-any-protocol accountname [(on|off)] [options]
       Set/unset UF_TRUSTED_TO_AUTHENTICATE_FOR_DELEGATION (S4U2Proxy) for an account.

   delegation for-any-service accountname [(on|off)] [options]
       Set/unset UF_TRUSTED_FOR_DELEGATION for an account.

   delegation show accountname [options]
       Show the delegation setting of an account.

   dns
       Manage Domain Name Service (DNS).

   dns add server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT data
       Add a DNS record.

   dns delete server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT data
       Delete a DNS record.

   dns query server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT|ALL [options] data
       Query a name.

   dns roothints server [name] [options]
       Query root hints.

   dns serverinfo server [options]
       Query server information.

   dns update server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT olddata newdata
       Update a DNS record.

   dns zonecreate server zone [options]
       Create a zone.

   dns zonedelete server zone [options]
       Delete a zone.

   dns zoneinfo server zone [options]
       Query zone information.

   dns zonelist server [options]
       List zones.

   domain
       Manage Domain.

   domain backup
       Create or restore a backup of the domain.

   domain backup offline
       Backup (with proper locking) local domain directories into a tar file.

   domain backup online
       Copy a running DC's current DB into a backup tar file.

   domain backup rename
       Copy a running DC's DB to backup file, renaming the domain in the process.

   domain backup restore
       Restore the domain's DB from a backup-file.

   domain classicupgrade [options] classic_smb_conf
       Upgrade from Samba classic (NT4-like) database to Samba AD DC database.

   domain dcpromo dnsdomain [DC|RODC] [options]
       Promote an existing domain member or NT4 PDC to an AD DC.

   domain demote
       Demote ourselves from the role of domain controller.

   domain exportkeytab keytab [options]
       Dumps Kerberos keys of the domain into a keytab.

   domain info ip_address [options]
       Print basic info about a domain and the specified DC.

   domain join dnsdomain [DC|RODC|MEMBER|SUBDOMAIN] [options]
       Join a domain as either member or backup domain controller.

   domain level show|raise options [options]
       Show/raise domain and forest function levels.

   domain passwordsettings show|set options [options]
       Show/set password settings.

   domain passwordsettings pso
       Manage fine-grained Password Settings Objects (PSOs).

   domain passwordsettings pso apply pso-name user-or-group-name [options]
       Applies a PSO's password policy to a user or group.

   domain passwordsettings pso create pso-name precedence [options]
       Creates a new Password Settings Object (PSO).

   domain passwordsettings pso delete pso-name [options]
       Deletes a Password Settings Object (PSO).

   domain passwordsettings pso list [options]
       Lists all Password Settings Objects (PSOs).

   domain passwordsettings pso set pso-name [options]
       Modifies a Password Settings Object (PSO).

   domain passwordsettings pso show user-name [options]
       Displays a Password Settings Object (PSO).

   domain passwordsettings pso show-user pso-name [options]
       Displays the Password Settings that apply to a user.

   domain passwordsettings pso unapply pso-name user-or-group-name [options]
       Updates a PSO to no longer apply to a user or group.

   domain provision
       Promote an existing domain member or NT4 PDC to an AD DC.

   domain trust
       Domain and forest trust management.

   domain trust create DOMAIN options [options]
       Create a domain or forest trust.

   domain trust modify DOMAIN options [options]
       Modify a domain or forest trust.

   domain trust delete DOMAIN options [options]
       Delete a domain trust.

   domain trust list options [options]
       List domain trusts.

   domain trust namespaces [DOMAIN] options [options]
       Manage forest trust namespaces.

   domain trust show DOMAIN options [options]
       Show trusted domain details.

   domain trust validate DOMAIN options [options]
       Validate a domain trust.

   drs
       Manage Directory Replication Services (DRS).

   drs bind
       Show DRS capabilities of a server.

   drs kcc
       Trigger knowledge consistency center run.

   drs options
       Query or change options for NTDS Settings object of a domain controller.

   drs replicate destination_DC source_DC NC [options]
       Replicate a naming context between two DCs.

   drs showrepl
       Show replication status. The [--json] option results in JSON output, and with the
       [--summary] option produces very little output when the replication status seems healthy.

   dsacl
       Administer DS ACLs

   dsacl set
       Modify access list on a directory object.

   forest
       Manage Forest configuration.

   forest directory_service
       Manage directory_service behaviour for the forest.

   forest directory_service dsheuristics VALUE
       Modify dsheuristics directory_service configuration for the forest.

   forest directory_service show
       Show current directory_service configuration for the forest.

   fsmo
       Manage Flexible Single Master Operations (FSMO).

   fsmo seize [options]
       Seize the role.

   fsmo show
       Show the roles.

   fsmo transfer [options]
       Transfer the role.

   gpo
       Manage Group Policy Objects (GPO).

   gpo create displayname [options]
       Create an empty GPO.

   gpo del gpo [options]
       Delete GPO.

   gpo dellink container_dn gpo [options]
       Delete GPO link from a container.

   gpo fetch gpo [options]
       Download a GPO.

   gpo getinheritance container_dn [options]
       Get inheritance flag for a container.

   gpo getlink container_dn [options]
       List GPO Links for a container.

   gpo list username [options]
       List GPOs for an account.

   gpo listall
       List all GPOs.

   gpo listcontainers gpo [options]
       List all linked containers for a GPO.

   gpo setinheritance container_dn block|inherit [options]
       Set inheritance flag on a container.

   gpo setlink container_dn gpo [options]
       Add or Update a GPO link to a container.

   gpo show gpo [options]
       Show information for a GPO.

   gpo manage symlink list
       List VGP Symbolic Link Group Policy from the sysvol

   gpo manage symlink add
       Adds a VGP Symbolic Link Group Policy to the sysvol

   gpo manage symlink remove
       Removes a VGP Symbolic Link Group Policy from the sysvol

   gpo manage files list
       List VGP Files Group Policy from the sysvol

   gpo manage files add
       Add VGP Files Group Policy to the sysvol

   gpo manage files remove
       Remove VGP Files Group Policy from the sysvol

   gpo manage openssh list
       List VGP OpenSSH Group Policy from the sysvol

   gpo manage openssh set
       Sets a VGP OpenSSH Group Policy to the sysvol

   gpo manage sudoers add
       Adds a Samba Sudoers Group Policy to the sysvol.

   gpo manage sudoers list
       List Samba Sudoers Group Policy from the sysvol.

   gpo manage sudoers remove
       Removes a Samba Sudoers Group Policy from the sysvol.

   gpo manage scripts startup list
       List VGP Startup Script Group Policy from the sysvol

   gpo manage scripts startup add
       Adds VGP Startup Script Group Policy to the sysvol

   gpo manage scripts startup remove
       Removes VGP Startup Script Group Policy from the sysvol

   gpo manage motd list
       List VGP MOTD Group Policy from the sysvol.

   gpo manage motd set
       Sets a VGP MOTD Group Policy to the sysvol

   gpo manage issue list
       List VGP Issue Group Policy from the sysvol.

   gpo manage issue set
       Sets a VGP Issue Group Policy to the sysvol

   gpo manage access add
       Adds a VGP Host Access Group Policy to the sysvol

   gpo manage access list
       List VGP Host Access Group Policy from the sysvol

   gpo manage access remove
       Remove a VGP Host Access Group Policy from the sysvol

   group
       Manage groups.

   group add groupname [options]
       Create a new AD group.

   group create groupname [options]
       Add a new AD group. This is a synonym for the samba-tool group add command and is
       available for compatibility reasons only. Please use samba-tool group add instead.

   group addmembers groupname members [options]
       Add members to an AD group.

   group delete groupname [options]
       Delete an AD group.

   group edit groupname
       Edit a group AD object.

       --editor=EDITOR
           Specifies the editor to use instead of the system default, or 'vi' if no system
           default is set.

   group list
       List all groups.

   group listmembers groupname [options]
       List all members of the specified AD group.

       By default the sAMAccountNames are listed. If no sAMAccountName is available, the CN will
       be used instead.

       --full-dn
           List the distinguished names instead of the sAMAccountNames.

       --hide-expired
           Do not list expired group members.

       --hide-disabled
           Do not list disabled group members.

   group move groupname new_parent_dn [options]
       This command moves a group into the specified organizational unit or container.

       The groupname specified on the command is the sAMAccountName.

       The name of the organizational unit or container can be specified as a full DN or without
       the domainDN component.

   group removemembers groupname members [options]
       Remove members from the specified AD group.

   group show groupname [options]
       Show group object and it's attributes.

   group stats [options]
       Show statistics for overall groups and group memberships.

   group rename groupname [options]
       Rename a group and related attributes.

       This command allows to set the group's name related attributes. The group's CN will be
       renamed automatically. The group's CN will be the sAMAccountName. Use the --force-new-cn
       option to specify the new CN manually and the --reset-cn to reset this change.

       Use an empty attribute value to remove the specified attribute.

       The groupname specified on the command is the sAMAccountName.

       --force-new-cn=NEW_CN
           Specify a new CN (RDN) instead of using the sAMAccountName.

       --reset-cn
           Set the CN to the sAMAccountName.

       --mail-address=MAIL_ADDRESS
           New mail address

       --samaccountname=SAMACCOUNTNAME
           New account name (sAMAccountName/logon name)

   ldapcmp URL1 URL2 domain|configuration|schema|dnsdomain|dnsforest [options]
       Compare two LDAP databases.

   ntacl
       Manage NT ACLs.

   ntacl changedomsid original-domain-SID new-domain-SID file [options]
       Change the domain SID for ACLs. Can be used to change all entries in acl_xattr when the
       machine's SID has accidentally changed or the data set has been copied to another machine
       either via backup/restore or rsync.

       --use-ntvfs
           Set the ACLs directly to the TDB or xattr. The POSIX permissions will NOT be changed,
           only the NT ACL will be stored.

       --service=SERVICE
           Specify the name of the smb.conf service to use. This option is required in
           combination with the --use-s3fs option.

       --use-s3fs
           Set the ACLs for use with the default s3fs file server via the VFS layer. This option
           requires a smb.conf service, specified by the --service=SERVICE option.

       --xattr-backend=[native|tdb]
           Specify the xattr backend type (native fs or tdb).

       --eadb-file=EADB_FILE
           Name of the tdb file where attributes are stored.

       --recursive
           Set the ACLs for directories and their contents recursively.

       --follow-symlinks
           Follow symlinks when --recursive is specified.

       --verbose
           Verbosely list files and ACLs which are being processed.

   ntacl get file [options]
       Get ACLs on a file.

   ntacl set acl file [options]
       Set ACLs on a file.

   ntacl sysvolcheck
       Check sysvol ACLs match defaults (including correct ACLs on GPOs).

   ntacl sysvolreset
       Reset sysvol ACLs to defaults (including correct ACLs on GPOs).

   ou
       Manage organizational units (OUs).

   ou add ou_dn [options]
       Add a new organizational unit.

       The name of the organizational unit can be specified as a full DN or without the domainDN
       component.

       --description=DESCRIPTION
           Specify OU's description.

   ou create ou_dn [options]
       Add a new organizational unit. This is a synonym for the samba-tool ou add command and is
       available for compatibility reasons only. Please use samba-tool ou add instead.

   ou delete ou_dn [options]
       Delete an organizational unit.

       The name of the organizational unit can be specified as a full DN or without the domainDN
       component.

       --force-subtree-delete
           Delete organizational unit and all children reclusively.

   ou list [options]
       List all organizational units.

       --full-dn
           Display DNs including the base DN.

   ou listobjects ou_dn [options]
       List all objects in an organizational unit.

       The name of the organizational unit can be specified as a full DN or without the domainDN
       component.

       --full-dn
           Display DNs including the base DN.

       -r|--recursive
           List objects recursively.

   ou move old_ou_dn new_parent_dn [options]
       Move an organizational unit.

       The name of the organizational units can be specified as a full DN or without the domainDN
       component.

   ou rename old_ou_dn new_ou_dn [options]
       Rename an organizational unit.

       The name of the organizational units can be specified as a full DN or without the domainDN
       component.

   rodc
       Manage Read-Only Domain Controller (RODC).

   rodc preload SID|DN|accountname [options]
       Preload one account for an RODC.

   schema
       Manage and query schema.

   schema attribute modify attribute [options]
       Modify the behaviour of an attribute in schema.

   schema attribute show attribute [options]
       Display an attribute schema definition.

   schema attribute show_oc attribute [options]
       Show objectclasses that MAY or MUST contain this attribute.

   schema objectclass show objectclass [options]
       Display an objectclass schema definition.

   sites
       Manage sites.

   sites create site [options]
       Create a new site.

   sites remove site [options]
       Delete an existing site.

   spn
       Manage Service Principal Names (SPN).

   spn add name user [options]
       Create a new SPN.

   spn delete name [user] [options]
       Delete an existing SPN.

   spn list user [options]
       List SPNs of a given user.

   testparm
       Check the syntax of the configuration file.

   time
       Retrieve the time on a server.

   user
       Manage users.

   user add username [password]
       Add a new user to the Active Directory Domain.

   user create username [password]
       Add a new user. This is a synonym for the samba-tool user add command and is available for
       compatibility reasons only. Please use samba-tool user add instead.

   user delete username [options]
       Delete an existing user account.

   user disable username
       Disable a user account.

   user edit username
       Edit a user account AD object.

       --editor=EDITOR
           Specifies the editor to use instead of the system default, or 'vi' if no system
           default is set.

   user enable username
       Enable a user account.

   user list
       List all users.

       By default the user's sAMAccountNames are listed.

       --full-dn
           List user's distinguished names instead of the sAMAccountNames.

       -b BASE_DN|--base-dn=BASE_DN
           Specify base DN to use. Only users under the specified base DN will be listed.

       --hide-expired
           Do not list expired user accounts.

       --hide-disabled
           Do not list disabled user accounts.

   user setprimarygroup username primarygroupname
       Set the primary group a user account.

   user getgroups username
       Get the direct group memberships of a user account.

   user show username [options]
       Display a user AD object.

       --attributes=USER_ATTRS
           Comma separated list of attributes, which will be printed.

   user move username new_parent_dn [options]
       This command moves a user account into the specified organizational unit or container.

       The username specified on the command is the sAMAccountName.

       The name of the organizational unit or container can be specified as a full DN or without
       the domainDN component.

   user password [options]
       Change password for a user account (the one provided in authentication).

   user rename username [options]
       Rename a user and related attributes.

       This command allows to set the user's name related attributes. The user's CN will be
       renamed automatically. The user's new CN will be made up by combining the given-name,
       initials and surname. A dot ('.') will be appended to the initials automatically, if
       required. Use the --force-new-cn option to specify the new CN manually and --reset-cn to
       reset this change.

       Use an empty attribute value to remove the specified attribute.

       The username specified on the command is the sAMAccountName.

       --surname=SURNAME
           New surname

       --given-name=GIVEN_NAME
           New given name

       --initials=INITIALS
           New initials

       --force-new-cn=NEW_CN
           Specify a new CN (RDN) instead of using a combination of the given name, initials and
           surname.

       --reset-cn
           Set the CN to the default combination of given name, initials and surname.

       --display-name=DISPLAY_NAME
           New display name

       --mail-address=MAIL_ADDRESS
           New email address

       --samaccountname=SAMACCOUNTNAME
           New account name (sAMAccountName/logon name)

       --upn=UPN
           New user principal name

   user setexpiry username [options]
       Set the expiration of a user account.

   user setpassword username [options]
       Sets or resets the password of a user account.

   user unlock username [options]
       This command unlocks a user account in the Active Directory domain.

   user getpassword username [options]
       Gets the password of a user account.

   user syncpasswords --cache-ldb-initialize [options]
       Syncs the passwords of all user accounts, using an optional script.

       Note that this command should run on a single domain controller only (typically the
       PDC-emulator).

   vampire [options] domain
       Join and synchronise a remote AD domain to the local server. Please note that samba-tool
       vampire is deprecated, please use samba-tool domain join instead.

   visualize [options] subcommand
       Produce graphical representations of Samba network state. To work out what is happening in
       a replication graph, it is sometimes helpful to use visualisations.

       There are two subcommands, two graphical modes, and (roughly) two modes of operation with
       respect to the location of authority.

   MODES OF OPERATION
       samba-tool visualize ntdsconn
           Looks at NTDS connections.

       samba-tool visualize reps
           Looks at repsTo and repsFrom objects.

       samba-tool visualize uptodateness
           Looks at replication lag as shown by the uptodateness vectors.

   GRAPHICAL MODES
       --distance
           Distances between DCs are shown in a matrix in the terminal.

       --dot
           Generate Graphviz dot output (for ntdsconn and reps modes). When viewed using dot or
           xdot, this shows the network as a graph with DCs as vertices and connections edges.
           Certain types of degenerate edges are shown in different colours or line-styles.

       --xdot
           Generate Graphviz dot output as with [--dot] and attempt to view it immediately using
           /usr/bin/xdot.

       -r
           Normally, samba-tool talks to one database; with the [-r] option attempts are made to
           contact all the DCs known to the first database. This is necessary for samba-tool
           visualize uptodateness and for samba-tool visualize reps because the repsFrom/To
           objects are not replicated, and it can reveal replication issues in other modes.

   help
       Gives usage information.

VERSION

       This man page is complete for version 4.15.13-Ubuntu of the Samba suite.

AUTHOR

       The original Samba software and related utilities were created by Andrew Tridgell. Samba
       is now developed by the Samba Team as an Open Source project similar to the way the Linux
       kernel is developed.