Provided by: ipmctl_03.00.00.0423-1_amd64 bug

NAME

       ipmctl-set-sensor - Sets the threshold or enabled state for PMem modules sensors

SYNOPSIS

           ipmctl set [OPTIONS] -sensor (SENSORS) [TARGETS]
           AlarmThreshold=(temperature) AlarmEnabled=(0|1)

DESCRIPTION

       Changes the alarm threshold or enabled state for one or more PMem modules sensors. Use the
       command Show Sensor to view the current settings.

OPTIONS

       -f, -force
           Changing the sensor settings is a potentially destructive operation which requires
           confirmation from the user for each PMem module. This option suppresses the
           confirmation.

       -h, -help
           Displays help for the command.

       -ddrt
           Used to specify DDRT as the desired transport protocol for the current invocation of
           ipmctl.

       -smbus
           Used to specify SMBUS as the desired transport protocol for the current invocation of
           ipmctl.

           Note
           The -ddrt and -smbus options are mutually exclusive and may not be used together.

       -o (text|nvmxml), -output (text|nvmxml)
           Changes the output format. One of: "text" (default) or "nvmxml".

SENSORS

       MediaTemperature
           The PMem module media temperature in Celsius.

       ControllerTemperature
           The PMem module controller temperature in Celsius.

       PercentageRemaining
           Remaining PMem module’s life as a percentage value of factory expected life span.

TARGETS

       -dimm [DimmIDs]
           Update specified sensors on specific PMem modules by optionally supplying the PMem
           module target and one or more comma separated PMem module identifiers. The default is
           to update the specified sensors for all manageable PMem modules.

PROPERTIES

       AlarmThreshold
           The threshold value at which an alarm for the respective sensor will be triggered. The
           upper (for temperatures) or lower (for percentage remaining) alarm threshold of the
           sensor. Temperatures may be specified to a precision of 1 degree Celsius.

           Table 1. Allowed AlarmThreshold
           ┌──────────────────────┬────────────────────────┬─────────┐
           │                      │                        │         │
           │Sensor                │ Allowed AlarmThreshold │ Units   │
           │                      │ values                 │         │
           ├──────────────────────┼────────────────────────┼─────────┤
           │                      │                        │         │
           │MediaTemperature      │ 0-85                   │ Celsius │
           ├──────────────────────┼────────────────────────┼─────────┤
           │                      │                        │         │
           │ControllerTemperature │ 0-102                  │ Celsius │
           ├──────────────────────┼────────────────────────┼─────────┤
           │                      │                        │         │
           │PercentageRemaining   │ 1-99                   │ %       │
           └──────────────────────┴────────────────────────┴─────────┘

       AlarmEnabled
           Enable or disable the alarm threshold, where applicable. One of:

           •   "0": Disable

           •   "1": Enable

EXAMPLES

       Changes the media temperature alarm threshold to 51C on the specified PMem module and
       enables the alarm.

           ipmctl set -sensor MediaTemperature -dimm 0x0001 AlarmThreshold=51 AlarmEnabled=1

LIMITATIONS

       In order to successfully execute this command:

       •   The caller must have the appropriate privileges.

       •   The specified PMem modules must be manageable by the host software.

RETURN DATA

       For each PMem module, the CLI will indicate the status of the operation. If a failure
       occurs when modifying multiple PMem modules, the process will exit and not continue
       modifying the remaining PMem modules.

SAMPLE OUTPUT

           Modify (Sensor) settings on DIMM (DimmID): Success

           Modify (Sensor) settings on DIMM (DimmID): Error (Code) -
           (Description)