Provided by: fence-agents-extra_4.7.1-1ubuntu8.1_amd64 bug

NAME

       fence_gce - Fence agent for GCE (Google Cloud Engine)

DESCRIPTION

       fence_gce   is  an  I/O  Fencing  agent  for  GCE  (Google  Cloud  Engine).  It  uses  the
       googleapiclient library to connect to GCE.  googleapiclient can be configured with  Google
       SDK  CLI  or  by executing 'gcloud auth application-default login'.  For instructions see:
       https://cloud.google.com/compute/docs/tutorials/python-guide

       fence_gce accepts options on the  command  line  as  well  as  from  stdin.  Fenced  sends
       parameters  through  stdin  when  it  execs the agent. fence_gce can be run by itself with
       command line options.  This is useful for testing and for turning outlets on or  off  from
       scripts.

       Vendor URL: http://cloud.google.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -m, --method=[method]
              Method to fence (onoff|cycle) (Default Value: onoff)

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       --zone=[name]
              Zone.

       --project=[name]
              Project ID.

       --stackdriver-logging
              Stackdriver-logging support.

       --baremetalsolution
              If enabled this is a bare metal offering from google.

       --apitimeout=[seconds]
              Timeout in seconds to use for API calls, default is 60. (Default Value: 60)

       --retries=[retries]
              Number of retries on failure for API calls, default is 3. (Default Value: 3)

       --retrysleep=[seconds]
              Time to sleep in seconds between API retries, default  is  5.  (Default  Value:  5)

       --serviceaccount=[filename]
              Service Account to use for authentication to the google cloud APIs.

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       --verbose-level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 60)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if it  can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       method Method to fence (onoff|cycle) (Default Value: onoff)

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       zone   Zone.

       project
              Project ID.

       stackdriver_logging
              Stackdriver-logging support. Obsoletes: stackdriver-logging

       baremetalsolution
              If enabled this is a bare metal offering from google.

       apitimeout
              Timeout in seconds to use for API calls, default is 60. (Default Value: 60)

       retries
              Number of retries on failure for API calls, default is 3. (Default Value: 3)

       retrysleep
              Time to sleep in seconds between API retries, default  is  5.  (Default  Value:  5)

       serviceaccount
              Service Account to use for authentication to the google cloud APIs.

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       verbose_level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 60)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)