Provided by: fence-agents-base_4.7.1-1ubuntu8.1_all bug

NAME

       fence_mpath - Fence agent for multipath persistent reservation

DESCRIPTION

       fence_mpath  is  an  I/O fencing agent that uses SCSI-3 persistent reservations to control
       access multipath devices. Underlying devices must support SCSI-3  persistent  reservations
       (SPC-3  or  greater) as well as the "preempt-and-abort" subcommand.  The fence_mpath agent
       works by having a unique key for each node that has to be set in /etc/multipath.conf. Once
       registered,  a  single  node  will  become  the  reservation  holder  by creating a "write
       exclusive, registrants only" reservation  on  the  device(s).  The  result  is  that  only
       registered  nodes  may write to the device(s). When a node failure occurs, the fence_mpath
       agent will remove the key belonging to the failed node from the device(s). The failed node
       will no longer be able to write to the device(s). A manual reboot is required.

       fence_mpath  accepts  options  on  the  command  line  as well as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_mpath can be run  by  itself  with
       command  line  options.  This is useful for testing and for turning outlets on or off from
       scripts.

       Vendor URL: https://www.sourceware.org/dm/

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: off)

       -d, --devices=[devices]
              List of devices to use for current operation. Devices can be  comma-separated  list
              of            device-mapper            multipath            devices            (eg.
              /dev/mapper/3600508b400105df70000e00000ac0000 or /dev/mapper/mpath1).  Each  device
              must support SCSI-3 persistent reservations.

       -k, --key=[key]
              Replaced by port/-n/--plug

       -n, --plug=[key]
              Key  to use for the current operation. This key should be unique to a node and have
              to be written in /etc/multipath.conf. For the "on" action, the  key  specifies  the
              key  use  to  register the local node. For the "off" action, this key specifies the
              key to be removed from the device(s).

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug-file or logging  to
              syslog.

       -v, --verbose
              Verbose  mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
              increase verbosity.

       --verbose-level
              Level of debugging detail in output. Defaults to  the  number  of  --verbose  flags
              specified  on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --mpathpersist-path=[path]
              Path to mpathpersist binary (Default Value: /usr/sbin/mpathpersist)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --store-path=[path]
              Path  to  directory  where  fence  agent  can  store  information  (Default  Value:
              /var/run/cluster)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --use-sudo
              Use sudo (without password) when calling 3rd party software

       --sudo-path=[path]
              Path to sudo binary (Default Value: /usr/bin/sudo)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: off)

       devices
              List  of  devices to use for current operation. Devices can be comma-separated list
              of            device-mapper            multipath            devices            (eg.
              /dev/mapper/3600508b400105df70000e00000ac0000  or  /dev/mapper/mpath1). Each device
              must support SCSI-3 persistent reservations.

       key    Replaced by port/-n/--plug

       plug   Key to use for the current operation. This key should be unique to a node and  have
              to  be  written  in /etc/multipath.conf. For the "on" action, the key specifies the
              key use to register the local node. For the "off" action, this  key  specifies  the
              key to be removed from the device(s). Obsoletes: port

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       verbose_level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       mpathpersist_path
              Path to mpathpersist binary (Default Value: /usr/sbin/mpathpersist)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       store_path
              Path  to  directory  where  fence  agent  can  store  information  (Default  Value:
              /var/run/cluster)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       use_sudo
              Use sudo (without password) when calling 3rd party software Obsoletes: sudo

       sudo_path
              Path to sudo binary (Default Value: /usr/bin/sudo)