Provided by: dpkg_1.14.24ubuntu1_i386 bug

NAME

       dpkg - package manager for Debian

SYNOPSIS

       dpkg [options] action

WARNING

       This  manual is intended for users wishing to understand dpkg’s command
       line options and package states in more detail than  that  provided  by
       dpkg --help.

       It  should not be used by package maintainers wishing to understand how
       dpkg will install their packages. The descriptions of  what  dpkg  does
       when installing and removing packages are particularly inadequate.

DESCRIPTION

       dpkg  is  a  tool to install, build, remove and manage Debian packages.
       The primary and more user-friendly front-end for dpkg  is  aptitude(1).
       dpkg  itself  is controlled entirely via command line parameters, which
       consist of exactly one action and zero or  more  options.  The  action-
       parameter tells dpkg what to do and options control the behavior of the
       action in some way.

       dpkg can be also be used as a front-end to dpkg-deb(1).  The  following
       are  dpkg-deb  actions,  and  if  they  are encountered, dpkg just runs
       dpkg-deb with the parameters given to it:
           -b, --build,
           -c, --contents,
           -I, --info,
           -f, --field,
           -e, --control,
           -x, --extract,
           -X, --vextract, and
           --fsys-tarfile.
       Please refer to dpkg-deb(1) for information about these actions.

INFORMATION ABOUT PACKAGES

       dpkg maintains some usable information about  available  packages.  The
       information  is  divided in three classes: states, selection states and
       flags. These values are intended to be changed mainly with dselect.

   PACKAGE STATES
       not-installed
              The package is not installed on your system.

       config-files
              Only the configuration files of the package exist on the system.

       half-installed
              The  installation  of  the  package  has  been  started, but not
              completed for some reason.

       unpacked
              The package is unpacked, but not configured.

       half-configured
              The package is unpacked and configuration has been started,  but
              not yet completed for some reason.

       triggers-awaited
              The package awaits trigger processing by another package.

       triggers-pending
              The package has been triggered.

       installed
              The package is unpacked and configured OK.

   PACKAGE SELECTION STATES
       install
              The package is selected for installation.

       deinstall
              The  package  is  selected  for  deinstallation (i.e. we want to
              remove all files, except configuration files).

       purge  The package is selected to be purged (i.e.  we  want  to  remove
              everything, even configuration files).

   PACKAGE FLAGS
       hold   A  package  marked  to be on hold is not handled by dpkg, unless
              forced to do that with option --force-hold.

       reinst-required
              A  package  marked  reinst-required  is  broken   and   requires
              reinstallation.  These packages cannot be removed, unless forced
              with option --force-remove-reinstreq.

ACTIONS

       -i, --install package_file...
              Install the package. If --recursive or -R option  is  specified,
              package_file must refer to a directory instead.

              Installation consists of the following steps:

              1. Extract the control files of the new package.

              2.  If  another version of the same package was installed before
              the new installation, execute prerm script of the old package.

              3. Run preinst script, if provided by the package.

              4. Unpack the new files, and at the same time back  up  the  old
              files, so that if something goes wrong, they can be restored.

              5.  If  another version of the same package was installed before
              the new installation, execute  the  postrm  script  of  the  old
              package.  Note  that  this  script is executed after the preinst
              script of the new package, because new files are written at  the
              same time old files are removed.

              6.   Configure   the   package.  See  --configure  for  detailed
              information about how this is done.

       --unpack package_file...
              Unpack the package, but don’t configure it. If --recursive or -R
              option  is  specified,  package_file  must  refer to a directory
              instead.

       --configure package...|-a|--pending
              Reconfigure an unpacked package. If -a  or  --pending  is  given
              instead  of  package, all unpacked but unconfigured packages are
              configured.

              Configuring consists of the following steps:

              1. Unpack the configuration files, and at the same time back  up
              the  old  configuration  files,  so that they can be restored if
              something goes wrong.

              2. Run postinst script, if provided by the package.

       --triggers-only package...|-a|--pending
              Processes only triggers. All pending triggers will be processed.
              If package names are supplied only those packages’ triggers will
              be processed, exactly once each where  necessary.  Use  of  this
              option  may  leave packages in the improper triggers-awaited and
              triggers-pending states. This can be  fixed  later  by  running:
              dpkg --configure --pending.

       -r, --remove, -P, --purge package...|-a|--pending
              Remove  an  installed  package. -r or --remove remove everything
              except configuration files. This may avoid having to reconfigure
              the package if it is reinstalled later. (Configuration files are
              the files listed in the debian/conffiles control  file).  -P  or
              --purge removes everything, including configuration files. If -a
              or --pending is given  instead  of  a  package  name,  then  all
              packages  unpacked,  but  marked to be removed or purged in file
              /var/lib/dpkg/status, are removed or purged, respectively.

              Removing of a package consists of the following steps:

              1. Run prerm script

              2. Remove the installed files

              3. Run postrm script

       --update-avail, --merge-avail Packages-file
              Update  dpkg’s  and  dselect’s  idea  of  which   packages   are
              available.   With   action  --merge-avail,  old  information  is
              combined  with  information  from  Packages-file.  With   action
              --update-avail, old information is replaced with the information
              in the Packages-file. The Packages-file distributed with  Debian
              is  simply  named  Packages.  dpkg keeps its record of available
              packages in /var/lib/dpkg/available.

              A simpler one-shot command to retrieve and update the  available
              file is dselect update.

       -A, --record-avail package_file...
              Update  dpkg  and dselect’s idea of which packages are available
              with information from the package package_file.  If  --recursive
              or  -R  option  is  specified,  package_file  must  refer  to  a
              directory instead.

       --forget-old-unavail
              Forget about uninstalled unavailable packages.

       --clear-avail
              Erase  the  existing  information  about   what   packages   are
              available.

        -C, --audit
              Searches for packages that have been installed only partially on
              your system. dpkg will suggest what to do with them to get  them
              working.

       --get-selections [package-name-pattern...]
              Get  list of package selections, and write it to stdout. Without
              a pattern, packages marked with state purge will not be shown.

       --set-selections
              Set package selections using file read  from  stdin.  This  file
              should  be in the format ’<package> <state>’, where state is one
              of install, hold, deinstall or purge. Blank  lines  and  comment
              lines beginning with ’#’ are also permitted.

       --clear-selections
              Set  the  requested  state  of  every  non-essential  package to
              deinstall.  This is  intended  to  be  used  immediately  before
              --set-selections, to deinstall any packages not in list given to
              --set-selections.

       --yet-to-unpack
              Searches for packages selected for installation, but  which  for
              some reason still haven’t been installed.

       --print-architecture
              Print   architecture   of  packages  dpkg  installs  (for
              example, "i386").

       --compare-versions ver1 op ver2
              Compare version numbers, where op is a  binary  operator.
              dpkg  returns  success  (zero  result)  if  the specified
              condition is  satisfied,  and  failure  (nonzero  result)
              otherwise.  There  are  two  groups  of  operators, which
              differ in how they treat an empty  ver1  or  ver2.  These
              treat an empty version as earlier than any version: lt le
              eq ne ge gt. These treat an empty version as  later  than
              any  version: lt-nl le-nl ge-nl gt-nl. These are provided
              only for compatibility with control file syntax: < <<  <=
              = >= >> >.

       --command-fd <n>
              Accept a series of commands on input file descriptor <n>.
              Note: additional options set on  the  command  line,  and
              thru  this  file descriptor, are not reset for subsequent
              commands executed during the same run.

       --help Display a brief help message.

       --force-help
              Give help about the --force-thing options.

       -Dh, --debug=help
              Give help about debugging options.

       --licence, --license
              Display dpkg licence.

       --version
              Display dpkg version information.

       dpkg-deb actions
              See dpkg-deb(1) for more information about the  following
              actions.

              -b, --build directory [archive|directory]
                  Build a deb package.
              -c, --contents archive
                  List contents of a deb package.
              -e, --control filename [directory]
                  Extract control-information from a package.
              -x, --extract archive directory
                  Extract the files contained by package.
              -X, --vextract archive directory
                  Extract and display the filenames contained by a
                  package.
              -f, --field  archive [control-field...]
                  Display control field(s) of a package.
              --fsys-tarfile archive
                  Display the filesystem tar-file contained by a
                  Debian package.
              -I, --info archive [control-file...]
                  Show information about a package.

       dpkg-query actions
              See   dpkg-query(1)   for   more  information  about  the
              following actions.

              -l, --list package-name-pattern...
                  List packages matching given pattern.
              -s, --status package-name...
                  Report status of specified package.
              -L, --listfiles package-name...
                  List files installed to your system from package-name.
              -S, --search filename-search-pattern...
                  Search for a filename from installed packages.
              -p, --print-avail package-name...
                  Display details about package-name, as found in
                  /var/lib/dpkg/available.

OPTIONS

       All options can be specified both on the command line and in the
       dpkg  configuration  file  /etc/dpkg/dpkg.cfg.  Each line in the
       configuration file is either an option (exactly the same as  the
       command line option but without leading dashes) or a comment (if
       it starts with a #).

       --abort-after=number
              Change after how many errors dpkg will abort. The default
              is 50.

       -B, --auto-deconfigure
              When  a  package  is removed, there is a possibility that
              another  installed  package  depended  on   the   removed
              package.  Specifying  this  option  will  cause automatic
              deconfiguration of the  package  which  depended  on  the
              removed package.

       -Doctal, --debug=octal
              Switch  debugging  on.  octal is formed by bitwise-orring
              desired values together from the list  below  (note  that
              these  values  may  change  in  future  releases). -Dh or
              --debug=help display these debugging values.

                  number  description
                       1   Generally helpful progress information
                       2   Invocation and status of maintainer scripts
                      10   Output for each file processed
                     100   Lots of output for each file processed
                      20   Output for each configuration file
                     200   Lots of output for each configuration file
                      40   Dependencies and conflicts
                     400   Lots of dependencies/conflicts output
                   10000   Trigger activation and processing
                   20000   Lots of output regarding triggers
                   40000   Silly amounts of output regarding triggers
                    1000   Lots of drivel about e.g. the dpkg/info dir
                    2000   Insane amounts of drivel

       --force-things, --no-force-things, --refuse-things

              Force or refuse (no-force and refuse mean the same thing)
              to  do  some  things. things is a comma separated list of
              things specified below. --force-help displays  a  message
              describing  them.   Things  marked with (*) are forced by
              default.

              Warning: These options are mostly intended to be used  by
              experts  only.  Using  them  without  fully understanding
              their effects may break your whole system.

              all: Turns on (or off) all force options.

              downgrade(*): Install a package, even if newer version of
              it is already installed.

              Warning:  At  present  dpkg  does  not  do any dependency
              checking on downgrades and therefore will not warn you if
              the   downgrade  breaks  the  dependency  of  some  other
              package. This can have serious side effects,  downgrading
              essential  system  components  can  even  make your whole
              system unusable. Use with care.

              configure-any:   Configure   also   any   unpacked    but
              unconfigured   packages  on  which  the  current  package
              depends.

              hold: Process packages even when marked "hold".

              remove-reinstreq: Remove a package, even if  it’s  broken
              and  marked  to  require  reinstallation.  This  may, for
              example, cause parts of the  package  to  remain  on  the
              system, which will then be forgotten by dpkg.

              remove-essential:   Remove,   even   if  the  package  is
              considered essential. Essential packages  contain  mostly
              very  basic  Unix commands. Removing them might cause the
              whole system to stop working, so use with caution.

              depends: Turn all dependency problems into warnings.

              depends-version: Don’t care about versions when  checking
              dependencies.

              breaks:   Install,  even  if  this  would  break  another
              package.

              conflicts: Install, even if  it  conflicts  with  another
              package.  This  is  dangerous,  for it will usually cause
              overwriting of some files.

              confmiss: Always install a  missing  configuration  file.
              This is dangerous, since it means not preserving a change
              (removing) made to the file.

              confnew: If a conffile has been modified  always  install
              the   new   version   without   prompting,   unless   the
              --force-confdef is also  specified,  in  which  case  the
              default action is preferred.

              confold:  If a conffile has been modified always keep the
              old version without prompting, unless the --force-confdef
              is  also  specified,  in which case the default action is
              preferred.

              confdef: If a conffile has been  modified  always  choose
              the default action. If there is no default action it will
              stop  to  ask  the   user   unless   --force-confnew   or
              --force-confold is also been given, in which case it will
              use that to decide the final action.

              overwrite: Overwrite one package’s  file  with  another’s
              file.

              overwrite-dir  Overwrite  one  package’s  directory  with
              another’s file.

              overwrite-diverted: Overwrite a  diverted  file  with  an
              undiverted version.

              architecture:   Process  even  packages  with  the  wrong
              architecture.

              bad-path: PATH is missing important programs, so problems
              are likely.

              not-root: Try to (de)install things even when not root.

              bad-verify:   Install   a   package   even  if  it  fails
              authenticity check.

       --ignore-depends=package,...
              Ignore   dependency-checking   for   specified   packages
              (actually, checking is performed, but only warnings about
              conflicts are given, nothing else).

       --new, --old
              Select new or  old  binary  package  format.  This  is  a
              dpkg-deb(1) option.

       --nocheck
              Don’t  read  or  check  contents  of  control  file while
              building a package.  This is a dpkg-deb(1) option.

       --no-act, --dry-run, --simulate
              Do everything which is supposed to  be  done,  but  don’t
              write  any changes. This is used to see what would happen
              with the specified  action,  without  actually  modifying
              anything.

              Be  sure to give --no-act before the action-parameter, or
              you might end up with  undesirable  results.  (e.g.  dpkg
              --purge  foo  --no-act  will  first purge package foo and
              then try to  purge  package  --no-act,  even  though  you
              probably expected it to actually do nothing)

       -R, --recursive
              Recursively  handle  all  regular  files matching pattern
              *.deb found at  specified  directories  and  all  of  its
              subdirectories.  This can be used with -i, -A, --install,
              --unpack and --avail actions.

       -G     Don’t install a package if a newer version  of  the  same
              package  is  already  installed.  This  is  an  alias  of
              --refuse-downgrade.

       --admindir=dir
              Change default administrative directory,  which  contains
              many   files   that  give  information  about  status  of
              installed or uninstalled  packages,  etc.   (Defaults  to
              /var/lib/dpkg)

       --instdir=dir
              Change default installation directory which refers to the
              directory where packages are to be installed. instdir  is
              also  the  directory  passed  to chroot(2) before running
              package’s installation  scripts,  which  means  that  the
              scripts see instdir as a root directory.  (Defaults to /)

       --root=dir
              Changing root changes instdir  to  dir  and  admindir  to
              dir/var/lib/dpkg.

       -O, --selected-only
              Only   process   the   packages  that  are  selected  for
              installation. The actual marking is done with dselect  or
              by  dpkg,  when  it handles packages. For example, when a
              package is  removed,  it  will  be  marked  selected  for
              deinstallation.

       -E, --skip-same-version
              Don’t  install  the  package  if  the same version of the
              package is already installed.

       --status-fd n
              Send  machine-readable  package   status   and   progress
              information  to  file  descriptor  n.  This option can be
              specified multiple times. The  information  is  generally
              one record per line, in one of the following forms:

              status: package: status
                     Package status changed; status is as in the status
                     file.

              status: package : error : extended-error-message
                     An error occurred. Unfortunately at  the  time  of
                     writing    extended-error-message    can   contain
                     newlines,   although   in   locales   where    the
                     translators  have  not made mistakes every newline
                     is followed by at least one space.

              status: file : conffile-prompt  :real-old’  ’real-newuseredited distedited
                     User is being asked a configuration file question.

              processing: stage: package
                     Sent  just before a processing stage starts. stage
                     is one  of  upgrade,  install  (both  sent  before
                     unpacking), configure, trigproc, remove, purge.

       --log=filename
              Log  status  change  updates  and  actions  to  filename,
              instead of the default /var/log/dpkg.log. If this  option
              is  given  multiple times, the last filename is used. Log
              messages are of  the  form  ‘YYYY-MM-DD  HH:MM:SS  status
              <state>  <pkg>  <installed-version>’  for  status  change
              updates; ‘YYYY-MM-DD HH:MM:SS <action> <pkg>  <installed-
              version>  <available-version>’ for actions where <action>
              is one of install, upgrade, remove, purge; and  ‘YYYY-MM-
              DD  HH:MM:SS conffile <filename> <decision>’ for conffile
              changes where <decision> is either install or keep.

       --no-debsig
              Do not try to verify package signatures.

       --no-triggers
              Do not run any triggers in  this  run  (activations  will
              still  be recorded).  If used with --configure package or
              --triggers-only package then the named  package  postinst
              will  still be run even if only a triggers run is needed.
              Use of this option may leave  packages  in  the  improper
              triggers-awaited and triggers-pending states. This can be
              fixed later by running: dpkg --configure --pending.

       --triggers
              Cancels a previous --no-triggers.

FILES

       /etc/dpkg/dpkg.cfg
              Configuration file with default options.

       /var/log/dpkg.log
              Default log file (see  /etc/dpkg/dpkg.cfg(5)  and  option
              --log).

       The  other  files listed below are in their default directories,
       see option --admindir to see how to change  locations  of  these
       files.

       /var/lib/dpkg/available
              List of available packages.

       /var/lib/dpkg/status
              Statuses   of  available  packages.  This  file  contains
              information  about  whether  a  package  is  marked   for
              removing or not, whether it is installed or not, etc. See
              section INFORMATION ABOUT PACKAGES for more info.

       The following files are components  of  a  binary  package.  See
       deb(5) for more information about them:

       control

       conffiles

       preinst

       postinst

       prerm

       postrm

ENVIRONMENT VARIABLES

       DPKG_NO_TSTP
              Define  this  to  something if you prefer dpkg starting a
              new shell rather than suspending itself,  while  doing  a
              shell escape.

       SHELL  The  program dpkg will execute when starting a new shell.

       COLUMNS
              Sets  the  number  of  columns  dpkg  should   use   when
              displaying formatted text. Currently only used by -l.

EXAMPLES

       To list packages related to the editor vi(1):
            dpkg -l '*vi*'

       To see the entries in /var/lib/dpkg/available of two packages:
            dpkg --print-avail elvis vim | less

       To search the listing of packages yourself:
            less /var/lib/dpkg/available

       To remove an installed elvis package:
            dpkg -r elvis

       To install a package, you first need to find it in an archive or
       CDROM. The "available" file shows that the  vim  package  is  in
       section "editors":
            cd /cdrom/hamm/hamm/binary/editors
            dpkg -i vim_4.5-3.deb

       To make a local copy of the package selection states:
            dpkg --get-selections >myselections

       You might transfer this file to another computer, and install it
       there with:
            dpkg --clear-selections
            dpkg --set-selections <myselections

       Note that this will not actually install or remove anything, but
       just set the selection state on the requested packages. You will
       need some other application to actually download and install the
       requested packages. For example, run apt-get dselect-upgrade.

       Ordinarily,  you  will  find  that  dselect(1)  provides  a more
       convenient way to modify the package selection states.

ADDITIONAL FUNCTIONALITY

       Additional functionality can be gained by installing any of  the
       following packages: apt, aptitude and debsums.

SEE ALSO

       aptitude(1),  apt(1),  dselect(1),  dpkg-deb(1),  dpkg-query(1),
       deb(5), deb-control(5), dpkg.cfg(5), and dpkg-reconfigure(8).

BUGS

       --no-act usually gives less information than might be helpful.

AUTHORS

       See /usr/share/doc/dpkg/THANKS for the list of people  who  have
       contributed to dpkg.