Provided by: arp-scan_1.6-2_i386 bug

NAME

       get-oui - Fetch the arp-scan OUI file from the IEEE website

SYNOPSIS

       get-oui [options]

DESCRIPTION

       get-oui  fetches the Ethernet OUI file from the IEEE website, and saves
       it in the format used by arp-scan.

       The  OUI  file  contains  all  of  the  OUIs  (Organizationally  Unique
       Identifiers)  that  have  been registered with IEEE.  Each OUI entry in
       the file specifies the first 24-bits of the  48-bit  Ethernet  hardware
       address,  leaving  the  remaining  24-bits  for  use by the registering
       organisation.  For example the OUI entry "080020",  registered  to  Sun
       Microsystems,   applies   to   any   Ethernet   hardware  address  from
       08:00:20:00:00:00 to 08:00:20:ff:ff:ff inclusive.  Each OUI  assignment
       represents a total of 2^24 (16,777,216) Ethernet addresses.

       Every  major  Ethernet  hardware  vendor  registers  an  OUI  for their
       equipment, and larger vendors will need to register more than one.  For
       example,  3Com have a total of 37 OUI entries.  Organisations that only
       produce a small number of Ethernet devices will  often  obtain  an  IAB
       registration instead.  See get-iab(1) for details.

       This script can be used to update the arp-scan OUI file from the latest
       data on the IEEE website.  Most of the Ethernet addresses in use belong
       to an OUI registration, so this is the most important of the files that
       arp-scan uses  to  decode  Ethernet  hardware  addresses.   You  should
       therefore  run get-oui occasionally to keep the arp-scan OUI file up to
       date.

       The      OUI      data      is      fetched      from      the      URL
       http://standards.ieee.org/regauth/oui/oui.txt  and  the  output file is
       saved to the file ieee-oui.txt in the current  directory.  The  URL  to
       fetch  the  data from can be changed with the -u option, and the output
       file name can be changed with the -f option.

       The ieee-oui.txt file that is produced by this script is used  by  arp-
       scan to determine the Ethernet card vendor from its hardware address.

       The directory that arp-scan will look for the ieee-oui.txt file depends
       on the options used when it was built.   If  it  was  built  using  the
       default options, then it will look in /usr/local/share/arp-scan.

OPTIONS

       -h     Display a brief usage message and exit.

       -f <fn>
              Write  the  output  to the specified file instead of the default
              ieee-oui.txt.

       -u <URL>
              Use the specified URL to fetch the raw OUI data from instead  of
              the default http://standards.ieee.org/regauth/oui/oui.txt.

       -v     Display verbose progress messages.

FILES

       ieee-oui.txt
              The default output file.

EXAMPLES

       $ get-oui -v
       Renaming ieee-oui.txt to ieee-oui.txt.bak
       Fetching OUI data from http://standards.ieee.org/regauth/oui/oui.txt
       Fetched 1467278 bytes
       Opening output file ieee-oui.txt
       9274 OUI entries written to file ieee-oui.txt

NOTES

       get-oui  is  implemented  in  Perl,  so  you  need  to  have  the  Perl
       interpreter installed on your system to use it.

       get-oui uses the LWP::Simple Perl module to fetch  the  data  from  the
       IEEE website. You must have this module installed on your system for it
       to work. This module is available on most distributions,  often  called
       libwww-perl.  It is also available in source form from CPAN.

       You  can  use  a  proxy  server  by defining the http_proxy environment
       variable.

AUTHOR

       Roy Hills <Roy.Hills@nta-monitor.com>

SEE ALSO

       arp-scan(1)

       get-iab(1)

       arp-fingerprint(1)

       http://www.nta-monitor.com/wiki/ The arp-scan wiki page.

                                March 30, 2007                      GET-OUI(1)