Provided by: xserver-xorg-input-tek4957_1.2.0-1build1_i386 bug
 

NAME

        tek4957 - Tektronix 4957 input driver
 

SYNOPSIS

        Section "InputDevice"
          Identifier "idevname"
          Driver "tek4957"
          Option "Device"   "devpath"
          ...
        EndSection
 

DESCRIPTION

        tek4957 is an Xorg input driver for the Tektronix 4957 tablet.
 
        The tek4957 driver functions as a pointer input device, and may be used
        as the X server’s core pointer.
        Please refer to xorg.conf(5) for general configuration details and  for
        options  that  can  be  used with all input drivers.  This section only
        covers configuration details specific to this driver.
 
                Option "Device" "devpath"
                    sets the path to the special file which  represents  serial
                    line  where  the tablet is plugged, for example /dev/ttyS0.
                    This option is mandatory.
 
                Option "DeviceName" "name"
                    sets the name of the X device.
 
                Option "Speed" "number"
                    sets the sampling rate, from 1 to 6.  Default is 6, maximum
                    speed.
 
                Option "Resolution" "number"
                    sets the resolution.
                        0 : 2340 dots  : 1/200 inch
                        1 : 2972 dots  : 1/10 mm
                        2 : 11700 dots : 1/1000 inch
                        3 : 11887 dots : 1/40 mm
                        4 : 5850 dots  : 1/500 inch
                        5 : 5944 dots  : 1/20 mm : default
                        6 : 4680 dots  : 1/400 inch
                        7 : 1170 dots  : 1/100 inch
                        8 : 12 dots    : 1 inch
                        9 : 24 dots    : 1/2 inch
 
                Option "TopX" "number"
                    X  coordinate  of  the  top  corner  of  the active zone. (
                    Default = 0 )
 
                Option "TopY" "number"
                    Y coordinate of the  top  corner  of  the  active  zone.  (
                    Default = 0 )
 
                Option "BottomX" "Inumber"
                    X  coordinate  of  the  bottom corner of the active zone. (
                    Default = full scale )
 
                Option "BottomY" "number"
                    Y coordinate of the bottom corner of  the  active  zone.  (
                    Default = full scale )
        Currently, only "Absolute" mode is supported ( Sorry )
        Xorg(1), xorg.conf(5), xorgconfig(1), Xserver(1), X(7).
 

AUTHORS

        Olivier DANET <odanet@caramail.com>