Ubuntu Manpage: smbmount -��@ smbfs��t統

Provided by: manpages-zh_1.5.1-1_all

NAME

       smbmount -����@ smbfs�����t統

�`� SYNOPSIS
       smbmount {service} {mount-point} [-o options]

�yz DESCRIPTION
       smbmount  可以裝載一粌inux  SMB檔案系統。它通常在帶 "-t smbfs" 選項執行
       mount(8) 命令時被作為mount.smbfs執行。當然核心必須支持smbfs檔案系統。

       smbmount使用的選項是用逗號分隔的一串key=value字串對的列表。It        is
       possible  to  send  options other than those listed here, assuming that
       smbfs supports them. If you get mount failures, check your  kernel  log
       for errors on unknown options.

       smbmount is a daemon. After mounting it keeps running until the mounted
       smbfs is umounted. It will log things that happen when in  daemon  mode
       using the "machine name" smbmount, so typically this output will end up
       in log.smbmount. The  smbmount process may also be called  mount.smbfs.

             �`�N

              smbmount  調用  smbmnt(8)來完成實際的裝載任務。你必須確保 smbmnt
              位於可以找到的路徑中。

��� OPTIONS
       username=<arg>
              指定聯接時的使用者名。如果不指定，程式會用USER這蚗藿疻僆q。這-
              蚇龠竣]接受"user%password",
              "user/workgroup"或"user/workgroup%password"形式的參數，允陰K碼和工作組作為使用者名的一部分同時被指定。

       password=<arg>
              指定SMB口令。如果不指定，將使用環境變量PASSWD.
              如果沒有指定，也沒有環境變量，
              smbmount會提示輸入口令，除非使用了guest選項。

              Note   that  passwords  which  contain  the  argument  delimiter
              character (i.e. a comma ',') will failed to be parsed  correctly
              on  the  command line. However, the same password defined in the
              PASSWD environment variable or a credentials  file  (see  below)
              will be read correctly.

       credentials=<filename>
              specifies  a file that contains a username and/or password.  The
              format of the file is:

              username = <value>
              password = <value>

              This is preferred over having passwords in plaintext in a shared
              file,  such  as  /etc/fstab.  Be sure to protect any credentials
              file properly.

       krb    Use kerberos (Active Directory).

       netbiosname=<arg>
              設定源NetBIOS主機名。預設是本機名。

       uid=<arg>
              設定裝載的檔案系統的使用者標識符。可以用使用者名或者UID數字兩種辦法來指定。

       gid=<arg>
              設定裝載的檔案系統的組標識符。可以用組名或者GID數字兩種方法來指定。

       port=<arg>
              設定遠程SMB系統的端口號。預設是139。

       fmask=<arg>
              設定檔案掩碼。這決定了本地檔案系統中遠程檔案的權-
              。它不是掩碼而是實際的檔案權。預設O根據當前的umask算出來的。

       dmask=<arg>
              設定目錄掩碼。這決定了本地檔案系統中遠程目錄的權-
              。它不是掩碼而是實際的目錄權。預設O根據當前的umask算出來的。

       debug=<arg>
              設定調試等級。對於跟蹤SMB的聯接問題非常有用。        建議的O4.
              如果設置得過高，會產生大量輸出，可能會掩誚野峈瑪擖X。

       ip=<arg>
              設定目標主機或IP地址。

       workgroup=<arg>
              設定目的工作組。

       sockopt=<arg>
              設定TCP套接字的一些選項。參見smb.conf(5)配置檔案中的socket
              options選項。

       scope=<arg>
              設定NetBIOSS圍。

       guest  不提示口令

       ro     以只讀方式裝載。

       rw     以讀寫方式裝載。

       iocharset=<arg>
              sets the charset used by the Linux side for codepage to  charset
              translations  (NLS).  Argument  should be the name of a charset,
              like iso8859-1. (Note: only kernel 2.4.0 or later)

       codepage=<arg>
              sets the codepage the server uses.  See  the  iocharset  option.
              Example value cp850. (Note: only kernel 2.4.0 or later)

       ttl=<arg>
              sets  how  long  a  directory  listing is cached in milliseconds
              (also affects visibility of  file  size  and  date  changes).  A
              higher  value means that changes on the server take longer to be
              noticed but it can give better performance on large directories,
              especially  over long distances. Default is 1000ms but something
              like 10000ms (10 seconds) is probably more  reasonable  in  many
              cases. (Note: only kernel 2.4.2 or later)

ENVIRONMENT VARIABLES

       The  variable  USER  may  contain  the username of the person using the
       client. This information is used only if the  protocol  level  is  high
       enough  to support session-level passwords. The variable can be used to
       set both username and password by using the format username%password.

       The variable PASSWD may contain the password of the  person  using  the
       client.  This  information  is  used only if the protocol level is high
       enough to support session-level passwords.

       The variable PASSWD_FILE may contain the pathname of a file to read the
       password from. A single line of input is read and used as the password.

BUGS

       Passwords and other options  containing  ,  can  not  be  handled.  For
       passwords  an  alternative way of passing them is in a credentials file
       or in the PASSWD environment.

       The credentials file  does  not  handle  usernames  or  passwords  with
       leading space.

       One  smbfs bug is important enough to mention here, even if it is a bit
       misplaced:

       o  Mounts sometimes stop working. This is usually  caused  by  smbmount
          terminating. Since smbfs needs smbmount to reconnect when the server
          disconnects, the mount will  eventually  go  dead.  An  umount/mount
          normally  fixes this. At least 2 ways to trigger this bug are known.

       Note that the typical response to a bug report is suggestion to try the
       latest  version  first.  So  please  try  doing  that first, and always
       include which versions you use of relevant software when reporting bugs
       (minimum: samba, kernel, distribution)

Ubuntu manuals

NAME

ENVIRONMENT VARIABLES

BUGS

SEE ALSO