Provided by: live-helper_1.0.5-1_all bug

NAME

       lh_config - create configuration for live-helper

SYNOPSIS

       lh_config
            [--apt apt|aptitude]
            [--apt-ftp-proxy URL]
            [--apt-http-proxy URL]
            [--apt-pdiffs enabled|disabled]
            [--apt-options OPTION|"OPTIONS"]
            [--aptitude-options OPTION|"OPTIONS"]
            [--apt-pipeline FIXME]
            [--apt-recommends enabled|disabled]
            [--apt-secure enabled|disabled]
            [-a|--architecture ARCHITECTURE]
            [-b|--binary-images iso|net|tar|usb-hdd]
            [--binary-filesystem fat16|fat32|ext2]
            [--binary-indices enabled|disabled|none]
            [--bootappend-install PARAMETER|"PARAMETERS"]
            [--bootappend-live PARAMETER|"PARAMETERS"]
            [--bootloader grub|syslinux|yaboot]
            [--bootstrap cdebootstrap|cdebootstrap-static|debootstrap|copy]
            [--bootstrap-config FILE]
            [-f|--bootstrap-flavour minimal|standard]
            [--bootstrap-keyring PACKAGE]
            [--cache enabled|disabled]
            [--cache-indices enabled|disabled]
            [--cache-packages enabled|disabled]
            [--cache-stages STAGE|"STAGES"]
            [--checksums enabled|disabled]
            [--chroot-build enabled|disabled]
            [--chroot-filesystem ext2|ext3|squashfs|plain|jffs2]
            [--clean]
            [-c|--conffile FILE]
            [--debconf-frontend dialog|editor|noninteractive|readline]
            [--debconf-nowarnings enabled|disabled]
            [--debconf-priority low|medium|high|critical]
            [--debian-installer
       enabled|cdrom|netinst|netboot|businesscard|live|disabled]
            [--debian-installer-distribution daily|CODENAME]
            [--debian-installer-preseedfile FILE|URL]
            [-d|--distribution CODENAME]
            [--dump]
            [-e|--encryption disabled|aes128|aes192|aes256]
            [--fdisk fdisk|fdisk.dist]
            [--genisoimage genisomage|mkisofs]
            [--grub-splash FILE]
            [--hooks FILE]
            [--hostname NAME]
            [--ignore-system-defaults]
            [--includes PATH]
            [--initramfs auto|live-initramfs|casper]
            [--interactive shell]
            [--iso-application NAME]
            [--iso-preparer NAME]
            [--iso-publisher NAME]
            [--iso-volume NAME]
            [--jffs2-eraseblock SIZE]
            [--keyring-packages PACKAGE|"PACKAGES"]
            [-l|--language LANGUAGE]
            [-k|--linux-flavours FLAVOUR|"FLAVOURS"]
            [--linux-packages "PACKAGES"]
            [--losetup losetup|losetup.orig]
            [--memtest memtest86+|memtest86|none]
            [-m|--mirror-bootstrap URL]
            [--mirror-binary URL]
            [--mirror-binary-security URL]
            [--mirror-chroot URL]
            [--mirror-chroot-security URL]
            [--mode debian|emdebian]
            [--net-root-filesystem nfs|cfs]
            [--net-root-mountoptions OPTIONS]
            [--net-root-path PATH]
            [--net-root-server IP|HOSTNAME]
            [--net-cow-filesystem nfs|cfs]
            [--net-cow-mountoptions OPTIONS]
            [--net-cow-path PATH]
            [--net-cow-server IP|HOSTNAME]
            [--net-tarball bzip2|gzip|tar|none]
            [-p|--packages-lists FILE]
            [--packages PACKAGE|"PACKAGES"]
            [--root-command sudo]
            [--use-fakeroot enabled|disabled]
            [--categories CATEGORY|"CATEGORIES"]
            [--security enabled|disabled]
            [--source enabled|disabled]
            [-s|--source-images iso|net|tar|usb-hdd]
            [--symlinks enabled|disabled]
            [--syslinux-splash FILE]
            [--syslinux-timeout SECONDS]
            [--syslinux-menu enabled|disabled]
            [--sysvinit enabled|disabled]
            [--tasksel aptitude|tasksel]
            [--tasks TASK]
            [--templates PATH]
            [--union-filesystem aufs|unionfs]
            [--virtual-root-filesystem ext3]
            [--virtual-root-size MB]
            [--exposed-root enabled|disabled]
            [--username NAME]
            [--win32-loader enabled|disabled]

       lh_config [live-helper options]

DESCRIPTION

       is a high-level command (porcelain) of  live-helper,  the  Debian  Live
       tool  suite.  It populates the configuration directory for live-helper.
       By default, this directory is named ’config’  and  is  created  in  the
       current directory where lh_config was executed.

       Attention:  lh_config  tries  to  be  smart  and sets defaults for some
       options depending on the setting of other options (e.g. the to be  used
       union  filesystem  depending on an etch system gets build or not). This
       means that  when  generating  a  new  configuration,  you  should  call
       lh_config  only  once  with  all  options specified. Calling it several
       times with only a subset of the options each can result in non  working
       configurations.  This  is also caused by the fact that lh_config called
       with one option only changes that option, and leaves everything else as
       is  unless  its  not  defined.  However, lh_config does warn about know
       impossible or likely impossible combinations that  would  lead  to  non
       working        live        systems.       If       unsure,       remove
       config/{binary,bootstrap,chroot,common,source}   and   call   lh_config
       again.

OPTIONS

       In  addition  to  its  specific options, lh_config also understands all
       generic live-helper options. See live-helper(7) for a complete list  of
       all generic live-helper options.

       --apt apt|aptitude
           defines  if  apt-get  or  aptitude is used to install packages when
           building the image. When building etch  images,  this  defaults  to
           aptitude. Every other distribution defaults to apt.

       --apt-ftp-proxy URL
           sets the ftp proxy to be used by apt. By default, this is empty but
           if the host has the environment variable  ftp_proxy  set,  apt-ftp-
           proxy gets automatically set to the value of ftp_proxy.

       --apt-http-proxy URL
           sets  the  http  proxy to be used by apt. By default, this is empty
           but if the host has the environment variable http_proxy  set,  apt-
           http-proxy gets automatically set to the value of http_proxy.

       --apt-pdiffs enabled|disabled
           defines whetever apt should use incremental package indices feature
           or not. This is enabled by default.

       --apt-options OPTION|
           defines the default options that will be appended to every apt call
           that  is  made  inside  chroot during the building of the image. By
           default, this is set to --yes to allow non-interactive installation
           of packages.

       --aptitude-options OPTION|"OPTIONS"
           defines the default options that will be appended to every aptitude
           call that is made inside chroot during building of  the  image.  By
           default,  this  is  set  to  --assume-yes  to allow non-interactive
           installation of packages.

       --apt-pipeline FIXME
           FIXME

       --apt-recommends enabled|disabled
           defines if apt should install recommended  packages  automatically.
           By  default,  this  is  enable  in  the debian mode and disabled in
           emdebian mode.

       --apt-secure enabled|disabled
           defines if apt should check repository signatures. This is  enabled
           by default.

       -a|--architecture ARCHITECTURE
           defines the architecture of the to be build image. By default, this
           is set to the host architecture. Note that  you  cannot  crossbuild
           for another architecture if your host system is not able to execute
           binaries  for  the  target  architecture  natively.  For   example,
           building amd64 images on i386 and vice versa is possile if you have
           a 64bit capable i386 processor and the right kernel.  But  building
           powerpc images on an i386 system is not possible.

       -b|--binary-images iso|net|tar|usb-hdd
           defines  the  image type to build. By default this is set to iso to
           build CD/DVD images.

       --binary-filesystem fat16|fat32|ext2
           defines the filesystem to be used in the image type. This only  has
           an  effect if the selected binary image type does allow to choose a
           filesystem. For example, when selection iso  the  resulting  CD/DVD
           has always the filesystem ISO9660. When building usb-hdd images for
           usb sticks, this is active. Note that it defaults to fat16  on  all
           architectures  except  sparc  where  it defaults to ext2. Also note
           that if you choose fat16  and  your  resulting  binary  image  gets
           bigger  than 2GB, the binary filesystem automatically gets switched
           to fat32.

       --binary-indices enabled|disabled|none
           defines if the resulting images should have binary indices  or  not
           and defaults to enabled. If set to none, no indices are included at
           all.

       --bootappend-install PARAMETER|"PARAMETERS"
           sets boot parameters specific to debian-installer, if included.

       --bootappend-live PARAMETER|"PARAMETERS"
           sets boot parameters specific to debian-live. A  complete  list  of
           boot  parameters  can be found, for etch, in the manpage of casper,
           for all other distributions in the manpage  of  live-initramfs.  On
           the images, a list of all parameters (without comments) is included
           in the /parameters.txt.

       --bootloader grub|syslinux|yaboot
           defines which bootloader is beeing used  in  the  generated  image.
           This  has  only  an  effect  if the selected binary image type does
           allow to choose the bootloader. For example, if you  build  a  iso,
           always  syslinux  (or  more  precise, isolinux) is being used. Also
           note that some combinations of binary images types and  bootloaders
           may  be  possible  but  live-helper  does  not  support  them  yet.
           lh_config  will  fail  to  create  such   a   not   yet   supported
           configuration  and  give a explanation about it. For usb-hdd images
           on amd64 and i386, the default is syslinux. yaboot is only used  on
           powerpc.

       --bootstrap cdebootstrap|cdebootstrap-static|debootstrap|copy
           defines  which  program  is  used  to  bootstrap the debian chroot,
           default is debootstrap. Note that if you set the bootstrap  program
           to  copy,  then  your host system is copied. This can be usefull if
           you want to convert/clone your existing host  system  into  a  live
           system,  however,  make  sure you do have enough free space as this
           can, depending on your host system, get quite big.

       --bootstrap-config FILE
           sets a custom configuration  file  for  the  boostrap  programm  of
           choice  and  is  empty  by  default. Refere to the documentation of
           debootstrap or cdebootstrap for more information about  that.  When
           the bootstrap program is set to copy, this has no effect.

       -f|--bootstrap-flavour minimal|standard
           defines  if  the  bootstrap  program  should bootstrap the standard
           system (all packages of priority required and important,  which  is
           the  default)  or  a  minimal  system  (only  packages  of priority
           required, plus apt).

       --bootstrap-keyring PACKAGE
           sets the archive keyring package to be  used.  Default  is  debian-
           archive-keyring.

       --cache enabled|disabled
           defines  globally  if  any  cache  should be used at all. Different
           caches can be controled through the their own options.

       --cache-indices enabled|disabled
           defines if downloaded package indices and lists  should  be  cached
           which is disabled by default. Enabling it would allow to rebuild an
           image completely  offline,  however,  you  would  not  get  updates
           anymore then.

       --cache-packages enabled|disabled
           defines  if  downloaded  packages  files  should be cached which is
           enabled by default. Disabling it does save space consumtion in your
           build  directory, but remember that you will cause much unnecessary
           traffic if you do a couple  of  rebuilds.  In  general  you  should
           always  leave  it  enabled,  however, in some particular rare build
           setups, it can be faster to refetch packages from the local network
           mirror rather than to utilize the local disk.

       --cache-stages enabled|disabled|STAGE|"STAGES"
           sets which stages should be cached. By default set to bootstrap. As
           an exception to the normal stage names, also  rootfs  can  be  used
           here  which  does  only  cache  the  generated  root  filesystem in
           filesystem.{dir,ext*,squashfs}. This is usefull during  development
           if you want to rebuild the binary stage but not regenerate the root
           filesystem all the time.

       --checksums enabled|disabled
           defines  if  the  binary  image  should  contain  a   file   called
           md5sums.txt  that  lists all files on the image together with their
           md5 checksums. This in turn can be used by live-initramfs’ built-in
           integrity-check  to  verify the medium if specified at boot prompt.
           In general, this should not be disabled and is an important feature
           of  live system released to the public. However, during development
           of very big images it can save some time  by  not  calculating  the
           checksums.

       --chroot-build enabled|disabled
           defines  whetever  live-helper should use the tools from within the
           chroot to build the binary image or not by using and including  the
           host  systems  tools.  This  is  a very dangerous option, using the
           tools of the host system can lead to tainted and even  non-bootable
           images  if  the  host systems version of the required tools (mainly
           these are the bootloaders such as syslinux, grub  and  yaboot,  and
           the  auxilliary  tools  such  as dosfstools, genisoimage, squashfs-
           tools and others) do not exactely match what is present  at  build-
           time  in  the  target  distribution.  Never  do disable this option
           unless you are exactely sure what you are doing and have completely
           understood its consequences.

       --chroot-filesystem ext2|ext3|squashfs|plain|jffs2
           defines   which  filesystem  type  should  be  used  for  the  root
           filesystem image. If you use plain, then  no  filesystem  image  is
           created  and  the  root  filesystem content is copied on the binary
           image filesystem as flat files. Depending on what binary filesystem
           you have choosen, it may not be possible to build with a plain root
           filesystem, e.g. fat16/fat32 and plain don’t work as linux does not
           support to run on them.

       --clean
           minimizes  config  directory  by  automatically removing unused and
           thus empty subdirectories.

       -c|--conffile FILE
           using a user specified alternative configuration file  in  addition
           to the normally used one in the config directory.

       --debconf-frontend dialog|editor|noninteractive|readline
           defines what value the debconf frontend should be set to inside the
           chroot. Note that setting it to anything by  noninteractive,  which
           is the default, makes your build asking questions during the build.

       --debconf-nowarnings enabled|disabled
           defines if warnings of debconf should be displayed or not. Warnings
           from debconf are generally very rare and by default, we skipp them,
           if  any,  in  order  to  keep  the  build  process   entirely   non
           interactive.

       --debconf-priority low|medium|high|critical
           defines what value the debconf priority shoul dbe set to inside the
           chroot. By default, it is set to critical, which means that  almost
           none  questions are displayed. Note that this only has an effect if
           you use any debconf frontend different from noninteractive.

       --debian-installer
       enabled|cdrom|netinst|netboot|businesscard|live|disabled
           defines which type, if  any,  of  the  debian-installer  should  be
           included in the resulting binary image. By default, no installer is
           included. All available flavours  except  live  are  the  identical
           configurations  used  on  the  installer  media produced by regular
           debian-cd.  When  live  is  choosen,  the  live-installer  udeb  is
           included  so that debian-installer will behave different than usual
           - instead of installing the debian system from  packages  from  the
           medium or the network, it installs the live system to the disk.

       --debian-installer-distribution daily|CODENAME
           defines the distribution where the debian-installer files should be
           taken  out  from.  Normally,  this  should  be  set  to  the   same
           distribution  as the live system. However, some times, one wants to
           use a newer or even daily built installer.

       --debian-installer-preseedfile FILE|URL
           sets the filename or  URL  for  an  optionally  used  and  included
           preseeding file for debian-installer.

       -d|--distribution CODENAME
           defines the distribution of the resulting live system.

       --dump
           prepares   a   report   of   the   currently  present  live  system
           configuration and the version of live-helper used. This is  usefull
           to  provide  if  you submit bug reports, we do get all informations
           required for us to locate and replicate an error.

       -e|--encryption disabled|aes128|aes192|aes256
           defines if the root filesystem  should  be  encrypted  or  not.  By
           default, this is disabled.

       --fdisk fdisk|fdisk.dist
           sets  the  filename  of  the fdisk binary from the host system that
           should be used. This is autodetected and does  generally  not  need
           any customization.

       --genisoimage genisomage|mkisofs
           sets  the  filename  of the genisoimage binary from the host system
           that should be used. This is autodetected and  does  generally  not
           need any customization.

       --grub-splash FILE
           defines  the  name  of  an  optional  to  be included splash screen
           graphic for the grub bootloader.

       --hooks FILE
           defines    which    hooks     available     in     /usr/share/live-
           helper/examples/hooks  should  be activated. Normally, there are no
           hooks executed. Make sure you know and understood the  hook  before
           you enable it.

       --hostname NAME
           sets the hostname of the live system.

       --ignore-system-defaults
           lh_config  by default reads system defaults from /etc/default/live-
           helper when generating a new live system config directory. This  is
           usefull  if  you  want  to  set  global  settings,  such  as mirror
           locations, and don’t want to specify them all of the time.

       --includes PATH
           sets the path to the includes that live-helper  is  going  to  use,
           e.g.  additional minimal documentation that you want to have on all
           live  systems.  By  default,  this  is  set   to   /usr/share/live-
           helper/includes/.

       --initramfs auto|live-initramfs|casper
           sets  the  name  of  package that contains the live system specific
           initramfs modification. By default, auto is used, which means  that
           at  build  time of the image rather than on configuration time, the
           value will be expanded to casper when building etch systems and  to
           live-initramfs for all other systems.

       --interactive shell
           defines  if  after the chroot stage and before the beginning of the
           binary stage, a interactive shell login should be  spawned  in  the
           chroot  in order to allow you to do manual customizations. Once you
           close the shell with logout or exit, the  build  will  continue  as
           usual. Note that it’s strongly discouraged to use this for anything
           else than testing. Modifications that  should  be  present  in  all
           builds  of  a  live  system  should be properly made through hooks.
           Everything else destroys the beauty of  being  able  to  completely
           automatise  the  build  process  and  making it non interactive. By
           default, this is of course disabled.

       --iso-application NAME
           sets the APPLICATION field in the  header  of  a  resulting  CD/DVD
           image  and  defaults  to  "Debian  Live"  in  debian  mode,  and to
           "Emdebian Live" in emdebian mode.

       --iso-preparer NAME
           sets the PREPARER field in the header of a resulting CD/DVD  image.
           By    default    this    is    set    to    "live-helper   VERSION;
           http://packages.qa.debian.org/live-helper",  whereas   VERSION   is
           exanded  to  the  version of live-helper that was used to build the
           image.

       --iso-publisher NAME
           sets the PUBLISHED field in the header of a resulting CD/DVD image.
           By  default,  this  is  set to ’Debian Live project; http://debian-
           live.alioth.debian.org/; debian-live@lists.debian.org’. Remember to
           change   this   to  the  appropriate  values  at  latest  when  you
           distributing custom and unofficial images.

       --iso-volume NAME
           sets the VOLUME field in the  header  of  a  resulting  CD/DVD  and
           defaults to ’Debian Live (DATE)’ in debian mode, and ’Emdebian Live
           (DATE)’ in emdebian mode, whereas DATE is expanded with the current
           date and time of the generation.

       --jffs2-eraseblock SIZE
           FIXME

       [--keyring-packages PACKAGE|
           sets the keyring package or additional keyring packages. By default
           this is set to debian-archive-keyring.

       -l|--language LANGUAGE
           sets the language of a  live  system  by  installing  l10n  related
           packages  and  enables  generation  of  the correct locales through
           automatically setting the right boot parameters.

       -k|--linux-flavours FLAVOUR|
           sets the kernel flavours to be installed. Note  that  in  case  you
           specify  more  than  that  the first will be configured the default
           kernel that gets bootet.

       --linux-packages
           sets the internal name of the kernel packges naming scheme. If  you
           use  debian  kernel packges, you will not have to adjust it. If you
           decide to use custom kernel packages that do not follow the  debian
           naming  scheme,  remember  to  set  this  option to the stub of the
           packages only (for debian this is linux-image-2.6), so  that  STUB-
           FLAVOUR  results  in  a  valid package name (for debian e.g. linux-
           image-2.6-486). Preferably you use the meta package name,  if  any,
           for  the  stub, so that your configuration is ABI independent. Also
           don’t forget that you have to include stubs of the  binary  modules
           packages  for  unionfs or aufs, and squashfs if you built them out-
           of-tree.

       --losetup losetup|losetup.orig
           sets the filename of the losetup binary from the host  system  that
           should  be  used.  This is autodetected and does generally not need
           any customization.

       --memtest memtest86+|memtest86|none
           defines if memtest, memtest86+ or no memory tester at all should be
           included  as  secondary  bootloader  configuration.  This  is  only
           available on amd64 and i386 and defaults to memtest86+.

       -m|--mirror-bootstrap URL
           sets the location of the debian package mirror that should be  used
           to bootstrap from.

       --mirror-binary URL
           sets  the  location of the debian package mirror that should end up
           configured in the final image and which is the one a user would see
           and  use.  This  has not necessarily to be the same that is used to
           build the image, e.g. if you use a local mirror but want to have an
           official  mirror  in  the image. By default, the same value that is
           used for --mirror-chroot is used here unless specified different.

       --mirror-binary-security URL
           sets the location of the debian security package mirror that should
           end  up  configuered in the final image. By default, the same value
           that is used  for  --mirror-chroot-security  is  used  here  unless
           specified different.

       --mirror-chroot URL
           sets the location of the debian package mirror that will be used to
           fetch the packages in order to build the live system.  By  default,
           this  points to http://ftp.us.debian.org/debian/ which may not be a
           good default if you live outside the U.S.

       --mirror-chroot-security URL
           sets the location of the debian security package mirror  that  will
           be used to fetch the packages in order to build the live system. By
           default, this points to http://security.debian.org/debian/.

       --mode debian|emdebian
           defines a global mode to load project specific defaults. By default
           this is set to debian.

       --net-root-filesystem nfs|cfs
           defines  the  filesystem  that will be configured in the bootloader
           configuration for your netboot image. This defaults to nfs.

       --net-root-mountoptions OPTIONS
           sets additional options for mounting the root filesystem in netboot
           images and is by default empty.

       --net-root-path PATH
           sets  the  file  path  that  will  be  configured in the bootloader
           configuration for your netboot image. This defaults to /srv/debian-
           live in debian mode and to /srv/emebian-live when being in emdebian
           mode.

       --net-root-server IP|HOSTNAME
           sets the IP or hostname that will be configured in  the  bootloader
           configuration  for  the root filesystem of your netboot image. This
           defaults to 192.168.1.1.

       --net-cow-filesystem nfs|cfs
           defines  the  filesystem  type  for  the  copy-on-write  layer  and
           defaults to nfs.

       --net-cow-mountoptions OPTIONS
           sets  additional  options  for  mounting the copy-on-write layer in
           netboot images and is by default empty.

       --net-cow-path PATH
           defines the path  to  client  writable  filesystem.  Anywhere  that
           client_mac_address  is  specified  in  the path live-initramfs will
           substitute the MAC address of the client delimited with hyphens.

           Example:
           /export/hosts/client_mac_address
           /export/hosts/00-16-D3-33-92-E8

       --net-cow-server IP|HOSTNAME
           sets the IP or hostname that will be configured in  the  bootloader
           configuration  for  the  copy-on-write  filesystem  of your netboot
           image and is by default empty.

       --net-tarball bzip2|gzip|tar|none
           defines the format of the netboot image. Choosing tar results in  a
           not  compressed  tarball,  bzip2  and  gzip  in  a bzip2 resp. gzip
           compressed tarball. Choosing none leads to no tarball at  all,  the
           plain  binary  directory  is  considered  the  output in this case.
           Default is gzip.

       -p|--packages-lists FILE
           defines  which  lists  available  in   /usr/share/live-helper/lists
           should  be  used. By default, this is set to standard. Note that in
           case you have local packages lists, you  also  need  to  list  them
           here.  Putting  them  into config/chroot_local-packageslists is not
           enough.

       --packages PACKAGE|"PACKAGES"
           defines one or more packages to be installed in  the  live  system.
           This  is  a  quick  and convenient place to add a few packages when
           building an image (limited by the max length  of  shell).  Packages
           that  should  be  permanently  installed should be put into a local
           packages list.

       --root-command sudo
           controls if live-helper should use sudo  internally  to  build  the
           live  image. Note that this is not well tested and that you should,
           when relaying on sudo, call the individual live-helper command with
           sudo itself.

       --use-fakeroot enabled|disabled
           FIXME

       --categories CATEGORY|"CATEGORIES"
           defines  which  package  categories  of  a  debian packages archive
           should be used for configured debian package mirrors.  By  default,
           this  is  set  to  main.  Remember  to  check  the licenses of each
           packages  with  respect  to  their   redistributability   in   your
           juristiction when enabling contrib or non-free with this mechanism.

       --security enabled|disabled
           defines if the security  repositories  specified  in  the  security
           mirror options should be used or not.

       --source enabled|disabled
           defines  if a corresponding source image to the binary image should
           be build. By default this is disabled because most  people  do  not
           require  this  and  would  require  to  download quite a few source
           packages. However, once you start distributing your live image, you
           should make sure you build it with a source image alongside.

       -s|--source-images iso|net|tar|usb-hdd
           defines the image type for the source image. Default is tar.

       --symlinks enabled|disabled
           defines  if  the  symlink  hack  should be enabled or disabled. The
           symlink hack converts all absolute symlinks to  relative  ones.  By
           default this is disabled and in general there is no need or gain to
           enable it. If you are in a special situation  that  requires  this,
           you will know.

       --syslinux-splash FILE
           defines the file of the syslinux splash graphic that should be used
           instead of the default one.

       --syslinux-timeout SECONDS
           defines the timeout the syslinux bootloader should wait  for  input
           from  the  user at the bootprompt prior booting the default kernel.
           This defaults to 0 which means it will wait forever.

       --syslinux-menu enabled|disabled
           defines if syslinux should be make use of the vgamenu  capabilities
           or not.

       --sysvinit enabled|disabled
           defines  it  the  sysvinit  hack should be enabled or disabled. The
           sysvinit hack disables all non-essential services from starting  up
           at  bootup  in order to reduce overall boottime. By default this is
           disabled and in general there you don’t want to enable it.

       --tasksel aptitude|tasksel
           selects which program is used to install tasks. By default, this is
           set to tasksel.

       --tasks TASK
           defines  one  or  more  package  tasks  to be installed in the live
           system. This is a quick and convenient  way  to  get  a  reasonable
           default selection of packages suitable for most users when building
           an image, but it results in quite big images. If you want  to  have
           finer  grained  package selections,  local packages lists should be
           used instead.

       --templates PATH
           sets the path to the templates that live-helper is  going  to  use,
           e.g.  for  bootloaders. By default, this is set to /usr/share/live-
           helper/templates/.

       --union-filesystem aufs|unionfs
           defines whetever to use UnionFS or Aufs  as  stackable  unification
           filesystem.  When  building  etch images, this defaults to unionfs,
           everywhere else to aufs.

       --virtual-root-filesystem ext3
           defines what filesystem to format the root filesystem when building
           virtual-hdd images.

       --virtual-root-size MB
           defines  what  size  the  virtual-hdd  image  should  be. Note that
           although the default is set to 10000 (= 10GB),  it  will  not  need
           10GB  space  on  your  harddisk  as the files are created as sparse
           files.

       --exposed-root enabled|disabled
           FIXME

       --username NAME
           sets the name of the account  of  the  default  user  in  the  live
           system.

       --win32-loader enabled|disabled
           defines  if  win32-loader should be included in the binary image or
           not.

ENVIRONMENT

       All  command  line  switches  can  also  be   specified   through   the
       corresponding  environment  variable.  Environment  variables  are name
       LH_FOO, means, e.g. --apt-ftp-proxy becomes LH_APT_FTP_PROXY.  However,
       this generally should not be used.

FILES

       /etc/default/live-helper

       An  optional,  global configuration file for lh_config variables. It is
       useful to specify a few system wide defaults, like LH_MIRROR_BOOTSTRAP.
       This feature can be disabled by specifying the --ignore-system-defaults
       option.

SEE ALSO

       live-helper(7)

       This program is a part of live-helper.

HOMEPAGE

       More information about live-helper and the Debian Live project  can  be
       found in the homepage at <http://debian-live.alioth.debian.org/> and in
       the manual at <http://live.debian.net/manual/>.

BUGS

       Report bugs by submitting a bugreport for the  live-helper  package  in
       the  Debian Bug Tracking System at <http://bugs.debian.org/> or write a
       mail to the mailinglist at <debian-live@lists.debian.org>.

AUTHOR

       live-helper was written by Daniel Baumann <daniel@debian.org>  for  the
       Debian project.