Provided by: libgps-dev_2.39-5_i386
libgpsd - service library for GPS applications
int gpsd_open_dgps(char * dgpsserver);
void gpsd_init(struct gps_device_t *session, struct * gps_context_t *,
char * device);
int gpsd_activate(struct gps_device_t *session, bool reconfigurable);
void gpsd_deactivate(struct gps_device_t * session);
gps_mask_t gpsd_poll(struct gps_device_t * session);
void gpsd_wrap(struct gps_device_t * session);
void gpsd_report(int d, const char * fmt, ...);
libgps is a service library which supports querying GPS devices; link
it with the linker option -lgps. There are two interfaces supported in
it; one high-level interface that goes through gpsd(1) and is intended
for concurrent use by several applications, and one low-level interface
that speaks directly with the serial or USB device to which the GPS is
attached. This page describes the low-level interface, which gpsd(1)
itself uses. See gpsd(3) for a description of the high-level interface,
which is almost certainly what you want.
Calling gpsd_init() initializes a session structure to hold the data
collected by the GPS.
The second argument must be a context structure. The library will use
it for information that need to be shared between sessions; presently
this includes the leap-second correction and possibly a pointer to a
shared-memory segment used to communicate with the Network Time
After the session structure has been set up, you may modify some of its
This member should hold the path name of the device.
Communication speed in bits per second. For NMEA or SiRF devices,
the library automatically hunts through all plausible baud rates,
stopping on the one where it sees valid packets. By setting this
field you can designate a speed to be tried at the front of the
A hook function to be executed on each NMEA sentence or as it is
read from the GPS. The data from non-NMEA GPSes like the EarthMate
will be translated to an NMEA sentence before being passed to the
hook. Parameters are a pointer to a gps_data structure full of
parsed data, the sentence, the length of the sentence, and a
gpsd_activate() initializes the connection to the GPS.
gpsd_deactivate() closes the connection. These functions are provided
so that long-running programs can release a connection when there is no
activity requiring the GPS, and re-acquire it later.
gpsd_poll() queries the GPS and updates the part of the session
structure that holds position, speed, GPS signal quality, and other
data returned by the GPS. It returns a mask describing which fields
gpsd_wrap() ends the session, implicitly performing a
The calling application must define one additional function:
gpsd_report(). The library will use this to issue ordinary status
messages. Use first argument of 0 for errors, 1 for ordinary status
messages, and 2 or higher for debugging messages.
The low-level functions do not allocate or free any dynamic storage.
They can thus be used in a long-running application (such as gpsd(8)
itself) with a guarantee that they won´t cause memory leaks.
Writes to the context structure members are not guarded by a mutex.
gpsd(8), cgps(1), libgpsd(3).
Eric S. Raymond <firstname.lastname@example.org> based partly on earlier work by Remco
Treffkorn, Derrick Brashear, and Russ Nelson.