Provided by: freebsd-manpages_7.2-1_all bug


     hptrr - HighPoint RocketRAID device driver


     To compile this driver into the kernel, place the following line in your
     kernel configuration file:

           device hptrr
           device scbus
           device da

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):



     The hptrr driver provides support for HighPoint’s RocketRAID based RAID

     These devices support SATA/ATA disk drives and provide RAID0 (striping),
     RAID1 (mirroring), and RAID5 functionality.


     The hptrr driver supports the following RAID controllers:

     ·   RocketRAID 172x series
     ·   RocketRAID 174x series
     ·   RocketRAID 2210
     ·   RocketRAID 222x series
     ·   RocketRAID 2240
     ·   RocketRAID 230x series
     ·   RocketRAID 231x series
     ·   RocketRAID 232x series
     ·   RocketRAID 2340
     ·   RocketRAID 2522


     The hptrr driver only works on the i386 and amd64 platforms as it
     requires a binary blob object from the manufacturer which they only
     supply for these platforms.  The hptrr driver does not work on i386 with
     pae(4) enabled.

     This driver does not support the RR182x series controller.  See the
     hptmv(4) manual page for details on support.

     This driver supersedes the older rr232x driver.


     cam(4), hptmv(4), loader(8)


     The hptrr device driver first appeared in FreeBSD 6.3.


     The hptrr device driver was written by HighPoint Technologies, Inc., and
     ported to FreeBSD by Scott Long.  This manual page was written by David
     E. O’Brien.


     The hptrr driver does not support manipulating the RAID from the OS,
     RAIDs need to be set up from the on-board BIOS.