Provided by: searchandrescue_0.8.2-10ubuntu1_i386 bug


       SearchAndRescue - Air rescue flight simulator


       SearchAndRescue [options] [GUI_options]


       Helicopter based search and rescue flight simulator, pilot a variety of
       user editable rescue aircraft through customizeable missions and rescue
       victims in distress.  Uses OpenGL and glX for graphics, Ylib for sound,
       and libjsw for joystick support (not available on all platforms).


       --config <file>
              Load configuration from <file>.

              Same as --config.

       -f     Same as --config.

       --control <type>
              Specify which controller to use at  start  up.   <type>  can  be
              keyboard or joystick.

       -c     Same as --control.

              Use direct hardware rendering (default).

              Use software rendering instead of direct hardware rendering.

              Always  perform  full  (not  partial)  menu  redraws  (slow  but
              required for certain accelerated video cards).

       --display <address>
              Specifies display address (UNIX/X version only).

       --font <name>
              Specifies the default font to use on GUI related outputs. Reffer
              to your GUI manual for the proper font name formats.

       --geometry <WxH+X+Y>
              Specifies   the   geometry   of  the  toplevel  window,  example
              "--geometry 640x480+100+120" to  make  the  window  640  by  480
              pixels  in  size and at coordinate position 100,120 (relative to
              the root window/desktop).

              Specifies to switch to full screen on startup, use this  if  and
              only  if  your  GUI  does  not  support manual switching to full
              screen. You may need  to  specify  the  --geometry  argument  to
              specify the size of the full screen resolution.

       --aspect_offset <coeff>
              Specifies  a  floating coefficient value to be applied to screen
              aspect calculations, example a value of -0.2 when your screen is
              800  by  600 then the aspect would be 800/600 + (-0.2) = 1.333 -
              0.2 = 1.133.

       --recorder <address>
              Specifies recorder address (UNIX/Y version only).

              Do not connect to sound server at startup (overrides  the  value
              set in the configuration).

              No  menu  background images (speeds up the redrawing when in the

              Do not print routine messages to stdout.

              Print  debugging  runtime  detection  of  various  resources  to
              stdout.  This  may help detect points of failure or crash during
              startup or exiting.

              Print debugging  of  internal  runtime  information  (messy  and
              terse)  to  stdout.  This  will only print debugging information
              about internal resources belonging to the program.

       --help Prints (this) help screen and exits.

              Prints version information and exits.


              Default desktop icon for this program.

              Local configuration file.

              Data directory for this program’s proprietery data files.

              Preset values list for humanoid objects.

              List of music file referances for corresponding situations.

              List of default textures to be loaded during simulation.

              Preset weather values for a list of defined weather  conditions.


       SEARCHANDRESCUE_DATA Specifies alternate global data directory for this

              Specifies the address to the X display.

       HOME   Specifies the home directory.

              Specifies the gamma value, used only on software rendering  with
              the Mesa3D library.


       To run this program the standard way, type:

       # SearchAndRescue &

       To run in full screen mode at 640x480 resolution, type:

       # SearchAndRescue --geometry "640x480" --fullscreen &

       To specify the geometry and force software rendering, type:

       # SearchAndRescue --geometry "640x480+240+350" --software_rendering &


       General keys (can be used anywhere):

       CTRL + F11
              Toggles between full screen and windowed modes.

       CTRL + ]
              Increase resolution to the next step.

       CTRL + [
              Decrease resolution to the previous step.

       CTRL + C
              Screen shot.

       Menu keys:

       TAB    Focus next.

       SHIFT + TAB
              Focus previous.

              Focus change/highlight/scroll.

       ENTER  Activate focused.

       Simulation keys:

       F1     Display ‘quick help’.

       F2     Switch to cockpit view.

       F3     Spot view.

       F4     Fly by tower view.

       F5     Rescue basket view.

       LEFT   Bank left.

       RIGHT  Bank right.

       DOWN   Pitch down.

       UP     Pitch up.

       CTRL + LEFT
              Heading left.

       CTRL + RIGHT
              Heading right.

              Change camera direction or position.

              Normalize view.

       PGUP   Increase throttle.

       PGDN   Decrease throttle.

       HOME   Elevator trim down or slew up in slew mode.

       END    Elevator trim up or slew down in slew mode.

       CTRL + HOME
              Elevator trim center.

       MINUS  Zoom out.

       PLUS   Zoom in.

       CTRL + MINUS
              Rescue basket hoist out.

       CTRL + PLUS
              Rescue basket hoist in.

       E      Start up engines.

       SHIFT + E
              Turn engines off.

       Y      Tilt rotors/pitch engines.

       G      Raise/lower landing gears (retractable gears only).

       P      Select hoist deployment type.

       D      Close/open door.

       O      Toggle strobes (flashing lights).

       L      Toggle lighting (including spot light).

       SHIFT + L
              Toggle spot light.

       CTRL + L
              Center spot light.

       H      HUD and outside text brighten.

       SHIFT + H
              HUD and outside text darken.

       A      Autopilot/autohover on/off.

       M      Map view.

       W      Select next way point.

       SHIFT + W
              Select previous way point.

       I      FLIR (night vision).

       F      Fuel status and aloft time left dependent of available fuel.

       SHIFT + F
              Transfer fuel from external fuel tanks.

       CTRL + F
              Jetteson external fuel tanks.

       S      Print scores, payload, occupancy, and mission status.

       PERIOD Wheel brakes.

              Parking brakes.

       B      Deploy/retract air brakes.

       R      Refuel  and/or repair (only when landed on a helipad with refuel
              and/or repair facilities).

       Z      Decelerate time (slow motion).

       SHIFT + Z
              Accelerate time (compress time).

       CTRL + Z
              Normalize time rate.

       CTRL + W
              Change weather.

       CTRL + A
              Slew/flight toggle.

       /      Literal command.

       T      Increase time of day (does not affect other timmings).

       SHIFT + T
              Decrease time of day (does not affect other timmings).

       CTRL + D
              Adjust flight physics difficulty.

       CTRL + S
              Adjust sound level.

       CTRL + U
              Change units.

       F9     Toggle ground base texture (not objects or landmarks).

       F10    Toggle atmosphere.

       F11    Toggle object texturing.

       F12    Toggle clouds and horizon.

       SHIFT + F9
              Toggle dual pass depth.

       SHIFT + F10
              Toggle celestial objects.

       SHIFT + F11
              Toggle smoke trails.

       SHIFT + F12
              Toggle rotor wash effects.


       In simulation joystick functions:

              Bank and pitch (respectivly).



       HAT    Camera direction/position.

       Joystick      button      functions       are       mappable,       see



       Dan Stimits
              Code design consultant and beta testing

       Stefan Marion
              Beta testing and aircraft design consultant

       Capt Tara Milana
              Head   programmer,  3d  models,  flight  dynamics,  and  scenery
              graphics artist


       Search and Rescue home page